WWI report Symbols

Hi Gurus
I am in the process of creating new template for Incident Management. In incident management we have Root Cause hierarchy. In our system we dont have standard symbols for root cause hierarchy. Any idea what are the symbols we need to use for popuating the RC hierarchy values in the report?
Standard table for RC hierarchy is CCIHT_RC.
TIA
Regards
Murali

Hello Murali,
As far as my knowledge goes, there is no standard SAP way to include cause heirarchy nodes as symbols in the report template.
My suggestion here would be to write the summary of the root cause analysis in "Investigation result". This field you can very well capture in the template with symbol "EAI_IVRSLT INVRESULT".
Regards,
Pavan
Edited by: PAVAN TRIPATHI on Feb 22, 2010 2:51 PM

Similar Messages

IMG: Check & Specify Report Symbol

HI Experts,
In the IMG activity, "Check & Specify Report Symbol", under "report symbol type" these fields are listed,
Phrase
Specification
Parameter
Descriptor
Standard Repeating Group
Special Repeating Group
Blank Compression Group
Optimized Repeating Group
IF Repeating Group
Template
Version Information
Language Information
Language Switch
Generation Date
Control Command
Comments
Out of these, we know few symbol type like 2.Specification,3.Parameter,.........
But what about the other Report Symbol Types ? How they can be used & Where..?
Regarding, 16.Comments: Can this symbol type can be used to fulfill the purpose asked here,http://scn.sap.com/thread/3334515 ?
Thanks & Regards
Subash Sankar

Dear Subash
I checked this topic again. I have some interesting information. Later on I am planning to prepare a new document. Therefore: thanks for asking the question; it was very interesting to find some answers and to drill down in WWI process (which is quite complex).
Ok: The values you have mentioned are part of a domain in SAP (check report symbol table of EHS using transaction se11). If you generate a "where used list" you will find some Includes. One is related to "Constants" and in one other the "Constants" are used (here in a Form routine)
Therefore comming back to your list:
Phrase
Specification
Parameter
Descriptor
Standard Repeating Group
Special Repeating Group
Blank Compression Group
Optimized Repeating Group
IF Repeating Group
Template
Version Information
Language Information
Language Switch
Generation Date
Control Command
Comments
Any of these report types does have a "linked" value. Now it is interesting to detect that this value is used as "part" of the report symbol. You can check this by investigating table "ESTLS".
Example: if you check SAP online help regarding e.g."Repeating group" and an example you find this one:
<11BRG001(M,SAP_EHS_1015_003;1-3)>
<01G1015003AD(P;1)>
<11ERG001>
Now the value "11" is the value as part if the domain relating to "Standard Repeating Group".
The topic is explained a littel bit here:
http://help.sap.com/erp2005_ehp_06/helpdata/en/a7/2874e50a6c11d28a220000e829fbbd/content.htm?frameset=/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Chapter "Editing Descriptor Symbols"
http://help.sap.com/erp2005_ehp_06/helpdata/en/6a/8ef2639f214475aebe63d8c6c6ae3c/content.htm
shows an example of thge "IF" type like:<15BIF006(AND:01EHS_ICREPV NE "NON")>
Therefore the value of "IF Repeating Group" = 15 (refer to content of the domain)
If you check the entries of ESTLS you can detect which report does have which report symbol and report symbol type and you can therefore detect which report symbol types are used and which are not.
Actually the type:
Comments
is not supported by SAP (therefore If my debug result is correct: even if you try to generate a report symbol with "link" tothis value; you wil not recieve a result). But in a parallel thread this topic has been discussed. So we can hope/assume that may be SAP will deliver something.
I am sorry to say that I will take some time to "drill" deeper. But if I am finished I plan to share the result.
C.B.
PS: The "value" for "Template" = 20 => if you check ESTLS, WWI etc. This value is used to "include" a WWI layout within a WWI layout; check e.g.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4b/c5874174a8050de10000000a1550b0/content.htm?frameset=/en/a7/2871f60a6c11d28a220000e829fbbd/frameset.htm
and then chapter: Inclusion of Document Templates:value: <20INCLUDE("Test",01,SBV)>

Error message when checking WWI report template document in CG42.

