WVC54GCA - Motion detection

Hi.
WVC54GCA
Firmware Version: v1.1.00 build 02
I've a problem with motion detection of subject camera.
The camera keeps on sending every 15 minutes (interval selected by me) an e-mail with the picture, independently whether a motion was detected or not. I tested all possible option but no success. It keeps on going.
Neither this forum, nor Google could help so far.,
Any ideas ... ?
Thanks,

Using Firefox ... when I click on "Set sensitivity area", I get an empty dark purple box. No buttons or video window in.
Using IE 10 ... I get the correct window with the sliders on the left and the video window, but the "Indicator" bar is always full (completely blue). Is that normal?
Could it be that the camera's webif requires a particular browser, version or addon (Firefox)?
Is all this working for for somebody?
Before I know this, I will not waste my time with factory resets and so on. Other people had the same ... but I AFAIK nobody ended up finding a solution.
e.g.:
http://community.linksys.com/t5/Cameras/Motion-detection-sensitivity-white-balance-on-WVC54GCA/td-p/...
Thanks,

Similar Messages

Broken WVC54GCA Motion Detection

Does anyone know how to get the motion detection in the WVC54GCA to work correctly, without triggering contstantly
I have setup my camera to detect motion, and it appears to trigger (false positive) endlessly. Using R24 (also tried R22) when I turn the threshold to max/min or midway, or have fullscreen, 1,2 or 3 detection windows I will receive an emailed output at the frequency defined by the gap between triggers. It doesnt matter whether I ask for JPG output or Video (all files types) I fill my inbox very quickly, to the point where I have to turn off the motion detection, rendering the reason for purchase pointless. Like an idiot, I do have two of these cameras, so its also unlikely to be simply a faulty unit.
(I also have a WVC54GC earlier camera, which does trigger properly, but the ASF files generated are flakey to say the least)
The only thing I haven't tried is sending via FTP, but frankly I can't see how that will impact motion detection.
1. Does anyone know how to get around this? or have had success with automated motion detection capture and send ?
2. Are there any Linksys Cisco employees reading this that can confirm the firmware is still bing written and when the fixed version will be released, or should I eBay these to some hapless unfortunat, and buy Axis instead?
I realise my words are somewhat provocatory, but at least they are not fictional, unlike the marketting behind this camera, and I aslo believe I have the right to buy a functional product.
Thanks for reading
Richard

When you Enable Motion Detection on your Camera to capture JPEG files to be mailed on your E-mail, whats is the Interval Time you have set on your Camera. You may increase the Interval Time. Have you tried to Downloading the Latest Software from the Linksys website. You try downloading the latest software from the linksys website and try installing on your computer. Once you reinstall the software on your computer after this you can enable the Motion Detection on the software and check how it works.

WVC54GCA motion detection in utility setup not working

After reading this answer that basically says that if you use the web-based advanced setup for motion detection, your recording is limited to only 5 sec., I disabled motion detection in the web GUI, and decided to setup motion detection in the utiity setup windows.
I can't make it work correctly: I have firmware V1.00R24:
This is what I do: I check Enable Motion Detection Recording in the Network Camera screen. In Preferences, I set the Recording Path, set 10 secs Motion Detection record before and after motion detection. I have 15 GB of available disk space.
Under Recording Schedule, if I set a schedule, say, daily from 7am to 7:30am (or any other interval), it will record for the whole duration independently of any movement or lack of movement in the field. If I don't set a recording schedule, it won't record anything.
I am not interested in triggering emails or FTPs, which apparently can be done only with the Web GUI anyway. I just want to record 10 secs before and after every instance of detected movement.
Am I missing something?
Thanks for any suggestion.

Well, I am still struggling with this motion detection.
@Carrot: Linksys seems to say that the 5 second limitation is only for the web-based setup, which I didn't use. If you read this answer from their knowledge base, you will see they recommend using the utility to obtain longer recording times. In any case, when I follow their recommendation, I don't even get 5 seconds. The only thing that gets recorded are the intervals I specify in Recording Schedule, and then it records everything, motion or no motion. Without entering a recording schedule, nothing gets recorded.
In any case, if you have any specific third party software in mind that would do a better job with motion detection, please let me know. I have been using successfully YawCam, which works with USB webcams, but I haven't found a way to make it work with this IP camera.
I may endup using my own video software (using avisynth) to detect movement from full recordings.

