Wwsto_api_session API

Hello,
Is there a way to query all the contents of a session object without specifying an attribute? At the moment I'm successfully using the likes of:
myValue := l_store.get_attribute_as_varchar2('myAttributeName');
However, I want to loop through EVERY value in my session store and retrieve the name/value pairs instead of having to specify every individual attribute name.
Thanks,
Alan.

Yes, it should in fact be both in Portal30 and Portal30_sso.
Perform the following query to make sure it is not in any other
schema:
select owner,object_name,object_type from all_objects where
object_name = upper('wwsto_api_session');
/Harald

Similar Messages

  • Passing values from a form to a page containing forms.

    I would like to pass a value from a form to a page containing two forms (one of the forms is in a tab).Once the value is passed, I want the two forms to be executed with the value passed. Can this be done and how? Any help would be appreciated. Thanks.

    Yes, this is possible.
    I will give you a brief outline.
    From the 1st form, you need to save the value, you want to pass to the 2 other forms, using the wwsto_api_session apis.
    Then, using go() or call() from the Successful submission section, you need to go/call the page containing the 2 forms.
    You need to write some pl/sql code in the 2 forms (on the page) to retrieve the value saved and perform the action you desire. The saved value can be retrieved using the wwsto_api_session apis.
    However, both forms will not get executed at the same time unless both of them are in the same tab i.e. unless both forms are visible at the same time.
    If the forms are on different tabs, they will get executed when they are being displayed.
    But, there are ways to execute both the forms, if it really necessary, even if they are not on the same tab.
    I will be posting the an example soon in this thread.

  • Using session/cookies to send data to External Application

    How do I send data to an External Application using either the session store or cookies? I've tried both, but the data isn't visible to the External Application.
    I'm using the owa_cookie package to send a cookie from the "before page is displayed" section of a dynamic page.
    I'm also using the wwsto_api_session api to set attributes in the session store.
    Neither method allows data to be viewable in the External Application (iFS).

    Did you backup your data from that external disk using some other backup software before?
    I am also trying to figure out problems with external HD using time machine to back it up. Am not quite sure yet why it is not working right.

  • Access session parameters

    How do I access session parameters set using wwsto_api_session api in plsql procedure later in a JSP?
    I donot want to use jdbc becuase of response time issues and security.

    is it something that you want to debug at runtime and find out those values?
    Please, follow this link->
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56]
    Also look at this. This might be of more use. it explains extracting such portal parameters:
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0446f5c-fcb9-2910-e082-88becbe3ddc9|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0446f5c-fcb9-2910-e082-88becbe3ddc9]
    -kunal kotak
    Edited by: kunal kotak on Jan 12, 2009 12:16 PM

  • Why can't I use the wwsto_api_session in the portal forms dev tool

    I get errors that this api wwsto_api_session is not declared whenever I try to reference it in a pl/sql block in a form. I would like to be able to add session storage variables in the form which can be retrieved by other forms called in the same session. This is a critical need for the customer I am trying to implement this for.
    thanks

    My Fault. I had to add the User context name as Prefix, ie PORTAL30.
    By the way, this seems to be a good way to pass paramters from form to form to get around the limitations of the call forms apis that do not support paramater passing except to fields linked to base tables.

  • Portal - Session Storage API package

    I'm trying to find the session api package (wwsto_api_session) which is documented in the Oracle PDK for Portal 3.0 This package isn't listed among the plsql owned by the portal30 user in our installation. Has anyone found the package, or is there a script that needs to be run in order to generate the package?
    Any help would be appreciated.