Hi Gurus.
I'm facing troubles to check MSDS report template document after upgrading the version 4.7 to ECC 6.0. When I try to Check the template I receive many msgs warnings like shown below:
For Example One type of template warninfg from report document:
Template Texts: (From the UNDERLINED LINE i am getting the warnings)
<01G1023001RP(C;1)>:<01G1023001RP(P;1)>:
<13BNG034(+0101G1023001RP(C;2-),01G1023001RP(P;2-)>
<11BRG023(D;2-*)>
<01G1023001RP(C;2-)>:<01G1023001RP(P;2-)>:
<11ERG023>
WARNINGS from above template symbols:
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
*Similar type of other warnings:*
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM1: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM2: Range to be overwritten by that of discrete repeating group
Symbol ZSUPSTR: Range to be overwritten by that of discrete repeating group
Symbol ZSUPCTY: Range to be overwritten by that of discrete repeating group
I realy don't know what is going on. Before in SAP 4.7 version When i check the template document i didnt receive any warnings like i listed above but i am receiving now. For your reference I am using the same WWI report template in ECC 6.0 also.
Can anyone help me?
Thanks in advance.
Edited by: sunil29 on Aug 1, 2011 3:26 PM

See note 920317. That warning won't affect the result based on this example. You are using (2-*) on both the Discrete repeating group and the symbol itself. In your new system, the area you use discrete repeating group overrides the area on the symbol. The note gives some examples.

Creating simple WWI report

Hello All,
Can someone kindly write down very basic steps by which I can create a simple WWI report by extracting some field values from Property tree of specification.
Thanks in advance,
Sachin

Hello Sachin
to my knowlegde WWI is integrated in most of the EH&S submodules. The SAP standard can be used to generate a high number of report symbols which are connected to the different submodules and the SAP EH&S set up can be used to generate if necessary very easily customer specific symbols.
Further on WWI as a "printing" technique etc. has grown a lot in the recent years. Here I can give only a small summary:
With the recent releases of SAP EH&S you can use e.g. a "report template" in a "report template" which is a good starting point in my opinion to handle better the WWI topic. Further on SAP has increased the possibilites in using so called "place holder phrases". One is linked to a "old" relase (related majnly to DG management topics) and a new one which has been prepared recently.
It is a good idea to do a small inquiry in SAP marketplace to find the corrresponding OSS.
As Recipe Management uses in the background to my knowlegde the EH&S indicates that you can use WWI to derive data using WWI from Recipe Management too (Sorry: I have too no experience here).
If you perform an inquiry in SDN you will find a high number of entries regarding "Recipe Management" and in some of them I have seen that similar questions have been asked and answered (how to derive data using WWI). Now coming back to what Niraj said:
If you take a look in cg54 and cg50 you will see a number of "report applications".
Therefore the WWI technique to my knowlegde can now be used in really any EH&S submodule you can think about.
WWI is normally used to generate MSDS, SOP, Lables etc. but can be used ot my knowlege in EH&S IH and OH as well to "print" data in a report.
MSDS and Lables are "special" from my point of view because of SAP history. The reason is simple. The generation of especially a MSDS or a lable will drive most of your EH&S acitvities in most companyies. Further on SOPs (Standad operating measuress) are used often and in the past in europe tremcards. The generation of a MSDS or a SOP was one of the first major topics which SAP solved with EH&S. Later on (i believe with SAp enterprise Extenstion 2.0) GLM has been introduced
What is really important is to understand the link between the "substance generation variant" the "report template" and the "report application".
Personally I would suggest that you try to "print" e.g. an identifier as the first step to get expericene in using WWI. From the "technical point of view" such a report layout and generation variant etc. can be created within not more than 2 hours if you have a basic idea of WWI.
With best regards
C.B.
Shipped with EH&S there is are some "default WWI" layout (which can be found in the corresponding folder in the WWI on your client).
Edited by: Christoph Bergemann on Jun 3, 2010 9:38 AM
Edited by: Christoph Bergemann on Jun 3, 2010 9:40 AM
Edited by: Christoph Bergemann on Jun 3, 2010 9:40 AM
Edited by: Christoph Bergemann on Jun 3, 2010 9:41 AM

No Reporting Symbol for the cube.

Hi all,
no reporting symbol for an cube.
I created Z cube without any aggregates and loaded data sucessfuly QM status is green but i'm not able to see the reporting symbol next the request id. When i checked in manage content data, data is available for the fact but not for any dimension table.
Please go through the following when we did the diagnosis.
Diagnosis
    There is an inconsistency between the load status of the data and the
    option of reporting on this data.
    There is data in the InfoProvider that is OK from a quality point of
    view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000003343, number
    REQU_44ROL5YBBCJMDL5HQ8TVBAER6.
Procedure
    Choose Refresh to remove the inconsistency.
As per the procedure we did but went to short dump
UNCAUGHT_EXCEPTION
CX_SDB_ORA_PROGRAM_ERROR
Highly appreciable if any one could resolve our issues.
Thanks in Advance.

