WWI Server configuration for EHS

Dear Experts,
First time i have sucessfully installed and started the EHS in my Server, but after installing MS Word in my server i have uninstalled teh EHS and installed again in my server but this time EHS service is not running it is giving the following message when i have starting manually.
"Could not start the EH&S Administration Management Server service on
Local Computer.
Error 1053: The Service didnot respond to the Start or control request
in a timely fashion"
I am trying to creating service manually using ehsManSrv.exe it is giving following message
C:\Program Files\SAP\FrontEnd\SAPgui\wwi>ehsManSrv.exe /R
EH&S Administration Management Server
Info:
Open file 'C:\Program Files\SAP\FrontEnd\SAPgui\wwi' (and create if necessary)
Error:
Unable to open file due to following reason
C:\Program Files\SAP\FrontEnd\SAPgui\wwi\ contains an invalid path.
HelpContextID = 61859
Please help me needfull
Regards
Chandra

Hi Brahmankar,
I have successfully installed EHSWWI32_19-20000084.exe, it is running properly i have check in CGSADM, but when i am editing document in CG42 i am getting following error.
"Error occurred while assigning the document template wwilayt.dot"
even i have maintained all register entries in server as per 866032 note. but still it is showing that
"Check whether WWI is installed correctly. The following registry entry must exist for the document template wwilayt.dot:
HKEY_CLASSES_ROOT/WWIDOCUMENT/InstallDir"
Regards
Chandra

Similar Messages

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Printer Server configuration for APEX 3.1.2 in 10g XE

I have APEX3.1.2 installed in 10g XE and I am going thorough the OTN tutorial "[Oracle Application Express 3.0-- Building a Functional Application"|http://www.oracle.com/technology/obe/apex/obe30/apexdev30.htm#l7] in the section "Editing Application Objects".
When I click "Print Attribute" of a page region, it displayed "{color:#ff0000}Report printing is currently not available, there is no print server configured{color}".
Can you tell me what this means and how to resolve it. All I have is APEX3.1.2 installed in 10gXE.
I have searched this forum and it seems that I have to install/configure a printer server?
Thanks!
Kevin

Dan,
I have the same problem as Kevin.
Your answer to his question can be very helpful. But if I follow the link you provide, I cant find the step 5.2.
Step 5.1 is clear. But what are the tasks of step 5.2?
I hope that you can tell me this.
Thank you.
Carlos

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

Regd.UDDI server configuration in PI 7.1 and services registry

Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi

Newbie problems with getting a local CFB server configured

This started out in another post by me as to what I thought was a port 8500 problem. I had watched the getting started with CFB video, and on that he used localhost as a Server Name and as Host Name. He then assigned port 8500 as the WebServer Port.
When I do this it comes up in the Servers windows as Stopped. If I try to start it the error I get is
'Starting localhost' has encountered a problem
Ensure that the server is not already running or any application is not using the webserver port.
So as an experiment I changed the port to 80 because the admin page does work at http://127.0.0.1/CFIDE/administrator/index.cfm
The Server window at the bottom of the CFB screen then shows a Running server.
I create a small "Hello World" index.cfm page and when I hit one of of the browser tabs, Firefox and IE in my case, I get the following error,
Error while generating preview:
There is no server configured for the project myproject to which the file index.cfm belongs. Configure a server in ColdFusion in ColdFusion server settings before you proceed.
What am I missing ?
Thanks,
Dennis

You need to tell CFB what server CFB should use in order to preview the file.
So you need to associate a server with this Project. To do so, right click on Project -> Properties -> ColdFusion Server Settings.
Here from the dropdown of 'Servers' select the server that you added in CFB.
Once that is done, ensure that your project is in document root of the server which in your case could be the Inetpub\wwwroot.
Once this is done the preview should work.
-Bhakti!
Adobe ColdFusion Team

