WVC80-N Cisco/Linksys Home Monitoring Camera - recording schedule

Hi there. I have 2 questions regarding the camera. First, in the web interface, there is a menu tab for setting the recording schedule. You can select "start recording now" or "define recording schedule". The only problem is that it gives you a starting time and date and an ending time and date. Is there a way to select a schedule such as 8:00-10:00AM every week day? It seems to only allow me 1 range.
I see on the monitoring software there is a client that allows you to set a schedule like that. However, I want to stay away from a client if possible. (one more thing to flake out).
Also, is there a good viewer/organizer for the video files created? It looks like if I just use the camera web interface, it just dumps the files into a directory on the NAS drive that I choose. Does the pc client software import these files?
Thanks
Benjamin

You could consider using motion detection because it has more range compare to selecting the recording option; but then again the videos will only be sent either through email or ftp server. As for your 2nd query, there is actually no software (from linksys) that could organize or import the videos saved from this camera. Perhaps, there is a third party software will be able to do that.

Similar Messages

Is it possible to use a Linksys By Cisco Wireless-G Internet Home Monitoring Camera with Labview

I was wondering if it is possible to use a 'Linksys By Cisco Wireless-G Internet Home Monitoring Camera' with Labview
http://www.dabs.com/productview.aspx?Quicklinx=53PX&SearchType=1&SearchTerms=network+cameras&PageMod...
I wan't to be able to get the raw data from the camera and analyse it.
Message Edited by Jam.hall on 03-25-2009 09:03 AM
Solved!
Go to Solution.

Hi Jam.Hall
I am somewhat hesitant to say you will be able to use this camera with LabVIEW. It all depends on what functionality you are wanting to utilise on the camera, and how much video you want to analyze.
- If you want to use the wireless functionality, I am concered that the on board web server will compress and embed the video stream. I do not beleive this is something we can access in LabVIEW.
- If you wish to use the ethernet connection, if it is Gigabit Ethernet, then you should be able to use our IMAQ for GigE driver to bring in the feed, but looking at the specs for the camera, I'm not sure that this is an option.
- My other suggestion might be to utilise the record video stream function that the camera has. Depending on the format of the video file, you may be able to read in the recorded file and analyse it in LabVIEW.
If you could explain the purpose of your application, and what you would like to achieve with the system, there may be more suitable products that you can use.
Kind regards,
Sheela Sujeeun
Applications Engineer
National Instruments UK

IPad after update to 6.0.1 no longer stream video from my wireless Internet home monitoring camera. Help

I have a wireless-n Internet home monitoring camera system that before i upgraded to 6.0.1 streamed video. Does anyone have the similar issue who has fixed it?

I should mention that it no longer streams video. Duh.

Wireless-G Internet Home Monitoring Camera Utility doesn't have view screen

I'm having problems viewing my wvc54gca in the utility program. I can view it over the web, and I can watch everything in playback. However, the video monitor screen is not only blank/black, it shows whatever is in the window behind it. Meaning if I click over to my camera utility right now I will see this screen I am typing on right now through the area that should be my camera view. Everything else is working correctly as far as I can tell. I've downloaded the firmware. I've searched the forums. Not sure what I'm missing.

When you open the Camear utility,click on the setup button..It will search for your camear,select it and click on "add" and click on save...Now,close the utility and re-open it..

Home monitoring camera video storage time frame.

Hi,
I want to install an outside camera. At night there is some street light.
Does anyone know how long verizon stores the camera's video on their servers? Is the storage cost part of the $10 per month?
Also for outside, how is the nightime situation with the cameras. Is it better to do snapshot or streaming?
Thanks!

It's my understanding that the videos are stored on the Gateway device and not at Verizon.
The outdoor cameras have their own light source night time operations.
Here are examples of one of my outdoor cameras in day & night modes as viewed on my iPhone. The camera is mounted on my shed which is about 40 to 50 feet from the left corner of the house. Snapshot or streaming is about the same.

Linking Cisco Linksys E3000 uPnP media server to non uPnP Home Theater system

Hi,
I have a Cisco Linksys E3000 Wireless Router. My home theater system does not have uPnP capabilities. That is it doesn't have the uPnP client like a PS3 or a Wii.
Is there a uPnP client that I can buy for the specific purpose of connecting to my home theater system via ethernet.
The resulting connection graph will be as follows: NAS (via USB) to E3000, E3000 to uPnP client (using ethernet), uPnP client to Home Theater system using audio in or HDMI.
Thanks for your help!

