WWI-server reporting - population of information from 1 substance
Hi,
I would like to include the CAS-number from each Hazardous Ingredient on one MSDS output (by using WWI-server concept).
The Hazardous Ingredients are maintained in the Specification Workbench and therefore the information is already available in the system. But is it possible to populate information from out of more substance propoerties or identifiers to one MSDS output (through WWI-server and MS-Word wizard tooling)?
Thanks.
Kind regards,
Roy Derks
Hi Roy,
Its not possible to print CAS numbers for all the Hazrad Inducers in a single document; coz the CAS number maintained in property trees of specification management for each specification; all the hazard inducers are assigned to DG clasifcation; and in each classification DG regulations are maintaned and the hazard inducers are assigned to each regulations.More than all, Hazard inducers are not maitained CAS numbers; but UN number is maintained;
In ur query you mensioned hazardous ingradient, if it is so pls let me know; I will check whether it is possible or not.
Regards,
Keshav
Similar Messages
-
Reporting pass/fail information from threads in Teststand logs
I am fairly new to Teststand. I am just getting started on threading techniques in TestStand. Previously, task A and B were running sequentially. To improve program run time, I am splitting the tasks into thread A and thread B. In the sequential version of the program, task B is running certain steps and logging to a Teststand log file. After I split the tasks into their threads, thread B does not perform the logging feature. Before the thread split, task B would log each error using
RunState.Step.Result.ReportText feature. This logging thread is the last step before thread A and B rendezvous. How do
I enable the logging in Teststand for thread B?I'm not sure if you need the rondezvous or not without knowing your program design. It may not be neccessary. Any sequence call that calls into a new thread will need a Wait step if you want if you want it in the report. It sounds like you don't need the rendezvous without knowing any more information.
-
Where does Application Server get its time information from?
Hello All,
My OS (AIX 5.2) has the correct time info. for e.g. right now, it's 09:40:24 EDT 2007
My application server console however displays GMT time on the home page. I've tried restarting the console to no avail. Has anyone run into this?
Thanks.A SCCP device will send a TimeDateReq packet to CCM and the CCM will respond with a DefineTimeDate packet which includes the current date/time and the phone can use the new time to keep in sync with CCM (ie. compensate for any drift since its previous DefineTimeDate request).
Sample snippet from CCM trace.
=====
08/07/2006 03:39:17.630 CCM|StationInit: (0000060) TimeDateReq.|
08/07/2006 03:39:17.630 CCM|StationD: (0000060) DefineTimeDate timeDateInfo=8/7/2006 3:39:17,1 systemTime=1154936357.|
=====
The interval at which a SCCP sends the TimeDateReq may vary by device type/model.
Here are a few of the known intervals/times.
Third-gen-phones (7970/61/41/etc) resync around 3:15am daily.
http://wwwin-metrics.cisco.com/cgi-bin/ddtsdisp.cgi?id=CSCsc29075&show=R-comments
Symptom:
A 7970/71, 7941/61, or 7911 that is not used for an extended period of time may show a different time compared to other 7940/60s registered to the same CallManager. It may be a few minutes behind.
Conditions:
Phone not used for an extended period of time
Workaround:
None. When the phone is taken off-hook, the date and time will be synchronized with the CallManager
Use latest phone load.
7912/05s are random.
http://wwwin-metrics.cisco.com/cgi-bin/ddtsdisp.cgi?id=CSCsd48532
7920 resyncs at 3am.
http://wwwin-metrics.cisco.com/cgi-bin/ddtsdisp.cgi?id=CSCse54674&show=fulltext
Other phones models/types may vary.
HTH
//G -
HIDE MSSQL Server information from all remote users
Hi Support,
We need to hide the MSSQL server version/product/edition information from remote users.
Kindly suggest us the relevent solution.
Thanks !Hi Support,
I understand that we can't restrict @@version sql query.
But, we found one of scan reports of website which is able to identify sql version , any clues hows this been happening , is this due to SQL injection vulnerability only or anything else in site application of SQL server
directly allowing SQL version identification possible.
Please suggest can we create a condition / Policy using Facet >> server information under Policy Management in SQL Server. steps would be like :
1. Export facet 'server information' in .xml format.
2. Make changes in .xml file related to server information e.g; product/product level/edition/edition engine etc.
3. Import modified xml file as a policy / condition.
4. Evaluate the Policy.
We performed above steps but we are not able to view modified server information while scanning reports of website.