WVC54GCA motion detection and port 25 blocked

About a month ago, I stopped receiving motion detection emails believe its because ISP is now blocking port 25...can successfully send and receive test emails but do not receive any messages with motion detection...can anyone suggest a solution to this problem, thanks much

I just encountered that problem and this link helped me with it..

Motion detection WVC54GCA setting custom area.

Now onto the next issue with the WVC54GCA.
When setting up the E-mail and configuring the motion detection with a minimum time between motions at 5 minutes I still get more then 100 mails a day.
IMO setting the custom area is not functioning. It just keeps detecting everything in the full window.
Does anybody know a solution or is it just this bad?
If so is there any new firmware coming out, or do we get a change to fiddle with it ourselves, by opening up telnet or any other way?
(Just wished I know the root password )
From the 100 mails are atleast 75 false. If I could bring that back to 20 or less it would be acceptable for me, but this is too much.
Maurice

great_white wrote:
You can check for the firmware on www.linksys.com/downloads.Try to reflash the firmware on the camera,reset the camera and reconfigure it from the scratch.
Sorry I should have said I have the newest firmware although you could have guessed, because I was asking for an update.
Maurice

Motion Detection on Linksys WVC54GCA

Sorry if this is in the wrong section.
I would appreciate if someone could help me with this.
I am trying to configure this camera to record onto my network drive via FTP on a schedule - for example 9 - 5 each day.
Can recording be done based on these entered times or does motion have to be detected?
I have copied a screenshot of my settings at below url:
http://img23.imageshack.us/img23/15/settingsr.jpg
I have tried with passive mode enabled and disable and tried recording with a shorter internal between start and end times.
FTP credentials are correct, along with IP. I can access both locally and via the internet.
Thanks for your help.

The motion detection should be enable and the motion will be detected with-in the specified period of time.

WVC54GCA - over sensitive motion detection, has anyone solved it yet?

My cams spam my mail account whenever I have motion detection enabled, the images it sends aren't anything to do with motion. This seems to be a common issue with these.
Has anyone got it working correctly?

Try upgrading/reflashing the firmware of your Camera. Follow this link .
After a firmware upgrade, you must reset the Camera to factory defaults, then setup the Camera again from scratch.
To reset the Camera press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Now re-configure your Camera...

WVC54GCA- Enable Motion Detection checkbox, unchecked after 3 hours.

Motion Detection E-Mail, fails after 3 hours.
I checked the Enable Motion Detection box. Filled in for E-Mail. Sending to a g-mail.
Sending from a smtp mail(att.net)Using smtp port number 587,and filled in outgoing mail server(smtp.att.yahoo.com).Filled in my account name and password. On new motion trigger schedule I filled in Every day 00:00-23:59(Wanted this to be active 24/7).Test E-Mail works on all 3 cameras. Also getting motion E-mails sent to my G-mail as mp4 files, I can watch. This is really cool. However, after 2-3 hours the Enable Motion Detection box is unchecked on all 3 cameras, and there is of course no more e-mails being sent. When I recheck the Enable Motion Detection box, all previously entered info is still stored. I hit apply and I’m up and running again.3 hours later the cameras have disabled the Enable Motion Detection again.
All 3 cameras are still working. I can see the video. It’s only the Motion Detection E-Mail part that disables itself after 3 hours.
I am using a Linksys WRT330N.No other wired or wireless network problems on home- network(with 4 desktops,3 laptops, wired and wireless printers,wii,ps3 and x-box 360)
Anybody know what I’m doing wrong?

Thank you for your greeting from Canada.(What a great Country!).
I have tried with timers(connected to cameras),turning them on and off(2/3 times in a 24 hour period).
I realy like the cameras,but software is terrible.(or is it the camera?).
E-mail notification falls out(disapears/is unchecked)once a day.
Even the Linksys Camera Utility cannot remember/recognize cameras between PC-shutdowns.
Hope Linksys can do something about this.
Cannot buy more of these,when they are so unreliable.
The point with a web-cam with motion detection,e-mail posibility would for me, be that it works every time.
Unfortunatly,this product does not..
Unless,somebody has found the solution.. .. .. ......... .. ?

