Wxtract and Delta Queues

Hi All
In order to patch our ECC system one of the pre requisites is to clear all the BW Extract & Delta Queues.
I am aware that Logistics uses these Queues and I can clear them from LBWE.
How can I tell if any other areas of ECC also use these queues.
Can you tell which modules do or can I looks for certain processes on ECC.
All help most appreciated
HKF.

Hi,
These data source use delta queue to send data to the BW and not the extraction queue.
There are two sets of data sources in BW ...for one which the delta is maintained through the extaction queue like LO data sources and another set like FI data source which use the delta queue directly and there delta is trigerred by scheduling an infopackage in BW...like FI-GL data sources
For FI data sources delta records will get fetch directly from the underlying tables when the infopackage is scheduled in BW and will delta queue to store the delta records for the repeat of the delta.
But in first case i.e. LO data sources the delta is generated by the R/3 system and is sent to the delta queue at regular interval by controlled jobs.
There are lot of links which tells you the difference between the FI and LO data sources and you can search for them...but they all contain the same thing which I have mentioned.
Thanks
Ajeet

Similar Messages

Diff between update queue and delta queue

hi all
can anyone tell me wats is the diff between update queue and delta queue? wats is delta queue and update queue?
wats are the possible system generated errors and custom generated errors?
Thanks,
Shreya

Hi Shreya,
Update queue(LBWQ) comes into the picture when you choose Queued Delta for the Datasource. the data first comes to the Update queue and than goes to the Delta queue, however if you have choosen Direct Delta than the posted record will directly go to the Delta queue(RSA7).
Here is the URLS for Roberto's weblog to understand the whole LO-Extraction process.
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Hope it helps you!!!!
Regards,
Amit
Pls do not forget to assign points, if helpful.

Clearing Extraction and Delta Queues

Hi Guys,
I have a quite a problem. I am needed to clear Extraction and Delta Queues, but because there are users in the system they just keep repopulating once i have cleared them. Now these queues have to be cleared for a SAP Upgrade and the Upgrade wont continue until both are clear.
I was wondering is there a way to clear both queues with users in the system making changes?
A quick response would be greatly appreciated!
Thanks in Advance,
Nick

Hi,
There is on program"RMBWV*"
where * is equal to application.
It is used to move the entries from extraction queue to delta queue.
After everthing is there in the rsa7,then you need
to run the info package untill the entries become "zero" in rsa7.
May be try to run more than once.
Note:-You need to take business down time ie lock all the user
so that during that time no one update any data.
Hope this i shelpful.
Thanks,
Saveen Kumar

Difference between Direct delta and delta Queue

Hi,
1.ease explain me the concept of Direct delta and delta queue in LO extraction
2.Why set up tables are used and initially why the data is deleted for th setup tables.
3.Please explain me the LO extraction with an example.
Thanks
Alok

Dear Aloka,
1.
Direct delta:
transactional data or application posting will be directly available in the delta queue table with out any intermediate tables. then that data will be extracted from r/3 to bw.
Each document posting is directly transferred into the BW delta queue
each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
Queued delta:
first the data posting will available in the extraction queue table. then there periodic job run take that data to queued delta table.
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
2.
Setup tables are used for Full/Initial Update.
Instead of pulling data from DB Tables directly, we r filling Setup tables and extracting data from the Setup tables, which dont have performance impact on DB Tables.
Setup tables are application specific.
It is cautious method to delete Setup tables before filling it for a specific DataSource.
3.
Re: LO-Cockpit V1 and V2 update
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
Regards,
Ram.

Difference Between Update Queue and Delta Queue

Hi Experts ,
Could u brief out the difference between Extraction Queue , Update Queue and Delta Queue ?

Hi
a) Serialized V3 Update(If you set this as your delta mode then data will populated into extraction queue tables)
This is the conventional update method in which the document data is collected in the sequence of attachment and transferred to BW by batch job.The sequence of the transfer does not always match the sequence in which the data was created.
b) Queued Delta(If you set this as your delta mode then data will be populated into update queue tables)
In this mode, extraction data is collected from document postings in an extraction queue from which the data is transferred into the BW delta queue using a periodic collective run. The transfer sequence is the same as the sequence in which the data was created
Delta queue is a table which collects data from extraction queue/update queue tables based on the frequency you have set(daily/hourly etc)..from these tables we will get delta records to bw with infopackage delta run..
Hope it helps
Thanks
Teja

