Wwv_execute_immediate is invalid.

wwv_execute_immediate is invalid in my FLOWS_030100 schema.
When I compile it I get the following error:
Line # = 0 Column # = 0 Error Text = PLS-00753: malformed or corrupted wrapped unit.
How can I fix this package?
Thanks
Chandra.

So should I drop FLOWS_030100.WWV_EXECUTE_IMMEDIATE package?I'm not sure why it exists or how it got created.
If everything seems to be working, I'd leave it alone.
Scott

Similar Messages

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Payables Open Interface Purge completes with error "Invalid Cursor"

Hello,
I'm trying to run Payables Open Interface Purge (version 115.8) and get an invalid cursor error in the beforereport trigger. Does anyone know the cause and remedy of this? A portion of the log is below. I've looked at the cursor and everything looks fine to me.
MSG-00001: (Import_purge 1) Check control table for the purge process
MSG-00001: (Check_control_table 1) Lock the control table
MSG-00003: (Check_control_table 2) Fetch import_requests
MSG-00004: (Check_control_table 3) Check concurrent program status
MSG-00999: FUNCTION GET_REQUEST_STATUS ERROR, Reason:
MSG-00999: FND_CONCURRENT.GET_REQUEST_STATUS<-Check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: (Import_purge 1) Check control table for the purge process
MSG-00999: Delete record in control table..
MSG-00999: ORA-01001: invalid cursor
REP-1419: 'beforereport': PL/SQL program aborted.
Thank you.

I'm trying to run Payables Open Interface Purge (version 115.8) and get an invalid cursor error in the beforereport trigger. Does anyone know the cause and remedy of this? A portion of the log is below. I've looked at the cursor and everything looks fine to me.
MSG-00001: (Import_purge 1) Check control table for the purge process
MSG-00001: (Check_control_table 1) Lock the control table
MSG-00003: (Check_control_table 2) Fetch import_requests
MSG-00004: (Check_control_table 3) Check concurrent program status
MSG-00999: FUNCTION GET_REQUEST_STATUS ERROR, Reason:
MSG-00999: FND_CONCURRENT.GET_REQUEST_STATUS<-Check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: (Import_purge 1) Check control table for the purge process
MSG-00999: Delete record in control table..
MSG-00999: ORA-01001: invalid cursor
REP-1419: 'beforereport': PL/SQL program aborted.11i: Payables Open Interface Invoice Import Troubleshooting Guide (APXIIMPT) [ID 107628.1] -- 3. Open Interface Import Purge Fails with ORA-01001: Invalid Cursor
Thanks,
Hussein

I cant update nor download any applications. My password was always invalid. And other username is prompted richardca0521@yahoo.ca which is not my account. How to get rid of this apple id and use my account for download? I have registered this to itunes.

I can't update nor download any apps in itunes. Prompted invalid password, upon checking the apple id was not mine. The id was [email protected] whic is not mine. Pls. Help how to get rid of this. Thank you.

try and delete the apps and re-add them

How, can I fix my icloud account !! It keeps saying that my account is InValid/account is disabled ? How can I Inabled my account ?

My Apple ID password for icloud / I have reset it and still my Account is Disabled ?
MY icloud account for iTunes App Store ,keeps saying my account is invalid / disabled to contact " Customer Service" in the iTunes store?
How do I fix this ? I've reset my iPad truned icloud App Store off or sign out of apple then signed back in with my new ID or Password!

Goonercole wrote:
Ok if my iTunes account is disabled how do I get it enabled please
I told you in the first post:
"If changing your password does not work, then contact itunes support."

Getting ora:00904 invalid indentifier error while running i query

Hi,
I have a remote database and local database both are oracle 10gR2.Now i have written the below mentioned query in my local database and is working fine,but in case remote database it is throughing error ora:00904 invalid indentifier.
I had export the dump from remote db and import it on my local db and i tried the same and it is working fine on local after that also.
As i believe that this error usually come for column name not exist or column name or it's length or for any special character in column name of the table.But as i said it is working fine on local db but not in remote db though i am using the same dump for local and remote.
Though when i am querying the table i can able to fetch data for the any record but when i am using the below mentioned query for the same i am getting the error.As i am doing this to fecth the data for child parent related relationship.
Can any one suggest is there anything related to configaration or something else.
Please do let me know if you do want some more information on the query what i am doing inside of it.
Rgds,
Anit
Edited by: Anit A. on Sep 1, 2008 2:32 AM
Edited by: Anit A. on Sep 1, 2008 2:33 AM

