WVCGA- File names; Audio in 3gp and rtsp..

Hi guys, new to this forum and I have found great solutions for my camera's setup by reading all your posts...
For the WVCG54A Does anybody know what the logic is for the video file names ? When I get email the filename starts with the date and then the time as in "0904171758" which is a very convenient way for staorage and filing in my pc , but when I use the software to directly record to my computer within my home network, I get file with names that start with 1234 and look like 12349975790 which makes no sense at all as they do not relate to any data thatI can think of. Anybody know how to change this setting?
Also, I can not listen to audio in files sent by email in 3gp format, I can though, in SEF files stored directly within my home network. anybody knows if there is a way around it?.
One more, No audio while streaming thorugh rtsp. Anybody knows if this is by design or are there any codecs to use?
Thanks in advance!!
BB

Hi carrot , Thank yo for your help.
I can change the file names but since I have the camera set to record 8 hours a day continuosly, I get many 4-minute files and as you can imagine changing the names manually is a maaaajor task, this is why I was looking for them to be named under some kind of logical system..
For Rtsp I use real player and I have the latest sotware update, but still I can't get audio....
Take care...

Similar Messages

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

How to send files like audio,video,images and text via RMI..

Hi everyone,
As I am working under a project, my own, of creating a chat machine, I've thought to make it capable of doing everything that MSN or yahoo MSN can do. Till now I've just been able to send messages and some small icons as expressions. So, my next step will be making my progam able to send even other files like audio, video, images and text to the person on the other machine to whom I'm chatting. But as I don't have any idea on how to start doing it, I want anyone who think he/she can help me to give me the basic logic that is used to do so. I would very much appreciate it. I've used vectors to store the text messages which is visible to all the users using the chat program enabling them to see various messages in it.
thank you...
Jay

Hi,
Now, I got stuck because the code doesn't seem to work well. For large files with around 40 mb or more size couldn't be sent. I have constructed the code, just rough sketch, as follows:
** In the Server Implementation class I've used FileInputStream to read the contents of a file that is sent as an argument to the method.
** Similarly, in the client side I've used RandomAccessFile to save the received array of bytes.
public void sendFile(File f)
   ChatServer cs=(ChatServer)Naming.lookup("rmi://localhost/ChatServer");
   cs.readsAndStoreTheFileInTheServer(f); // In the Server Implementation the contents of the file is read and saved in an array of byte. later method is invoked by the client to get the array of the saved byte.
   cs.message("-Accept-"); // When a client receives this word then a JComponent with accept and cancel button will be constructed from where other clients can save/cancel the sent file.
}For small size files this code works well but for files more than 40 mb of size it is useless. I wonder if there's any other alternative.
regards,
Jay

How to insert the file name to the start and the end of a SQL file by a powershell script

I just began to learn powershell script and I have a problem that I cannot figure out. I have a lot of .sql files. I need to insert its file name to the beginning of the file (After USE statement) and the end of the file (before the last END statement). Is
there anybody knowing how to do this?
Thanks so much
Regards

Actually, I want to add a insert SQL statement to the beginning of the file and the end of the file. Only the file name is a variable and different among
different files. All the other sql statements are the same and can be hard coded. Hopefully it helps –
The problem I think is that I want to add the same thing (except the file name) to hundreds of sql files and only the file name is different. I do not want
to add it manually and want to use a script to add it –

What are shortest file names for outlook express and PSE11 to import photos pls

what are shortest file names for outlook express and PSE11 to import photos pls

Hi, Troubled. The size of the file name is pretty much irrelevant here to PSE, but to answer your question directly, you will be able to import a file that has only a single character as its file name (plus the file name needs to have the required extension, such as .jpg)

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

Clendenen02 wrote:
2) It would be equally helpful if there was something that would take the name of the picture file and spotlight comment, copy and paste it to a movie file's comments with the same name but obviously has different extention. For an example
In a Pictures folder
Name: Dark Knight, The.jpeg Comment: (2008) Genre: Action... <- copy comment
In a Movie Folder
Name: Dark Knight, The.m4v Comment: <- paste
and do this for all 700 files
This Bash script will do it.
Edit "PicDir" and "MovDir" to the location of your Folders
(Note: The comment is written to the m4v file using xattr, so the Spotlight comment field appears blank in Finder, but the comment metadata is still indexed by Spotlight (If you add a Spotlight comment from Finder, it is stored both as an extended attribute and in a .DS_Store file)
#!/bin/bash
PicDir=$HOME/Desktop/Pictures
MovDir=$HOME/Desktop/Movies
for f in $PicDir/*
do
 if [ ! -d "$f" -a "${f##*.}" == "jpeg" ]; then
 comment=$(mdls -raw -name kMDItemFinderComment "$f")
 if [[ $comment != "(null)" ]]; then
 picname=${f##*/}
 movname=${picname%.*}.m4v
 if [ -e "$MovDir"/$movname ]; then
 xattr -w com.apple.metadata:kMDItemFinderComment "\"$comment\"" "$MovDir"/$movname
 fi
 fi
 fi
done