    Seems that session is changed during logon or even if
    web page (where the servlet is located) is refreshed!In Portal 10g (and maybe even in 9.0.2.6) the Web provider session is not lost any more when the user logs in to Portal.
    PL/SQL doesn't lost the session storage data during
    logon. But is it possible to find Java session storage
    from PL/SQL session storage?No, you cannot share the session between database and Web providers. You need to find other ways to share information between portlets belonging to different providers. You can use parameter passing, or a persistent store, such as the database.
    Java session storage doesn't use domain name or
    subdomain which are mandatory for PL/SQL session
    storage.The domain, sub-domain strings are irrelevant, as long as you can uniquely identify your session variable. For example, if you want to make sure that you have a separate session variable for every portlet instance, you should include the preference path in your domain or sub-domain. In case you want to share the session store between your portlets, don't include the unique portlet ID.
    Peter

  • DAD .wwsto_api_session

    When using the session storage API (wwsto_api_session), I need to prepend the DAD to the front in order for it to be located by the PL/SQL compiler. i.e.
    DECLARE
    l_store portal30.wwsto_api_session;
    BEGIN
    l_store := portal30.wwsto_api_session.load_session('DOMAIN', 'SUB_DOMAIN');
    END;
    This is ok until I try and compile the code in another instance that doesn't use the same DAD, the code needs to be changed to remove all instances of portal30 with the other DAD, i.e. "l_store anotherportal30.wwsto_api_session;"
    This isn't a one off change as we have the problem since our development and production instances have different names.
    How do I get around this problem, I've tried Synonyms - but received an error message at compile time saying that synonyms can't be used. Also not keen on using "&&1. wwsto_api_session" in the code as the other ampersands in the source code get mixed up with this, and we "set define off" when compiling through sqlplus.
    Thanks.

    hi,
    I'm not sure why synonymn option is not working out for you !
    You need to grant 'execute' privilege for wwsto_api_session package for the user. Then create a synonymn with same name wwsto_api_session.
    Or , store the DAD information in a separate table and retrieve it.
    --Sriram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Unable to capture user comments and responder in RESPOND API

    We are building a custom application that uses Oracle Workflow underneath. The application users and responsibilities have been integrated into Workflow. Notifications are acknowledged and responded to directly from the application using the PL/SQL Notification APIs.
    When using the wf_notification.respond API with the appropriate user and comment information filled in, we are still unable to capture the responder information as well as the reponders comments. In other words, the RESPONDER and USER_COMMENT fields in the WF_NOTIFICATION is blank. However, the response does seem to go through otherwise. Do we need to set some kind of user context outside of just setting the response attributes and calling the respond API? Following is the code....
    owf_mgr.wf_notification.setattrtext(p_nid,
                   'RESULT'          ,
                   'APPROVED');
    -- This procedure then caused the WF to advance to next step
    -- Respond to notification, depends on RESULT setattrtext above
    owf_mgr.wf_notification.respond(     p_nid, -- notification id     
         p_respond_comment,     -- response_comment
    p_responder     );     --responder role
    Any help is greatly appreciated.
    Thanks,
    Raj

    If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
    Thanks, Vijay

  • SR Log Error - |  Message  : com.sap.esi.uddi.sr.api.exceptions.SRException

    Hi,
    We are getting below errors in /nwa/logs. We have our PI (7.11) and Service Registry configured on the same server. And have out CE (7.2) system connected to this service registry. Does any one has similar experience? Please let me know if you have any solution for the same.
    SR Log Error
    |  11-Nov-11  14:10:45.568
    |  Method   : getClassificationSystems()
    |  Class    : com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean
    |  ThreadID : 146
    |  Message  : com.sap.esi.uddi.sr.api.exceptions.SRException: No classification system found for ID 'QName: Namespace= http://uddi.sap.com/classification; Name=  ConfigurationFlags'
    |
    |       com.sap.esi.uddi.sr.impl.common.Utility.cs2srException(Utility.java:122)
    |       com.sap.esi.uddi.sr.impl.ejb.ServicesRegistryBean.getClassificationSystems(ServicesRegistryBean.java:242)
    |       sun.reflect.GeneratedMethodAccessor1325.invoke(Unknown Source)
    |       sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    |       java.lang.reflect.Method.invoke(Method.java:585)
    |       com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    |       $Proxy1087.getClassificationSystems(Unknown Source)
    |       com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean.getClassificationSystems(ServicesRegistrySiImplBean.java:456)
    |       sun.reflect.GeneratedMethodAccessor1324.invoke(Unknown Source)
    |       sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    |       java.lang.reflect.Method.invoke(Method.java:585)
    |       com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_WS.invoke(Interceptors_WS.java:31)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    |       com.sap.engine.services.ejb3.webservice.impl.DefaultImplementationContainer.invokeMethod(DefaultImplementationContainer.java:203)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0(RuntimeProcessingEnvironment.java:512)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:486)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:256)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:176)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWithLogging(ServletDispatcherImpl.java:112)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:70)
    |       SoapServlet.doPost(SoapServlet.java:51)
    |       javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
    |       javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    |       com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
    |       com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
    |       com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:486)
    |       com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
    |       com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
    |       com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
    |       com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:245)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
    |       com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    |       com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
    |       com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
    |       com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
    |       com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
    |       com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
    |       com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    |

