WVC54GCA: Video No Longer Displays on Windows 7

I cannot get the video from my WVC54GCA web cam to display on my Windows 7 box; neither the Web page nor the camera utility will display the video. This began when I ran Windows Update a couple months back. Recently I rebuilt my entire system, but I'm still having the same problem. Any suggestions?

When you rebuilt your entire computer system did you also uninstall/reinstall the camera's software, then reset and reconfigure the unit? You may also connect a computer directly to the camera and check if you can access it via Ethernet connection? You can also try using another computer to properly isolate this. I found some links that might help you get it up and running again:
Resetting Your Linksys Video Camera to Factory Default:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=652f536e555a4db8b282e8a2f2490e0d_5614.xml&pid=80&r...
Setting Up the Wireless-G Internet Monitoring Camera to be Accessed Remotely Over the Internet:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=38a241e0e57246b4a186b7275b6cc4a0_16337.xml&pid=80&...
Adjusting Video Settings on the Camera:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8922b9cb8db64468bc7e26555667cd4a_17422.xml&pid=80&...

Similar Messages

FireFox no longer displays embedded Youtube videos in WordPress blogs - Even the Youtube videos no longer display on the YouTube website!

Since yesterday FireFox no longer displays embedded Youtube videos in my WordPress blog - Even the Youtube videos no longer display on the YouTube.com website!

Go here please, and post your concern. We are trying to show how widespread this issue is:
Youtube videos not playing on standalone Safari browser iOS 8

Music videos no longer display video, though they play audio.

Since upgrading to the most recent versions of iTunes and Quicktime, music videos don't play video - the audio still works. The .m4v files open and play fine in QT, play fine on my iPod, even still play fine (video & audio) on my laptop.
Has anyone seen anything like this?
This is a Dual-Processor G5 1.8
Thanks for any pointers.

Now iOS 8 has not improved the video player, but now has so many buggs, seriously!
I Thought iOS 8 was going to be awesome!
Disappointed again!

You Tube videos no longer work after Flash Player upgrade

I am running Win XP 2002 with SP3 and Firefox 3.6.15. I just upgraded flash player and now the You Tube videos no longer display. The You Tube sound works. IE has not be affected and I can see the You Tube videos. Firefox does display videos from Netflix and news sites but not You Tube. Your company wants $39.00 to solve a problem that is the result of your efforts, not mine. I think that is wrong. So what do I do so I can resume using Firefox to view You Tube videos?

To eidnolb/anyone else who can help?
I am having a great deal of issues trying to sort out the flash player. Tried uninstalling/reinstalling the flash player, however I still get the same messages on sites such as youtube, bbc that I do not have the correct version installed and to install version 10.
I notice that you have mentioned to right click the flash symbol and then on to settings on the link page that you provided, unfortunately, all i can see is a plain box with a cross in the top left hand corner, and when i right click, there is no Settings option. i have run malware and other sytem scans and have removed any issues that there might have been, all still to no avail.
Any further help will be greatly appreciated.
Thanks

Firefox no longer displays Youtube videos. How do I fix this?

Firefox 8.0 on 64-bit Windows 7 no longer displays Youtube videos. I get a solid black rectangle where the video should be. How do I fix this?

Answers in this forum have shown different things have worked for different people.
For some disabling hardware acceleration for Flash helps. To do that right-click on a Flash video, select Settings, go to the first tab of the settings for the option to enable/disable hardware acceleration for Flash. This is something recommended by YouTube for those having problems - http://www.google.com/support/youtube/bin/answer.py?&answer=1209379
Clearing YouTube cookies and the cache has also helped some. For details of how to do that see https://support.mozilla.com/kb/Deleting+cookies and https://support.mozilla.com/kb/How+to+clear+the+cache
Others had to go a step further after deleting YouTube cookies and block YouTube from saving cookies. In the Tools menu select Options to open the Options window. Go to the Privacy panel and make sure it is set to "Use custom setting for history". Click the Exceptions button, type in http://www.youtube.com and click on Block
You can also try changing to the secure YouTube site, https://www.youtube.com

Safari 6.0 No Longer Displays Linksys Web Cam Video

I have been using a Linksys WVC54GCA for serveral years. I view the camera setup and video on my browser. With the new Safari 6.0 in Mountain Lion, I can no longer display video from my Linksys Cam. It works fine in Firefox and on my iPhone/iPad. Has anyone else seen a problem displaying video on Safari?