Siebel 8.1.1.11 • Error in Siebel Server Configuration

Problem Description
Hi,
I'm trying to make the Siebel Server Configuration for a new Development Environment.
After completing the Siebel Configuration Wizard I am having the following error:
2021 2014-05-28 12:40:21 2014-05-28 12:40:21 -0300 00000004 001 003f 0001 09 srvrmgr 3672 2404 D:\Siebel\8.1.1.11.0\ses\siebsrvr\log\srvrmgr.log 8.1.1.11 [23030] ENU
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sccobjs.cpp (964) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (samisc.cpp (284) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog GenericError 1 0000000553860e58:0 2014-05-28 12:40:21 (sasess.cpp (399) err=2555932 sys=0) SBL-SCM-00028: Key not found
Please can guide me to solve this problem
Kind regards,
Christian
Error Codes
SBL-SCM-00028
Problem Category/Subcategory
Installation (installation of FPs, QFs, PSs, Product Certification & Supported Platforms)/Siebel Server
Uploaded Files
File: srvrmgr.log;srvrcfg.log

Siebel Name Server Backing File
8.1.1.11 [23030] ENU
1.2
BAkAAAAAAAA=
Persistence=partial
Type=empty
[/enterprises]
Type=empty
[/enterprises/FUSION_SES]
Type=empty
[/enterprises/FUSION_SES/servers]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Host]
Type=string
Value="fusion_server"
Length=26
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/ServerDesc]
Type=string
Value="Siebel Server Profile SIEBELSRVR FUSION"
Length=78
[/enterprises/FUSION_SES/servers/SIEBELSRVR/parameters/Lang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes]
Type=empty
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncStartTime]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/Primarylang]
Type=string
Value="ENU"
Length=6
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncPlannedCompletion]
Type=string
Value="000100"
Length=12
[/enterprises/FUSION_SES/servers/SIEBELSRVR/attributes/SyncEndTime]
Type=string
Value="000100"
Length=12
[/gateways]
Type=empty
[/gateways/default]
Type=empty
[/gateways/default/version]
Type=empty
[/gateways/default/version/VersionString]
Type=string
Value="8.1.1.11 SIA [23030] ESN"
Length=48
[/gateways/default/definition]
Type=empty
[/gateways/default/definition/name]
Persistence=full
Type=string
Value="default"
Length=14
[/gateways/default/definition/full name]
Persistence=full
Type=string
Value="Siebel Gateway"
Length=28
[/gateways/default/definition/description]
Persistence=full
Type=string
Value="Siebel Gateway Server"
Length=42
[/gateways/default/definition/enable state]
Persistence=full
Type=string
Value="enabled"
Length=14
[/gateways/default/definition/object id]
Persistence=full
Type=integer
Value=0
[/gateways/default/attributes]
Type=empty
[/gateways/default/attributes/UseDefault]
Type=string
Value="SBA_82"
Length=12
[/gateways/default/attributes/CreateDefault]
Type=string
Value="SBA_82"
Length=12

Server configurated:3 Server partecipating: 0

          Hi,
          after setup a WLS 6.0 sp2 Cluster based on 3 Unix (1 adm + 2 managed) from console
          i actually see :
          Server configurated for cluster: 3
          Server partecipating to cluster: 0
          It's something wrong ? When i'll see the second counter incremented ?
          THKS