    Hi,
    Refer Error:Service Registyr Configuration PI 7.11
    and http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8071b1b8-3c5c-2e10-e7af-8cadbc49d711?QuickLink=index&overridelayout=true
    Thanks,
    Chandra

  • Is There any API in receivables payment will made against closed invoices ?

    Hi ALL,
    i have requirement as below.
    i am doing AR Invoice Data Migration for Instance 11.5.5 (as a Source Instance) to the new instance R12 (as a target instance).
    Both open and closed invoices will have to be migrated from 11.5.5 to R12 to provide the drill down facility for audit purpose.
    To meet the above requirement all the open and closed invoice will be picked up from 11.5.5 ; and imported into R12..
    Subsequently, full payment will be made in R12 against all closed invoices in 11.5.5 to close those invoices by using any APIs?
    can some one explain is there any API in receivables payment will made against closed invoices.
    Thanks,
    VSR.

    Hi,
    Can you be clear on your question: You want any API to make payment against closed invoices?
    To me, You are making things complex. We can achieve the Migration of Closed invoices using following two procedures:
    Procedure: 1
    Ask Functional Guy to create a Transaction Type 'Closed Invoices' with Open to Receivables Flag not checked. +(You can uncheck Post to GL flag also, if required depending on your migration strategy)+. Status at Transaction Type if taken as 'Closed' it will be appropriate.
    Invoices migrated using this Transaction Type shall not be shown as Outstanding but will be useful for Audit.
    Procedure: 2
    Consider the amount due Original of Closed Invoices and migrate them with the amount as Amount due remaining.
    While migrating populate Receipt Method,Payment Method and Instruments useful for Automatic Receipts.
    Once Create Automatic Receipts Program is run, it will close all these invoices. Note: We require dummy bank here which points to a Clearing account.
    Automatic Receipts program is also an API.
    In the above 2 ways, we are acheiving the Goal by using Functional knowledge rather than Technical. And I think following Functional way is better and less time consuming.
    Please discuss with your Functional consultant if required. You can succeed.
    Regards,
    Sridhar

