WWI reports not progressing to complete in Export call

Hi All,
We are facing an issue in report progressing ,through export call.Infact we are running an interface run to export released MSDS from SAP to another place.Now the reports are getting generated and released.Later on the status changes to work in progress and Bundled.
once in Bundled stage,reports are not progressing.Status changes to "Errors found"
Details : The results file of generation are not found in WWI server.
This look so strange to me as the reports are generated to completed status if manually created(Manual call) or with SD call .
Servers when tested,all RFC'are correctly working ...
Pl let me know if you have any valuable inputs in this issue.
Thanks&Regards
George

Hi Ralf,
Thanks for the reply.The out put is generated by export call like this...Once the report is in completed status,it will generate the required out put as a .pdf and .xml file in the application server
In SD call and manual .rtf is generated as per usual.
The parameter values also getting generated from SAP side when i checked and everything is fine till bundling..Once in bundling,it says the result file cannot be seen in WWI server.
Thanks
George

Similar Messages

Datapump network import from 10g to 11g database is not progressing

We have an 11.2.0.3 shell database in RedHat Linux 5 64-bit platform, and we are pulling data from its 10g database (10.2.0.4) HP-UX platform using datapump via NETWORK_LINK. However, the import seems to be not progressing and completing. We have left it run for almost 13 hours and did not even import a single row to the 11g database. We even try to import only one table with 0 rows but still it is not completing, the logfile just continue to be lopping on the following:
Worker 1 Status:
Process Name: DW00
State: EXECUTING
Estimate in progress using BLOCKS method...
Job: IMP_NONLONG4_5
Operation: IMPORT
Mode: TABLE
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Worker 1 Status:
Process Name: DW00
State: EXECUTING
We also see this:
EVENT SECONDS_IN_WAIT STATUS STATE ACTION
SQL*Net message from dblink 4408 ACTIVE WAITING IMP_NONLONG4_5
Below is our par file:
NETWORK_LINK=DATABASE_10G
DIRECTORY=MOS_UPGRADE_DUMPLOC1
LOGFILE=imp_nonlong_grp-4_5.log
STATUS=300
CONTENT=DATA_ONLY
JOB_NAME=IMP_NONLONG4_5
TABLES=SYSADM.TEST_TBL
Any ideas? Thanks.

Thanks a lot for all who have looked and responded to this, I appreciate you giving time for suggestions. As a recap, datapump export and import via dumpfile works on both 10g and 11g databases, we are only having issue pulling data from the 10g database by executing datapump network import (using dblink) from the 11g database.
SOLUTION: The culprit was the parameter optimizer_features_enable='8.1.7' that is currently set on the 10g database, we have taken that out of the parameter file of the 10g database and network import worked flawlessly.
HOW DID WE FIGURE OUT: We turned on a trace to the datapump sessions and trace file shows something about optimizer (see below). So we have taken one by one any parameter that has something to do with optimizer and found out it was optimizer_features_enable='8.1.7' parameter that when removed makes the network import successful.
SELECT /* OPT_DYN_SAMP */ /*+ ALL_ROWS opt_param('parallel_execution_enabled',
'false') NO_PARALLEL(SAMPLESUB) NO_PARALLEL_INDEX(SAMPLESUB) NO_SQL_TUNE
*/ NVL(SUM(C1),0), NVL(SUM(C2),0), NVL(SUM(C3),0)
FROM
(SELECT /*+ NO_PARALLEL("SYS_IMPORT_TABLE_02") INDEX("SYS_IMPORT_TABLE_02"
SYS_C00638241) NO_PARALLEL_INDEX("SYS_IMPORT_TABLE_02") */ 1 AS C1, 1 AS C2,
1 AS C3 FROM "DBSCHEDUSER"."SYS_IMPORT_TABLE_02" "SYS_IMPORT_TABLE_02"
WHERE "SYS_IMPORT_TABLE_02"."PROCESS_ORDER"=:B1 AND ROWNUM <= 2500)
SAMPLESUB
SELECT /* OPT_DYN_SAMP */ /*+ ALL_ROWS IGNORE_WHERE_CLAUSE
NO_PARALLEL(SAMPLESUB) opt_param('parallel_execution_enabled', 'false')
NO_PARALLEL_INDEX(SAMPLESUB) NO_SQL_TUNE */ NVL(SUM(C1),0), NVL(SUM(C2),0)
FROM
(SELECT /*+ IGNORE_WHERE_CLAUSE NO_PARALLEL("SYS_IMPORT_TABLE_02")
FULL("SYS_IMPORT_TABLE_02") NO_PARALLEL_INDEX("SYS_IMPORT_TABLE_02") */ 1
AS C1, CASE WHEN "SYS_IMPORT_TABLE_02"."PROCESS_ORDER"=:B1 THEN 1 ELSE 0
END AS C2 FROM "DBSCHEDUSER"."SYS_IMPORT_TABLE_02" "SYS_IMPORT_TABLE_02")
SAMPLESUB