In this case, the problem can be in one or more layers:
          1) Apache plugin: make sure its installed correctly, according to bea docs. Then check the Apache
          logs (including error.log) to see why servlets aren't being called
          2) Make sure your web server is set up correctly, that it is the DefaultWebServer if this is what
          you are expecting (note WL 6.0 sp1 & 2 you will need to manually edit config.xml to set this)
          3) Make sure your servlet(s) are registered properly in web.xml, according to BEA docs
          4) Check the access log on your web servers to find out why servlets aren't being invoked.
          Gene
          "adriano villani" <[email protected]> wrote in message
          news:[email protected]...
          >
          >
          > Actually the admin is not part of the cluster, but the cluster (failover & balancing)
          > seems working (only for html/xml contents).
          >
          > Even when i use the ?_WebLogicBridgeConfig the result shows me
          > a blank list of machine partecipating in the cluster...
          >
          > unfortunately i've problems calling servlets (i'm using the Apache proxy plug-in),
          > that are not routing at all !!
          >
          >
          > Adriano Villani
          > Sema Group S.p.A. - System Integration Architectures
          > * Via Zoe Fontana, 220 - 00143 Rome (Italy)
          > * +39 0641536340 - +39 06415361
          > * [email protected]
          >
          >
          >
          > "Gene Chuang" <[email protected]> wrote:
          > >Make sure your admin is NOT part of the cluster, otherwise your cluster
          > >won't work at all.
          > >
          > >If you create a cluster folder correctly in console and add the 2 managed
          > >servers to this cluster,
          > >then simply starting these managed servers will cause them to join the
          > >cluster.
          > >
          > >Gene
          > >
          > >"Adriano Villani" <[email protected]> wrote in message
          > >news:[email protected]...
          > >>
          > >> Hi,
          > >> after setup a WLS 6.0 sp2 Cluster based on 3 Unix (1 adm + 2 managed)
          > >from console
          > >> i actually see :
          > >>
          > >> Server configurated for cluster: 3
          > >> Server partecipating to cluster: 0
          > >>
          > >> It's something wrong ? When i'll see the second counter incremented
          > >?
          > >>
          > >> THKS
          > >
          > >
          >

How NOT to edit SSIS dtsx packages manually to change config filter in SQL Server configuration schema

I have many packages that are using the package configuration with the following way:
-ALL Packages have the XML configuration file that has only one proporty defined. The ConnectionString of the SQL Server connection that holds the configuration table for the rest of the properties
-A SEPARATE SQL Server package configuration for
each connection manager in the package.
-Finally an SQL Server configuration for all the properties that are specific to this package.
I attach a pic of what i mean: Yellow is the XML config with the connectionstring, Blue the connectionamangers and purple the package specific.
So with this setup i can:
-Change the xml file location and just point all the setup in another sql server or another database.
- Or create different configuration filters in the same config table and try to go into the package and change the filter.
With all the above the problem is that if i do anything from within VS, i am loosing the password in the connectionstring because i am not using the encrypt property. And i dont want to use it...
What are my options? Just go in .dtsx with notepad and chage what i want BEFORE i open the package or before i deploy?
Elias

You are correct but:
-I dont want to use EncryptSensitiveWithPassword, so:
When i go to package configuration and try to change the ConfoigurationFilter to point to another setting then i am getting to the screen to select the property (connectionstring) and when i finish the DATABASE record for the setting is cleared from the
Password= that i have put previously.
So i short what i want:
-No EncryptSensitiveWithPassword
-Being able to change configuration from within VS WITHOUT resetting the connectionstring string.
Elias
Nope what you're asking is not possible
There's certainly a purpose why each of things are given in the current format
For design level settings you need to use connection manager properties and for it to persist values for someone other than creator to use you need to use protection level as EncryptSensitiveWithPassword
And for runtime settings you need to specify values in config which has to be editted from outside the package by editing dtsconfig file or using update query depending on whether config is stored in file/table. In both the cases you can identify password
as a separate config item and modify its value from outside. That will work regardless of what you chose as protection level
see
http://blogs.msdn.com/b/runeetv/archive/2009/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Method to find version of EHS WWI server

Hello Experts,
I'm trying to find out EHS WWI server version by tcode CG5Z [in SAP 4.7] -> Utilities - test server.
It gives a popup with WWI server details.--
[WWIRFCSV-Version : EH&S WWI 3.2 ASCII
Running as Windows Service
This RFC library belongs to the SAP R/3
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
WWI-specific informations :
Windows NT, Version 5.2, Service Pack 1.. and other windows server information]
I was not able to find any version information on WWI directory in Program files on Windows server.
Is there any other method to check version by logging onto the Windows server?
Thanks for the help.
Regards,
Vaibhav

Hello all
distributed with WWI package is the programm WWIINFO.EXE. Running tis program you will get a wwiinfo.txt file generated on your server in which you find all informations regarding WWI version etc.
Based on experiences using WWI you should use if possible always the recent version of WWI available. Normally something like two new versions are released per year. There exists an OSS hint describing WWI and the recent release.
With best regards
Christoph

Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.