  • Error while creating new projects using api

    Hello,
    I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
    Source template ID is invalid.
    ===
    My code is as follow:
    SET SERVEROUTPUT ON SIZE 1000000
    SET VERIFY OFF
    define no=&amg_number
    DECLARE
    -- Variables used to initialize the session
    l_user_id NUMBER;
    l_responsibility_id NUMBER;
    cursor get_key_members is
    select person_id, project_role_type, rownum
    from pa_project_players
    where project_id = 1;
    -- Counter variables
    a NUMBER := 0;
    m NUMBER := 0;
    -- Variables needed for API standard parameters
    l_commit VARCHAR2(1) := 'F';
    l_init_msg_list VARCHAR2(1) := 'T';
    l_api_version_number NUMBER :=1.0;
    l_return_status VARCHAR2(1);
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(2000);
    -- Variables used specifically in error message retrieval
    l_encoded VARCHAR2(1) := 'F';
    l_data VARCHAR2(2000);
    l_msg_index NUMBER;
    l_msg_index_out NUMBER;
    -- Variables needed for Oracle Project specific parameters
    -- Input variables
    l_pm_product_code VARCHAR2(30);
    l_project_in pa_project_pub.project_in_rec_type;
    l_key_members pa_project_pub.project_role_tbl_type;
    l_class_categories pa_project_pub.class_category_tbl_type;
    l_tasks_in pa_project_pub.task_in_tbl_type;
    -- Record variables for loading table variables above
    l_key_member_rec pa_project_pub.project_role_rec_type;
    l_class_category_rec pa_project_pub.class_category_rec_type;
    l_task_rec pa_project_pub.task_in_rec_type;
    -- Output variables
    l_workflow_started VARCHAR2(100);
    l_project_out pa_project_pub.project_out_rec_type;
    l_tasks_out pa_project_pub.task_out_tbl_type;
    -- Exception to call messag handlers if API returns an error.
    API_ERROR EXCEPTION;
    BEGIN
    -- Initialize the session with my user id and Projects, Vision Serves (USA0
    -- responsibility:
    select user_id into l_user_id
    from fnd_user
    where user_name = 'SSHAH';
    select responsibility_id into l_responsibility_id
    from fnd_responsibility_tl
    where responsibility_name = 'Projects Implementation Superuser';
    pa_interface_utils_pub.set_global_info(
    p_api_version_number => l_api_version_number,
    p_responsibility_id => l_responsibility_id,
    p_user_id => l_user_id,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status);
    if l_return_status != 'S' then
    raise API_ERROR;
    end if;
    -- Provide values for input variables
    -- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
    -- by the user. In this case we select a pre-defined one.
    select lookup_code into l_pm_product_code
    from pa_lookups
    where lookup_type = 'PM_PRODUCT_CODE'
    and meaning = 'Conversion';
    -- L_PROJECT_IN: We have to provide values for all required elements
    -- of this record (see p 5-13, 5-14 for the definition of the record).
    -- Customers will normally select this information from some external
    -- source
    l_project_in.pm_project_reference := 'AGL-AMG Project &no';
    l_project_in.project_name := 'AGL-AMG Project &no';
    l_project_in.created_from_project_id := 1;
    l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
    l_project_in.project_status_code := 'UNAPPROVED';
    l_project_in.start_date := '01-JAN-11';
    l_project_in.completion_date := '31-DEC-11';
    l_project_in.description := 'Trying Hard';
    l_project_in.project_relationship_code := 'Primary';
    -- L_KEY_MEMBERS: To load the key member table we load individual
    -- key member records and assign them to the key member table. In
    -- the example below I am selecting all of the key member setup
    -- from an existing project with 4 key members ('EE-Proj-01'):
    for km in get_key_members loop
    -- Get the next record and load into key members record:
    l_key_member_rec.person_id := km.person_id;
    l_key_member_rec.project_role_type := km.project_role_type;
    -- Assign this record to the table (array)
    l_key_members(km.rownum) := l_key_member_rec;
    end loop;
    -- L_CLASS_CATEGORIES: commented out below should fix the error we get
    -- because the template does not have an assigment for the mandatory class
    -- 'BAS Test'
    l_class_category_rec.class_category := 'Product';
    l_class_category_rec.class_code := 'Non-classified';
    -- Assign the record to the table (array)
    l_class_categories(1) := l_class_category_rec;
    -- L_TASKS_IN: We will load in a single task and a subtask providing only
    -- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
    -- the task record)
    l_task_rec.pm_task_reference := '1';
    l_task_rec.pa_task_number := '1';
    l_task_rec.task_name := 'Construction';
    l_task_rec.pm_parent_task_reference := '' ;
    l_task_rec.task_description := 'Plant function';
    -- Assign the top task to the table.
    l_taskS_in(1) := l_task_rec;
    -- Assign values for the sub task
    l_task_rec.pm_task_reference := '1.1';
    l_task_rec.pa_task_number := '1.1';
    l_task_rec.task_name := 'Brick laying';
    l_task_rec.pm_parent_task_reference := '1' ;
    l_task_rec.task_description := 'Plant building';
    -- Assign the subtask to the task table.
    l_tasks_in(2) := l_task_rec;
    -- All inputs are assigned, so call the API:
    pa_project_pub.create_project
    (p_api_version_number => l_api_version_number,
    p_commit => l_commit,
    p_init_msg_list => l_init_msg_list,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status,
    p_workflow_started => l_workflow_started,
    p_pm_product_code => l_pm_product_code,
    p_project_in => l_project_in,
    p_project_out => l_project_out,
    p_key_members => l_key_members,
    p_class_categories => l_class_categories,
    p_tasks_in => l_tasks_in,
    p_tasks_out => l_tasks_out);
    -- Check the return status, if it is not success, then raise message handling
    -- exception.
    IF l_return_status != 'S' THEN
    dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
    dbms_output.put_line('Error: ret status: '||l_return_status);
    RAISE API_ERROR;
    END IF;
    -- perform manual commit since p_commit was set to False.
    COMMIT;
    --HANDLE EXCEPTIONS
    EXCEPTION
    WHEN API_ERROR THEN
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    WHEN OTHERS THEN
    dbms_output.put_line('Error: '||sqlerrm);
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    END;
    ===
    Msg_count: 1
    Error: ret status: E
    ERROR: 1: Project: 'AGL-AMG Project 1123'
    Source template ID is invalid.
    PL/SQL procedure successfully completed.