Could not complete the export command because of an application error

Every once in awhile I get the error, "Could not complete the export command because of an application error" when using the Save for Web option. It's really confusing because the error is not consistent. I don't get it all the time. In fact, 99% of the time I can save with no problems. When I quit Photoshop and reopen my files they seem to save just fine. Does anyone know why this happens, and how to prevent it from happening in the future?
Here are my specs:
Macintosh: iMac
OS: 10.6.8
Photoshop: CS3 (v10.0.1)
Any help is greatly appreciated!

No idea about the specific issue, but I like to pass on some general advice I have received myself here over time:
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.

Could not complete the export command because the file could not be found

When I try to save for web, Photoshop pops up a dialog box that says "could not complete the export command because the file could not be found".
What is the solution for this?

Please provide more information (Photoshop version, OS, target volume, …).
Does the file’s or one of the folders’ name contain problematic letters (slash etc.)?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Report not downloading completing in Excel

Hi,
We have developed a Z report which i am trying to download in Excel.The report is huge one having 1 lakh line items.When i download the report not all the line items are downloaded in excel.
In excel the max rows are 65536 so my question is why a additional sheet is not created to download the entire report.
Is there a way to download the report completely in excel. Are there any setting to be made in excel?
I have excel .xls having 65536 rows as well as Excel 2007 .xlsx having 1048576 rows.
Pl advice
NS

Thanks

Help me! "Could not complete the export command because of an application error"

Please, help me!
I've got the mistake "
"Could not complete the export command because of an application error" when I save for web in PS3 in win
thks so much,

You need to provide much more info about your system or else this is pointless.
Mylenium

PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

Dear Adobe Community,
I got my first imac a few days ago, and i decided to install Adobe CC.
When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
And I also have a problem with Premiere, when i want to export a project says that premiere must close.
This is the try version, is this a problem of Adobe or Apple? i'm very worried
Help!
Thank you!
Ivana

Muchas gracias!!! Ha funcionado!
El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
created by Federico Platon in Foros de usuario a usuario - View the full discussion
Confirma que se trata de una cuestión de permisos.
Por cierto te aconsejos actualices la 9.1 a 9.2, posiblemente se habría arreglado así también.
Bueno los pasos son:
2. Select Go from the Finder Menu.
3. Select Computer.
4. Select Macintosh HD.
5. Select Users.
6. Select your user profile.
7. Right click on user profile. Select Get Info.
8. Go to bottom and unlock with admin password to make changes.
9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
Creo que no se necesita traducción.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Foros de usuario a usuario at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Alter nate color applied in SSRS report is not updating correctly when you export to excel

alternate color applied in SSRS report is not updating correctly when you export to excel. Please let me know how can I resolve this issue
Smash126

Expression I am using report is
=IIf(RowNumber(
Nothing)
Mod2 = 0,
"Silver",
Nothing)
Smash126

Exporting HDV video to interleaved not progressive

All the export options on PP seem to be HDV progressive.
I need to send a Mpeg 4 file that is not progressive, but interleaved.
Does anyone know how I do this.
I want format 10.80 x 1920.50i
10mbs compression.
Thanks

It's been my observation that the H.264 options all turn progressive, no matter what you have it set for.
But the H.264 Blu-ray options will keep it interlaced if you set it that way.

