WVC80N: Unable to setup wireless

I just bought this camera. Spend 3 hours trying to get it setup. I could not get pass the wireless setup. It kept saying camera not detected. It does work when it is wired to the router with the ethernet cable. The router is from verizon FiOS. My computer connects to the internet wirelessly. I have one more device that is connected to the router directly.

I had the exact same problem, and finally got to the bottom of it. All the FW upgrade bla bla, is useless.
The crux of the issue is the way cisco tries to set up my wireless access.
I have WEP set up as open system, but the WVC80N defaults to shared key.
here is my workaround:
follow the set up from scratch. If you want to set up DDNS with TZO, DO NOT disconnect the eth cable, and continue through the wireless set up. The setup will detect the camera and assume it is on wireless while you are on wire still, this will let you go through wireless and continue and finish up with TZO setup.
Then, after you get things working wired, go to the configured private IP for camera: 192.168.0.245 in my case. Then, from the web gui, go to wireless security settings, and manually configure your wireless, ie., WEP key, open system, etc. matching your router settings.
Unplug eth, reboot, and hopefully it will be good to go.
This was not really "it just works" for me, I guess since i have a non-linksys router, but i am glad it was doable at the end!

Similar Messages

On an M425dn, I am unable to setup scan to network folder on a home wireless network

On an M425dn MFP, I am unable to setup 'Scan to Network Folder' on a home wireless network. The network folder exists and has been set to share with full permissions for everyone. The OS is Windows 7. The printer IP address is 192.168.1.104. I have used this in a browser to access the setup tab called Scan. I have established a network folder and have attempted to test the setup folder multiple times. The tests end in one of two ways. The attempt spins endlessly which requires a cancel action or it ends with the following error: "Cannot connect to the network folder. Ensure the shared folder name is correct." The network folder does indeed exist.
The computer name is Delta. The shared folder name is Images on my A: drive.
So the network path entered is \\DELTA\Images. By the way, printing to this network printer is always a succesful operation. Any guidance to solving this dilemma will be greatly appreciated. Thanks in advance.

Google may have "locked" IMAP and/or POP access to your account. To unlock it go here:
https://accounts.google.com/b/0/DisplayUnlockCaptcha
Then try setting the account up on the phone again.

Changed Router - Can't Setup Wireless printing

I recently changed my internet router. i did have my printer setup with wireless printing, now i cant connect to the new router.

Hi , Welcome to the HP Support Forums! I see you have recently replaced your Router and now you are unable to print wirelessly to your HP Deskjet 3052A from your Mac running the Mavericks 10.9 Operating system. I would like you to go ahead and start here: Wireless Printer Setup (OS X) Because you have a new Router, you will need to connect the Printer to your new wireless network. I hope this helps, let me know the outcome. Thanks,

Unable to setup eprint

Unable to setup eprint.
My printer was working with eprint fine until I got a new router. Since then I cannot seem to use or setup eprint.
It is connected on the home wireless network and this is working fine to print documents.
I have reset factory settings for webservices but still no luck. Keep coming up that I am not connected to a network and wants a proxy
Can anyone help
Thanks
This question was solved.
View Solution.

Try restarting your Wifi - Router.
Check the maximum number of devices that can be connected to your Wifi - Router.
Try disconnecting other devices and connect your Printer and Laptop to the router and try the below option.
EPrint Setup Process for your printer.
1. Connect the printer to a network with Internet Connection. (Make sure your laptop or Computer is connected to the same network as Printer)
2. Check the Printers IP address on the printers front panel.
3. Type the IP address of the printer on a browser on your computer and press Enter.
4. On the Webpage that appears click HP Web Services Tab.
5. If your network supports proxy you can add the proxy in this page.
6. Review and accept the terms of use, and then click Enable Button.
7. The printer should print an information sheet with code on that.
8. <code>@hpeprint.com will be your email ID.
This is just a method to register the printer to cloud from the Laptop. You can also try to register the printer from front panel as well.
Hope this helps.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

Unable to Print Wireless anymore HP LaserJet Pro 200 Color M251nw

I've owned my extremely good HP LaserJet Pro 200 Color M251nw for around 10 months now but all of a sudden it has stopped printing wireless. If I print via a USB it works fine. I have downloaded new drivers and Firmware, done numerious restarts on both mac/pcs and printer but this still hasn't fixed the issue. I have run a number of Network Tests and all are coming back OK. When I try to configure the machine using the Online Printer Utility it cannt connect to my network (even though the self diagnostic test on pritner tells me everything is OK. I am running a mixture of both Mac and PC's and cant print from any of my devices. Bonjour print is enabled on the pritner but i cant see a bonjour IP address on my Mac.
Printer is still under warrenty but obviously feel that this is a last resort.

Hi @bluemango,
I see by your post that the printer stopped working over the wireless network. I can help you with this.
Restore the network defaults on the printer.
Go to setup, network setup, restore defaults.
Power cycle the router and computers.
Then run the wireless setup on the printer.
Go to setup, network setup, wireless menu, wireless setup wizard.
Print off a configuration page, to make sure the printer has a valid IP address.
Printing a Configuration Report. Print the report from the printer's control panel.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer or Safari)
If it loads the printer's network page then the printer is on the network.
On the Mac, try and add the printer through Printers and Scanners or run the installation.
On the Windows computer, run the add printer wizard through the printers window or run the installation.
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet Pro 8500A unable to connect wirelessly to Ubee Modem/Router

I recently upgraded to a new "all in one" Ubee Modem Router (Model DDW366) and have spent hours attempting to wirelessly (both using Wizard and entering info by hand) print, but nothing has worked. The only way I am able to print at this time is by printer cable connected to my MacBook Pro. I'm unable to print wirelessly from my MacBook Pro, iPhone and iPad.
HP will not advise me on how to solve this problem as printer is no longer under warranty and Cox Cable who sold me the Modem/Router combo are not willing to assist with this problem.
Can anyone advise me on how to print wirelessly again?

