WVC54GCA Config issues
Hi Linksys,
I have V1.00R24 of the firmwar installed. The PC is a HP Quad core running Vista Ultimate. Router is a Netgear DG834G ADSL Router (Sorry).
Can you please assist with the following?
Wireless Setup.
I cannot set up the camera with either dynamic or static connection by manually configuring the WEP and IP settings?
The camera works in a wired configuration.
Remote Access.
I signed up for the TZO DDNS service and surprising it worked once in a wired configuration but not again. I am happy to organise a static IP address in place of the TZO service if that is an alternative.
PC Based Software.
The PC based software appears to working inconsistently in terms of accessing the camera and performing and setting changes.
Remote Access & Recording.
I am having no luck with receiving emails recordings, etc via email or stored on the PC.
Any ideas would be great please?
Thank you, Mark.
Wireless: Not much to it besides making sure your settings match and unplugging and plugging.
TZO: Put the TZO information in your router not in your camera.
PC Recording Software: I like the software you can download off of the WVC2300 page.
Remote: Have your ISP give you your settings for your smtp server for emails.
Similar Messages
-
I can sync bookmarks in firefox for android, but only the ones that are on Bookmarks main folder, the folders create below the main folder are not synchronized. Is this a bug or a config issue?
ThanksThanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?
-
Hi all,
Hopefully this will be a nice easy one for you all.
I have recently configured and installed an 851 router successfully :) I now only have one issue, the damn thing switches itself off after a period of inactivity!
If I want to use it again I have to issue a reset command then a boot command.
This takes me to the:
router>
prompt. I then have to issue a copy start run command. And then a no shut on each of my interfaces.
Obviously I would just like the router to stay up and running. But I cant work out how to do it. Im sure that this is just a simple config issue and I would dearly love for you all to solve it!
If any of you know the answer can you please provide clear an accurate commands as I will copy it parrott fashion into the router.
Thank you all in advance.
StuartHello,
as spremkumar already pointed out the config register usually is set to 0x2102. You can reconfigure the register by:
Router#configute terminal
Router(config)#config-register 0x2102
Router(config)#end
Then perform a reload and check whether the config is present after the router finished booting.
Hope this helps! Please rate all posts.
Regards, Martin -
I have read a few posts re installation issues and 192.168.1.115 ip errors trying to get the camera to work. I dont find a resolution that helps me so thought I would post before I launch the camera with trash!
Im hooked up on a netgear WNR854T router on with gateway 192.168.11.1. When running setup the settings reproted back are;
Status: Unconfigured
Camera Name: MyCamera
NW Config: DHCP
IP: 192.168.1.115
SN Mask 255.255.255.0
DF GW 0.0.0.0
I then proceed through set up, setting both DHCP and static on different attempts and manualy configuring wireless as it fails to find on search or after many refresh.
Encryption is - WPA-PSK [TKIP] + WPA2-PSK [AES]
I have tried many hard reboots all without success, receiving "Save configuration has failed!"
I am running W7 and camera does not appear in [Network] and so far has not apperead under [Attached Devices] on router.
HELP!!!!!!!!!!!!WVC54GCA Camera works on the DHCP. If you hardwired the Camera to the Router, your router should automatically assign a IP to your Camera. To know the camera IP address you need to login to the camera setup page and under the DHCP Client table list you will find the Camera IP address. Using that IP address you can login to your camera and make the changes on it.
If its not listed under the DHCP Client table list, then you need to Press and Hold the reset button on your camera for 30sec.. Release the Reset button and then after 30sec plug the power to the Camera.... Now check if the Camera is listed under the DHCP Client table. If yes then you can use that IP address to login to the camera setup page and make the changes on your Camera. -
HP LaserJet p1102w with Mac OS X10.6.8 HTML config issue
Hello,
I have been using this printer for a few years now and have moved house a few times and successfully updated the wireless settings on the printer through HTML config. Lately, in printer utilities the HTML config button does not show up where it is meant to.
I have installed / uninstalled the latest firmware, software drivers, printers and made sure they were platform specific.
This is really annoying.
Is there old software available for download? it was working fine until the recent update - which I did so I could use the eprint features.
Best regards
Costas
Printer:
HP LaserJet p1102w, Firmware datacode = 20130213
Computer:
Macbook white, late 2008 model: 2.4Ghz Core2Duo, 4G RAM with OS X 10.6.8From the name of the printer, it looks like you have it installed through a USB connection.
Here is what I would. First go into “System Preferences” and then select either “Print & Scan” or "Print & Fax".
Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.
NOTE: This will delete all printers.
After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
Once you have downloaded the driver package and completed the installation, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus (+) sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box. Make sure that says the name of your printer and not AirPrint. Next make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
LIRC-0.9.1: Remote not working, scancodes, config issues
Hi,
I'm using arch (kernel 3.16.0-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux), a TechnoTrend USB IR Receiver and my custom remote (not covered by existing configs). I installed lirc and lirc-utils via testing repo (lirc-0.9.1). My problem is that I can access my device, but irw gives me no output at all.
At first some outputs:
ir-keytable:
Found /sys/class/rc/rc0/ (/dev/input/event17) with:
Driver ttusbir, table rc-tt-1500
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: RC-5
Name: TechnoTrend USB IR Receiver
bus: 3, vendor/product: 0b48:2003, version: 0x0101
Repeat delay = 500 ms, repeat period = 125 ms
output of "ir-keytable -t" for numbers 1-6 on my remote:
Testing events. Please, press CTRL-C to abort.
1408117586.815011: event type EV_MSC(0x04): scancode = 0x01
1408117586.815011: event type EV_SYN(0x00).
1408117586.934967: event type EV_MSC(0x04): scancode = 0x01
1408117586.934967: event type EV_SYN(0x00).
1408117587.702986: event type EV_MSC(0x04): scancode = 0x02
1408117587.702986: event type EV_SYN(0x00).
1408117588.366958: event type EV_MSC(0x04): scancode = 0x03
1408117588.366958: event type EV_SYN(0x00).
1408117588.486983: event type EV_MSC(0x04): scancode = 0x03
1408117588.486983: event type EV_SYN(0x00).