How to get the incoming file name using JMS adapter and SOAP adapter

Hi Everybody,
 In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to SAP IDOC.
my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
EX:
<IDOC
<REF>price<DateTimestamp>.txt</REF>
</IDOC>
Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
Thanks
raj

If they are passing it in message id or correlation id,
you can access it using
<xsl:variable name="dynamic-conf"
 select="map:get($inputparam, 'DynamicConfiguration')" />
 <xsl:variable name="dynamic-key"
 select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
 <xsl:variable name="dynamic-value"
 select="dyn:get($dynamic-conf, $dynamic-key)" />
Check this:
http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Thanks,
Beena.

B2B 11g: Getting File Name in inbound integration and passing it to SOA

Hi,
I am Reading a EDI x12 file in inbound B2B .I am checking the 'preserve File Name' check Box at Listening channel properties.....Then Integrating B2B to soa using AQ Adapter.But I couldn't find any property where I can pass the file name which I read through B2b to Composite. I need the file name because I am inserting all the records in Database and client wants to see which record in DB has been inserted from which file.
Any pointers would be helpful.

Hello,
Try to use the b2b.fileName property. Although it probably is not shown on the list you should be able to access it.
Also, please check the patch 18021286 which has many improvements and allows for two cases that can be useful for you:
- Get information on back-end about which channel and agreement was used to deliver
- Using callout Ret values which allow for specific properties to be set on callouts and passed all the way until the back-end application.
Hope this helps.
Best Regards
Tiago Teixeira

File to File, multiple receivers, file name shrink between IE and AE

Hi Expetrs,
I have a scenario, where there is a FTP sender adapter with adpater specific message attributes on for file name and folder. Then on Integration Engine, the message is sent to two receivers and the messages go back to Adapter engine. On receiver communicate via FTP including secure connection, one NFS... But what I see is that the file name is different for NFS and FTP receiver. NFS file name is shrinked, and FTP contains the source value...
The point is that when I'm checking message header on adapter engine for NFS receiver I see that the file name is shrinked from
DBDC-PROD_GMA_28042014060034679_AFB120.SNL18169D11398664841838226S
to
DBDC-PROD_GMA_28042014060034679_AFB120.SNL1816
For FTP it is ok.
On Integration engine both messages contains still correct file name, so I believe the file name is shrinked on AE...
Do you know why?
Best regards,
Milan

Hi Iñaki,
You mean the receiver business system OS? How does the adapter engine knows the receiver OS?...
I really see in AE in message header for two messages two different file names, even the source is just one message with one file name... I think this is really some kind of issue in PI.
Thanks for answer,
Milan

Unique file name to be decoded and to be updated in a table along with data

Hi
I'm working on a File to Proxy scenario, where the file names(10 chars length) are unique. These files will be available for XI in a source directory. My requirement is -- file name need to be decoded into 3 values and to be updated into a r/3 database table along with the file data.
Hope my requirement is clear.
Thanks.

You cannot see the field which stores the file name. The file name comes from payload at runtime.
Secondly no need to create any input parametes in your UDF, just edit your udf and delete the input parameter (default input is 'a') so that you don't have to map any constant to this UDF just map this UDF to target field.
e.g. UDF ---> target Field.
I did the same but am not able to activate the mapping.
Mapping activation Error:
Activation of the change list canceled Check result for Message Mapping hello_mapping | http://briks.com:
Mapping not sufficiently defined
Chennai.

Files saved on memory stick on pc show as original file name followed by .XML and i cannot open why

files saved on memory stick on pc show as original file name followed by .XML for example tester.doc.XML, is there any reason? I cant open these on mac, if i put it back in PC is shows file as normal without .XML. Confused.com any ideas.

I have files on my work laptop (PC) e.g. document1.doc (word document), I then save it to my memory stick (which i have reformatted, I also tried my external disk drive) and then take that to my macbook, plug it in and in finder it then shows as document1.doc.XML, which i cannot open. It happens to all types of files, it just seems to add .XML on the end of everything.