    I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

  • Error While trying to Convert a Date Value to string in POI API (Excel)

    Hi
    How can I convet a date value in excel to string value ? I am using POI API for excel sheet reading in JSP .

    Hello Esther,
    the problem seems to be that the temp folder of the target Integration Builder system can't be found:
    'The system cannot find the path specified
    at [..] FileAccess.getTempDirectory([..])'.
    You'll experience the same problem if you try a file based import or export within the Integration Builder directly.
    I would recommend to continue the search there. You could check if the environment variables (for Windows: TEMP and TMP) of the OS of the system with the target Integration Builder to an existing path. Check also if the WebAs can access this path.
    Good luck
    Frank

  • Error while invoking a public PL/SQL API in EBIZ from Sync BPEL process

    Hi,
    SOA Suite: 11.1.1.3
    I am getting the following error when I am invoking a public API in EBIZ from Oracle via a BPEL process. I am supplying the username/password via binding properties (as mentioned in other posts). Can someone point out that is the exact cause for this error please?
    SEVERE: AbstractWebServiceBindingComponent.dispatchRequest Unable to dispatch request to http://<myserver>:8006/webservices/SOAProvider/plsql/hz_party_v2pub/ due to exceptionjavax.xml.ws.soap.SOAPF
    aultException: Error occured while service was processing.
    at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:874)
    at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:707)
    at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:226)
    at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:97)
    at oracle.integration.platform.blocks.soap.AbstractWebServiceBindingComponent.dispatchRequest(AbstractWebServiceBindingComponent.java:449)
    at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.processOutboundMessage(WebServiceExternalBindingComponent.java:184)
    at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.sendSOAPMessage(WebServiceExternalBindingComponent.java:634)
    at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.request(WebServiceExternalBindingComponent.java:520)
    at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
    at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
    at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
    at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy204.request(Unknown Source)
    at oracle.fabric.CubeServiceEngine.requestToMesh(CubeServiceEngine.java:704)
    at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:246)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:935)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.handleNormalInvoke(BPELInvokeWMP.java:440)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:182)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:140)
    at com.collaxa.cube.engine.CubeEngine._performActivity(CubeEngine.java:2675)
    at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2558)
    at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1256)
    at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:188)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:285)
    at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4607)
    at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:828)
    at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:111)
    at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:147)
    at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean.syncCreateAndInvoke(BPELEngineBean.java:103)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy193.syncCreateAndInvoke(Unknown Source)
    at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.syncCreateAndInvoke(BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.java:575)
    at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:528)
    at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:482)
    at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:156)
    at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.request(CubeDeliveryBean.java:600)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy190.request(Unknown Source)
    at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.request(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:325)
    at oracle.fabric.CubeServiceEngine.request(CubeServiceEngine.java:290)
    at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
    at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
    at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
    at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy204.request(Unknown Source)
    at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1155)
    at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:767)
    at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1119)
    at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:873)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:553)
    at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:202)
    at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:166)
    at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:384)
    at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:444)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Nov 3, 2010 2:32:08 PM com.collaxa.cube.CubeLogger error
    SEVERE: <WSInvocationManager::invoke> got FabricInvocationException
    oracle.fabric.common.FabricInvocationException: javax.xml.ws.soap.SOAPFaultException: Error occured while service was processing.
    Thanks,
    Dinesh