1408117589.094926: event type EV_MSC(0x04): scancode = 0x04
1408117589.094926: event type EV_SYN(0x00).
1408117589.214920: event type EV_MSC(0x04): scancode = 0x04
1408117589.214920: event type EV_SYN(0x00).
1408117590.926837: event type EV_MSC(0x04): scancode = 0x05
1408117590.926837: event type EV_SYN(0x00).
1408117591.046834: event type EV_MSC(0x04): scancode = 0x05
1408117591.046834: event type EV_SYN(0x00).
1408117592.446769: event type EV_MSC(0x04): scancode = 0x06
1408117592.446769: event type EV_SYN(0x00).
1408117592.566769: event type EV_MSC(0x04): scancode = 0x06
1408117592.566769: event type EV_SYN(0x00).
My remote config file looks like this:
# Please make this file available to others
# by sending it to <[email protected]>
# this config file was automatically generated
# using lirc-0.9.0(devinput) on Thu Aug 7 15:10:35 2014
# contributed by
# brand: Test
# model no. of remote control:
# devices being controlled by this remote:
begin remote
name BlackFlatOne
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_POWER 0x0c
KEY_MUTE 0x0a
KEY_SELECT 0x38
KEY_Z 0x0f
KEY_1 0x01
KEY_2 0x02
KEY_3 0x03
KEY_4 0x04
KEY_5 0x05
KEY_6 0x06
KEY_7 0x07
KEY_8 0x08
KEY_9 0x09
KEY_0 0x00
KEY_TV 0x1e
KEY_LEFT 0x11
KEY_RIGHT 0x10
KEY_UP 0x20
KEY_DOWN 0x21
KEY_ENTER 0x0d
KEY_CHANNELUP 0x12
KEY_CHANNELDOWN 0x13
KEY_VOLUMEUP 0x2b
KEY_VOLUMEDOWN 0x2c
KEY_STOP 0x0b
KEY_RECORD 0x1f
KEY_CAMERA 0x0e
KEY_ESC 0x29
end codes
end remote
I start lirc manually with
lircd --driver=devinput --device=/dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir BlackFlatOne -n
After starting lirc, I start irw, but I get no response at all when pressing buttons on my remote.
I already tried a
cat /dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir
(lirc and irw not running, of course) and this gives me cryptic symbols when pressing buttons on my remote, so the IR receiver doesn't seem to be the problem.
I'm wondering if the scancodes in my config are ok for a devinput-device, because the latest "official" lircd.conf.devinput looks like that:
# generated by devinput.sh
begin remote
name devinput
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_0 11
KEY_102ND 86
KEY_1 2
KEY_2 3
KEY_3 4
KEY_4 5
KEY_5 6
KEY_6 7
KEY_7 8
KEY_8 9
KEY_9 10
KEY_A 30
KEY_AB 0x196
KEY_ADDRESSBOOK 0x1ad
KEY_AGAIN 129
So I'm wondering about the different lengths of the keycodes (e.g. 0x0d vs 0x1ad -> 2 vs 3 digits).
Can anyone help me out with this issue ?
Am I missing something ?
How do I have to format the scancodes/keycodes the correct way for version 0.9.1 ?Hi,
I'm using arch (kernel 3.16.0-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux), a TechnoTrend USB IR Receiver and my custom remote (not covered by existing configs). I installed lirc and lirc-utils via testing repo (lirc-0.9.1). My problem is that I can access my device, but irw gives me no output at all.
At first some outputs:
ir-keytable:
Found /sys/class/rc/rc0/ (/dev/input/event17) with:
Driver ttusbir, table rc-tt-1500
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: RC-5
Name: TechnoTrend USB IR Receiver
bus: 3, vendor/product: 0b48:2003, version: 0x0101
Repeat delay = 500 ms, repeat period = 125 ms
output of "ir-keytable -t" for numbers 1-6 on my remote:
Testing events. Please, press CTRL-C to abort.
1408117586.815011: event type EV_MSC(0x04): scancode = 0x01
1408117586.815011: event type EV_SYN(0x00).
1408117586.934967: event type EV_MSC(0x04): scancode = 0x01
1408117586.934967: event type EV_SYN(0x00).
1408117587.702986: event type EV_MSC(0x04): scancode = 0x02
1408117587.702986: event type EV_SYN(0x00).
1408117588.366958: event type EV_MSC(0x04): scancode = 0x03
1408117588.366958: event type EV_SYN(0x00).
1408117588.486983: event type EV_MSC(0x04): scancode = 0x03
1408117588.486983: event type EV_SYN(0x00).
1408117589.094926: event type EV_MSC(0x04): scancode = 0x04
1408117589.094926: event type EV_SYN(0x00).
1408117589.214920: event type EV_MSC(0x04): scancode = 0x04
1408117589.214920: event type EV_SYN(0x00).
1408117590.926837: event type EV_MSC(0x04): scancode = 0x05
1408117590.926837: event type EV_SYN(0x00).
1408117591.046834: event type EV_MSC(0x04): scancode = 0x05
1408117591.046834: event type EV_SYN(0x00).
1408117592.446769: event type EV_MSC(0x04): scancode = 0x06
1408117592.446769: event type EV_SYN(0x00).
1408117592.566769: event type EV_MSC(0x04): scancode = 0x06
1408117592.566769: event type EV_SYN(0x00).
My remote config file looks like this:
# Please make this file available to others
# by sending it to <[email protected]>
# this config file was automatically generated
# using lirc-0.9.0(devinput) on Thu Aug 7 15:10:35 2014
# contributed by
# brand: Test
# model no. of remote control:
# devices being controlled by this remote:
begin remote
name BlackFlatOne
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_POWER 0x0c
KEY_MUTE 0x0a
KEY_SELECT 0x38
KEY_Z 0x0f
KEY_1 0x01
KEY_2 0x02
KEY_3 0x03
KEY_4 0x04
KEY_5 0x05
KEY_6 0x06
KEY_7 0x07
KEY_8 0x08
KEY_9 0x09
KEY_0 0x00
KEY_TV 0x1e
KEY_LEFT 0x11
KEY_RIGHT 0x10
KEY_UP 0x20
KEY_DOWN 0x21
KEY_ENTER 0x0d
KEY_CHANNELUP 0x12
KEY_CHANNELDOWN 0x13
KEY_VOLUMEUP 0x2b
KEY_VOLUMEDOWN 0x2c
KEY_STOP 0x0b
KEY_RECORD 0x1f
KEY_CAMERA 0x0e
KEY_ESC 0x29
end codes
end remote
I start lirc manually with
lircd --driver=devinput --device=/dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir BlackFlatOne -n
After starting lirc, I start irw, but I get no response at all when pressing buttons on my remote.