Hello @drlogan0,
Welcome to the HP forums.
I understand that you are encountering problems with getting your Officejet pro 8500A onto your new wireless network.
I would like to help.
i would try restoring the network defaults. This will help erase any 'old' information that may be stuck in the printers memory. I would like to give you specific steps for this, but I am unsure if you have the 8500A, 8500A wireless, or the 8500A premium.
Basically the steps are, go into the network menu, and select restore network defaults.
If you have tried restoring the network defaults already, please review the following troubleshooting documents.
Setting Up the Printer for a Wired or Wireless Network for the HP Officejet Pro 8500A
Printer Does Not Maintain Wireless Connection
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT5552 I am unable to setup payment method using American Express.

I am unable to setup payment method using American Express.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to setup Wireless Clients MAC+Active Directory based acess

Dear Gents,
I want to setup Wireless Clients MAC+Active Directory based acess on AP 1242 standalone Wireless series .
Steps i have configured :
1) SSID manger under Open authentication : Selected with EAP.
2) under advacned Radius : s
MAC Address Authentication
MAC Addresses Authenticated by:
Authentication Server Only
3) Server Manger : Current server list
added the radius ip address 10.1.200.x
EAP Authentication
MAC Authentication
Accounting
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
From ACS - Radius we have choose a Group x( named as Mac-address group )
All the wireless Client ( laptops ) mac-address are added as add username option and enter username
as mac-address & enter the mac-address as pwd second option of password TAB.

Hi Akber,
I think you didnt understood what i was trying to say here :-( No problem..I will explain my theory again.Your requirment is to autheticate user from ACS internal database (you have already added the MAC address as the username on your ACS internal database) as well as from ACS external database (in your case this is AD).
What i was saying is when when authetication request comes to raidus server it checks its internal database and if it find a valid username and password (here it will the MAC address and password which you have entered to the ACS database) the ACS will not query the external database (in your case the AD) for authetication.
You can not have ACS to look in to both MAC and AD database at the same time.
Hope this clears your doubt.
Regards
Najaf

Unable to connect wirelessly on an Acer laptop using Vista

I have a Windows XP connected wirelessly to my Verizon Router M1424WR, but I am unable to connect wirelessly on an Acer laptop using Vista. The Vista can only connect with Ethernet. It will not accept the WEP key.

#1 Check the level of WEP. Two examples: 64 Bit, 128 Bit.
#2 And check to be sure, if you use a WEP password of Hex or Ascii.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I have a sync account and used to keep sync with firefox server. Now computer got re-installed and want to sync data from firefox sync server. But I am unable to setup as i dont have sync key.

I have a sync account and used to keep sync with Firefox server. Now computer got re-installed(OS) and want to sync data from Firefox sync server. But I am unable to setup as i don't have sync key.
I would like to just sync with Firefox Sync Server with existing account. I can not find any way out for this. please reply me on
[email protected]

hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...

FF4580 unable to connect Wireless - Windows 8

I have historically used the HP F4580 on XP and Windows 7 but not wirelessly. I have a new PC running Windows 8 64 Bit and am trying to re install the F4580 but would prefer it to run wirelessly.
I have downloaded the software and drivers from the HP website and the printer works fine using a USB connection.
I am trying to convert from USB to wireless using the HP installation and it states my SSID is not available.Even when I type in the SSID it states it is not avaialable. It then tells me the printer I have selected is not connected.
I have added the printer using the mac address to my router as a trusted source.
I have configured the wireless network direct from the device using the wizard and have an IP address for the printer.
The scan print states that wireless is up and running and working ok but I cannot print to it wirelessly. As soon as I remove the USB the printer is unavailable.
I have tried removing the printer and rebooting and reinstalling. I have disabled antivirus and firewalls but still am unable to print wirelessly.
Does anyone have any other ideas or have I missed something really simple.
Thanks
This question was solved.
View Solution.

Hi,
Many thanks to let us know problem solved.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am unable to setup facetime and imessages on my mobile no.

Hi! I have iphone5 16Gb. I am unable to setup facetime and imessages on my mobile no. every time I sign in using my apple id,it only uses the email id for send & receive. I have created new apple Id too but still facing the same problem. I have tried it many times but now its has been a month. I am helpless. Please provide me the solution.

Hi pbatta,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
- Judy

8.1.7 install error: Unable to Setup Inventory

I have problem with the installation of 8i 8.1.7.
After the first Welcome , and the second Source and Destine, the next windows don't appear. The message "Unable to Setup Inventory, You may no have proper permissions" display.
Oracle 8.1.7, for AIX 4.3.3

I've run into this when I had 2 Oracle homes (each with a different user -- oracle & ias, but the same group -- oinstall). It was a permission problem.
I'd check 2 things. First, that the ownership is correct. If not, fix by something along the lines of chown -R oracle.oinstall $ORACLE_HOME/oraInventory. Second, make sure the permissions are right on the directory. For the oraInventory directory, I usually do chmod -R 775 oraInventory (you could get away with a 755 as long as you only have one owner for the system, which sounds like the case -- I use the 775 because of the two owner issue I mentioned before). That should do it.

WVC80N: Unable to setup wireless

Similar Messages

Maybe you are looking for