    Hi James,
    Thanks for the quick reply.
    We've tried to call that web service from an HTML designed in Visual Studios with the same username and password and its working fine.
    But on the BPEL console, we are getting the error as mentioned.
    Also if you can tell me how to set the user name and password in the header of the parter link.I could not find how to do it.
    Thanks,
    Saurabh

  • Error while creating a Foreign Currency Receipt using Create_Cash API

    Hi,
    I am working on AR Receipts converison in R12 and trying to create cash receipts using AR_RECEIPT_API_PUB.CREATE_CASH.
    Receipt gets created successfully when the currency_code is USD. Receipt Method i am passing is 'Manual Receipt'.
    When the currency_code is not USD (EUR in my case), I am passing the values for p_exchange_rate_type and p_exchange_rate_date.
    But the API Errors out without creating the foreign currency receipt giving the Error: AR_RAPI_RCT_MD_NAME_INVALID.
    When i was trying to look at the API for this error, I dont see this error at all in the API. I see an error with the name 'AR_RAPI_RCPT_MD_NAME_INVALID' but nothing shows up for the error 'AR_RAPI_RCT_MD_NAME_INVALID' ('P' missing in 'RCPT'). I dont know where this error is getting invoked from?
    I am not sure why the API is erroring out for foreign currency receipt saying Receipt Method Name is Invalid. But it works fine for currency_code USD having the same Receipt Method Name.
    Any help would be highly appreciated.
    Thanks in advance.
    Regards,
    Kesava

    Hi Anil,
    Thankyou so much for the response. The issue has been fixed.
    There was a configuration missing on the existing bank account setup. On the Account Information Tab, ‘Multiple Currencies Allowed’ was checked, but on the Account Controls Tab, Receivables Controls/’Multiple Currency Receipts’ was not checked.
    I have ensured that both of them are checked and I am now able to create multiple currency receipts.
    Appreciate your help.
    Thanks,
    Kesava Chunduri

  • DI API error while adding AP Invoice (Using serial Nos.)

    Hi,
    Im getting the following DI API error when adding an AP Invoice which has serial numbers and i cant seem to find any logical fault in the code.
    " [PCH1.WhsCode][line: 4] , 'This entry already exists in the following tables (ODBC -2035) "
    If anybody has encountered this error and found a solution kindly let me know.

    Hi Vivek,
    Are you trying to add same document number, serial number or so on?
    "entry exist " means like "duplicate key problem", I guess.
    Basically, whscode column in PCH1 table allows duplicating.
    So, I think serial number is duplicated among same item code.
    Hope this useful for you.
    Regards,
    Hyunil Choi.

Maybe you are looking for

  • HT201412 My ipad screen remains black and show a persistent apple logo.

    My ipad screen remains black and show a persistent apple logo. Sometimes it turn on and off automatically every 5minutes. I have already restored iOS software for 3 or 4 times. I have also seen with the apple genius supporter. The problem still remai

  • Photo Sharing App

    Our company has 70 sites.  What I am looking for is an app that would allow for mulitple employees to upload photo's from their iPhones to the app and also let each of us the ability to view using one password and username.  Our goal is to upload ima

  • Lossless to lossy conversion or when does FLAC to ACC = MP3 quality?

    I will not be converting my existing lossy to lossy - MP3 to ACC but when i come across a future lossless audio file that i want to convert to ACC what bitrate is recommended for a quality imitation of MP3 audio? 

  • Help - Lights and screen are flashing--won't shut down

    Hi: I'm pretty certain this PB Ti has seen its last day. The last time I started it up, it didn't start, but kept spinning (the hard drive) up and down. Now, it won't shut down. Even a force shutdown won't kill it. If there is any power to the comput

  • Boot loader did not return any data.

    Hi, i have installed the Oracle VM Server and Oracle VM Manager in two different machines. I'm using the VM Manager to create the Virtual Machines(guest). I followed all the steps given in the Oracle VM Manager User guide 2.2. I'm using the RHEL5 as