WW3 warning explanation needed
This page
http://www.spinsister.nl/slideshow/slideshow.php
validates with one warning "line 45 column 15 - Warning:
<object> anchor
"slideshow" already defined".
I cannot fined another 'anchor' defined.
I used to have the "old-fashioned" embedded object there, but
changed it
on DW 8.0.2's prompt. Has that perhaps caused the problem?
Regards,
Adriana.
[ put out the rubbish if you need to reach me by e-mail ]
www.spinsister.nl
How about another <object>?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"A.Translator" <[email protected]> wrote in
message
news:[email protected]..
> This page
http://www.spinsister.nl/slideshow/slideshow.php
> validates with one warning "line 45 column 15 - Warning:
<object> anchor
> "slideshow" already defined".
>
> I cannot fined another 'anchor' defined.
>
> I used to have the "old-fashioned" embedded object
there, but changed it
> on DW 8.0.2's prompt. Has that perhaps caused the
problem?
>
> --
> Regards,
> Adriana.
> [ put out the rubbish if you need to reach me by e-mail
> www.spinsister.nl
>
>
Similar Messages
-
When I try to play certain games on pogo, I get this: Oops, something is not right...
Flash Plug-In Warning
Explanation:
You do not have the Flash player installed on your browser.
How to Fix the Problem:
This game requires the Flash plug-in.
Download the latest Flash player now.
So I download latest still get error messageIt is best to go to the source, Adobe, to get their software and updates. Sometimes malware can infect sites with messages that appear legitimate, but will, instead, install malware/virus/trojan on your system. Read the following carefully to install and/or update Adobe Flash.
There are 2 versions of Adobe Flash; an '''ActiveX version''' for IE only and a '''Plugin version''' for most other browsers including Firefox. On a Windows system, you should always update both individually. '''''You do not have Adobe Flash (aka "Shockwave Flash" in Add-ons > Plugins) installed.'''''
#'''Using Firefox''', go to the following direct download link and SAVE the download to your desktop so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#Direct link ActiveX version for IE '''''only''''': http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
Help/explanation needed - Using an external hard drive
Hi everyone,
I bought an external 250gb hard drive as my MBP was very close to full capacity. Yesterday, I had a bit of a scare...
1. I backed up my Aperture Library onto the external hard drive.
2. I had about 500 of my favourite images rated 5 star and so I selected these and set up a new project.
3. I went through my Aperture library deleting folders/projects that I have completed.
4. I went back into the 5 star ratings and they did not exist. I assume this is because I deleted the master files.
5. I wanted to have the 5 star images on my laptop and so I connected my external hard drive once again. [This is where I felt I lost control and understanding of what was going on].
6. I looked for the seperate Aperture files but could only find a file called Aperture Library. I clicked on this but nothing happened at all [I had thought that it would open up Aperture with the previous library].
7. I dragged the library onto my desktop and waiting for all the images to reload onto my laptop. I then saw that everything was as it was previously, i.e. all the files and images existed. However, my hard drive space was even lower [I assume this was because the current workflow that I had left on the laptop was now duplicated?].
8. Then I got a message saying my iDisk space is critically low and may damage my Aperture library. Moments later the majority of my images disappeared and a red space appeared where every photo had previously been. Since I have 2 weddings that I am yet to deliver I was very panicked. I tried to drag and drop the Aperture library once again and the message came back that the operation could not be completed due to the current file already existing.
9. I unplugged the external hard drive and the photos re-appeared [much to my delight]. However, my concern is that I really don't understand what happened and more importantly why. I will need access to the data on the external hard drive in the event in the near future and am worried that the same thing will happen next time I connect it.
As a result of all this I have some questions, as follows:-
- Have I adopted the completely wrong approach to backing up data?
- Can the master files be compressed as I shoot RAW and these are huge files?
- Why could I not use the Aperture library stored on the external hard drive without downloading it back onto the laptop?
and a more general question about file storage...