If your Home Theater system has Ethernet port then I think you can try wireless bridge ( WET610N ) to make it wireless.

Need help configuring Cisco/Linksys wireless router to extend wi-fi signal to living room

My U-verse wireless gateway is in the back of our house. We live in an old 1920's home with solid wood walls. For our macbooks, we get a pretty decent signal, but my wife's iPad 2 get's poor wi-fi speeds. I bought a Cisco/Linksys WRT160N wireless N broadband router. I have a wired connection in my living room (going to a 4 port switch) then connected to my DVR. I tried hooking up the new router but ended up getting no signal on the iPad. In fact, it caused other issues. I ended up disconnecting it and re-booting my gateway. All came back fine. This wireless router replaces a similar unit that went out in after a power failure, so I know this can be done, but I forget exactly how I confiured the old one. I would like it to "extend" my signal to the living room, but I am also willing to create a new network (different SSID). Do I need to turn of DHCP? Are there any web sites that can assist me in configuring the router? I wish I didn't have to deal with this. The signal from the RG is great when you are in the back room (20+ down). But my wife gets about 3 down on her iPad in the living room. Thanks in advance.

Hi ,
I was doing some research on how this can be done. It does not appear there is an option in the Cisco router to set it up as an access point, but there are several options you can do to extend your network.
The first thing you can do is just set it up as a router behind router setup, and you will just have two separate networks. Make sure the DHCP pool does not conflict with the U-verse's gateway of 192.168.1.x.
The second thing you can do is connect the Ethernet cable to one of the LAN ports on your Cisco router instead of using the internet port. This should make it work like a smart switch.
With both setups, you want to probably change the SSID, network key, and wireless security settings to the same thing for wireless roaming abilities. That way, anyone that configures their wireless connection will be connected to both networks. Just make sure the wireless channels are not the same, and I would suggest having them at least 5 apart.
Hope this helps.
-ATTU-verseCare

Live Monitoring and Recording for VPN Remote CAD Agents in UCCX

Dear all,
We have deployed UCCX 5.0(2) for one of our customers.
Silent Monitoring and Recording are working fine for local agents.
We have deployed new Remote agents using IP Communicator and Cisco VPN on their PC. Everything is working fine but could not monitor or record them.
We have made site-to-site VPN using a PIX and give these agents Hard Phones 7942. Everything is working fine but could not monitor or record them.
We also installed WFO QM client on their PCs in order to record calls but no way !
Is there any way that we can use in order to make these agents silently monitored and recorded?
Thanks for all.

good afternoon,
I am not a senior guy but we experienced the same issues with monitoring users at home on VPN. After some trouble shooting I found that most users are on wireless and when I had them plug in with a cable we could hear their calls and record fine with no issues. Though, the agents preferred to be on wireless, of course! the senior engineer did mention something about changing the Codec and utilizing some DSP resources.
MM

Cannot found url error when i try to play my camera recorded video from my iphone 4S running ios 5.01

I got an error cannot Find url when i attempt to play my camera recorded video from my iphone 4S 32 gig. I try to restart my phone but still no luck. There was no problem previously, but suddenly i got this problem with no reason. I also unable to copy the video to my computer using itunes. So please helppp...
Thanks a ton!!
Note: My iphone 4S is running ios 5.01.

See if it helps to delete the firmware file and download a new one:
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.

CUCCX 8.0 - Call monitoring and recording

Hello,
I've worked with desktop-side monitoring and recording on various versions fo CUCCX in the past and have come to the point where this particular solution is not practicle anymore (we would need cordinate with the desktop group to install Cisco-approved NICs, and yes I am aware that there is a workaround but it doesn't work on NICs that do not support promiscuous mode.)
CUCCX supports a server-side method as well, but I have no experience in it and would like to find a how-to document. Would it work in a mixed network environment? Any pointers would be helpful.