I already tried a
cat /dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir
(lirc and irw not running, of course) and this gives me cryptic symbols when pressing buttons on my remote, so the IR receiver doesn't seem to be the problem.
I'm wondering if the scancodes in my config are ok for a devinput-device, because the latest "official" lircd.conf.devinput looks like that:
# generated by devinput.sh
begin remote
name devinput
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
KEY_0 11
KEY_102ND 86
KEY_1 2
KEY_2 3
KEY_3 4
KEY_4 5
KEY_5 6
KEY_6 7
KEY_7 8
KEY_8 9
KEY_9 10
KEY_A 30
KEY_AB 0x196
KEY_ADDRESSBOOK 0x1ad
KEY_AGAIN 129
So I'm wondering about the different lengths of the keycodes (e.g. 0x0d vs 0x1ad -> 2 vs 3 digits).
Can anyone help me out with this issue ?
Am I missing something ?
How do I have to format the scancodes/keycodes the correct way for version 0.9.1 ? -
Ccm.config issue - cluster
<pre>Hi there,
XI 3.1 , Linux
We have a very strange situation.
We built a cluster for two servers bo1 and bo2 - they had SIA nodes called SIA1 and SIA2 respectively
A week or two ago, the BO repository became corrupted and we had to re-initalise it
This meant re-building the cluster. This necessitated the creatiion of a new SIA node for bo2 called SIAII (not my idea!!)
We did this using cmsdbsetup
This appeared to work and we appeared to have a working cluster
We noticed yesterday that a scheduled webi doc created on bo1 that was to run every 15 minutes was intermittently failing - about 3 out of 10 instances failed.
When we dug deeper, we were able to establish that the webi doc failed when the request was passed to bo2 - indeed it appeared to bring down the wireportserver.exe (both of them)
We re-checked the cluster via cmsdbsetup and everything looked fine.
Then we checked the ccm.config for bo1 and bo2 and things look a little strange. I believe a colleague may edited ccm.config incorrectly - there were 2 sets of entries in ccm.config for bo2 - one for SIA2 and another for SIAII. Perhaps the wrong one was removed/edited
Below is the comparsion of the 2 ccm.config files (bo2 on the left; bo1 on the right)
Neither have anything ins CLUSTER_NAMESERVER="" - is this correct
MYSQLHOSTNAME is incorrect on both
CMSCLUSTER="no" ?
On bo2 the node name is SIANODENAME="SIA2"
We looked at the registry entries and we can see entries for the old SIA...
Real question here is whether the ccm.config is accessed when one member of the cluster passed a report request to the other cluster member - would this be our issue?
SERVICENAME_AUDIT="BOE120_AUDIT" SERVICENAME_AUDIT="BOE120_AUDIT"
NAMESERVER="bo2" | NAMESERVER="bo1"
DBTYPE="MySQL" DBTYPE="MySQL"
INSTALLTYPE="new" INSTALLTYPE="new"
REINIT="yes" REINIT="yes"
BOBJEVERSION="12.0" BOBJEVERSION="12.0"
SHUTDOWNPORT="8005" SHUTDOWNPORT="8005"
REGFILE="/home/BOXI/bobje/data/.bobj" REGFILE="/home/BOXI/bobje/data/.bobj"
DBTYPE_AUDIT="MySQL" DBTYPE_AUDIT="MySQL"
CLUSTER_NAMESERVER="" CLUSTER_NAMESERVER=""
CONNECTORPORT="8080" CONNECTORPORT="8080"
SIAPORTNUMBER="6410" SIAPORTNUMBER="6410"
BOBJELANG="en" BOBJELANG="en"
BOBJELICENSEKEY="XXXX-xxxxxx-xxxxxxxxx-xxxx" BOBJELICENSEKEY="XXXX-xxxxxx-xxxxxxxxx-xxxx"
MYSQLHOSTNAME="127.0.0.1" MYSQLHOSTNAME="127.0.0.1"
PRODUCTID_NAME="BusinessObjects" PRODUCTID_NAME="BusinessObjects"
PRODUCTID_VER="12.1" PRODUCTID_VER="12.1"
LOCALNAMESERVER="bo2" | LOCALNAMESERVER="bo1"
PIDDIR="/home/BOXI/bobje/serverpids" PIDDIR="/home/BOXI/bobje/serverpids"
CMSCLUSTER="no" CMSCLUSTER="no"
REDIRECTPORT="8443" REDIRECTPORT="8443"
SIANODENAME="SIA2" | SIANODENAME="SIA"
DEFAULT_NAMESERVER="bo2" | DEFAULT_NAMESERVER="bo1"
INSTALL_DIR="/home/BOXI/bobje/" INSTALL_DIR="/home/BOXI/bobje/"
BOBJEUSERNAME="toronto1" BOBJEUSERNAME="toronto1"
CMSNAMESERVER="bo2" | CMSNAMESERVER="bo1"
DATABASEUID="toronto1" DATABASEUID="toronto1"
INSTALLMYSQL="yes" INSTALLMYSQL="yes"
BOBJEDIR="/home/BOXI/bobje/" BOBJEDIR="/home/BOXI/bobje/"
BOBJEINSTALLLOCAL="system" BOBJEINSTALLLOCAL="system"
SERVICENAME="BOE120" SERVICENAME="BOE120"
CMSPORTNUMBER="6400" CMSPORTNUMBER="6400"
CLUSTERPORTNUMBER="6400" CLUSTERPORTNUMBER="6400"
SERVICEPORT="3306" SERVICEPORT="3306"
SERVICEPORT_AUDIT="3306" SERVICEPORT_AUDIT="3306"
MYSQLHOSTNAME_AUDIT="127.0.0.1" MYSQLHOSTNAME_AUDIT="127.0.0.1"
SIAIILAUNCH='"/home/BOXI/bobje/enterprise120/generic/bobjrest | SIALAUNCH='"/home/BOXI/bobje/enterprise120/generic/bobjrestar
</pre>
Edited by: jemstar on Jun 25, 2009 12:42 PM<pre>The logs are attached below - might be a registry related issue??
