WVC80N cannot see the image with VLC when multicasting

I am using the WVC80N camera and have set the multicast address to 225.0.0.6 and the port to 2006 but when I try to view the image with VLC I cannot see and image. HTTP and rtsp both work but I need to use multicasting, has anyone gotten this to work?

When you talk about the multicast , may I know if where is it set? Is it set on the route,server or computer? When you talk about VLC, where you referring to the VLC media player? Is also possible if you will show us a complete diagram on how your network has been setup so that we will be able to provide you the right recommendation.

Similar Messages

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV

I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV . My photo apps is Version 1.0 (209.52.0)

Have you tried deleting the photo cache from your computer and then re-trying the photo sync and see if they all then copy over (you need to select and sync all the photos that you want on the iPad together in one go, as only the most recent photo sync remains on the iPad) ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
Don't know about the Facebook photo emailing, but there are a number of apps that allow to upload photos to their site (e.g. the 'official' Facebook app).
(For future info, typing all in capitals is considered SHOUTING - you are more likely to get help/responses if you don't.)

Picture appears white (cannot see the image) when using camera raw filter in photoshop cc

I have a fresh install of Photoshop CC on my macbook. I am running into an issue when editing an image in Photoshop cc and using the camera raw filter. If I choose the camera raw filter camera raw opens up but all I see is white - the picture is not showing within the camera raw interface. This happens whenever I am working on a layer and apply the camera raw filter. The only time it works is when I do not have any layers but only the image as it comes directly from within camera raw - then it works fine. I'm guessing there is something really basic I am missing but it is maddening!

You are welcome.
The Camera RAW filter will not work on an adjustment layer alone. Select the layer with the image and the adjustment layer and convert to a smart object to apply the Camera RAW filter to the image with the adjustment layer applied.

When I open an image in Photoshop, I cannot see the file. The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

When I open Photoshop CS6 I cannot view the image. The thumbnail is visible on the right hand side and the work area shows the file information, but no image. I have updated PS, my driver. It is the same for both jpg or RAW.

Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
Benjamin

Why I cannot see the "Java Development " tag when I finished installation

Hi all
I have finished my reinstall of SAP Netweaver, and granted administrator all roles, but I still cannot see the "Java Development" tag in the head of the page. I don't know why.
How can I do it?
Regards

Hi Wang,
The Java development role comes after the installation of the PDK file to your portal.
For Java development role, download the latest PDK from SDN and then import the .epa file in the portal. After its installation you will see the Java Devlopment role. Assign the role to the user and refresh the portal.
Follow these steps:
Once you have downloaded the PDK. Just extract it. You would have got the .rar file. For extracting this you use some rar extracter. If you want you can download the winrar from the following site:
Winrar Setup: http://www.freedownloadscenter.com/Utilities/Compression_and_Zip_File_Utilities/WinRAR.html
Then you can import this epa file into portal. When you will import this .epa file a new role for Java development will be added to the portal. Assign this role to your User.
For importing the .epa file .epa file u need to import from the portal (System Admin>Transport>Import). Here just give the path of your extracted .epa file.
Role Name: com.sap.pdk.JavaDeveloper
Now you are ready to use the PDK from EP.
I hope this helps you!!
Regards
Pravesh
PS: Please consider rewarding points if helpful or solved.

I cannot see my photos in iphoto library - I tried to restore with Time Machine and that doubled the number of photos (copies) but I still cannot see the images - the events are there but no thumbnails although the number of pics per event is correct...

Can someone help me see my pictures again in iphoto? 3 weeks ago while uploading a video from iphoto to Facebook, my events thumbnails all disappeared and were replaced by black squares - the event names and number of pics in each remain but when I click on the event, I only get squares where the pics should be - when I click those squares, I get a square with a triangle and an exclamation mark in middle.
Apple had emailed me about defective disks in iMacs so I took mine to the Apple Store and they replaced my HD then reinstalled from my backup via Time Machine - I still cannot see my pics! I tried to reinstall from an earlier Time Machine date - that copied everything and now my HD has double the amount of data but I still cannot see my pictures!
I would be thankful for any guidance on how to retrieve my pictures...
Thank you.

iPhoto 6 and later: Rebuilding the iPhoto library

After making a podcast on garageband, i exported the podcast to disk. But when i opened it as quicktime player, i was only able to hear the audio. I cannot see the images that i put on the podcast. Does anyone know why or a solution?

I already shared it as an AAC Encoder instead of MP3 Encoder, but it still will not show the images.

Nevermind. I found a solution.

Cannot see the List region in when trying to create it

Hi Guys,
I am trying to create the List region but cannot access it in my application when I try to create a region.
In Sample Database Application I can easiily do that,
http://i.imgur.com/26ASO.png
but in my application the option is missing.
http://i.imgur.com/oGiJQ.png
I've tried switching to 21. Scarlet theme but no luck as well. Unsure what I have to do to create a List region.
APEX 4.1.1

Hi,
First go to shared components and create a list entry. Now go to create wizard in any page and you should see the List item.