WITH t
AS
SELECT decode(t.spnlevel
,3,t.u_quotesdtlid
,2,decode((select count(*)
from u_quotesdtl t2
where t2.u_quotesdtlid = t.u_quotesdtlid
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '3'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),t.u_quotesdtlid
,1,decode((select count(*)
from u_quotesdtl t2
where t2.QUOTEID = t.QUOTEID
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,t.u_quotesdtlid,decode((select count(*)
from u_quotesdtl t3
where t3.QUOTEID = t.QUOTEID
and t3.parentspn = (t3.jobgroupid||':'||t3.jobtype)
and t3.u_quotesdtlid in (select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),0,(select t4.u_quotesdtlid
from u_quotesdtl t4
,(select t1.parentspn
,t1.jobtype
,t1.jobgroupid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
) t5
where t4.spnitemcode = t5.parentspn
and t4.spnlevel = '3'
and t4.jobtype = t5.jobtype
and t4.jobgroupid = t5.jobgroupid
and t4.QUOTEID = t.QUOTEID
(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
,null,t.u_quotesdtlid) as parentquoteid
,t.u_quotesdtlid as quotesdtlid
,t.spnlevel as spnlevel
FROM u_quotesdtl t
WHERE t.QUOTEID ='som key id'
ORDER BY parentquoteid,t.spnlevel desc
select * from t;

An error has occurred:Invalid postback or callback argument in InfoView

Hi Friends,
When i try to change the parameter values and click OK button while scheduling a report in InfoView, i am getting the following error:
An error has occurred:Invalid postback or callback argument. Event validation is enabled using in configuration or in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager. RegisterForEventValidation method in order to register the postback or callback data for validation.
Till now i have not find any good solution for this. Please help in providing any better solutions to fix this.
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM
Edited by: Shivananda Puli on Aug 6, 2010 11:55 AM

This forum is for questions in regards to using the SDK within a custom application, since you are using Infoview, please post this in the applicable forum under the [Business Objects|/community [original link is broken]; section

Error while attaching document to report on Portal - Invalid selection valu

Hello All,
We are running our reports on Portal and as per the business requirement the users have to create comments or attach documents to certain amounts in certain columns and once they create the comment a document icon shows up near that amount (for example there are 3 columns Budget, actual, balance then the user have to create comment for some amounts which needs explanation) they do that from context menu Documents -> Create new Comment.
Now we want those documents to be saved on Infoprovider level and not on master data for any particular object. We have activated the flag "Characteristic is document property" on related infoobjects. We have the flag to display document icon on Infoprovider active in the web template. Now when I run the report I am able to create new comments on first two columns and when the report refreshes it shows me icon near that amount but it gives me errors on third column after the report refreshes itself. Now when I go in portal KM repository where documents are stored I do see the document that I created for the third column as well so looks like the document is getting created and being stored but the issue is when it tries to display the icon on that third column.
The error I get is this:
The initial exception that caused the request to fail was:
Invalid selection value: AttributeMember
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException: Invalid selection value: AttributeMember
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLowForced(ProviderRange.java:297)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLow(ProviderRange.java:291)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.set(ProviderRange.java:469)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.SingleMember.set(SingleMember.java:125)
at com.sap.ip.bi.km.common.assignment.AssignmentMember.isContained(AssignmentMember.java:192)
Please give some inputs if anyone is facing same problem or is anyone has worked previously with this kinda of stuff.
Thanks in advance.
Kiran

Hi!
Have you solved this problem? I have the same problem after a SPS implementation (SPS 17). The message appears when we select a single value in a DP (hierarchical filter item) that filters another one, but when I select a node it doesn't.
Before the patch implementation the apliccation worked ok.
Any idea?
Thanks in advance.
Jose

Error while updating a custom Windows Azure Diagnostics configuration xml from powershell. "Invalid update to extension reference for role"