ceserver.cpp:968:virtual bool CDZServer::onInitialize(): TraceLog message 1
2009/06/25 10:40:42.468|>>|E| |16511|1137466256| |||||||||||||||**ERROR:ceserver:invalid entry General\Directories\Config in registry [ceserver.cpp;968]
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 2
2009/06/25 10:41:40.613|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 3
2009/06/25 10:41:40.613|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 4
2009/06/25 10:41:40.850|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 5
2009/06/25 10:41:40.850|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 6
2009/06/25 10:47:06.844|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 7
2009/06/25 10:47:06.844|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 8
2009/06/25 10:47:39.350|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 9
2009/06/25 10:47:39.350|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 10
2009/06/25 10:48:30.154|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 11
2009/06/25 10:48:30.154|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 12
2009/06/25 10:51:39.548|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 13
2009/06/25 10:51:39.548|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 14
2009/06/25 10:54:22.550|>>|E| |16511|1198218128| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 15
2009/06/25 10:54:22.550|>>|E| |16511|1198218128| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 16
2009/06/25 10:55:55.728|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 17
2009/06/25 10:55:55.728|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 18
2009/06/25 10:56:44.085|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 19
2009/06/25 10:56:44.085|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 20
2009/06/25 10:59:11.076|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 21
2009/06/25 10:59:11.076|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 22
2009/06/25 11:01:11.492|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 23
2009/06/25 11:01:11.492|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 24
2009/06/25 11:06:19.005|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 25
2009/06/25 11:06:19.005|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 26
2009/06/25 11:11:12.031|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 27
2009/06/25 11:11:12.031|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
kc3xmlGenericParser.cpp:389:bool Cube::XmlTools::ValueTypedConstant::Validate(const Cube::XmlTools::ic3TokenTranslator*): TraceLog message 28
2009/06/25 11:14:01.242|>>|E| |16511|1170385808| |||||||||||||||**ERROR:C3_GenericParser:ValueTypedConstant::Validate - Client - Invalid value : B95ED5004B624ADF927180432D8E2018 [kc3xmlGenericParser.cpp;389]
kc3cdbdataprovider.cpp:3641:virtual BOResult cdbDataProvider::SetQuerySpec(const ibo_ptr<iboUnknown>&): TraceLog message 29
2009/06/25 11:14:01.250|>>|E| |16511|1170385808| |||||||||||||||**ERROR:C3_Dataprovider:QuerySpec Validate failed ! [kc3cdbdataprovider.cpp;3641]
kdgDocument.cpp:10587:void dgDocument::Check(bool, const char*, bool) const: TraceLog message 30
2009/06/25 11:14:01.250|>>|E| |16511|1170385808| |||||||||||||||**ERROR:dgDocument:An internal error occured while dgDocument is calling pDataProvider->SetQuerySpec(pQuerySpec) [kdgDocument.cpp;10587]
kdgDocumentEx.cpp:1589:virtual BOResult dgDocument::SetQueryMDP(const bo_wstring&, const ibo_ptr<iboUnknown>&, std::ostream&, std::ostream*): TraceLog message 31
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocumentEx:SetQueryMDP: 0.009
kdgDocument.cpp:4342:BOResult dgDocument::SetQueryMDP(const dgCommandParser::DPCOMMAND&, std::ostream&): TraceLog message 32
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:SetQueryMDP: 0.009
kdgDocument.cpp:4020:void dgDocument::UpdateQueryMDP(const dgCommandParser::DPCOMMAND&, std::ostream&): TraceLog message 33
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:UpdateQueryMDP: 0.009
kdgDocument.cpp:1649:virtual BOResult dgDocument::ProcessDPCommands(std::istream&, bool, std::ostream&): TraceLog message 34
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:ProcessDPCommands: 0.01
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 35
2009/06/25 11:32:27.546|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 36
2009/06/25 11:32:27.547|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
</pre> -
JMS Adapter Config issues with Plan.xml
Hi All,
I'm learning how to configure JMS Resources in WLS to use within a JMS adapter in my application. My approach so far has been :
1. Configure Outbound Connection in JMS Adapter : eis/wls/Queue. I used the weblogic.jms.XAConnectionFactory as the Connection Factory.
2. Create Queue within SOAJMSModule : jms/MyQueue and target - soa managed server.
Updated the JMSAdapter.rar deployment and restarted the SOA server as well as the JMS module.
3. Create JMS Adapter within JDeveloper to use jms/MyQueue as the destination and eis/wls/Queue as the JNDI source.
On deployment and running, I see this following error. Apologies it is a bit difficult to trawl through. I did have a look in the Plan.xml and it definitely has an entry for this Adapter and the jndi-name. Any other approach?
Oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PostException' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ExceptionManagement:JMSPostException [ PostException_ptt::PostException(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/wls/Queue'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/wls/Queue. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(Unknown Source) at com.sun.el.MethodExpressionImpl.invoke(Unknown Source) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:765) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:305) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:276) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(Unknown Source) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source) at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207) at weblogic.work.ExecuteThread.run(ExecuteThread.java:176) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PostException' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ExceptionManagement:JMSPostException [ PostException_ptt::PostException(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/wls/Queue'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/wls/Queue. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:992) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 81 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PostException' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ExceptionManagement:JMSPostException [ PostException_ptt::PostException(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/wls/Queue'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/wls/Queue. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1012) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:803) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 84 more
The deployment plan reads as follows :
<deployment-plan xmlns="http://xmlns.oracle.com/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/deployment-plan http://xmlns.oracle.com/weblogic/deployment-plan/1.0/deployment-plan.xsd" global-variables="false">
<application-name>connectors</application-name>
<variable-definition>
<variable>
<name>ConnectionInstance_eis/wls/Queue_JNDIName_13401799388390</name>
<value>eis/wls/Queue</value>
</variable>
<variable>
<name>ConfigProperty_ConnectionFactoryLocation_Value_13401801874110</name>
<value>weblogic.jms.XAConnectionFactory</value>
</variable>
</variable-definition>
<module-override>
<module-name>JmsAdapter.rar</module-name>
<module-type>rar</module-type>
<module-descriptor external="false">
<root-element>weblogic-connector</root-element>
<uri>META-INF/weblogic-ra.xml</uri>
<variable-assignment>
<name>ConnectionInstance_eis/wls/Queue_JNDIName_13401799388390</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="oracle.tip.adapter.jms.IJmsConnectionFactory"]/connection-instance/[jndi-name="eis/wls/Queue"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_ConnectionFactoryLocation_Value_13401801874110</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="oracle.tip.adapter.jms.IJmsConnectionFactory"]/connection-instance/[jndi-name="eis/wls/Queue"]/connection-properties/properties/property/[name="ConnectionFactoryLocation"]/value</xpath>
</variable-assignment>
</module-descriptor>
<module-descriptor external="false">
<root-element>connector</root-element>
<uri>META-INF/ra.xml</uri>
</module-descriptor>
<module-descriptor external="true">
<root-element>wldf-resource</root-element>
<uri>META-INF/weblogic-diagnostics.xml</uri>
</module-descriptor>
</module-override>
<config-root>E:\oracle\product\middleware\11.1.1\soa_11.1\soa\connectors\plan</config-root>
</deployment-plan>
Thanks
JB
Edited by: 939260 on Jun 20, 2012 5:13 AMHi JB,
Please follow the below steps from beginning...
1. Create the JMS Server in the Admin Console, the target server for the same should be the soa server
2. create new JMS Module.
3. Create new Connection factory in resources, give your JNDI names, the target servers should be the admin and the soa.
4. create new queue, give the JNDI names, the target server should be the JMS Server which you have created in the step 1 above.
5. Now go to deployments, slect the JMS adapter, click update, and say redeploy with the location of JMS-plan.xml given below...
6. Now inside the composite while configuring the JMS adapter, select the queue which you have created above.
If you have followed the abpve steps correctly, you should not face any problem.
Hope this helps,
N -
OIF+OAM: install/config issues
This post is long. Hoping that at least one of the issues is seen by someone or someone has insights before we open SR(s) with Oracle.
We have a working OAM/OVD 11.1.1.5 installation (done according to the EDG at http://docs.oracle.com/cd/E21764_01/core.1111/e12035/toc.htm).
We started an evaluation of OIF and ran into some issues grouped under Install and Config categories.
h2. Install issues:
We installed it per chapter 16 of that EDG and and all the steps went OK except step 16.7 (http://docs.oracle.com/cd/E21764_01/core.1111/e12035/oif.htm#BAJCJHBG).The config properties userldaphaenabled, fedldaphaenabled are getting set via WLST but don't appear to be persisted anywhere. On a restart they are false again. Are they supposed to be saved to config.xml of the IDMDomain? Can I try adding them manually like this as child elements under each of the wls_oif managed servers?
<datastore>
<userldaphaenabled>true</userldaphaenabled>
<fedldaphaenabled>true</fedldaphaenabled>
</datastore>
If those settings were properly set what is it supposed to do? I can see that config.xml, cots.xml files are stored as blobs in one of the OIF db tables. Will the above setting move them from DB to LDAP?
h2. Config/Runtime Issues:
We proceeded with configuration because the /sp/metadata and /idp/metadata test URLs are working fine via the VIP address. we used this manual to do the integration.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15740/oif.htm#CACJDDGE. In section 4.3.1.6 (Configure Oracle Identity Federation in SP Mode) of this document it says to configure Oracle SSO. We only have OAM and not osso. We went ahead and configured the second tab (OAM) in the screen capture in that section as well (is there any documentation on how to configure that tab?)
In SP mode (section 4.3) , testing of a resource protected with OIFScheme in OAM is not successful. It does not show any OIF login screen. Instead it takes the user to through these URLs:
1. https://sso.company.com/test-app/
2. https://sso.company.com/fed/user/sposso
3. https://sso.company.com/fed/user/authnoam?refid=id-tB20kXzmHjpn6MUSdOr7qbmd2OU-
4. https://sso.company.com/fed/sp/art20?SAMLart=AAQAAbV1ElKBtte9uuhKoeo4h%2FMufCdY2wDlDIM2T9dL%2BvhsvtfUrwCuZg8%3D&RelayState=id-JPh8MY05pAZRckl4yOc2J4-80GI-
and then shows this error in the browser:
Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
The following errors are seen in the WLS_OIF1 (we turned off WLS_OIF2 during this test) managed server logs:
<Mar 10, 2012 10:58:37 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.oam.OAMAuthnEventHandler> <FED-18068> <Authentication failed: WebGate did not authenticate the user>
<Mar 10, 2012 10:58:37 AM PST> <Emergency> <oracle.security.fed.model.config.Configuration> <FED-10174> <Property was not found: httpheaderattrcollector.>
<Mar 10, 2012 10:59:27 AM PST> <Warning> <oracle.security.fed.http.handlers.authn.LoginRequestHandler> <FED-18051> <Authentication instant was not sent from the authentication engine.>
<Mar 10, 2012 10:59:37 AM PST> <Error> <oracle.security.fed.util.ssl.KeystoreUtil> <FED-18080> <Could not retrieve key from the key store. Please verify that the key password is equal to the key store
< this error is followed by an exception shown below>
<Mar 10, 2012 10:59:39 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.osso.OssoFinishSPSSOEventHandler> <FED-15134> <The service providercould not map the identity provider response to a user>
FED-18080 exception:
java.security.UnrecoverableKeyException: Cannot recover key
at sun.security.provider.KeyProtector.recover(KeyProtector.java:311)
at sun.security.provider.JavaKeyStore.engineGetKey(JavaKeyStore.java:121)
at sun.security.provider.JavaKeyStore$JKS.engineGetKey(JavaKeyStore.java:38)
at java.security.KeyStore.getKey(KeyStore.java:763)
at com.sun.net.ssl.internal.ssl.SunX509KeyManagerImpl.<init>(SunX509KeyManagerImpl.java:113)
at com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl$SunX509.engineInit(KeyManagerFactoryImpl.java:48)
at javax.net.ssl.KeyManagerFactory.init(KeyManagerFactory.java:239)
at oracle.security.fed.util.ssl.KeystoreUtil.createKeyManagers(Unknown Source)
at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSSLContext(Unknown Source)
at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.getSSLContext(Unknown Source)
at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(MultiThreadedHttpConnectionManager.java:1361)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
at oracle.security.fed.util.soap.SimpleSoapSender.sendMessage(Unknown Source)
at oracle.security.fed.http.flow.profiles.sp.SendSoapRequestSSOResponseHandler.perform(Unknown Source)
at oracle.security.fed.controller.ApplicationController.processServletRequest(Unknown Source)
at oracle.security.fed.controller.web.servlet.FederationServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
A minor other problem seems to be with adcri:
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "Cannot run program "/app/iam/middleware/wlserver_10.3/server/adr/adrci": java.io.IOException: error=12, Cannot allocate memory"
Action: Ensure that command line tool "adrci" can be executed from the command line.