Hi
In my experience the 'lack of support for promiscuous mode' NICs is vastly overstated. I've not come accross a single NIC that doesn't work. I suspect that document was written back when NICs were based on valves or something.
Typically the main issues are simple config errors - not doing span-to-pc-port, not daisy chaining PCs, etc.(And on v8.0+ it's usually due to the services falling over, which will ruin things for you whether you use CAD or server-side monitoring!)
RE: server side monitoring - I've worked on some fairly large SPAN based deployments. UCCX is pretty agnostic, you just need to make sure it sees each conversation (and sees each one only once!) using whatever SPAN config you can. It's more a question of how handy you are with networking than anything specific to UCCX.
Regards
Aaron

How can I get the "Multi-Camera Record" button to show up in the Multi-Camera editor?

I've used the Multi-Camera editor in Premiere for years but in the most recent update (Adobe Premiere Pro CC 2014) I can't get the Multi-Camera Editor to record my camera switches. I looked for the Multi-Camera Record button but it wasn't where it used to be, and even when hitting the plus sign to add more buttons it does not appear in that menu either.
What am I missing here? Please help. Thank you.

Did you try it in the program monitor?

Cisco Video Surveillance 3520 software recording capabilities

Hi,
i want to buy a single Cisco Video Surveillance 3520 camera, i know that there is a free software which come with this camera, but i am not sure if that software has recording capabilities, please can anyone verify if it has, or i have to buy some additional software ?!!

Yassar,
Per Cisco's white sheet on this model:
Local storage. Video data can automatically be recorded to a microSD card when the camera loses network connectivity.
But to stream parent proxies to a seperate storage device you need a media server to capture the RTP packets after HTTPS and RSTP has set up the connection.
http://www.cisco.com/c/en/us/products/collateral/physical-security/video-surveillance-3000-series-ip-cameras/data_sheets_c78-723172.html

Onfigure a WAP54G to act as a repeater for my wireless network hosted by a Cisco/Linksys WAP610AP

How can I configure a WAP54G to act as a repeater for my wireless network hosted by a Cisco/Linksys WAP610AP
I am using ONLY 2.4GHz wireless band on the WAP610AP running Firmware Version 1.0.04
The signal from WAP610AP is weak in my home office and I would like to use the WAP54G as the repeater. Is this possible? If yes, please help!
TIA

This statement is according to the WAP’s user interface: When set to "AP Client" and "WirelessBridge" mode, this device will only communicate with another Linksys Access Point (WAP54G). When set to "Wireless Repeater" mode, this device will only communicate with another Linksys Access Point (WAP54G) and Linksys Wireless-G Router (WRT54G). In a nutshell, the WAP54G may have a big possibility that it will not work on that device.

Monitoring and recording IPCommunicator

hi, what do i need to enable to monitor and record an agent that uses an IP Communicator? thanks!

Hi,
Here is the doc to configure Desktop monitoring and recording:
In CIPC while running postinstall select the NIC adaptor of the PC:
http://www.cisco.com/en/US/customer/products/sw/custcosw/ps1846/products_tech_note09186a008075025a.shtml
HTH

Disappointed CISCO-LINKSYS ~~~ after-sales support of E4200V1 ~~

Hi guys,
I'd like to express my feeling of purchased E4200V1.
I bought E4200V1 around 1 yr. Before that , I was considering E4200V1 (just has HW ver.1) and ASUS - RTN56U.
Finally, I voted CISCO-LINKSYS.
Hoewever, CISCO Development team does not keep the improvement of their product and they trend to release E4200V2.
In contrast to ASUS,, their R&D pay their heart to customer to keep improvment of thier products
http://usa.asus.com/Networks/Wireless_Routers/RTN56U/#download Their firmware is keeping update.
In E4200V1, even many victims (who chose E4200V1) compliant the firmware.
But CISCO -LINKSYS seems like do not care.............
Hey guy, will you select CISCO - LINKSYS series products next time ? To me, absolutely not !
koklee

I have the same router as well. I agree with you. Cisco/Linksys are extremely slow on the firmware front to fix bugs and make new enhancements. I have suggested a traffic meter many times to monitor daily/weekly/monthly bandwidth. That alone is pretty standard on all new routers. Yet Cisco/Linksys still does not have one today. Even with the lateast EA4500.

WVC80-N Cisco/Linksys Home Monitoring Camera - recording schedule

Similar Messages

Maybe you are looking for