- I am confused as to how much hard drive space is being used on my MBP. I have 13gb in Aperture, 1gb in iTunes and 1gb in iPhoto. However, I only have 50gb available, so half the capacity is currently being used. I know that Aperture and Garageband applications use about 10gb between them and there is of course the operating system, but 50gb in total seems a lot. On investigation in the finder screen I see that on my personal drive the Aperture, iTunes and iPhoto data is stored there. However, it is also stored under pictures and music respectively. Does this mean that it is storing duplicate copies of this data and that is the explanation for such high hard drive usage? If this is the case, can one be removed?
I appreciate that this has been a long email, but I felt it was important to illustrate the steps I have taken. As you will no doubt glean from this post I am not the most computer literate person. Any help/explanation would be most appreciated.
Many thanks,
JamieHi Jamie.
I am not sure what went wrong with your setup but I will let you know my configuration as an example and you can decide if you think it is a good way to have it. I am asuming you are using ver 1.5?
Like you I have only a Laptop (G4 17" 1.5Ghz 2 Gig Ram - would love a macbook) so hard disk space is a premium. I also have an external firewire drive to hold all the HiRes RAW images. When I download my images from the Camera I do it manually into folders on the external drive (Cataloged by Date and maybe description of location). I then Import the images from those folders into Aperture but use the option when importing to "Store Files - In their current location".
My Aperture library file is on my laptop so all that it has to store is the "Preview" file that gets generated automatically (in the preferences I have it set up to the resolution of my laptop 1440pix so that if I did a slide show it is only as big as my screen - anything more is a waste of disk space IMO.)
I do it this way so that it is easy to find and work on my files with other programs such as Photoshop by going straight to the image rather than exporting from Aperture.
Obviously I cant edit the RAW files while the drive is disconnected but I can still do ratings and keywords without the original files being there.
I hope this helps.
Regards
Andrew
G4 17inch Mac OS X (10.4.8) 2 Gigs RAM -
Java EE 5 Tutorials Examples...Explanation Needed
Hello There
Iam Reading Sun Java EE 5 Tutorials For JSP
And I've Reached The Lesson:The Example JSP Pages
But When I Got To The Code,I Couldn't Understand Anything?
Is There's A Further Explanation For The Code,Or It Depends On Earlier Lessons?
Or How Could I Understand It?
Someting Like That?
bookstore.jsp
<p><b><fmt:message key="What"/></b></p>
<jsp:useBean id="bookDB" class="com.sun.bookstore2.database.BookDB" scope="page" >
<jsp:setProperty name="bookDB" property="database" value="${bookDBAO}" />
</jsp:useBean>
<jsp:setProperty name="bookDB" property="bookId" value="203" />
<p>
<c:url var="url" value="/books/bookdetails" />
<blockquote><p><em><a href="${url}?bookId=203">${bookDB.book.title}</a></em>,
<c:url var="url" value="/books/bookcatalog" />
<fmt:message key="Talk"/></blockquote>
<p><b><a href="${url}?Add="><fmt:message key="Start"/></a></b>BalusC wrote:
It's hard to understand you since you start every word with an uppercase. Where have you learnt writing English that way? This childish way of writing is fairly annoying to read and it is likely to generate less response at the public forums.I thought he needed help on jsp example rather than on his poor english :P -
Warning: Comp needed but no BD
Hi, Everyone:
When I go to look at a property of a node (for example the VISA Write, but it could any one of the built-in functions), it will keep returning an error (see the attached picture) until it runs out of hard drives to check, then it finally opens the proerties dialog. Upon closing LabVIEW, I get the above error (details in the txt file). I guess it's trying to compile a locked library (locked for a good reason - it's part of the LabVIEW install). It just started happening, but I cannot recall an event that may have started the whole thing off...
Anyone have any ideas?
Thanks!
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Attachments:
lvlog.txt 4 KB
property access warning.png 30 KBYou can start LabVIEW from scratch, then make a new VI. Drop anything on it (like the "add" function, for instance). Open its properties and it happens. First, it tries all my removable drive letters, then it finally gives up. That is the time I think I get my first "Comp needed" error in the log. After that, it's smart enough to know that there is nothing in the drives but it silently accumulates the same error every time I try to open a property on a LabVIEW-provided function. It also seems to happen when I try to open the properties of a typedef.