ODS Delta Process, DataSource and Delta Queue

Hi to all,
loading data from a SAP source system into SAP BW 7.0 via generic 3.x datasource causes problems.
Here is a short description:
The data flow is from a source table using a generic extractor into a target ODS in full update mode.
Update rules should move data from table structure into ODS structure in this way:
Source table structure
CustKey1     Key2
13386          C23
13386          B14
13387          A13
13387          E25
ODS structure
CustKey1     col1     col2
13387          A13     E25
This works pretty well - as long as all records with the same CustKey1 are transfered in the same data package. Data Browser (SE16) shows the situation in ODS-"New data" view (data is not activated):
Request    Data_packet_number     Data_record_number      CustKey1
112           000003                  1.061              0000013386
112           000004                      1              0000013386
112           000004                      2              0000013387
There are two records for CustKey1 0000013386 with
data record 1.061 in data packet 000003   and
data record       1 in data packet 000004.
The obove constellation is the cause for errors in the ODS Delta Queue and subsequent data processing.
I think there may be one solution to solve the problem by changing the Delta Process of the Data Source.
The properties are:
- Record type: Full, delta, before, after images
- Delta type: Delta from delta queue or from extractor
- Serialization: No serialization, serialization of request, serialization of data packages
But how can I change these settings? Transactions RSA2 RSO2 RSO6 RSO8 don't do this.
What is the right delta process to use?
I have tried changing the delta process generating several 3.x datasources with the following delta processes (see table RODELTAM)
- " " (Full-upload)
- AIE
- ADD
Unfortunately with no effect.
Who can help?
Regards
Josef
Edited by: Josef L. on Mar 20, 2009 7:44 PM

hi venkat,
whenever you load a delta from ods to cube , whatever the data changed in ods since last delta will be updated, hence from you case, both req1 and req2 will be loaded to cube.
Assign Points if useful
Ramesh

How to delete the data in update queue and delta queue for Queued delta?

Dear BWers,
How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help.
Thanks
Raj

Hi Raj,
I think you need some ground work for the LO extraction same as others here. Please read the 3 blogs expliciltly created for LIS by Robert Negro.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
As well, the OSS 380078 would clear your doubts reagrding the the BW QUEUE mainatinance.
Please let me know if these material has been suffecient enough.
regarda,
raj

Regarding LIS Extract Structure and Delta Queues

Hi All,
We are extracting data using 2LIS_01_S001. But we are unable to pull Delta loads. When we verified we found that the structure (Fields)of the Delta queues are not in same order as S001 table. So, we modified the structures of delta queues using the access key. Now the order of fields in S001, S001BIW1 and S001BIW1 are all same. Till now I was unable to load the deltas for the data source. Now my doubt is should I have to do the LIS setups again (Statistical Information Setup)or can I do a Full Load and do deltas directly???

Hi,
You have to setup the tables once again.If your requirement is to load the customer data donot depend on LIS because there are lot of problems with this LIS.SAP is not recommending this LIS.Simply load customer attribute data and load transaction LOS also.
This is a better option.
Hope this helps.
Assign points if useful.
Regards,
venkat

Deleted Delta Queue and setup tables on R/3 side

Hi Gurus,
We are in the process of BW upgrade to NW 2004s. There was some confusion and I deleted the delta Queues in RSA7 (delete button on top) and setup tables too.
Now we have refilled the setup tables but nothing is appearing in RSA7 now.
Do we need to reinstall datasources and then replicate in BW?
Please help.
Regards,
Anil

Hi,
You'll need to initialize the datasources again for anything to show up in RSA7.
Now are the R3 users also locked out on the R3 side ? Are any Master data being converted, created ?
If that's the case and users are doing any transactions on the R3 side, you've basically lost the delta data from when you deleted the delta queues to the time you are going to run the inits. There's no way excpet a full update for you to recover all that data. So if R3 side processing is happening as usual, would suggest you start planning on getting the lost data back into BW post upgrade.
Cheers,
Kedar

