WVC54GCA ftp setup issues

Hi, I have the camera working fine but for the use of FTP with motion detection. Whenever I try to save the information it says that it cannot save the ftp information. I think it is down to how I have written my path for the ftp location but can find no examples as to how to list it and it also only allows a very small path so typing in the full path does not work either.
Any help here wold be great please.
Nick

Within about a hour out of the box, I had everything working (including email alerts and internet remote access).
My only problem is getting the FTP upload to work. No point in leaving the images on a local computer for the thief to steel.
Linksys support tells me that they only support INTERNAL FTP sites, not uploading off my local network to an external FTP site. They claim a fix is in the works.
I don't see how how the camera knows the difference?
My FTP site is: ftp://upload.xxxxxxxx.net/images/HomeMonitor/. I can connect to this site with my browser and upload images manually.
My camera settings for FTP are:
FTP Server: upload.xxxxxxxx.net
Port: 21
Login Name: MyLoginName
Password: MyPassword
Passive Mode: Disable (don't even know what this is)
File Path Name: /images/HomeMonitor
Does anyone have any suggestions?

Similar Messages

Setup issue in oracle projects - classifications link(standard link) is missing in oracle projects page

Hi Team,
I have a setup issue in oracle projects
I am unable to find the classifications link in oracle projects page.
Navigation : Go to any projects responsibility-->search for the projects-->click on project -->click on setup Tab : At the bottom of the page, we can see some standard links along with UDA's.
Here one standard link Classifications is missing.
Can anybody guide me what setup we need to do get the link.
Thank you.

Hi,
The classifications link is not appearing in your Project's Setup page because, Classifications must have been unchecked in the Project template from which your project has been created. You can find the Project template information by clicking on the Additional Information link in the same Project -setup page. Once you check the classification flag in the concerned Project Template, all future Project creations made out of this template would have the link enabled.
But for the current project, classification link cannot be enabled.
Rgds,
Shan

Correct FTP setup

I've been struggling with ftp setup on my os x server. I have it running but not how i want it. I want anyone to be able to download from the ftp server but not upload to it and i dont want people to require a username or password to access the ftp site. I cant see any settings options on the ftp tab of the server app. Is there some command line or am i missing something obvious???

Can you offer downloads of the files via http? That might be easier.

Odd speed dial setup issue

I am getting an odd speed dial setup issue. Here are the steps:
1. Open speed dial setup screen
2. Tap an open slot
3. Search for a contact using the keyboard
4. Click on the contact to select it
If I do it that way, I am taken back to the speed dial setup screen, but the contact is NOT added to the slot.
On the other hand, if in step #3, I just scroll down the list of contacts and select a contact, it works just fine. Seems to be an issue with the search function. Anyone else have this problem?
Android v2.2
System Version.2.3.15.MB810.Verizon.en.US

The steps that you are taking correct for setting up the speed dial. I have provided a link for additional information.
Click here http://motorola-global-portal.custhelp.com/app/answers/detail/a_id/48578/kw/speed+dial/p/30,6720,7500,/session/L3NpZC9zNEEzbVFhaw=

HT1595 i can't see my apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

i can't see apple tv on my screen? i'm not sure if this is an apple tv issue or a tv setup issue? (although it appears nothing has changed on my tv setup since the last time i used it?)

As far as the flashing question mark and globe icons are concerned, your computer had lost track of its startup volume and was searching through the possibilities. The globe icon indicates that it is looking for a network to start from and the question mark indicates that it is looking for an OS X volume. To fix this, if you haven't already, go to System Preferences > Startup Disk and reselect your internal HD as the startup volume.
From what you have described, this issue does seem to have corrected itself, and the faster start up is what one would normally expect. I think that you have absolutely no reason to reinstall your system.

AWE Transaction Configuration Event Notification Setup issue

AWE Transaction Configuration > Event > Notification Setup issue
On Final Denial Event has Notifications Option set to "Requester" "Both".
The Email URL is redirecting to the correct Approval Component mentioned under Approval Component in On Final Denial Event
But the Worklist URL is redirecting to another Component unlike the email URL, it is sending to a different component.
Why the same notifications via the same Event (On Final Denial) have two different URL's??