Hi Niyati,
What is your BW version. If it is BI 7.0 then check these OSS Notes:
975948 No update statistics for newly created tables
998904 Statistics check shows red or yellow traffic lights
If it BW 3.X version then run the RSRV check for the cube.
Bye
Dinesh

What is Report Symbols?

Hi friends,
what is Report Symbols in EHS module?
Please help me...

SAP help provides this info:
http://help.sap.com/saphelp_47x200/helpdata/en/a7/2872920a6c11d28a220000e829fbbd/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/b3/75a580b0b411d5993800508b6b8b11/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a7/287aa60a6c11d28a220000e829fbbd/frameset.htm
Hope this helps.
Sudha
Message was edited by: Sudha Mohan

Generating WWI Report in Background by JOB in SM36

Hello,
I have got a requirement to generate WWI report for specification and save it to Desktop using Program which will be scheduled in Background.
I have found some Standard Function module (C12H_WWI_DISPLAY_DIRECT) which generates and displays the report in foreground. When I use that FM in program and schedule that program in Background , it is not generating any report for specification.
Please anyone has any suggestion of how to generate WWI report for specification in background.
Thanks ,
Sujit

Dear Sujit
topic has been discussed very often in EHS FORUm. As reference: Bulk MSDS Download
C.B.
PS: according to my knowlegde: C12H_WWI_DISPLAY_DIRECT is used to get a WWI report for "client"; the document is not stored in SAP DMS etc.; therefore: this is no "real" report. EHS knows a functionality to show onclient level (SAP GUI) the WWI report. But the content is not "verified" by an expert.
In any case may be these threads might be of interest:
Invoke WWI from WebDynpro Application
RFC to display MSDS reports
Problem while generating the WWI Reports from Portal

WWI report - getting generated report fields values

Anyone know which function module decomposes the fields values of a WWI report in preparation for printing. These values are stored in an internal table and used by print FM CVEA_RSDOS_CREATE_BY_EHS

Form L_VARIANTS_PRINT or L_REPORTS_PRINT in FG C1G2

How to DOWNLOAD WWI reports(EH&S, Product Safety, Reports) to a local file

Hi All
Could you please help me out for the below requirement:
How to DOWNLOAD WWI reports(EH&S, Product Safety, Reports) to a local file or server. The purpose of this requirement is to download all the WWI reports(Specification) of each and every Specification type to a local server. Please help me out with your valuable suggestions.
Thanks,
Venkat

Hi Arvind,
Thanks for your reply, could you please provide me more information(Transaction..etc..,) for the process to download reports as you mentioned.
Thanks,
Venkat

How to get report symbol in cube

Hi Experts,
In one of my cube not showing report symbol (only for new request) so how to get the report symbol.
Regards,
Siva

Hi there,
Do you see the status of the request as green (green icon)?
If so, but still don't see the report symbol, that's because you probably have aggregates in that InfoCube that you haven't done the roll up.
Therefore, go to the tab Rollup and in the request ID make sure you have that last request (you can click F4 and choose it) after that click on execute. You'll have to wait the roll up is finished (can control it under transaction sm37) and afterwords your request will be ready for reporting.
Diogo.

New parameter report symbol configuration

What is the end to end process of creating new report symbol .Do I have to create separate function module and assign in the configuration .

Hello M D,
1. You would need to configure a symbol group and assign function modules to it, if no suitable existing symbol group available.
There are two function modules assigned to each symbol group:
The first function module is used for symbol expansion. Use function module 'C12O_PARAMETER_VALUES_SELECT' for symbol expansion.
The second function module is used for default parameter determination of symbol groups. You can copy the existing function module for determining default parameter values for any standard symbol groups and change the copied function module according to your requirement to fill the values for parameter symbol.
2. Then, you configure a new parameter symbol and assign it to the symbol group.
3. Add the parameter symbol in the report template.
4. Development to be done in the function module for determining default parameter values, assigned to the symbol group, to populate the value for the parameter symbol based on your requirement.
Thanks and Regards,
Kannan Veerapandian.

Printing WWI reports for an Accident using tcode CBIH102

I have to write a RFC to print a wwi report for an accident. I've identified FM CVEA_RDOS_CREATE_BY_EHS as the function module that will trigger the printing.
FM CVEA_RDOS_CREATE_BY_EHS contains a table parameter X_DDO_TAB_TYPE which contains the table fields values, class characteristics values for values fields specified in WWI template and will be used by the WWI generation server to create the report.
I'm trying to identify the function module that extracts the contents of table parameter X_DDO_TAB_TYPE from the WWI template..
If any info is available that would save me a lot of debugging time.