Error sending emails: Windows Live Hotmail was not able to complete this request. Microsoft may contact you about any issues you report.

Every time i start writing a new email to send in Hotmail, i get an error message appear preventing me from continuing saying, 'Windows Live Hotmail was not able to complete this request. Microsoft may contact you about any issues you report.'
I don't get this problem with Windows Explorer?

If you have any form of Pop Up blocker, this can cause the error message.

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

Do you have any filters applied to your clips?
This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
Anywho, export again, this time with "self contained" movie selected.
Then try to import to Compressor.

Premiere CC 2014 not completing an export of h.264 or quicktime video

Hi everyone,
Did anyone experience this before? The export seem to stop indefinitely after 1 or 2% never at the same time and its happening when I export with the following export settings: 2014-11-26_0628 - Webamp's library on CC 2014.1 and the last version. I made sure to upgrade Premiere and Encoder to the latest version.
The sequence is about 50 minutes long with multiple sequences and a few audio files.
I'm running this on a 64bit Windows 7 machine. Never had a problem before on either Premiere version. Note that I had tried exporting to Media encoder but the same thing would happen it would just stop after a few percentage.
I tried restarting my PC, no idea why this was happening.
Also it was happening on other shorter video sequences (different projects) i was trying to render/export but it finally worked after a few tries, but i can't seem to get this one working yet.
Any help would be appreciated!
Thank you
Patrick

Hi everyone,
Did anyone experience this before? The export seem to stop indefinitely after 1 or 2% never at the same time and its happening when I export with the following export settings: 2014-11-26_0628 - Webamp's library on CC 2014.1 and the last version. I made sure to upgrade Premiere and Encoder to the latest version.
The sequence is about 50 minutes long with multiple sequences and a few audio files.
I'm running this on a 64bit Windows 7 machine. Never had a problem before on either Premiere version. Note that I had tried exporting to Media encoder but the same thing would happen it would just stop after a few percentage.
I tried restarting my PC, no idea why this was happening.
Also it was happening on other shorter video sequences (different projects) i was trying to render/export but it finally worked after a few tries, but i can't seem to get this one working yet.
Any help would be appreciated!
Thank you
Patrick

TS1424 When I touch the secret passages icon to play the game it starts to load and then when the progress bar completes the game crashes and goes back to windows. It's very frustrating as I really enjoy this game but if it's not rectified I might have to

When I touch the secret passages icon to load it the progress bar completes and then the game won't start it goes back to windows. I really like this game but if it carries on I might have to delete it sadly

Have you checked to see if there is an Update for the game ?
Also... Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Report creation progress indicator

Hello All,
I am looking for a way to represent to the user the progress of the report creation.
(Most users get upset when reports donu2019t appear immediately)
A basic example would be to be able to display the current page being produced.
Page N has been produced ....
I am creating a Java Project, so would like to output the progress to the System Console,
currently
reportClientDocument.open (reportFilePath, OpenReportOptions._openAsReadOnly);
is the part that is taking the most time, so is there a way I can follow the progress of this?
I had a thought, and I use this very lightly as I have not looked into it at all, that I could maybe bring in
something like a UFL within the Report to indicate the report creation progress.
As I say I have only had a half think about this all but was hoping someone had an idea on how best
to get this info.
Any ideas or pointers would be great.
Thanks
Darren

Thanks Ted,
I thought it wouldnt be too easy. We already have a nice big whirly, but you know what users are like.
Ill just have to put up some vague notifications about opening, populating and exporting the reports.
Ill keep fiddling with a few things and see if I can come up with something a little more accurate,
will leave this topic open incase some others have any ideas.
Cheers
Darren

WWI reports not progressing to complete in Export call

Similar Messages

Maybe you are looking for