Hi,
The worklist/notification component is defined on several places, where the "lowest" definition applies for the action being triggered.
1 AWE Transaction Configuration> Transaction Registry > Default Approval Component
2 AWE Transaction Configuration > Event
3 AWE Transaction Configuration > Event > Notification > Template Detail tab
Be aware that the Notification section in the Transaction Configuration shows 1 row in the grid, where more than 1 row can be defined. Click on the View all to expand the grid and see all notification defined for this event.
See if above configurations differ in menu, component, page ...
Regards,
Hakan

ICloud OS X email setup issue

Hi need some help with an iCloud email setup issue that doesn’t seem to have been covered by other posts or the Apple help factsheets.
Used my old mac.com Apple ID to set up an iCloud account which now shows as having my iMac as a linked device. To use iCloud Mail was prompted to create a new email address which I could do by turning on Mail in iCloud settings.
I signed into iCloud via my iMac and having deselected default options to use iCloud for Contacts etc arrived at the account page which has the various options on the RHS and my mac.com ID info on the left.
Ticked the Mail option on the RHS was asked to “choose an iCloud email address” underneath the box where you enter the chosen email address was a note saying “you cannot change your email address after creating it”. When I tried to set up the new iCloud email address got a prompt saying “you cannot change your email address after creating it”.
Help!

You need to know Comcast's settings for incoming and outgoing server when setting up your OSX Mail app. The info should be somewhere on Comcast's help web page.
lenn

My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control.

My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control key.

Scratch the post above - the musics that plays in the playlist also plays in the library and that is because i forgot that i imported from the cd yesterday. Basically, I see the rest of my music, but it doesnt' play and tells me it can't locate the file though the location in 'perferences' points to the correct location. Getting iTunes to play after a new computer or rebuild is a headache.

How do I use a specific host directory in the ftp setup?

I am reestablishing links in CS4 to my websites after an upgrade from Vista to 7.
I use Go Daddy and the subdirectory capability. I had a difficult time setting up the ftp connection and saw in another posting that the Host directory should be left blank. This indeed worked. The problem is that I want to control access of different designers to different websites that are contained in one hosting account. When I use the correct Host directory in the Site Definition dialogue box as I did with my setup on Vista, I get the error message:
"An FTP error occurred - cannot open remote folder [FileName]/. Access denied. The file may not exist, or there could be a permission problem."
However, the file does exist. I have tried various uses of forward slashes, in front, in back, and both, without success. I'm sure there is an answer.
Any ideas?
Thanks,
Mark

Can you verify that your user account has access to those other accounts? Is this a reseller account where you have accounts under your own or is this a dedicated box or VPS where the accounts can be in different directories? Is this a Windows or Linux box
There's a few things that could be going on, but if it ends up being a permission issue Godaddy will be the only ones who can help with that. But just an example of a path on a Unix/Linux environment, "public_html/". There is no leading slash but there is a trailing slash in the path. If you are connecting to a Windows server it could be slightly different, but my only experience with Windows is in a networked/VPN environment so if that is your case I am sure someone else here can help you out.

WVC54GCA FTP Problem

I get an error when I try to set up FTP on my WVC54GCA. I am running an FTP server on a local machine and can FTP into that machine from a browser on a different computer on my network. Here is the setup:
FTP Server: [name of my machine] - I have also used the IP address of this machine. And, I've tried with and without ftp:// - nothing seems to work
Port: 21
Login Name: The login name I've setup on the FTP server
Password: The password I've setup on the FTP server
Passive Mode: I've tried with both enabled and disabled
File Path Name: I've tried c:\, \, \Webcam_Images\, Webcam_Images, blank and nothing seems to work.
Any help would be appreciated.

Just two general questions -
Can you get it to send images to your e-mail account ?
Are both ftp server and e-mail server on different segments from the camera ?
1. Try using the name of the FTP server instead of the IP...
2. I also think that you can only upload 5 seconds at a time...
3. Try to change the fps, pre and post motion trigger so they were under 5 seconds (4) and see if it works...

FTP Setup on Mac Mini Server

Hello:
First off, I am new to Mac OSX Server and servers in general. I am trying to set up FTP so I friends/family can upload to my server. Here is where I am at...
My server is connected to my Airport. My Airport is the DHCP server, distributing a range of IPs to the devices. I do not have a static IP, but am using dyndns to workaround this. Note that even though FTP services are not working, Web services are.
Created a user on the server
Updated the ACL so the user had permissions to the Share
Enabled FTP service on server
Configured Airport for port forwarding to send to server based on IP
The issue i am having is that when i use a client (filezilla) i get a permission denied error on the share. I can mount the share locally to my mac and edit with no issue. Just not thru FTP.

Thank you for the reply!
I did not have the permissions set up there. I made it so the user i created had group access. Then i still had no luck. The firewall is set up and i have port forwarding to the server on my router set up. Then i found my issue...
On the FTP service, when i set up the share permissions, i forgot select protocol options and go to the FTP tab to enable the service. Once i did that, i was golden.
Thank you for your help again!