We can run the adcri tool from command line using the same LD_LIBRARY_PATH as used by the wls_oif1 server. Why is it trying to run it and failing and what is it trying to do? Can we turn it off?I reinstalled the suite. This time, during the Policy Manager install I left the "Root Directory for Policy Domains" (step/page 7-12) at the default, which was "/". The GUI now works correctly.
On the previous install I changed the path to /AccessManagerPolicy -- it wasn't clear to me what the installer meant by 'root directory'. I did try to get /AccessManagerPolicy to work by creating a directory under my web root to match, but I still had issues with the Policy Domain -- the no policy domains would match. So, it looks like this parameter should never be changed in the installer.
Aaron. -
Ok I dont know if its just staring at me ridiculing me but I am feeling like an idiot here... I have an 871 and all I need to do is some basic rules..
Here is the config I am having the issue with...
I need these statics:
.227 opened and forwarded to these ports:
10.0.0.240 80 tcp
10.0.0.241 81 tcp
10.0.0.242 82 tcp
10.0.0.243 83 tcp
10.0.0.244 84 tcp
10.0.0.9 3389 tcp
then .228 forwarded and allports opened to 10.0.0.15
Right now its working for the .228 but the .227 is blocking everything.. If I remove the lines for the 10.0.0.15 *.*.*.228 then everything works for the .227 statics and ports..
What is wrong here???
s run
Building configuration...
Current configuration : 4747 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service sequence-numbers
hostname ******
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
no aaa new-model
resource policy
clock timezone MST -7
ip cef
ip name-server *.*.*.65
ip name-server *.*.*.65
ip inspect log drop-pkt
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
crypto pki trustpoint TP-self-signed-974215006
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-974215006
revocation-check none
rsakeypair TP-self-signed-974215006
crypto pki certificate chain TP-self-signed-974215006
certificate self-signed 01
30820242 308201AB A0030201 02020101 300D0609 2A864886 F70D0101 04050030
30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 39373432 31353030 36301E17 0D313330 31303231 35333430
315A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3937 34323135
30303630 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
CE70D924 A69C5408 AF2DC7DF CD6C4FB4 6FF8B3A7 04380A8B AC07B63F DF47B76C
9269256B 2D166D76 DFEEB4A1 A7F3CD14 87018C5E 00957EE5 233F76EE 8D0EB13E
D33FE972 77661DF2 B2BBC711 E09CF82F 7FC907DF 5591C326 CF80D599 09017B23
AB6F3589 A983AC80 2C92D62D E15FF75B 14241C9B 394BED17 69F2BE7F 69BB21EF
02030100 01A36C30 6A300F06 03551D13 0101FF04 05300301 01FF3017 0603551D
11041030 0E820C52 69766965 72615F6D 65736130 1F060355 1D230418 30168014
8F9D3891 FB866320 C9C2FA5B 7AEE8A53 91F495DD 301D0603 551D0E04 1604148F
9D3891FB 866320C9 C2FA5B7A EE8A5391 F495DD30 0D06092A 864886F7 0D010104
05000381 81005F45 DD5BBAE3 960E8930 1C88ACEC 4D190FEC C8C6FA71 48FB8CB8
969BD344 1FC0E8C6 98C4ED1D B559A772 1A3ED3D9 1C75D143 BE642414 B049118C
858422D5 E84617E9 018B1B66 341E928D EAE0E568 923424C4 BF31DFFF E7E5A490
B24D2DBC CE5DC6FF 306EC1C2 BD4DDC04 4AE70B0B 5CFE9426 21B5F83E CA6D28E0
3B93DCA9 015E
quit
username****** privilege 15 secret 5 34yweth2453723475
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $FW_OUTSIDE$
ip address *.*.*.226 255.255.255.248
ip access-group 101 in
ip verify unicast reverse-path
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly
duplex auto
speed auto
interface Vlan1
description $FW_INSIDE$
ip address 10.0.0.1 255.255.255.0
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 *.*.*.225
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat pool outside_ip_pool *.*.*.227 *.*.*.230 netmask 255.255.255.24 8
ip nat inside source list 1 interface FastEthernet4 overload
ip nat inside source static tcp 10.0.0.240 80 *.*.*.227 80 extendable
ip nat inside source static tcp 10.0.0.241 81 *.*.*.227 81 extendable
ip nat inside source static tcp 10.0.0.242 82 *.*.*.227 82 extendable
ip nat inside source static tcp 10.0.0.243 83 *.*.*.227 83 extendable
ip nat inside source static tcp 10.0.0.244 84 *.*.*.227 84 extendable
ip nat inside source static tcp 10.0.0.9 3389 *.*.*.227 3389 extendable
ip nat inside source static 10.0.0.15 *.*.*.228
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.0.0.0 0.0.0.255
access-list 100 remark auto generated by SDM firewall configuration##NO_ACES_4##
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip *.*.*.224 0.0.0.7 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 permit ip any host *.*.*.228
control-plane
line con 0
no modem enable
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
webvpn context Default_context
ssl authenticate verify all
no inservice
endHi,
I'm not really familiar with the Router Firewalls but I'd just point out what caught my eye (even though there might not be anything wrong about them)
You have ACL 101 attached to outside interface and it only allow traffic to .228
You have some outside_ip_pool configuration line that includes the IPs you're going to use for both Static NAT and Port Forward. Shouldnt you leave the .227 and .228 out of the Pool range?
