WWN does not show up on Cisco SAN Switch

We use Cisco SAN Switches MDS 9134 and MDS9222i with NX-IOS 4.2.(3). Our HP c7000 blade enclosure is connect through a Fibre Channel Virtual Connect Card to the SAN switches. For so far is everything working Oke. Now is the problem when I connect the 8th and 9th Blade Server (BL860c i2 Integrity Server) to the c7000 enclosure non of the wwn's show up on the Cisco Switch. Neither on the MDS9134 as the MDS9222i.Firmware on the HP Blade is up to date. The Onboard Administrator show that the HBA's are logged-in to Virtual Connect.
Does anyone know solution for this issue.
Best Regards,
Robert

Hi Robert,
The output of "show flogi database" will show you all the wwn's of devices connected directly to a particular
switch.
Is NPV involved in your topology?
Regards,
Ken

Similar Messages

CLI does not show on secondary line in cisco 9971 through MGCP CO line

Hi,
There's an issue that CLI does not show on secondary line in cisco 9971 through MGCP CO line. Only the calls that are getting to the first line shows CLI.
It shows as "unknown number" when it's getting a call to the secondary line ( MGCP CO line).
Has anyone faced this issue?
Please help to resolve.
Thanks & Regards,
Achintha

Don't use TimeLines. Log-in to the Adobe Exchange with your
Widget Browser ~ http://labs.adobe.com/technologies/widgetbrowser/
jQuery & Ajax Slideshows from Adobe Exchange:
    * jQuery Cycle Widget
    * Lightbox Gallery Widget
    * Spry Content Slideshow
    * Spry Image Slideshow
As to your layout problems, we still need a link to your page.
Free host for testing: http://www.000webhost.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

How to uninstall IE11 when it does not show in control panel Add/remove so that I can put back IE10

I finally got HP smart web printing software to work, now I need to know how to uninstall IE11, it does not show in Add/remove programs in control panel, I want to install IE 10 instead as IE 11 keeps shutting down.
Using HP Pavilion Elite desktop , windows 7 home, product # AY603AA.
Thanks in advance.
This question was solved.
View Solution.

Emma, welcome to the forum.
You can go into Control Panel / Programs and Features / Turn Windows features on or off (In the left column). Uncheck Internet Explorer 11 and click OK. This will uninstall it. You can uninstall of install all of Windows features from there.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Unified Communications Attendant console: queue does not show in the client

Hello,
I have Cisco Unified Attendant Console - Department Edition 9.1.1.10 in conjunction with CUCM 9.1.1.
My problem is that when I login with the operator account to the client the queue does not show up as expected.
I have configured the queue, synchronized with CUCM, i can see it in CUCM under device/CTI route point, i have associated the queue to the operator in user configuration queue association.
but when i login as the opeartor to the client i can not see it.
any help is apreciated.
thanks

Hi,
This is working correctly, as you can only associated a single queue (department), this is not displayed in the operator console client.
You only see the queue list in Business, Enterprise or Premium Edition.
Jamie

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
Are the files lost forever or can i recover them by going to a shop or using a software?

Thank you for responding.
This might sound stupid since i'm not really knowledgeable with Macs,
but since all my files were moved from my mac computer to the external hard drive,
is it possible to recover those files through my Mac - like recovering deleted files?

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements? [tags]

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??

Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Adobe Creative Cloud does not show all my apps as registered.

Adobe Creative Cloud properly shows my Adobe Photoshop CS6 as registered. However, it does not show my Adobe Acrobat XI Pro, or my Adobe Photoshop Lightroom 4.4 as registered. How can I get these programs to be properly registerd as "MY APPS" in Adobe Creative Cloud? I am running Windows 8 and have had photoshop for a number of years. I installed Acrobat XI Pro in December, but it has never been recognized in Adobe Creative Cloud as registered.

Hey Pete,
I'm not sure why Acrobat XI is not recognized. It is on my system. Maybe try uninstalling and reinstalling it.
You can uninstall through the OS
Control Panel > Programs & Features
and then reinstall it through the Creative Cloud app or https://creative.adobe.com/products

I subscribed to Creative Cloud for teams and LR does not show in AAM.

I have a licensed copy of LR4.4 installed along with CS6. Howeveer LR does not show in AAM and cannot be accessed. Please advise to solution.

Whaleybird1958 which operating system are you using? Please make sure you meet or exceed the system requirements listed at http://www.adobe.com/products/photoshop-lightroom/tech-specs.html.

Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6

Photoshop CC2014 running under window 8.1. How do I access mini bridge. It does not show under FILE or WINDOW-EXTENSIONS. Works ok with CS6

Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

HT5772 How do I delete voice memos from my phone? It does not show on the app or in iTunes. Thanks!

How do I delete voice memos from my phone? It does not show in the app or in iTunes. Thanks

Welcome to the Apple Community.
Settings > Music > Show all music > Off

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

WWN does not show up on Cisco SAN Switch

Similar Messages

Maybe you are looking for