New, Single Server - DNS, Web, Wiki, Mail Setup Issues

I'm having some issues properly setting up 10.7.3 to host internal DNS and external Web, Wiki and Mail. I'm having issues with the web and wiki hosting. Since those are the most important right now, I haven't really had a chance to fully test the other features. I was able to do some testing of the mail and iCal but it was limited.
Long read below but I thought the specifics would be helpful...
My goals and configuration are:
***GOALS***
Primary:
1) Host a public website: example.org and www.example.org
2) Host a public wiki: main.example.org and www.main.example.org
3) Host a public mail server: [email protected]
4) Host a public, group calendar
4a) Read only to majority - Read/Write to a group
5) Host a global address book for authenticated users
Secondary:
6) Allow anonymous public access to a file share (read only)
7) Allow authenticated access to the same file share (read/write)
8) Do as much of this via GUIs as possible.
***SETUP AND CONFIGURATION***
Physical:
1) Business class Internet (no blocked ports)
2) A single, public and static IP address
3) Domain name and public DNS via GoDaddy
4) Wildcard Cert: *.example.org from GoDaddy
5) Late 2011 (bought in Jan 2012) MacMini Lion Server (the $1,000 one).
5a) Upgraded the RAM to 16GB (need for VMware Windows clients)
5b) Added two USB to Ethernet adapters.
6) Using a new model AirPort Extreme Base Station (bought w/ the MM) as the main router.
Initial Configuration:
7) Setup a Mac Address reservation for the main and two USB Ethernet ports along with the wireless too.
7a) Main port = 10.0.1.5 / Others are .6, .7 and .10
8) During the setup, I chose the Host on the Internet (third) option and named my server: main.example.org
9) After the setup completed, I upgraded the OS & Admin Tool to 10.7.3 from a clean install (on #5 now)
DNS Config
10) I used the admin tool to open DNS and change:
11) "Primary Zone Name" from main.example.org to example.org.
12) In the "Nameservers:" block, I changed the zone name there but left the nameserver name alone (zone: example.org /// Nameserver Hostname: main.example.org).
13) The Machine Name and Reverse Zone was left alone. RZ resolves to main.example.org. sudo changeip -checkhostname is good. dig on the example.org and main.example.org are good to go (NOERROR).
OD Config
14) From the server app, I clicked Manage/Network Accounts and setup the OD - No issues.
SSL
15) From the server app, I created self signed cert, generated a CSR, got a public Cert, then replaced the self-signed with the public one - No issues.
16) Changed any service using the self-signed cert to the public one - No issues.
17) Changed the cert in the OD to the public cert from server admin - No issues.
In order: File Sharing, Mail, AB, iCal, Web, Wiki, Profile Manager, Network Groups, Network Users
18) File Sharing was setup using the server app
19) Setup mail using the server app to start it and the server admin app to configure it - No issues there (I think...)
20) AB - Flipped the switch to on
21) iCal - Flipped the switch to on - I setup the e-mail address to use after I added the network accounts.
22) Web - Flipped the switch to on - Default site worked (main.example.org)
23) Wiki - Flipped the switch to on - Default wiki worked. (main.example.org)
24) PM - Checked the sign config profiles and enabled the device mgt. I then flipped the switch to on - Default settings and pages worked.
***MY PROBLEMS***
Website:
Adding a website for example.org gave me the red dot in the server app. To fix that, I added a Machine Name record to my primary zone (PZ = example.org Machine Name = example.org). I first tried using the same 10.0.1.5 IP as the main.example.org and left the reverse mapping alone (still resolved to the NS of main.example.org).
That gave me the green light in the server app when trying to add the website again. From there, I changed the "Store Site Files In" to the location of my website files (and confirmed "Everyone" has Read Access in the folder's security settings). I left the other info alone (all defaults accepted) and clicked done.
Access to the website works on the server but external access doesn't (Network Error/timed out tcp_error). Checked the AirPort settings using the AirPort utility (version 5.5.3) and the Port Mapping (under the "Advanced" icon) show serveral services all pointing to 10.0.1.5. Thinking it could be DNS I tried main.example.org externally and it failed the same way.
I ran the changeip command (good to go) and dig on example.org and main.example.org and they both resolved to 10.0.1.5 correctly.
I removed the example.org Machine Record from the zone and it now looks like:
PZ=example.org / ZONE=example.org / NS=main.example.org
Machine Record=main.example.org / IP=10.0.1.5
RM=10.0.1.5 / Resolves=main.example.org
PLEASE HELP!

The amount of users (if relevant):
On site - 1 (Me)
Off site - 16 (Windows clients - some have iOS devices too)
Web site traffic - less than 50 regular visits per day (avg of 15) with a peek of ~125 once a month.
This is for a 501c3 public nonprofit made of all unpaid volunteers (including the officers and directors). All of us have paying day jobs and I just so happen to be the guy that knows just enough to get myself in trouble here.

