WVRS4400N wireless router - What do i need to configure for VPN software to work?

Hi,
My VPN software can't establish connection ever since i changed to the WVRS4400N router.  What do i need to configure inorder to establish a VPN connection to the outside network?
On a side note, i am not sure if i am on the right track but i read a little bit about setting IPSec Pass-Through.  If this is the case, do i really need to get all the remote connection information inorder for my VPN software to work?  And under Key Management setting, what would my pre-shared key use for (assuming this is a key i generated)?
Better yet, how can i get the vpn software to work with only having access to the internet without going through alot of hassle???
Thanks ahead for any solutions given...

Thank you for responding.
If i am not mistaken, i believe what you are suggesting is setting up a VPN connection to my local area network and use the bundled Quick VPN client software to connect.
I currently have Sentinel VPN software on my laptop and it is configured to have access to my work's network. In most cases, i am able to connect to work without a problem as long as i have internet connection. Apparently, my vpn doesn't work when i am running it behind the WVRS4400N router. This problem didn't occur with my previous router. I believe the WVRS4400N router is blocking the connection by default. What can i do or configure to resolve this?

Similar Messages

  • What do i need to buy for Time Machine to work . i want to backup my mac

    Hi i want to back up my macbook pro and im not sure how to do it. But i know you use time machine. What do i need to buy. Also somthing about airport utility

    I have a 512GB internal and use a 2Tb external for my Time Machine backups. Unless you choose to go with one of Apple's Time Capsules (which I wouldn't) you can get a good drive that has 2-3x your internal disk capacity with multiple ports from a variet of vendors. I have two of these G-Drives from Amazon and love them. One a 1Tb and one a 2tb.
    For everything you ever wanted to know about Time Machine, check out Pondini's FAQs -  http://pondini.org/TM/FAQ.html.
    Good luck - call back with any questions...
    Clinton

  • Does anyone know what driver I need to download for my shuffle to work?

    I posted my problem previously in "My shuffle must have transcended the time-space continuum!"
    In the meantime, I called Apple Care. Great job, very polite and helpful. Thank you Apple!!
    Together the agent and I discovered that my Toshiba laptop does not have the drivers needed in order for the ipod to be recognized. Without said driver, I won't be able to use my ipod at all. She said that even with the article that Apple Support has about Toshiba laptops and ipod, that there are still kinks in it.
    So, my question is this...do any of you people out there who are more computer literate than I am know what I should look for to download? The Apple agent didn't know what specific driver I should look for. If anyone knows, please help!
    In the meantime, I'm going to peruse Toshiba's website and see if I can find anything.

    I had the same suggestion given to me by Apple... I went to my USB card manufacturer website (In my case, VIA Communications) and got some info on their forum.
    The most I can understand right now (although I haven't solved my own iPod problem) is that first, you should try updating drivers by right-clicking everything individually in the Device Manager under the "USB" section, and clicking on "Update Driver." Also, make sure you have Windows Service Pack 2, and try updating all of your drivers by going to http://windowsupdate.microsoft.com/ . The Toshiba website might have a driver update or a patch, also... I'd look around, anyway.
    I updated my drivers (which didn't work), and then I came across a paragraph on VIA's website that says:
    "Through feedback in the forums and hundreds of emails over the years, we know that technical support hot-lines for many peripheral (as in printer/scanner/camera etc) manufacturers, tell their customers to "update the drivers" or "update the controller". ... The controller cannot be updated without updating your motherboard to a motherboard that has a later revision controller. ... This is inbuilt and cannot be updated. The advice you received to update the driver or controller, probably means that they recommend that you update the VIA chipset or platform drivers. ... it may well be that the peripheral USB device you want to install is too new for your motherboard and therefore not compatible."
    Basically, this means that if it doesn't work after the driver update, it may not be a driver issue, but a power issue.
    I've been told (not by Apple) to try buying an external USB hub that plugs into the wall. I haven't yet, but as soon as I do, I'll post whether or not it works, lol. For other people, an internal USB2.0 PCI card worked, but I'm not sure if laptops work with them...
    Hope you (and I, and everyone) get it figured out!

  • If I buy an HP wireless printer, what do I need to do with my Ipad2 to print?

    If I buy an HP wireless printer, what do I need to do with my Ipad2 to print?