Live! Cam Voice Shuts Down When Using Motion Detection Feature

I'm running XP Media Center 2002.
I just installed Live! Cam Voice. Started using it and is was fine out of the box. I updated the drivers and i also decided to update the drivers for my SoundBlaster Audigy 2 ZS.
The problem only seemed to occur when using the Motion Detection. Shortly after using it, I'd get a Microsoft error prompting the WebCam Center to shut down.
First I uninstalled the software and reinstalled it using the original drivers on the supplied disk. I still had the problem. So i rolled back the drivers on my sound card. That seems to have fixed the problem... Thought you'd want to know.
To be clear the Cam driver I'm using is .0.8.206. I believe this is the one that came w/ the install disk. Hope this helps anyone else who's experienced similar problems.....

I have the same problem. I only get 6-7 fps max. I've never seen anything above 0 fps which is a disgrace. My computer is and Athlon64 X2 4800 with 2GB RAM so it's nothing to do with spec. This behaviour was the same in driver version .0.8 as well as the latest one... .0.02 or something.
Also, since the last driver update, the whitebalance and focus when on automatic is dreadful. I'm not impressed.

Start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period

is there an app for iphone which can be set to start recording video at a set time of day and off at a set time of day, and or can start rec video when motion detected, till no motion detected for a set period. basically someone is vandalising my vehicle and i really really want to catch the mongrel
thanks for any suggestions

Nope.

PVC2300 - Alternative to Motion Detection Event / FTP Upload

Hi Cisco Community,
My apologies if I am not posting this in the correct section / allowed to post here.
I've got a PVC2300 mounted inside a pelco enclosure that is positioned 6 meters high. Sometimes the motion detection event doesn't work to well (this is due to the fact that its in an enclosure and pointed out towards the ocean at a beach location).
Also the motion detection event is pretty much useless at night without surrounding illumination.
In Australia we also have severe lack of broadband speed and also download allowance, therefore it is not practical to broadcast streaming video (we would get charged excessive fees for exceeding download quotas and only one person could view the camera at any one time).
I've written a custom windows service that reads the PVC2300's MJPEG stream over http at a specified interval and saves a single .JPG file in which the windows service uploads the .JPG file to a specified website. This means that you will always get an updated image from the camera every 5 minutes, rather than based on motion detection. It would have been nice if cisco / linksys implemented this within the camera's firmware (maybe in a future version?).
Anyway, communities share things with each other, so i've made the software freely available to anyone who wishes to use it. I would appreciate any feedback from Cisco / Linksys.
http://www.airbiscuit.com.au/pvc2300-service.html - PVC2300 Windows Service
http://www.airbiscuit.com.au/camera.aspx - The actual PVC2300 in operation
Regards,
David Zielinski

You came to the right place and thats a very cool post IMO.
First, thanks for using Cisco Small Business products and you can look forward enhancements and options in our line, of course. I think I noticed your other post mentioning you are in Australia? We have a few really top BU folks (TMEs and Biz Dev) down under and they are very active in the BU solutions area for Small Business. Do you know Leah Davis and Dave Harper (they are Participants on this community as well)?
In any event, I think compressed streaming is a very valid design idea and we are actually looking at similar partners in the US experimenting with the same. In one Partners case he has a lightweight application (java) that runs on your mobile and allows all the mobile streams to come compressed from a server farm.
Typical use case is a Day Care where 15 parents want to watch the same camera, and the compression benefit becomes crucial in scale. But your case is a financial one (therefore good too) where you would have to pay for streaming video.
While we dont offer this today (the external managed service that is), I am sure you have played with the camera GUI and realize you can try some of the following to reduce bandwidth
1- lower quality of video (resolution, FPS, illuminate Audio, etc)
2- reduce motion detection size (seconds)
3- Purchase a local NSS2100 or NSS3x00 to store High Quality video on the LAN and only alert for motion via email (not realy friendly for remote monitoring I admit).
For sensitivity in an enclosure, have you played with Sensitivity settings thresholds in the Camera GUI under motion detection?
For night illumination without an external IR Illuminator, have you tried the 'night schedule', which activates (or deactivates) the IR Cut Filter?
For the periodic updates, I'll let Davin Oishi comment as he is about ready to announce the PVC300 and I know it offers a browser based periodic refresh and I am not sure how far he has extended that to an API for external access.....
Thanks for your post
Steve DiStefano
Systems Engineer in the US field channel
RTP, N.C.