Can you please suggest if the above procedure can be done to change the server information ( server will be the same only
information needs to be change). -
Getting information from DB02 tcode in function
I have developed a report which retrieves information from DB02 and it show information on a Word document.
I have used functions for Oracle and SQL server databases, but at my actual landscape, I was using DB2 for AIX and I have not the knowledge how to pick up de information.
In my report I use functions to pick up data for DB02, fill up internal table and after that to show the result in Word document
In Oracle I use function
DB02_ORA_FILL_TD110
Is any function in DB6 for AIX I can obtain the same result??
RegardsI'm not an AIX guru but try, $ prtconf
-
WWI server problem with report shipping order
Hi everybody,
we have a problem with the WWI server and report shipping orders for Inbound documents (PDF):
after we created an entry in CVD1 and using buttons "Accept" and "Ship immediately" we run the report RCVDEVEN. First time we did it the WWI server started working and ended with error but assigned the correct PDF. After that, the WWI server didt start anyway.
First error message:
The description for Event ID ( 91 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: PRD.
Second error message after second attempt:
The description for Event ID ( 95 ) in Source ( PRD ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 09/14/09 17:59:49 Start Function 'WWI_SERVER_INFO'
Initializing parameters
Initializing Tables
Receiving data from client
Sending data to client
Elapsed time : 0.1 sec.
OSS note 1058521 has already been found - but nothing described here is relevant for us: the RFC connection is working, the WWI monitor shows the server up and running.
Any ideas?
Thank you very much in advance and best regards,
ChristophHi folks,
fixed the problem myself. There have been some documents with error in the printer queue of the WWI server.
Best regards,
Christoph -
My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?
Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.
-
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
--- End of inner exception stack trace ---Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to store reports on cr server 2008 and view them from web application
Hi, I want to store my rpt files on the crystal reports server, under "Folders", and then from my web application use "CrystalReportViewer" control to show these reports.
Now I setup a crystal reports server 2008 on my server, and install crystal reports 2008 on my client develp machine. I have searched some sample codes from Internet, but many Business Objects dlls they used I could not find from my computer, for example, I can not find infostore dll and Business Objects.sdk. It seems I have to install some sdk to use these objects.
Could you tell if which sdk I have to setup to achieve my goal, or if can give me a sample would be highly appriecatied.Q. From your information, it likes this function above can not be done now?
A. At the moment, the only way you can view reports stored on CR Server 2008 are with the Java SDK or OpenDocument.
OpenDocument may be a nice option for you, as there would not be much programming involved. Please see this documentation for information how to use this. Please note that in CR Server 2008, you will be using Java OpenDocument.
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf
Q. can use CR server XI instead, this version has been a while, so certainly has .net sdk available for realize this function, does'nt it?
A. CR Server XI has the .NET SDK. You can find .NET samples here:
https://www.sdn.sap.com/irj/boc/businessobjects-sdklibrary
Q. I download CRRedist2008_x86.msi and install it on my develope machine, from the instruction said it will install lots of .net dll on my computer, but I just can not find them, do you know where they are?
A. It should install the necessary files to C:Program FilesBusiness Objects
You can find more information about the Crystal Reports .NET distributables in the CR .NET help file, in the deployment chapter:
https://www.sdn.sap.com/irj/boc/crystalreports-sdk
Cheers,
Fritz -
Code generate report in excel format from portal(Application Server)
Hi all
Please give some solution with code generate report in excel format from
oracle portal(Application Server).Not feasible.
Why? Because "the Excel format" is a binary and proprietary Microsoft file format. And writing a generator to generate Excel files will be complex, and resource expensive. In the vast majority of cases this will not be justified.
As an alternative the very basic Microsoft XML office format can be used. But note that this is not a a ISO standard (it has been shot down in flames) - and effort and resources for that would be better spend on the Open Document XML standard (which very likely will be ratified as the ISO standard instead).
Of course, you could have meant a CSV file - in which case, you need to play close attention to details. CSV is not an Excel format. A software designers and developers, our success is determined by attention to technical detail. In which case you are not paying any attention to technical detail by confusing CSV with Excel. -
Print information from a row - Report Builder 3.0 - printer button option?