I am attempting to upload a manually edited WADConfig xml to my VM. The WAD service is functioning correctly, I needed to add some custom WinEventLogs. The prescribed steps result in an error.
What am I overlooking?
I am following these instructions:
Step 5: Remotely install Diagnostics on your Azure Virtual Machine
azure.microsoft.com/en-in/documentation/articles/cloud-services-dotnet-diagnostics/#virtual-machine
$storage_name = "wadexamplevm"
$key = "<StorageAccountKey>"
$config_path="c:\users\<user>\documents\visual studio 2013\Projects\WadExampleVM\WadExampleVM\WadExample.xml"
$service_name="wadexamplevm"
$vm_name="WadExample"
$storageContext = New-AzureStorageContext
-StorageAccountName $storage_name -StorageAccountKey $key
$VM1 = Get-AzureVM
-ServiceName $service_name -Name $vm_name
$VM2 = Set-AzureVMDiagnosticsExtension
-DiagnosticsConfigurationPath $config_path
-Version "1.*"
-VM $VM1 -StorageContext $storageContext
$VM3 = Update-AzureVM
-ServiceName $service_name -Name $vm_name
-VM $VM2.VM
Unfortunately, I am receiving this error:
Update-AzureVM : BadRequest: Invalid update to extension reference for role: XXXXXX and reference: IaaSDiagnostics.
What's missing from the above script?

Hi,
Since Azure SDK 2.5 uses the extension model the diagnostics extension, the configuration and the connection string to the diagnostic storage are no longer part of the deployment package and cscfg. All the diagnostics configuration is contained within the
wadcfgx. The advantage with this approach is that diagnostics agent and settings are decoupled from the project and can be dynamically enabled and updated even after your application is deployed.
Due to this change some existing workflows need to be rethought – instead of configuring the diagnostics as part of the application that gets deployed to each environment you can first deploy the application to the environment and then apply the diagnostics
configuration for it. When you publish the application from Visual Studio this process is done automatically for you. However if you were deploying your application outside of VS using PowerShell then you have to install the extension separately through
PowerShell.
There PowerShell cmdlets for managing the diagnostics extensions on a Cloud Service are -
Set-AzureServiceDiagnosticsExtension
Get-AzureServiceDiagnosticsExtension
Remove-AzureServiceDiagnosticsExtension
You can use the Set-AzureServiceDiagnosticsExtension method to enable diagnostics extension on a cloud service. One of the parameters on this cmdlet is the XML configuration file. This file is slightly different from the diagnostics.wadcfgx file. You can
create this file from scratch by either following the article that you are referring to or you can modify the wadcfgx file and pass in the modified file as a parameter to the powershell cmdlet.
To modify the wadcfgx file –
Make a copy the .wadcfgx.
Remove the following elements from the Copy:
<DiagnosticsConfiguration xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<PrivateConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<StorageAccount name=" " endpoint="https://core.windows.net/" />
</PrivateConfig>
<IsEnabled>false</IsEnabled>
</DiagnosticsConfiguration>
Make sure the top of the file still has xml version and encoding –
<?xml version="1.0" encoding="utf-8"?>
Effectively you are stripping down the Wadcfgx to only contain the <PublicConfig> section and the <?xml> header. You can then call the PowerShell cmdlet along with the appropriate parameters for the staging slots and roles:
$storage_name = ‘
<storagename>’
$key= ‘<key>’
$service_name = '<servicename>'
$public_config = '<thepublicconfigfrom_diagnostics.wadcfgx>'
$storageContext = New-AzureStorageContext –StorageAccountName $storage_name –StorageAccountKey $key
Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config –ServiceName $service_name -Slot ‘Staging’ -Role ‘WebRole1’
Hope this helps !
Regards,
Sowmya

Error while deploying web role - Invalid application runtime - a runtime component is missing:/base/x64/IISConfigurator.exe

I have Azure SDK 2.5 installed and when I try and publish my web role from VS 2013, it fails. When I manually upload the package and config through the Azure Portal I get the error: "Invalid application runtime - a runtime component
is missing:/base/x64/IISConfigurator.exe".
I have tried uninstalling and re-installing the Azure SDK with no change in the error.
Any ideas how I can troubleshoot this?