I have a similar problem with an EasyN IP camera. Worked perfectly under Lion / Safari 5. With Mountain Lion and Safari 6 I get about 2-3 seconds of video before the video stops. As mentioned in one of the replies above, it seems Safari is doing something weird with it handling of the cgi script for the video feed served up by the IP camera. I haven't found any error messages so tracking down the root cause is proving elusive.
There's another thread discussing this issue here: https://discussions.apple.com/message/19087481

HT3209 My purchased iTunes videos no longer play on either of my Windows 7 computers. When I try to play any of them, it shuts down iTunes. Any ideas? I do have the latest itunes software loaded. jgh

My purchased itunes videos no longer play on my Windows 7 computers. When I click on a movie, itunes shuts down with an error message. Movies played fine until now. Any ideas out there?
jgard96

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I have home videos on my ipad that are no longer on my windows 7 pc and i need them back on my computer so that I can email them out (can't share from that program on ipad), how do i get them back on my pc?

I have home videos on my ipad that are no longer on my windows 7 pc and i need them back on my computer so that I can email them out (can't share from that program on ipad), how do i get them back on my pc?

Hey JennaPickle,
If you want to get your personal vidoes off your iPad and onto your computer, follow the steps in this document:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Take care,
Delgadoh

Windows Explorer no longer displays the LAN computers

Hi
I use Windows 7 SP1 Ultimate 64 bit, I'm in
a local area network (peer to peer), I not do use the homegroup service and I have no
firewall/antivirus activated.
Now, I have a computer that has problems of
resource sharing:
1) When opening Windows Explorer from
this computer, the LAN computers are no longer
displayed. If I access these computers
via \\<Computer-Name>, I see
only their resources but I do not see
their shared folders. How come?
2) All the resources shared
on this machine are no longer accessible to
other computers. How come?
Thanks
Bye
Balubeto

Hi,
This behavior may also be caused by following factors:
•NetBIOS over TCP/IP is not turned on (enabled).
•The Computer Browser service is not started or is turned off.
•Then File and Print Sharing for Microsoft Networks is corrupted.
Please follow these steps to check these factors:
Step 1: Enable NetBIOS over TCP/IP
1.Click Start, click Control Panel, and then click Network and Internet Connections.
2.Right-click Local Area Connection, and then click Properties.
3.Click Internet Protocol version 4 (TCP/IPv4), and then click Properties.
5.Click the General tab, and then click Advanced.
6.Click the WINS tab.
7.Under NetBIOS setting, click Enable NetBIOS over TCP/IP, and then click OK two times.
8.Click Close to close the Local Area Connection Properties dialog box.
9.Close the Network Connections window.
Step 2: Start the Computer Browser service
1.Click Start, type services in Search box, and then click Services.
2.On the right side, right-click Computer Browser, and then click Restart.
3.Close the Service window.
Step 3: Install File and Print Sharing for Microsoft Networks
1.Click Start, click Run, type ncpa.cpl, and then click OK.
2.Right-click Local Area Connection, and then click Properties.
3.Highlight File and Print Sharing for Microsoft Networks, and then click uninstall.
4.Repeat above steps and check on File and Print Sharing for Microsoft Networks to install this item again.
If the issue still persists, please post back the error message when you try to access the shared folder or files.
Kate Li
TechNet Community Support
I tried all your suggestions but all
is remained unchanged and no error is displayed.
Now, what can I do to fix this problem?
Thanks
Bye
Balubeto