You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Sharepoint 2013 : Server was unable to process request. --- Site is not configured for Claims Forms Authentication.

In our java web application trying establish the connection for sharePoint 2013
using Windows claims authentication (NTLM ), I am getting error message "Server was unable to process request. ---> Site is not configured for Claims Forms Authentication". But In the Sharepoint 2013 our Site is is configured for Windows
claims only.
In the Sharepoint 2013 server in the IIS manager settings for authentication it is enabled for both Windows claims and Forms authentication,
but if I disable Forms authentication that I will be able to connect it through my application but with the direct access i.e., by running the URL in the browser I am not able to connect getting error message "sorry this site has not been shared with
you" in the browser Kindly help me on this.

Hi,
This issue is always caused that you had missed FBA configuration in web config of your web application.
You can configure the FBA authentication then check whether it works.
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://chrisbarba.com/2013/07/16/sharepoint-2013-forms-based-authentication-fba/
more reference:
http://stackoverflow.com/questions/5686378/sharepoint-2010-claim-base-authentication-error
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82dcd4-0e57-4de5-81bc-60ffc3cb9a9f/sharepoint-2010-claim-authentication-and-authenticationasmx?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Problem in setting up XCM Configuration for Local Server

Hi
I have installed Local J2ee engine on my computer and have deployed E Commerce B2B B2C sca packages.
I am trying to complete the XCM configuration for my Local Engine. For below 4 links, I have done the configuration, creation of JCO, Shop, etc is done and have tested the JCO, the test is successful. JCOs are pointing to ECC 6.0 which is development server and on development server the XCM configuration is working fine.
http://<host>:<port>/b2b/admin/xcm/init.do
http://<host>:<port>/b2c/admin/xcm/init.do
http://<host>:<port>/isauseradm/admin/xcm/init.do
http://<host>:<port>/shopadmin/admin/xcm/init.do
But below 2 links are not working and I am getting "Page can not be displayed" error.
http://<host>:<port>/isauseradm/init.do
http://<host>:<port>/shopadmin/init.do
I need to created 2 shops in http://<host>:<port>/shopadmin/init.do but since the page is not displaying I am not able to proceed and hence when I try to login to b2b b2c application
http://<host>:<port>/b2b/init.do and http://<host>:<port>/b2c/ init.do , I am getting an error
"The shoplist read from buffer is empty",
I think this error can be resolved by creating 2 shops in http://<host>:<port>/shopadmin/init.do, but
http://<host>:<port>/shopadmin/init.do itself in not displaying.
Please can you help.
Thanks
Edited by: Neha Bhatia on Jun 4, 2009 10:31 PM

Hi
I checked the mentioned Patch Levels, everything seems to be fine.
After I did few changes in JCOs and checked the XCM configuration throughly shopadmin URL (http://<host>:<port>/shopadmin/shopadmin/init.do) has started working.
Now I have maintained 2 shops and can see the B2B and B2C web portals fine.
But as soon as I select any material, it is giving error saying error in XCM configuration related to IPC.
could you pleaase help me out with this?
Also, as soon as I click on the B2B Login link, it dumps.
And useradmin URL http://<host>:<port>/isauseradm/useradmin/init.do is still giving "Page can not be displayed",
These problems are related to XCM configuration, but not sure where exactly and which configuration is missing. please can you suggest ? Any XCM configuration related document will also be helpful.
Regards,
Neha

WWI Server configuration for EHS

Similar Messages

Maybe you are looking for