I uninstalled the SDK, and tried to create a new cloud servce using the WCF service project template. The new project still gives me the same error:
The file provided is not a valid service package. Detailed error code: WCFServiceWebRole1 Invalid application runtime - a runtime component is missing:/base/x64/IISConfigurator.exe.

Error while deploying a Cube * OLAPSYS packages invalid

Hi,
I'm really new with OWB, I'm using a Oracle 10.2.0.4, and OWB 11gR1 (Windows Server).
I'm having a problem while trying to deploy a Cube (a simple cube, that I made to try to understand how this works).
The error is:
ORA-04063: package body "OLAPSYS.CWM2_OLAP_MANAGER" has errors
ORA-06508: PL/SQL: could not find program unit being called: "OLAPSYS.CWM2_OLAP_MANAGER"
ORA-06512: at "OLAPSYS.CWM2_OLAP_CUBE", line 127
ORA-06512: at line 2
I check the OLAPSYS schema I found a lot of package (including CWM2_OLAP_MANAGER) Invalid, I try to compile them but without success, and I didn't see what is missing (cause it is encrypted).
I didn't Installed this database, so I don't know what they did to upgrade it from 10.2.0.1 to 10.2.0.4, but:
There is a way to re-create or reload all this packages?
I really appreciate your help!
Thanks
Erick Dennis.

Hi,
I'm having problems to deploy this cube (this was the origin of my problem), when I change it to "Deploy Data Object Only", It don't generate code and the cube is not created. This is what I get:
-- Product : Oracle Warehouse Builder
-- Generator Version : 11.1.0.6.0
-- Created Date : Wed May 12 08:41:59 CST 2010
-- Modified Date : Wed May 12 08:41:59 CST 2010
-- Created By : edennis
-- Modified By : edennis
-- Generated Object Type : TABLE
-- Generated Object Name : FACT_TMP_SALDOS
-- Comments :
-- Copyright © 2000, 2007, Oracle. All rights reserved.
WHENEVER SQLERROR EXIT FAILURE;
Ideas?
Thanks for your help!

Invalid connection cache name error while invoking a bpel process

while invoking a service via DB adapter ,it gives invalid connection cache name orabpel 00000 error. the JCA connection is set properly and its reffered via jndi name in code. i tested the connection in EM and its working fine.
Few transactions have passed and thereafter i'm getting this error.
is there any parameter that needs to be set. Someone can help here!!

Have got the same problem. Scenario at my end is little different though.
I am trying to invoke a BPEL process from an ESB Service.
I am trying to look into it..
However, would be grateful, if someone can give some insight into this since many are running into this issue without being able to fix.
Ashish.

ITunes v10.6.1.7 "Copying files failed. The File name was invalid or too long."

I'm trying to organize my music files using iTunes 10.6.1.7 and I keep getting the error message "Copying files failed. The File name was invalid or too long."
I've got music folders by artist in both the iTunes Music folder and the iTunes Media/Music folder. When I add certain files by drag/drop they sometimes get lost and I don't want that to happen anymore. I used to just consolidate my music files using the File/Library/Organize Library option and that worked, however now when I do that, I get the error message.
I'm a novice and the only online stuff I see is both confusing and refers to earlier versions of iTunes.
My concern is that I have heard that people lose entire libraries of their music when they trry to fix things like this and I don't want that. If this is of any importance, I have several files called iTunes library and temp library. I have no idea what that all means but I'm scared to death of it.
Also, I can't get to the "re-organize library" link at all. It won't let me.
One thing that be of some interest is that when I pull up the properties of the music and media/music files they are marked "read only" I'm also afraid to touch that!
Please help and please know that I am a dummy. Be kind and be clear. Step by step would be great, with images even better. Thanks.