- Jouni -
Hi guys,
I am having some trouble with this config. All i am looking to do is a simple reverse proxy to this one host. When the page comes up it prompts me to download a bin file.... Probe succeeds and it says its working. I would also like to redirect to /spend What am i missing?
PA-ACE-4700-SLB/Spend-Support# show run
Generating configuration....
crypto chaingroup SPEND-CHAINGROUP
cert AddTrustExternalCARoot.crt
cert COMODOHigh-AssuranceSecureServerCA.crt
access-list allow line 8 extended permit ip any any
probe tcp HTTPS_PROBE
port 443
interval 5
passdetect interval 5
receive 3
connection term forced
open 2
probe tcp TCP8005_PROBE
port 8005
interval 5
passdetect interval 5
receive 3
connection term forced
open 2
rserver host Spend
ip address 10.0.10.22
inservice
serverfarm host SPEND
probe HTTPS_PROBE
rserver Spend 443
inservice
ssl-proxy service SPEND-SSLPROXY
key ProdKEYPAIR.PEM
cert WWW-PROD-CERT.crt
chaingroup SPEND-CHAINGROUP
class-map type http loadbalance match-any L5
2 match http url /.*
class-map match-all SPEND-CLASS
2 match virtual-address 10.0.1.110 tcp eq https
policy-map type loadbalance first-match HTTPS
class L5
serverfarm SPEND
policy-map multi-match SPEND-SLB
class SPEND-CLASS
loadbalance vip inservice
loadbalance policy HTTPS
loadbalance vip icmp-reply active
nat dynamic 1 vlan 1000
ssl-proxy server SPEND-SSLPROXY
interface vlan 1000
ip address 10.0.1.109 255.255.255.0
access-group input allow
nat-pool 1 10.0.1.110 10.0.1.110 netmask 255.255.255.255 pat
service-policy input SPEND-SLB
no shutdown
ip route 0.0.0.0 0.0.0.0 10.0.1.8
Thanks!
-AndyHey Andy what´s up?
Ok, Could you explain a little bit what seems to be the issue which you got or what you want to accomplish here?
You said, you are typing: https://10.0.1.110 and it should show the content of 10.0.10.22 but it is not or you are typing
https://10.0.1.110/spend and you expect the ACE magicly know what to do?
Could you specify a little bit?
If you are trying to do the following:
https://10.0.1.110/spend
then you may try something like:
class-map type http loadbalance match-any spend
2 match http url /spend
policy-map type loadbalance first-match HTTPS
class spend
serverfarm SPEND
class L5
serverfarm serverfarm-for-others
Please specify what you are looking for.
Jorge -
Apache2 config issue with CFMX8 on Ubuntu
hi there -
I have a new Ubuntu laptop I purchased from Zareason, (great
deal, nice people). They were cool to install CFMX8 developer
version on my laptop before shipping.
My issue is this:
The cfadmin works fine, so I know CF is at least up and
running, and connected to the web server thru port 8500.
so,
http://localhost:8500/CFIDE/administrator/
works just dandy.
http://localhost/test.cfm
(with some simple code) outputs to the browser the literal code
The problem I have is that when I put a simple test .cfm page
in my documentroot for apache (mine is /var/www), the CF code
outputs straight to the browser. I know that SOME scripts execute
from this directory, since I can run PHP scripts.
Most of my config options for Apache2 seem to be in the
/etc/apache2/apache2.conf and /etc/apache2/sites-available/default.
I cant for the life of me figure out how to get a simple
script to run from this dir. I've looked at permissions,
configurations, etc and have come up empty.
any ideas folks? Thanks in advance.
hoganWell found the issue. Adapter config needs to have a parent config tag. It was missing in my case.
<?xml version="1.0" ?>
*<config>*
<adapter type="scs" default="true" name="myadapter">
<config>
<property name="port">4444</property>
<property name="host">161.222.84.128</property>
<property name="type">socket</property>
</config>
<beans template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml"/>
</adapter>
*</config>* -
with acs 4.2 installed in my network, PEAP, EAP-TLS, md5... authentications work normally. But Mac-Based-Authentication doesnt work at all. i tested every thing but no luck .
This is what i have setup on Swith for MAB:
aaa new-model
aaa authentication login default none
aaa authentication dot1x default group radius
radius-server host 192.168.2.16 auth-port 1645 acct-port 1646 key cisco
dot1x system-auth-control
interface FastEthernet0/1
switchport mode access
dot1x pae authenticator
dot1x port-control auto
dot1x mac-auth-bypass
On ACS server, i created Netword-Profile for MAB, i added those Agentless hosts mac-adds, Even i created User-Name&password by those Agentless hosts mac-adds on acs, ..... still nothing seems to be working. i have selected ACS_Internal-Database for mac authentication.
On ACS while i check the Failed-attempt log, nothing is logged there. i dont know where is the issue.
Please tell me where im wrong on my config?Under your interface type: mab
Sent from Cisco Technical Support iPad App -
No soa_server1 ???? Oracle SOA Suite 11g config issue on WIN 7 64 bit
Hello guys.