Does Report Builder have any way of printing information from a row selection onto a page, rather than the whole report? I don't think it has a print button option when you create the report?
Hi KittyCat101,
According to your description, you want to select some particular rows when printing the report. Just as you said, there is no such feature in Reporting Services.
To work around this issue, we can create a parameter with the key field value in the report. Then we can print the particular rows based on the selection in the parameter. For more details, please see:
Create a multiple parameter named filter in the report.
Specify Available Values and Default Values from the dataset key field which is acted as filter when printing the report.
Add a filter as below in the tablix:
Expression: [Key field]
Operator: In
Value: [@filter]
When we render the report in report builder, it displays all data. While we can select the particular rows in the drop-down list when we want to print the report.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to retrieve information from server?
Hi,
I'm currently working on a project, which is implemented with JSP. The function of the JSP is to connect to different servers within the Intranet(IP address already known) and get database list & file list residing on each server. And then compose all those information into a table, and display them in JSP. I just wonder how can I connect to those server? Can I just set up a socket client? Once the connection between servers has been setup, how can I retreive information from server? Are there any reference I can use? Thank you very much for your considerations.
MyraActually, I need extract some information from the file, and those files are on the server. In this case, do you think I should use FTP client to visit server? The server is running with Weblogic.
-
iCal reports that it can't find server, and lots of data from several years ago is trying to get attention. Cannot bring up calendar in any view to use. also keeps loading unused calendar websites from long ago. I can' remove them. what to do?
UPDATE: I had 36 Safari windows open and minimized on the dock from my last session; 20 of those windows failed to open b/c Safari "couldn't find the server"; I just went to the URL bar of all 20 pages and clicked return, and all 20 pages loaded perfectly, without dropping any images or losing formatting. This is a puzzle!!!
-
Integrating Reports from SQL Server Reporting Services
Dear Experts,
I am given the URL to a report from SQL Server Reporting Services. The URL looks like
[http://<report_server_host>/ReportServer/Pages/ReportViewer.aspx?/<category>/<report>&<list_of_parameter_value_pairs>]
When this URL is executed, the user will be prompted for user name and password.
And I am given the following requirements:
- Integrate the report into SAP NetWeaver Portal
- The report has to be passed parameters with values generated at runtime and which must be hidden (because it is sensitive data)
Initially, I have been working on two options:
1. using Application Integrator (portal application: com.sap.portal.appintegrator.sap, portal component: Generic)
2. using URL iView
With the Application Integrator, however, I got the following error:
The operation you are attempting on item "/" is not allowed for this item type. (rsWrongItemType)
I cannot find the solution to this. It looks like the URL which contain "/" after "?" is not appropriate for the Application Integrator.
So I turn my focus away from the Application Integrator, but to using the URL iView instead. And in order to hide the parameters passed, I make the following settings in the URL iView:
Request Method = POST
Fetch Mode = Server-Side
But then I got the following error:
Failed to fetch the content. The response status was 401.
Message:
(I have defined an HTTP system and used it in the URL iView.)
Does anyone know how to fix the errors (either with the Application Integrator or the URL iView)?
Your answers will be much appreciated!
Regards
Sakprasat SumHi
Was a solution for this found?
I am trying to achieve the same thing, create an iView that links to an existing SQL Reporting Services report.
Cheers,
Andrew
Maybe you are looking for
-
Can't install the software because it is not currently available from the Software Update server...what does this mean? I'm trying to install windows 8.1 on my early 2009 iMac. I double check with telephone support to make sure I am able.
-
Which Version of Adobe do I need to be able to "extract" a page from a existing file and save/download to another file?
-
Email notification of subscriptions
Hi, Is there by standar way notification by mail of subscriptions in oracle portal ? I have seen that is possible subscribe to page or items but the notifications are made to the notification porlet, is possible to notify by mail ? If there is not a
-
I need to set up a network connection between two buildings about 450' apart. I have a clean line of site between the two buildings. The apparent obstruction of the building in the middle is not accurate, that building is lower. The central netwo
-
Last license check 4 weeks and evaluation license key timed out
Due to holidays and other projetcs I've used my SAP NetWeaver Sneak Preview ABAP last time in October '08, my evaluation license kex ended 12-29-08. Today I've tried as usual to install the today requested new eval lic key. But I'm not able to instal