Perhaps nobody knows the answer? We're fellow users here answering questions in our free time when we think we've something useful to contribute.
You can choose to *Consolidate selected tracks* with a right-click menu. Perhaps if you can identify a specific track that won't consolidate and examine the full path to the file & the path that iTunes would create when it consolidates the problem might become apparent. For example iTunes may not be able to move files if the source or destination path length exceeds 255 characters.
tt2

'The folder path "C:" contains an invalid character.' ERROR AS I INSTALL iTunes

hi
first of all, merry xmas to all that celebrate! i hope you had/have a memorable day!
and wishing everyone the very best for the new year.
Now, I have a problem when I try to install iTunes on my computer. I'm running:
- Windows Vista (Home Basic)
- iTunes 10.5.2.11
i have sufficient hard-drive space and sufficient ram. its definetly NOT from that. I originially DID HAVE iTunes already installed on my computer, but I was frequently having problems with establishing a connection through my iPhone 4. So I thought it would be a good idea to delete it and try downloading a new version, then install it fresh!
I have some computer skills and knowledge, and i know how "most" things work and run. But now I am totally stuck. I run the iTunes software to be installed, but the installer keeps giving me an error message and NOT installing. I've done all the easy and required steps after I deleted the original version of iTunes from my computer, and now I need help from someone who really knows their stuff in IT and computer software. I have a feeling it may be a string of codes that are corrupt or significantly different to what they should be, but thats just my guess! cos like i already said, ive tried all the common fixes already but have been unsuccessful thus far. Some of the things I did were:
- Restart the computer, re-boot, login to Windows, run the iTunes installation
- Turn off the computer, wait 10 minutes, re-boot and then run the iTunes installation
- Delete ALL the "Apple" company software that was still installed on my computer (QuickTime, iPhone Utility, iPod, Bonjour, etc etc)
- Confirm my "User Account Control" is OFF
- Run the iTunes installation file from my secondary windows login account (which has "Administrator" privilages)
- Create a new windows login account, turn off the UAC (User Account Control protection), then try installing iTunes
- Run disk-error checks on my hard-drives incase there are missing/corrupt/misplaced files that needed repair
etc etc etc etc
Nothing worked! THIS BELOW IS EXACTLY THE PROBLEM I KEEP GETTING WHEN I DOUBLE-CLICK ON THE iTUNES INSTALLER:
- Double click on the iTunes install icon
- The "Trusted File Security Warning/Confirmation" window appears, requesting I confirm to Run or Cancel the software installation. I click on "Run"
- A horizontal grey bar appears in the middle of the screen, and quickly fills up green
- Then a small installation windows appears (Windows Installer) that writes "Preparing to Install". Then it very fast writes a couple different sentences (which is normal), specifically the sentences are "Performing installation checks" and "Checking spacing requirements".
- immedietly after the previous step, another window appears and I hear the "error" audio tone. The ERROR MESSAGE has the Yellow Triangle logo with an exclamation mark in the middle, and beside it displays the following text (and Ive attatched the screen shot too):
THE FOLDER PATH "C:" CONTAINS AN INVALID CHARACTER
then below this message theres the "OK" button which I have no choice but to click on. then the next window that appears is as follows (see screenshot), and it reads:
iTunes Installer Completed
The installer encountered errors before iTunes could be configured.
Errors occured during installation. Your system has not been modified.
Please run the installer again, or click Finish to exit
Please I beg you guys to help me, I will be extremely grateful for ALL and ANY advice/tips/assistance/solutions I receive. And would owe you one for sure!!
Please feel free to write your opinions and thoughts on what I could do different, as Ive used up all my knowledge regarding the matter, and have seriously hit a brick wall now.
Thanks so so so much, and once again I wish everyone the absolute very best!
regards.
PS. Replies can be posted in this thread, otherwise even sent to me via email if you wish to do otherwise. My email address is: [email protected]
cheers

Resolution:
Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder. (You will need to un-check the folder options box in windows explorer for "Hide
protected operating system files" to see it)
If the hidden %appdata% folder exists, delete it.
Proceed to uninstall the App-V client
After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum).

Why can't i download adobe reader on my windows vista. Error message is invalid key

I can not download Adobe reader. The installation begins, but then I get the message that the key is invalid. I don't know what means or how to correct it. How can I get a vaid key.

That is a problem caused by Microsoft or one of their recent updates. Here is the solution
in the Windows Explorer address bar type %APPDATA%
on the right-hand side double-click on the Microsoft folder
now look for a folder named Crypto; delete it, or rename it to something like Crypto-old
If you need more detailed help, tell us your Windows version.

Wwv_execute_immediate is invalid.

Similar Messages

Maybe you are looking for