    I'm not sure what your question has to do with networking on the AirPort Express, AirPort Extreme, or Time Capsule....but if you buy an AirPrint compatible printer, it will work with the iPad2.
    http://support.apple.com/kb/HT4356
    Suggest that you post in the iPad support area for more details
    iPad

  • I moved from the UK to the US with my iMac. What do I need to buy for the UK iMac to work in the US? A power convertor? A plug convertor? or Both?

    I moved from the UK to the US with my iMac. What do I need to buy for the UK iMac to work in the US? A power convertor? A plug convertor? or Both?  I had previously read that you only need a plug convertor (three prong to two prong).  But I'm terrified that my iMac will blow up if I only use a plug convertor and not some sort of voltage convertor (Transformer).

    I'm not really hardware tech savy - is it easy to pop out the UK power cable and plug in the US power cable? Or do I need to get someone like an iMac support guy to do this? And because of the voltage difference, is there something built into the iMac that takes care of the voltage difference for me?  Thanks!!

  • I'm going to be a freshmen in college soon and don't know what laptop I should buy. What do I need to look for? I will be mainly using it for typing essays, research, and music.

    I'm going to be a freshmen in college soon and don't know what laptop I should buy. What do I need to look for? I will be mainly using it for typing essays, research, and music.

    You should contact the department of studies at the school and ask what types of application that you might have to use.  If there are Windows based ones, then you may have to consider installing Windows in your MBA or get a PC.  This could have an influence on the amount of storage the MBA should have.
    Ciao.

  • To what resolution I need convert movie for Iphone?

    Hi
    To what resolution I need convert movie for Iphone? I have many option and don't know what resolution I need to choose? What is h264? I use joboshare.com software. Thanks.

    Edulinka wrote:
    Cant figure it out how it is working.
    How do you mean? I wonder if the XP version is the same as the Mac version. I think as a default Handbrake will respect the aspect ratio. It's only the quality you need to decide on.

  • If I have more than one Mac, what do I need to do for the apps to be on both machines?

    If I have more than one Mac, what do I need to do for the apps to be on both machines?
    Also, what can be done about an app that doesn't work as promised?

    If you mean iPod/iPad apps then you need to have a replica of your iTunes Library on both machines. You can backup your iTunes library - Back up your iTunes library by copying to an external hard drive - then restore it on the other computer. Also, see iTunes- How to move your music to a new computer.

  • What is the best RAID configuration for a MacPro as a Logic User?

    There ought to be a universal answer to this question: what is the best RAID configuration for Logic Mac Pro users? I will be more specific.
    I use Logic Studio, Reason, Ableton, and Motu Symphonic Instrument simultaneously.
    I want to fail safe my precious audio files and improve performance as the system reads/writes data from multiple files, from audio tracks to digital samples.
    I want to run video files simultaneously to do nifty audio soundtracking to video.
    Here is the configuration I have in mind.
    HD 1: OS and Logic Studio, Reason/Ableton samples etc. software (non-raid) (250 GB)
    HD 2/3: MIrrored RAID set for AUDIO FILES (500 Gb identical pair)
    HD 4: Video files / Bouncing (1 TB)
    Makes sense right? A disk for reading software. A pair of 500 GB disks for reading/writing audio files and sessions in mirrored array. A 1 TB disk for video and bouncing. The main question I have is, for audio files only, is striped or mirrored better? 64K blocks the best? And are there any more details. I assume to do this in Disk Utility.

    Well, both Mirrored and Striped have their pros and cons. If you use mirrored, it will offer no better performance than the spec'ed drive along with it's sata bus speed. The plus point is, if one drive goes down, you have the second as a backup as the complete contents of one drive are mirrored on the other.
    With striped you will get a performance boost because all files (for example a single project) will get written across both drives and hence split the load on the drives and the SATA busses. The drawback is that you'll have to make sure you have a good, regular backup schedule in place because when one of the drives goes to drive heaven, you're going to be stuffed without a full backup of both drives.
    Exactly what performance boost you'd get will depend on your project, number of files, size of files, fragmentation of files, track count etc. You may find it would be easier to use the 3 drives straight, with no raid and have:
    HD 1: OS and Apps. No samples at all.
    HD2: Audio Files for Logic projects
    HD3: Reason, Ableton, Logic etc instrument sample library
    HD4: Video and bouncing.
    Which is what I ended up doing although I use HD4 as an interchangeable backup for HD1 and 2.
    There is no universal answer to this as each must make their own choice based on their preferences and needs. Mirrored will give you full backup but on-site, in machine backup. Not much good if something untoward and drastic happens to the physical machine. I think a few people toy with striped RAID but fall on the side of using the drives straight, as in their projects they don't see a big enough gain over splitting the data across your 3 remaining drives without RAID. Studios that seriously consider raid often go out and get a dedicated raid that can offer more variations than raid 0 or raid 1 (Striped and Mirrored) and better throughput.
    I hope this helps a little and not just added to the dilemma.