I'm still seeing the problem with printing when css overflow is hidden (bug 104040) which I had heard was claimed fixed

Example:
http://scaled.com/projects/whiteknighttwo_spaceshiptwo_test_summaries
User: firefox 40b7/32 on fedora core 11 x86_64
Linux 2.6.30.8-64.fc11.x86_64 #1 SMP
Symptom: printout truncates at end of first page instead of printing several pages of information
I've seen this behavior on many websites, this is an example
I can fix it by copying the page and hacking the css to remove all cases of "overflow:hidden". But really firefox needs to handle this - I just discovered from googling that something like this has been a known problem for 10 years.

I just thought I should post this comment, to say my long running problem has finally....FINALLY been sorted out!
It was actually really fixed at the end of September, but I have waited till now, until I received my first proper bill to feel confident enough to say it is finally sorted out.....but what a long winded process!...it took over a month to sort this out, with endless hours on the phone, and endless promises not kept.
The problem with BT's customer service is the fact that going through normal channels, no one person can sort a problem out. You get passed from pillar to post, with every department saying that it is someone else's area of responsibility and then it takes hours on the phone with various deparments in different countries, to get a commitment to sort it out, and then nothing happens!
It was only after posting my final desperate plea on this forum, for all the world to see, that I finally got one of the Moderators to take up my case, and sort the problem out, although it took him over a month to get through all the treacle of BT's admin before a solution was found.
I am very greatful to the Mods for dealing with my problem, which was not of my making, but was due to something going wrong with BT's system.
There is however something fundamentally wrong with BT's Customer Service set up, where no one person seems to take responsibilty for a CXXk-up on their part, and seems unable to have the authority to sort it out.
Once again, Thank you Mods for your help.

Cannot find the partner with BAPI_SALESORDER_CHANGE when I use alphanumeric

I try to use the BAPI_SALESORDER_CHANGE to create a sales order, however the BAPI fill with zero at the beginning of the ID partner.
For example If I had the ID partner 123456 when I use the BAPI_SALESORDER_CHANGE, the BAPI automatically filled 4 zeros at the beginning of the number = 0000123456 with this number the BAPI can find the ID partner in the SAP Tables.
However,
If I had the ID partner IC4100 when I try to use the BAPI_SALESORDER_CHANGE, the BAPI automatically filled 4 zeros at the beginning of the ID = 0000IC4100 with this number the BAPI canu2019t find the ID partner in the SAP tables.
Could anybody help me please? How can I use an alphanumeric ID for the partner function?
Thanks,
Adriana

Hi,
I think in this case use the Conversion Alpha exit for this Partner. CONVERSION_EXIT_ALPHA_INPUT try to pass the fields of type KUNNR.
Let me know if any.
Regards,
Srinivas

HT6154 When I am texting or checking e-mails, my phone screen gradually clouds/fogs over until I cannot see the screen, then clears when I stop. What is the problem?

Is anyone else having screen fogging ovr issues when using the 5s?

Hello Ingsource,
Your pressing too hard on your screen, This isn't nessasary.
^Connor

I cannot see the videos stored in 'videos' on my iphone 4s to transfer them. The videos in my photo stream transfer over when connected to a pc.

I cannot see the videos in 'videos' when connectedto a pc to transfer them over then delete. I can see the videos & transfer them from the photo stream.

Correcion - the videos in the photo stream are different videos. I need to move & delete the videos in 'videos'.

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
Warning: Error in parsing value for 'cursor'. Declaration dropped.
Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
Line: 116
ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
Line: 837
== This happened ==
Every time Firefox opened
== 2 days ago after update.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

I work for a retailer who sends out e-receipts as pdf attachements. When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment. Any ideas?

i work for a retailer who sends out e-receipts as pdf attachements. When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment. Any ideas?

i have scrolled left, right, up and down on iphone4, iphone5 and ipad and the attachment simply does not exist. It has to be something with the apple mail client setup because for any mail client, if they go to the webemail thru safari, the attachment is there and it can be viewed without issue.
I know there are plenty of people out there with this issue with the mail clients set up that you access thru the email icon on the iphone and ipad but i cannot find anyone with a resolution. I cannot find any settings in the mail client setup that has anything to do with attachments or for what attachments can or cannot be read or seen.
Hopefully someone out there has figured something out because this is an odd one.

When working in my photo album in iphoto my photos are replaced with a grey box and an !. I can't see the image on the page.

Lately when I am working in my photo album in iPhoto my images are replaced with a grey box and an ! . I can't see the images on the page. All my photos are high quality. What am I doing wrong?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

WVC80N cannot see the image with VLC when multicasting

Similar Messages

Maybe you are looking for