Windows explorer no longer displays devices after ios 8 update

I recently purchased an IPhone 6 and IPhone 6 plus and noticed that they do not show up in Windows Explorer when connected to a Windows Desktop.
I recently updated 2 iPhone 5s and 2 iPhone 5, and noticed that prior to performing the IOS8 update, the devices appear in Windows Explorer as a storage device and I was able to copy all the photos from each of the device onto the Windows Desktop. After updating all of them to IOS8, none of them or the IPhone 6 show up as a storage device. Can anyone tell me if this is intentional or if this has something to do with the fact that the CAMERA ROLL was removed? I did read in other forums/news indicating that there are efforts to put CAMERAL ROLL back. In light of this, does anyone know if this will allow the devices to display in Windows Explorer again?
I don't have a major problem since I copied all the contents from the Iphone5 phones for backup prior to updating to IOS8, but kind of annoying if I have tons of photos on the phone and don't want to waste my time deleting them on the phone. I find it faster when using Windows Explorer to delete unwanted photos or add photos I want.

I was having this problem too, even after updating to iOS 8.1
iPhone 6 plus was recognized by iTunes but not Windows Explorer.
Unplugged USB, unlocked phone (lock screen pin code or fingerprint) and reconnected to USB.
When prompted press Trust this computer and yippee the phone pops up in Windows.
The bit I had overlooked was unlocking the pin code on the phone.
This page helped
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Can I have an external video source run in a window instead of using the full display?

I'm aware that the 27" iMac models are capable of accepting external video sources, but I'm wondering if it's possible to have an external video source run in a window on the desktop, rather then use the full display. Does anyone know if there's any software I can download to allow this, or will I have to purchase a special capture device?

hat I DON'T WANT TO OPEN the window application FROM the Labview VI BUT IN the Labview VI. I think it's possible to do that and to do communicate the OpenGL application with the Labview Interface using an ActiveX but I don't know how. Can someone help me ?The desired behavior you desribed may not be possible with that application. In general LabVIEW does not offer a window object that other standalone applications can run it. The closest thing is the ActiveX container. If the programmers for your application created an activeX control of your program and they provided documentation, it should be pretty easy to incorperate the app and labview into one window. I recommend contacting the manufacuturer of the app to see if they have an activeX control version of the app.

How to see available space in a blank dvd when burning in finder? It no longer display at the bottom of the finder window.

How to see available space in a blank dvd when adding files in finder? It no longer displays at the bottom of the finder window.

Choose Show Status Bar from the View menu.
(113198)

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

Thanks but I found my problem. It was easy oncew I found out the flask player was also called shockwave. My shockwave add-on was disabled. I'm not certain what caused the condition. I was good one day and not getting the error messages the next day. But, I know what to look for in the future if it reoccurs. Thanks again.

CDs no longer displayed on music library on iTunes (Windows)

All my old CDs which were uploaded onto iTunes are no longer displayed in library anymore, although their folders are still where they used to be. The only music files displayed are the ones which were bought on-line. Any help on how to get all my CDs viewed back again?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Air Display for Windows 7 not working

I recently installed Air Display v1.6.1 for my iPad 2 and Air Display for Windows.
Both my laptop and iPad are connected to the same WiFi.
Whenever I click on my iPad's name in Air Display on my laptop, nothing happens. My iPad's screen still stays on the Air Display instruction screen with no flashing of the screen as I see on YouTube videos. Any help would be appreciated .

dwinpenny wrote:
Hi,
Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
Isight works fine in Mac OS (Skye, Oovoo, etc).
Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
Anyone got any ideas as to what I should do.
I have tried:
1. De-installing the driver and reinstalling
2. Have edited the registry in Windows to delete all references
The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
Hope you can help
Cheers
Dave W
Welcome to Discussions, Dave (dwinpenny)
I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
(1) Does this help you? http://kb.parallels.com/5028
(2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
http://xmeeting.sourceforge.net/pages/index.php
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

WVC54GCA: Video No Longer Displays on Windows 7

Similar Messages

Maybe you are looking for