Idoc to file with file name as ABCD timestamp and count

Hi,
Greetings!
I have an requirement like iDoc to File and the output file name should be ABCDYYMMDDXX (e.g ABCD14091701) in PI 7.1
where,
Default = ABCD
YY = year
MM = month
DD = date
XX = sequence no. on the same day; e.g. first batch on same day = 01, second batch on the dame day = 02
I tried checking many blogs but its not meeting this requirement.
Kindly please help me out in completing this interface.
Regards,
Vinoth

Hi Vinoth,
Below is the code. Use it in-conjunction with your dynamic config code.
String inputFile = "D:\\Receiver"; //This is your target receiver folder
String dateStr = DateFormat.getDateInstance().format(new Date());
dateStr = dateStr.substring(0, 2)+ dateStr.substring(3, 5)+ dateStr.substring(8,10);
final String fileNamePattern = "DEFAULT"+dateStr;
File file = new File(inputFile);
File[] listFiles = file.listFiles(new FilenameFilter() {
@Override
public boolean accept(File dir, String name) {
if(name.contains(fileNamePattern))
return true;
return false;
//System.out.println("Number of files in the directory "+inputFile+" : Next Counter"+ (listFiles.length+1));
int counter = listFiles.length+1;
String fileName = "";
if(counter < 10)
fileName = fileNamePattern+0+counter;
else
fileName = fileNamePattern+counter;
System.out.println("Name of the file will be:"+fileName);
Hope it helps!
Best Regards,
Anand Patil

Parsing a File Name into A Timestamp and Applying it as Metadata

Hello, I am working on a lo-fi photographic documentation project, and the camera I am using does not record EXIF information. The extent of the metadata it provides is in the naming convention which is in the format of "DD-MM-YY_HHMM.jpg". What I am trying to do is create a script to take a selection of images and parse the filename into a timestamp to apply it into the IPTC and EXIF properties and also add in the EXIF Make, Model, et al. The following code I am in the process of working on but have hit a block. After the line: "var md = file.metadata;" nothing seems to happen. I have placed an arbitrary "Window.alert("Hi")" in just to see if it would get executed and it did not. Can anyone explain why this is and why I get no error response if something is in fact wrong? #target "bridge" normalize = new MenuElement( "command", "Normalize Motorola v220 Images", "at the end of Tools"); normalize.onSelect = function() { // Get The Selected Images var images = app.document.selections; for (i=0; i<images.length; i++) { // Declare File Variable var file = images[i]; if (images[i].mimeType == "image/jpeg") { // Parse filename into date var fn = file.name; var timestamp = "20"+fn.substr(6,2)+"-"+fn.substr(3,2)+"-"+fn.substr(0,2)+"T"+fn.substr(9,2)+":"+fn.subst r(11,2)+":00"; // Get Metadata var md = file.metadata; // Apply Date to EXIF Metadata md.namespace = "http://ns.adobe.com/exif/1.0/"; md.DateTime = timestamp; md.DateTimeOriginal = timestamp; md.DateTimeDigitized = timestamp; // Apply Date to IPTC Core md.namespace = "http://ns.adobe.com/photoshop/1.0/"; md.DateCreated = timestamp.substr(0,10); // Apply Motorola v220 Related Metadata md.namespace = "http://ns.adobe.com/tiff/1.0/"; md.Make = "Motorola"; md.Model = "Motorola v220"; // Apply User Specific Data // Rename file } else { // Give an Alert that the Image isn't a JPEG Window.alert(file.name+" isn't a JPEG"); }; file.refresh(); }; }; I would also like to rename the files to the timestamp sans the colons but that will come after. Help.

That didnt seem to work, the same full filename (minus the extension) still prints. Here is more of the script. I tried to attach the whole thing but it wouldnt upload.
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.PERCENT;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = "";
// Set font size in Points
myTextRef.size = 24;
//Set font - use GetFontName.js to get exact name
//myTextRef.font = "TimesNewRomanPSMT";
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 255;
newColor.rgb.green = 255;
newColor.rgb.blue = 255;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 2 , 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
I really appreciate the help.

Infpackage with logical file name having current year and month

Hello all,
I am using the FILE transaction to maintain the logical file name for infopackage loads in BW.This logicalfile name is to be assigned to physical csv file in AL11 directory.
This csv file would be having the current month and date at the end of the name for e.g for the month of April 2008,the file name would be say xx_200804.csv.I wanted to know if by using the palceholder <YEAR><MONTH> in the physical file name ,would the current month date and month be automatically concatenated at the end of file name ?Has anyone used this option before?

yes it does work,i tried out finally and the system picks current month and year

All excel attachment files in Outlook web app (email) are renamed "attachment.ashx", losing their original file names. Why? And how do I fix this?

While the email displays the attachment with the "original file name.xls", when I click and download, it is called "attachment.ashx", and I lose all the original downloaded file names. This started happening about 3 weeks ago after a Firefox update. Suggestions for a fix?

Outlook Web Access sends illegal Content-Disposition headers and this is no longer allowed in Firefox 8. The server needs to be fixed.
See:
* https://support.mozilla.com/en-US/questions/894442
* https://support.mozilla.com/en-US/questions/895024

WVCGA- File names; Audio in 3gp and rtsp..

Similar Messages

Maybe you are looking for