Happy new year. Here is the first Oracle SOA Suite 11g issue I met in this new decade:
While I tried to install Oracle SOA Suite 11g on my new win 7 home Premium, after all installation done, I found there was no "soa_server1" under new created domain(path C:\Oracle\Middleware\user_projects\domains\base_domain\servers) with just Admin server only - i have done similar install/config on win vista 32bit before everything was fine. I found following lines in the log(C:\Oracle\Middleware\logs\wlsconfig_20110102233019.log):
2011-01-02 23:31:52,986 INFO [Thread-14] com.oracle.cie.domain.script.ScriptExecutor - warn: set obj26 attribute Targets to "AdminServer"
2011-01-02 23:31:52,986 WARN [Thread-14] com.oracle.cie.domain.script.ScriptExecutor - warn: set obj26 attribute Targets to "AdminServer"
com.oracle.cie.domain.script.ScriptException: Unable to find attribute Targets
at com.oracle.cie.domain.script.ScriptExecutor.setAttrValue(ScriptExecutor.java:3589)
at com.oracle.cie.domain.script.ScriptExecutor.setValue(ScriptExecutor.java:1331)
at com.oracle.cie.domain.script.jython.ScriptInvocationHandler.set(ScriptInvocationHandler.java:210)
at com.oracle.cie.domain.script.jython.ScriptInvocationHandler.invoke(ScriptInvocationHandler.java:103)
at $Proxy12.setTargets(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.cie.domain.script.jython.WLScriptContext.set(WLScriptContext.java:1298)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx61.set$5(<iostream>:45)
at org.python.pycode._pyx61.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at wls_webservice_fixup_utils$py.verifyWseeWorkManager$11(C:\Oracle\Middleware\user_projects\domains\domain2\wls_webservice_fixup_utils.py:359)
at wls_webservice_fixup_utils$py.call_function(C:\Oracle\Middleware\user_projects\domains\domain2\wls_webservice_fixup_utils.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at wls_webservice_fixup_utils$py.doWseeFixup$1(C:\Oracle\Middleware\user_projects\domains\domain2\wls_webservice_fixup_utils.py:18)
at wls_webservice_fixup_utils$py.call_function(C:\Oracle\Middleware\user_projects\domains\domain2\wls_webservice_fixup_utils.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx64.f$0(<iostream>:11)
at org.python.pycode._pyx64.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1571)
at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
at com.oracle.cie.domain.DomainGenerator.generate(DomainGenerator.java:269)
at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
2011-01-02 23:31:52,986 INFO [Thread-14] com.oracle.cie.domain.script.ScriptExecutor - set obj26 attribute Target to "AdminServer"
2011-01-02 23:31:53,002 INFO [Thread-14] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj26 attribute Target to "AdminServer"
2011-01-02 23:31:53,002 WARN [Thread-14] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Name on type:class com.oracle.cie.domain.xml.configxb.weblogic.x90.impl.WeblogicJmsTypeImpl
2011-01-02 23:31:53,345 WARN [Thread-14] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:CredentialEncrypted on type:class com.oracle.cie.domain.xml.configxb.impl.DefaultAuthenticatorTypeImpl
2011-01-02 23:31:53,345 WARN [Thread-14] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:CredentialEncrypted on type:class com.oracle.cie.domain.xml.configxb.impl.DefaultIdentityAsserterTypeImpl
Dose anyone have some suggestions for solving this? Thanks first.............
CliffCan you cross check your steps again against the steps mentioned here -
http://anuj-dwivedi.blogspot.com/2010/10/installing-oracle-soa-and-bpm-111130.html
Regards,
Anuj -
I currently have a CSM that is load balancing two web servers. Everything working great. I have two new web servers that are being used for a different system so I basically copied the old config, changed the names of the vservers, serverfarms and policies and expected the same result as the first.
What is happening is that when I ping the VIP, it gets redirected to one of the reals but then the real responds back instead of the VIP.
Not sure why that is happening.Sean,
When you said "Typically, the rservers would use the same gateway you have configured on the client VLAN. The important thing to make sure of, is that you must make sure that the ONLY for these rservers to reach their gateway is through the CSM that is bridging the servers' VLAN to that client VLAN."
Now I assume you meant to say "Typically, the rservers would use the same gateway you have configured on the client VLAN. The important thing to make sure of, is that you must make sure that the ONLY way for these rservers to reach their gateway is through the CSM that is bridging the servers' VLAN to that client VLAN.
Well, I have a working bridging configuration for a different system and I have found that the real servers in my server vlan do have the client vlan IP address... But the server vlan is in fact a layer 2 vlan, it does not have it's own gateway so it has no other way out other than through the CSM and to the client vlan gateway, just as you said.
What I have found is that the server vlan for my new set up actually has its own gateway. Because of other servers in this vlan I cannot do away with it. So, I looked at an ealier post where you stated" If the adding source-NAT resolves the issue, then you know that asymmetric routing was your problem. One solution would be to leave the source-NAT config in permanently. The other would be to set the default gateway of your new servers to the CSM interface, and another would be to use policy-based routing."
The two solutions I am interested in is the client nat and the setting of the default gateway of the new servers to the CSM interface. Exaclty what interface are you referring? Are you referring to the IP address that bridges the client and server vlan together?
Regarding your client nat example, you mentioned that the client nat address is owned by the CSM, but in your example config I did not see that IP address at all so I am a little confused as to how the csm owns this IP.
I really appreciate your responses!
Maybe you are looking for
-
Newbie question - been trying to create more audio instrument tracks, but everything I do to try to separate them from the original (Instrument 4) track changes that original track as well. Both the manual and Sitter's book say to just hold the new t
-
I have upgraded to Mavericks and have found the Calendar 7.0 not visually user friendly. The week view is too resrictive and the month view far too messy. Is there any way of editting the view, the ability to change the colour and thickness of the gr
-
How to change the color of radius for point features
Hi forum When using the addPointFeature() in MapViewer, you can specify a double[] radius a parameter to get a circle drawn around the point. Problem is, this circle is always red, I can't find any way to change the color to black or other color. Is
-
Issue with 0SM_BPM_Q0001
Hello, in my customers system the BPM Querey got somehow destroyed, rs_tempmate_maintain with template 0SM_BPM_WT0001 does not offer variables for solution, business process steps etc any more. Is the a way to restore the query to its original state?
-
Need Nokia 3710 Software Update. See Bugs N proble...
Hi. Nokia. I Buy Nokia 3710 Last week. There is few Bugs in This phone Like 1.) Waiting Call tone Not available. 2.) Draft Message not Saved. 3.) battery Life is too Short. 4.) When I set ringtone on level 5 but Not play on level 5 its start from 1