  • What is the difference between, Configuration Components and Software Comp?

    Experts,
    Can somebody tell me, What is the difference between, Configuration Components and Software Components?

    Hi,
    Configuration Objects:
    You use configuration objects to help you to structure and organize your configuration data in the Integration Directory
    You can group configuration objects by using configuration scenarios.
    The following configuration objects exist:
    1) Collaboration profile objects
        -Communication Party
       -Service
       -Communication Channel
    2)  Logical routing objects
      - Receiver determination
      - Interface determination
    3)  Collaboration agreement objects
       -   Sender Agreement
       -  Receiver Agreement
    Refer the below help which I did search on SDN:
    http://help.sap.com/saphelp_nw04/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm
    Softweare component:
    http://help.sap.com/saphelp_nw04/helpdata/en/12/003479fa4c2d4aa9d175dcbb081d66/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/37/ae463c75a8477ee10000000a114084/frameset.htm
    Thnx
    Chirag

  • What is the standard component configuration for tuition fee reimbursement   in sap webdynpro?

    what is the standard component configuration for tuition fee reimbursement  in advance claims  in hrms in webdynpro?

    Hi Debo,
    What is your exact requirement?
    Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
    sample:
    Regards,
    Rama

  • HT1331 I just bought a airport wireless router I have a time warner cable modem. I have hook up the modem correctly to my new apple airport router and my modem is not working with the apple airport router. what do i need to do?

    I just bought a airport wireless route and I have a time warner modem. My problem is my modem is not connecting to my apple airport router. What do I need to do?

    Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
    Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

  • Wireless printing - what do I need?

    I am thinking of buying a Canon Pixma 5200R printer which according to the description prints wirelessly. I intend to plug the printer in over the otherside of the room to my Mac. I have an airport extream card in the mac. Do I need any other equipment to print wirelessly?

    I am thinking of buying a Canon Pixma 5200R printer
    which according to the description prints wirelessly.
    I intend to plug the printer in over the otherside of
    the room to my Mac. I have an airport extream card in
    the mac. Do I need any other equipment to print
    wirelessly?
    You will need a wireless router, the 5300r will not work in ad-hoc mode and you need a wireless router to work in infrastructure mode.
    iFelix

  • Wireless internet--what do i need?

    I just bought a 14 inch iBook g4. It says it has built in AirPort extreme. But I have no idea how to use it, really, and can't find an explanation anywhere. Do I need to buy a base station? All I have is the computer. What do I need in order to connect to the internet at a local coffee shop, which has free Wi-Fi? Do I need any extra equipment? Do I have to fill in information about service providers and things? Also, what if I want wireless in my home, which obviously does not have free WiFi? What do I need to do then? Maybe this has already been asked, but I have searched and there is no clear how-to about how I get this set up. Please help!

    Hi The_Emmasaurus,
    Welcome to Apple Disucussions
    Here are your options:
    1)Go to a coffee shop (Starbucks) and pay for internet service from there.
    2)You can buy an Airport Base Station (Airport Express/ http://www.apple.com/airportextremeAirport Extreme). They will both work with your card
    a. You will need a service provider. Comcast, MSN, Earth Link, etc. EarthLink and Apple have a pretty good package. You should get your local phonebook and look for service providers.
    b. Follow directions on Airport Base Station/Service provider and your done
    I hope that helps,
    Jon

  • HT1688 I recently upgrade my Iphone but the old one is still active. I installed the friendjectory app on my new phone but it will not open but for a few seconds ab=nd then closes. What is wrong and what do I need to do to make this app work on my new pho

    I recently upgraded my Iphone. Iinstalled the friendjectory app on the new phone but it will not open but for  few seconds and then closed. What is wrong and what do I need to do? My old phone is still active and working. Do I need to do something about that?

    Hi stanczak53,
    Welcome to Apple Support Communities.
    See this link for some tips on troubleshooting apps on your iPhone:
    Using apps on your iPhone
    http://www.apple.com/support/iphone/assistant/application/
    Best,
    Jeremy

Maybe you are looking for