Help with motion detection preset on a WVC210

Hi, I am really out of ideas. Is it possible to set the home position as my motion detection area? I can't seem to be able to make my camesa stay at its home position. I set my camera to go back to my home position after 1 minute of idling, the the camera keep going somewhere else. I noticed that the area it goes to is the same area that my camera goes to when I clicked on the motion icon (the one with the man running. Can I overwrite that position? I tried deleting all my presets, recalibrated the camera and even resetting my camera a few times already. I really need help cause the area that the camera choose as my motion area is not what I need. Thank you in avanced to all that take the time to answer me.

Hi, yes I can manually tilt up or down. I have the camera facing down on the stairs to the entrance of my house and saved as a home position. I went in to the motion detection section and made sure the position is the same as my home position (I hit apply just to be sure). I set my camera to go back to my motion detection area when idle for 5 minutes (I tried different values already). Within 5 minutes the camera would tilt back to the center (facing the street), but it seems that the panning position was saved. I can move the camera around. When I hit the home position the camsera would go back to where I want, but when I hit the motion button the camera would be in the same panning position, but with a different tilt position center). The reason I know its the center is because I tried resetting my default home position and it would go back to the center pan/tilt position. It seems the camera would not accept any tilt position other then the center... I can give you access to my camera if you would like. I greatly appreciate your time and effort in helping me.

* JMF PlugIn Effect/Codec Filter for Motion Detection : Source Example *

I have noticed some posts on here recently about reading a webcam�s pixel stream and as at least one example the processing of that data for robotics, or another for motion detection or tracking.
This can mean a requirement for fast frame processing, setting the datasource framerate, and to implement as easily as possible; eg a simple JMF effect or codec plugin to set on the processor.
I have a link as follows to some source and examples for such plugin effects, and some of you may find this interesting if not also useful.
See an updated http://www.exactfutures.com/index02.htm for the new download. Enjoy.

thanx Andy

WVC210 Motion detection.

Hello again.
I can't switch off the motion detection using the push-button on web page (see pic). It's works fine (I receive the intrusion file by e-mail) but when I click on pulse, the motion detection don't stop the service.
Please, help me!!
Tks.

Hi Paolo,
I have a WVC210 and took a peek at this when I saw your post.
I am actually running motion detection from the FREE SWVMS16 on a separate PC and also streaming FTP motion detection from the camera to an NSS, because as you probably observed, the email file attachments are alot and cost money (since they are so big) if they come to your mobile :-(
So just wanted to mention that that to me is the prefered way to manage up to 16 cameras and can be used remotely as well (just beware of the WAN bandwidth requirements).
But that button with the pulsing man on it. That button really only is used"to have the camera moved to the previously defined Motion Detection area" per the on line help.
As you probably learned, to enable and disable motion detection, you have to switch focus to a different screen.
But the SWVMS16 has this button as you require. Where you can see the cameras and can enable/disable, while watching them all.
perhaps you should try this (again, its free). You download it from the same place you find camera Firmware.
let me know what you think?
Steve D

Motion Detection on WVC80N - not working

I've got the WVC80N camera setup on wired ethernet and everything is working fine with the exception of Motion Detection alerts. I've updated the firmware to the latest Ver.1.0.01
I can get test emails from the camera without any issues so I know that my SMTP server is working. I'm also logging all the traffic being sent from the camera so I can see the SMTP server being accessed when I send test emails and the camera tells me it was successful sending the email. However beyond that, I cannot get the camera to send me a email with video or email.
Here is what I have configured:
Enabled Motion Detection = checked
Attachment Type = JPEG (I've also tried video, neither work)
Frame rate = 1 (I've tried multiple settings, none have worked)
Pre-Caputre Length=0 (I've tried multiple settings, none have worked)
Post-Capture Length=2 (I've tried multiple settings, none have worked)
Action(s): E-Mail = checked
Sent to: My email address
Show From As = My email address
Subject = Motion Detection
SMTP Port = 25
SMTP Mail Server = checked with my SMTP server defined
New Motion Trigger Schedule = Currently nothing defined. I've also tested using Everyday 01:00 - 24:00. Neither has worked.
Any ideas? I'm lost
Thanks

I'm having the same problem. Tried Cisco live chat but no solutions worked.
Used SMTP port numbers suggested by the mail server and others (25, 465, 587, 80, 110) - nothing. Tried two different providers, Gmail and SBC Global, using their suggested settings - nothing
Tried the camera firmware upgrade - didn't help.
I have run out of ideas. To say the least, this is getting very annoying.

WVC54GCA - Motion detection

Similar Messages

Maybe you are looking for