Form L_VARIANTS_PRINT or L_REPORTS_PRINT in FG C1G2

Diplay multiple Graphic Phrases within WWI report (EHS)

Hi,
To generate mutliple graphic phrases within a WWI report, it requires to use the repaeting group type - Descrete Expansion of Multiple Values - (within Edit Report), which results in the following coding:
<11BRG048(M,Z_SAFETY_CARD_8008;*)>
<11BRG051(D;*)>
code within text box----
<01GZSC_ZSC81(G)[SZ:A;D:APersonal Protection]>
-code within text box--
<11BRG051>
<11BRG048>
The result is the diplay of only one graphic (multple phrase graphics are assigned the specification workbench) in the template generation of the report. What do I do wrong?
Regards,
Roy Derks

Robin,
Thank you for the details, we can display multiple pictures now.
The pictures are diplayed (which is correct) next to eachother, but every next picture is displayed a little bit lower than the other one. We are using the following coding:
<11BRG048(M,Z_SAFETY_CARD_8008;*)>
<01GZC_ZSC81(G;*)[SZ:A;D:Personal Protection]>
<11BRG056(D;*)>
<11BRG056>
<11BRG048>
Note, that the following code is placed in a text box:
<01GZC_ZSC81(G;*)[SZ:A;D:Personal Protection]>
Thank you in advance.
Kind regards,
Roy

Resorting of components and display on WWI report

Hi,
we would like to display the ingredients of a compostion on a WWI report. We have implemented a user exit GEN_POSRG to change the sorting order of the ingredient before the output. The ingredients need to be displayed as a flow text separated by comma. Unfortunately the combination of both cases does not seem to be that easy. I tried to use two POS repeating groups (S:POS;1) and comma (S:POS;2-) to show the first ingredient and then in a loop all other ingredients with a preceeding comma. When attaching the user exit to both POS groups the first POS group wil lonly get the first ingredient instead of all. So the sorting does no work.
Any idea on how to solve this?
Regards, Michael

Hello Michael,
it might be possible to use a stack. Say you want to sort the ingredients based on their content, the component with the highest content in the mixture should come first. Try:
Initialize stack:
<11BRG001(M,SAP_EHS_1012_004;)><11BRG002(S:POS;)>
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_NEW)[D:Value]>
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_PUSH)[D:Value]>
Sort stack in descending order:
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_SORT_DESC)[D:Value]>
<11ERG002><11ERG001>
If stack is not empty:
<13BNG005(*:01GESTVCOMPA(M:C14N_SYMBOL_STACK_TOP))>
Print highest value:
<11BRG006(M,SAP_EHS_1012_004;*)>
<11BRG007(S:POS;1)>
<01GESTVCOMPA(M:C14N_SYMBOL_STACK_TOP)>
<11ERG007>
Print all other values:
<11BRG008(S:POS;2-*)>
, <01GESTVCOMPA(M:C14N_SYMBOL_STACK_TOP)>
<11ERG008><11ERG006><13ENG005>
I haven't tested this code but it should work. Please note that the stack may in your system not be in name space C14N but rather in /TDAG/CS104 or ZISI104. You need to check this.
Good Luck,
Ralph
Edited by: Ralph Paczkowski on Mar 2, 2012 1:12 PM

Error on WWI report generation

Dear all,
for our new ECC 6.00 EhP5 system we set up a new WWI server on Windows Server 2008 R2, everything has been set up accordingly and the RFC calls are working fine.
When we tried to generate the first report with a dummy template (only ph value is included and "Report from Value" runs fine) we receive the following error:
17.11.2011 09:50:41 Job started
17.11.2011 09:50:41 Step 001 started (program RC1WWIWP, variant , user ID DE_BTC_BUS)
17.11.2011 09:50:41 Problem occurred during report generation; check the report log
17.11.2011 09:50:42 Generation error on WWI server SV001
17.11.2011 09:50:42 Internal program error; (SAPLC1F3 C1F3_GEN_RAWREPORT_CB API_READ 0120)
17.11.2011 09:50:42 Job finished
Unfortunately I was not abel to find something assigned to this in OSS.
Does anybody have faced something similar before?
Any hint is more than welcome!!!
Best regards,
Christoph
Add. information: I don´t know whether this is important but the process is creating a document SBR that you can see in CV04N.
Edited by: Christoph Giehl on Nov 18, 2011 12:27 PM
Problem was fixed - missing authorizations with the batch user.
Edited by: Christoph Giehl on Nov 18, 2011 2:11 PM

Problem occured due to missing authorizations of batch user.

WWI report Symbols

Similar Messages

Maybe you are looking for