It thinks it needs to recompile the library, but since the BDs are removed, it cannot recompile. The thing is, the library can't be modified, so why would it think it was? Again, thinking it might be a corrupt library, I did a repair on the LabVIEW install to no effect.
The LabVIEW info is contained in the log.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Number Range Buffering - Detailed Explanation needed!!!
Hi GURU's,
Could someone please explain me what does it mean by Number Range Buffering and where we use it and how we use it.
Wouls definitely assign points for the detailed explanation. Thanks in advance.Hai ,
The number range buffer is used to increase performance when assigning
numbers. Instead of fetching the numbers each time from the database,
a single access to the buffer suffices. Only when the buffer is empty,
is it refilled from the database (table NRIV).
Use of the buffer has the following benefits:
· Accessing the main memory is a thousand times quicker than accessing
the database. Speed is particularly important for applications that
assign numbers frequently.
· Database accesses are always subject to the database transaction
mechanism. Once an application has assigned a number for one user, a
second user cannot assign a number until the first user has executed a
commit operation on the database. The application blocks further
assignment, and the second user has to wait, until the commit has been
executed.
· The number range buffer can also prevent deadlock situations, which
may arise from assigning different numbers in a different order.
Since the SAP kernel accesses table NRIV directly for the number range
buffer, the structure of the table must never be changed. This also
applies when adding new fields.
We can set number range buffering inSNRO t code.
Loading Master data - The number ranges buffer for the SID's resides
on the application server and reduces DB server accesses. If you set
e.g. the number range buffer for one InfoObject to 500, the system
will keep 500 sequential numbers in the memory and need not access the
database.
Hope this helps.
asing points if helpfull
regards
Kp -
PORT FORWARDING Step by step explanation needed
I need a very easy to follow step-by-step explanation as I can't seem to work this out.
I have broadband with a static IP address, it comes through my ethernet modem (D-Link ADSL Modem DSL-300T) this is connected to my Airport BaseStation (one with the modem port).
I have three computers connected wirelessly, one desktop, and two laptops that are frequently out of the office.
I want to set up my network so that I can use Apple Remote Desktop and FTP. I understand I need to open some ports on the basestation, but don't know exactly how or what ones. Also, do I need to set the macs up with DCHP with a manual address, or can I leave it at just DCHP?
Any help would be greatly appreciated.Port Forwarding on an apple base station comes under the 'Port Mapping' section of the airport admin setup.
I found a howto that could help you .
http://www.roadstead.com/weblog/Tutorials/airport.html -
Hi all,
I'm new for all the adobe application development.
I don't realy underestend if I can create some PDF documents with the InDesine Script without to open the InDesign tool.
Can youi please explain me how to do this? and if it not posible do you know with wich tool can I do this thing?
Thanks
YaelHi Yael,
I need some explanation of your question, too.
Do you want to 'convert' InDesign-documents to PDF-files without opening InDesign?
That is not possible.
Do you want to export PDF-files out of opened (or closed - to be opened) InDesign-documents with InDesign-application opened but without any dialog?
That is possible.
What do you mean with 'the InDesign tool'?
Do you mean the application InDesign or the dialog to export PDF-format out of a document?
Martin -
SLIN warning message need to rectify
Hi All,
TRY.
CREATE OBJECT LR_0014
EXPORTING
TCLAS = 'A'
INFTY = '0014'.
CATCH CX_HRPA_VIOLATED_ASSERTION .
ENDTRY.
for this code in SLIN it is showing warning message as
No Exception Handling After the CATCH Statement
Please suggest the Solution.Hi Kumar,
check this link:
Re: Extended program check error for cl_salv_table=>factory
Regards,
Swarna Munukoti. -
Permissions Repair Warning Explanation Please
Hello Everyone,
It's been a while since I last posted on the Apple forums.