Shared Review comment server setup issues

I've been having some issues setting up a comment server/repository for Shared Reviews in Acrobat 8 (for our all-Mac network). I've done extensive research on how to set up a Network Folder and a WebDAV folder (since those are the only two supported methods in Acrobat 8).
- For the Network Folder setup, I created a folder on one of the machines on our network and shared it using SMB. When specifying that location (using smb://IPAddress/Folder/), Acrobat either 1) brings up a login screen, into which I enter the proper credentials, and after pressing OK, it says the connection could not be made, or 2) it verifies the shared folder location, but when I make comments and then choose Publish Comments, a red box appears saying something to the effect of "cannot access IPAddress, will keep trying."
- I also tried using WebDAV. Solutions I found online mostly consisted of using the Terminal to access system files and entering numerous lines of code. I pretty much had to learn about WebDAV from scratch today in order to get the Shared Reviews process set up, but I feel like there is something I'm missing regording its implementation.
I suppose this post can be boiled down to three questions:
1) What is the best way to set up a Shared Review system, and how can it be done in the simplest manner possible?
2) What am I missing from my knowledge of Network Folders and WebDAV folders in this regard?
3) Would functionality be benefited by simply upgrading to Acrobat X?
Thank you all in advance for your responses and help. If there is any more information required in order to provide a solution, please let me know.

The roundcube db schema needs to setup manually. See /usr/share/webapps/roundcube/INSTALL
Also, from your /etc/webapps/postfixadmin/config.inc.php:
$CONF['domain_path'] = 'NO';
$CONF['domain_in_mailbox'] = 'YES';
$CONF['maildir_name_hook'] = 'NO';
..which results in /var/mail/vmail/[email protected]
From your dovecot.conf
mail_home = /var/mail/vmail/%d/%u
...which results in /var/mail/vmail/domain.com/user
That doesn't fit together.

Auditing file server setup issues - nfs permissions

I have half-dozen Solaris 10 workstations requiring Solaris Auditing enabled and audit files saved. I used a spare Solaris 10 system with 2-72GB disks and formatted 2nd disk for entired 72GB. I shared out the 72GB partition on this system and modified /etc/security/audit_control on a test Solaris 10 W/S to use the shared-out partition on Audit file server as primary audit directory. Following directions in Solaris 10 Admin Gde I chmod -R 750 the mount pt using the 72GB partition before sharing out the partition. However, all client W/S's that I enable Auditing would not use the 72GB partition on file server until I went back and chmod 777 the partition and rebooting file server. Also, on any client that I have enabled Auditng to use nfs-mounted 72GB partion on file server I cannot as a non-root user issue a "df -k" command without getting error:
df: cannot statvfs /var/audit/fmaud.1/files: Permission denied
Is this normal or did I miss a chmod step or two in setting up Audit clients and/or Audit file server?

The roundcube db schema needs to setup manually. See /usr/share/webapps/roundcube/INSTALL
Also, from your /etc/webapps/postfixadmin/config.inc.php:
$CONF['domain_path'] = 'NO';
$CONF['domain_in_mailbox'] = 'YES';
$CONF['maildir_name_hook'] = 'NO';
..which results in /var/mail/vmail/[email protected]
From your dovecot.conf
mail_home = /var/mail/vmail/%d/%u
...which results in /var/mail/vmail/domain.com/user
That doesn't fit together.

Directory Server setup issues.

I recently installed the new OS X Server on my new iMac. I have two iPhones, two iPod touches, the iMac and an Air that I want to serve. I registered macserved.com and have a static IP. As far as I can tell, the domain and DNS is set up correctly (to serve internal DNS). I had a wordpress blog running for a while and can access it both internally and externally. MySQL was a pain in the butt to configure, but I figured it out. When I started the config for Profile and OD however, I get this error:
An error occurred while configuring iMac as a directory server. Please check your network configuration and try again.
So I first checked my hostname:
Primary address     = 192.168.0.6
Current HostName    = macserved.com
DNS HostName        = macserved.com
The names match. There is nothing to change.
dirserv:success = "success"
A little dig output:
; <<>> DiG 9.8.3-P1 <<>> macserved.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27076
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;macserved.com.                              IN          A
;; ANSWER SECTION:
macserved.com.                    10800          IN          A          192.168.0.6
;; AUTHORITY SECTION:
macserved.com.                    10800          IN          NS          macserved.com.
;; Query time: 2 msec
;; SERVER: 192.168.0.6#53(192.168.0.6)
;; WHEN: Fri Dec 7 19:24:36 2012
;; MSG SIZE rcvd: 61
I'm not certain it is a DNS issue, but I'm fairly new to DNS setup so I cannot rule it out.
Where should I start looking? What should I be looking for in the logs? I'm cool with scraping everything and starting over as well. Right now I have zero invested in it (no files that need saved, etc) but I would PREFER not to reformat/reinstall OS X though.

I figured it out! My certificates were hosed. I rm -rf the Authority in Library/ and recreated the certs after DNS was setup properly. Works great now aside from a few other website issues, but that is another thread :-)

WVC54GCA ftp setup issues

Similar Messages

Maybe you are looking for