I just installed the Mac OSX 10.6.3 v1.1 Combo Update.
After doing so, I launched Disk Utility and ran "Repair Permissions".
At the very end of the permissions repair log, I found the following warning:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Does anyone know what this means, or why it cannot be repaired?
If ARDAgent means Apple Remote Desktop Agent, as I suspect, then I am mystified, because, to my knowledge, I never use Apple Remote Desktop for anything, unless it is possibly used during the Software Update process without my knowledge.
I just want to know who has modified it, and why its permissions can't be repaired.
My computer specs are in my sig below.
Thanks!Hello Niel. Thanks for your response. I just did some checking, and it appears that Mac users have been reporting this -- and similar messages by Disk Utility -- since at least three years ago when Leopard was first introduced.
In fact, I found a page here on the Apple site called "Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore".
It can be accessed at the following URL:
http://support.apple.com/kb/TS1448?viewlocale=en_US
So I suppose that, as you have stated, the message can be ignored. -
Explanation needed for Join rules
I try to configure the join Engine for some days now, andf probably I got something completly wrong... Here is what I try:
I have a "Participating View" (which is a NT Connector View) and a Meta View. When I enable the NT Connector View for the join engine, all entries flow from NT Connector View to the Meta View.
But when I change something in Meta View, it does not flow to the Connector View. I don't understand why.
Settings in Participant View are:
Attribute flow:
to connector atomic
to meta view: atomic
joinrules:
to conn: atomic
to mv: "testruleset"
DN mapping rules:
to conn: atomic
to mv: atomic
filters:
to conn: none
to mv: none
entry default ownership:
to conn: Meta View
to mv: Connector View
entry default membership:
To connector: Not a member of CV
to mv: Member of CV
"testRuleset" has one join rule:
1. Optional Token Assignments: <none>
Selection Criteria: <none>
givenname=%givenname%
As I understood the documentation, this rule should join entries, which have the same givenname.
So if I have two entries:
in MV:
dn: uid=test1,o=company
givenname: jack
sn: smith
uid: test1
telephonenumber: 123
and in CV:
dn: uid=test2,o=company
givenname: jack
sn: smith
uid: test2
mail: [email protected]
This rule should (as I read the documentation) join both entries in the MV to one entry containing a mail address an a telephone number, but it does not.
Could anyone correct tell me what part I got wrong or post a working example?
Thanks!
FlorianHi, if you've just one Connector View (CV) and you want to synchronise entries from the CV to the MetaView (MV) then you need a "DN Mapping Rule". It's the purpose of the DNMappingRule to create the new DistinguishedName and entry in the target view. You do not have a DNMappingRule setup typically the rule would be something like uid=%uid% assuming uid is the RDN.
No not use Atomic where possible it's best practise to apply more control over the flow of attributes using an Attribute Flow Rule.
You don't need a Join Rule if there's only one datasource (ConnectorView) , the Join Rule is used to join entries that are split across multiple Data Sources say perhaps in Oracle and Directory Server.
Hope this helps,
Paul -
Confused on Sync, Explanations Needed
Hi. On iTunes you have the option to prevent iPhones, iPad from syncing automatically (in the preferences), then you have that in the App tab when you click your iOS device on the left, in there you can click or unclick automatically sync apps which is clicked by default (wouldn't this contradict with the preference settings that you don't want it to sync automatically?) If you click in the preferences for the iPhone and iPad not to sync automatically shouldn't it unclick the one on the App tabs sync apps automatically?
Then there's apply revert button, if you apply it syncs (with the syncing in progress written on the iPhone) and then just the sync button appears but if you move from your iOS device to say the iTunes Store, it'll tell you that you have changed the settings on your iOS device which I don't believe I have because everything was being click on the iTunes. You then click ok then it syncs again (it just did before that when you click the Apply button the one at the bottom of Revert). I think sync still needs that much needed overhaul.
What settings should I click or unclick if I want to download app using the iTunes App Store, after it's downloaded I go to the iOS device in this case an iPhone 3G and the newly downloaded apps should be unchecked at the App tab section. I pick some of the newly downloaded apps check it and then I sync it. If possible I don't want the Revert and Apply buttons to appear, just the sync button to make the UI simpler. Then if I downloaded it using the iOS device like the iPhone could it just remind me that I have new apps and I may opt to back it up to the Mac using iTunes? I then pick which apps from the iPhone (it could also be other things like new contact numbers) I want iTunes to back up (coz' suppoing I'm out of time and some apps are big, I could just back up the smaller apps).
Thank you in advance.
Gbu.May be easier to put your iTunes on an external HD and carry that back & forth.
-
TelePresence endpoints - call rate explanation needed
Hi,
I'm fairly new to TelePresence endpoints and I need some clarification regarding the call rate between endpoints.
I have a CUCM 10.5 with MX300 G2 endpoints registered and by default the call rate in all endpoints is 6000 kbps when placing a call. This will result in error when A calls B which has audio and video both ways but when A invites C for a conference there's only audio between A and C because all available bandwidth (6000 kbps.) was used between A and B.
The immediate solution is to reduce the call rate in the endpoint configuration to something lower say 1920 kbps. However if the endpoints is restarted or unregistered from the CUCM the call rate reverts back to 6000 kbps. I've tinkered with the location bandwidth settings in the CUCM but that doesn't appear what to have an influence on the call rate settings in the endpoints.
How do I permanently change the default call rate in the endpoints so it's remembered even when the endpoints are restarted or reregistered?
Thank you and have a nice day.
/Carsten"How do I permanently change the default call rate in the endpoints so it's remembered even when the endpoints are restarted or reregistered?"
Specify the rate in the codec itself which is found at
Configuration/System Configuration/Conference/DefaultCall\Rate
/jens
Please rate replies and mark question(s) as "answered" if applicable. -
Interdigit timeout , explanation needed.
Would you please clarify ,if I should wait for interdigit timeout to complete when scheme below is programmed :
phone dials 92517295 ->
translation pattern 9.XXXXXXX / predot , prefix +201 , urgent priority -> route pattern \+! -> gateway.
I attached configuration screenshots along with trace.
I would greatly appreciate explanations.the explanation for interdigit timeout in reference to call manager,
In order to allow sufficient time for a user to dial a telephone number, Cisco CallManager relies on a timer referred to as the interdigit timeout. This parameter indicates the duration Cisco CallManager waits after each digit is entered before it assumes the user has finished entering digits.
I went through the traces and see that call hitting the route pattern you created
Thanks!
if you think you are waiting long for the call to go through, then you can reduce this timer as well -
Friends,
I need to understand CIN, from the start. My domain is not FICO and therefore dont understand CIN in domain too. It would great if you can point the link of document explaining CIN.
Thanks,
AHi,
Some of the links
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/cin%2bconfiguration
http://help.sap.com/saphelp_47x200/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/40/a23c39129ffe2ee10000000a114084/frameset.htm
http://sap-img.com/sd009.htm
SKS
Maybe you are looking for
-
I just lost all my contacts on the ipod2 ...how do I get them back? They just disappeared while I was typing in a new contact. Help!!
-
How to know if a file has been updated in iCloud after modification?
How to know if a file has been updated in iCloud after modification? I work on various app including Keynote on my Mac Pro. And after modification, i close file and I wait. When I see no more Internet traffic. I assume that keynote has uploaded all t
-
Ipod Touch USB Connection.
How do I stop the Ipod Touch from showing up as a drive, when connecting to a Windows Laptop? In the early days of use, the Ipod did not show as a drive when connecting up to sync. There was something I changed in the settings, and now I can't find h
-
i read all the no sound but mine is a little different i only have sound for video only any help?
-
Trouble with trigger generation when replicating FAGLFLEXA
I am trying to replicate the FAGLFLEXA table, which is a fairly large table using SLT. I have not defined any specific filters and am just trying simple as-is replication. I have however partitioned the target table on the HANA side to help speed up