Direct Delta, Queued and Unseralized V3

HI
FOR IM datasources, BF and UM, the guide mentions Direct Delta as the preferred selection. How do we decide this?
Also for LO cockpit DS in SD, what selection is chosen?
Thanks
Harie

hi Harie,
take a look oss note 505700 -LBWE: New update methods as of PI 2002.1 and 500426 - BW extraction SD: alternatives to V3 updating
hope this helps.
505700
Symptom
Up to and including PI 2001.2 or PI-A 2001.2, only the "Serialized V3 update" update method was used for all applications of the logistics extract structures Customizing Cockpit. As a result of the new plug-in, three new update methods are now also available for each application.
The "Serialized V3 update" update method is no longer offered as of PI 2003.1 or PI-A 2003.1. Between installing PI 2002.1 or PI-A 2002.1 and installing PI 2003.1 or PI-A 2003.1, you should therefore switch to one of these new methods in all applications offering alternative update methods.
Rather than describing an error, this note helps you make the right selection of update methods for the applications relating to the logistics extract structures Customizing Cockpit.
Read this note carefully and in particular, refer to the essential notes required for some applications when using the new update methods.
You will also find more detailed information on the SAP Service Marketplace at: http://service.sap.com/~sapidb/011000358700005772172002
Or:
http://service.sap.com/BW > SAP BW InfoIndex > Delta Handling > New Update Methods in Logistics Extraction with PI2002.1 2.0x/3.0x (ppt)
Other terms
V3 update, V3, serialization, TMCEXUPD
Reason and Prerequisites
New design
Solution
1. Why should I no longer use the "Serialized V3 update" as of PI 2002.1 or PI-A 2002.1?
The following restrictions and problems with the "serialized V3 update" resulted in alternative update methods being provided with the new plug-in and the "serialized V3 update" update method no longer being provided with an offset of 2 plug-in releases.
a) If, in an R/3 System, several users who are logged on in different languages enter documents in an application, the V3 collective run only ever processes the update entries for one language during a process call. Subsequently, a process call is automatically started for the update entries from the documents that were entered in the next language. During the serialized V3 update, only update entries that were generated in direct chronological order and with the same logon language can therefore be processed. If the language in the sequence of the update entries changes, the V3 collective update process is terminated and then restarted with the new language.
For every restart, the VBHDR update table is read sequentially on the database. If the update tables contain a very high number of entries, it may require so much time to process the update data that more new update records are simultaneously generated than the number of records being processed.
b) The serialized V3 update can only guarantee the correct sequence of extraction data in a document if the document has not been changed twice in one second.
c) Furthermore, the serialized V3 update can only ensure that the extraction data of a document is in the correct sequence if the times have been synchronized exactly on all system instances, since the time of the update record (which is determined using the locale time of the application server) is used in sorting the update data.
d) In addition, the serialized V3 update can only ensure that the extraction data of a document is in the correct sequence if an error did not occur beforehand in the U2 update, since the V3 update only processes update data, for which the U2 update is successfully processed.
2. New "direct delta" update method:
With this update mode, extraction data is transferred directly to the BW delta queues every time a document is posted. In this way, each document posted with delta extraction is converted to exactly one LUW in the related BW delta queues.
If you are using this method, there is no need to schedule a job at regular intervals to transfer the data to the BW delta queues. On the other hand, the number of LUWs per DataSource increases significantly in the BW delta queues because the deltas of many documents are not summarized into one LUW in the BW delta queues as was previously the case for the V3 update.
If you are using this update mode, note that you cannot post any documents during delta initialization in an application from the start of the recompilation run in the OLTP until all delta init requests have been successfully updated successfully in BW. Otherwise, data from documents posted in the meantime is irretrievably lost.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) A maximum of 10,000 document changes (creating, changing or deleting documents) are accrued between two delta extractions for the application in question. A (considerably) larger number of LUWs in the BW delta queue can result in terminations during extraction.
b) With a future delta initialization, you can ensure that no documents are posted from the start of the recompilation run in R/3 until all delta-init requests have been successfully posted. This applies particularly if, for example, you want to include more organizational units such as another plant or sales organization in the extraction. Stopping the posting of documents always applies to the entire client.
3. The new "queued delta" update method:
With this update mode, the extraction data for the affected application is compiled in an extraction queue (instead of in the update data) and can be transferred to the BW delta queues by an update collective run, as previously executed during the V3 update.
Up to 10,000 delta extractions of documents to an LUW in the BW delta queues are cumulated in this way per DataSource, depending on the application.
If you use this method, it is also necessary to schedule a job to regularly transfer the data to the BW delta queues ("update collective run"). However, you should note that reports delivered using the logistics extract structures Customizing cockpit are used during this scheduling. There is no point in scheduling with the RSM13005 report for this update method since this report only processes V3 update entries. The simplest way to perform scheduling is via the "Job control" function in the logistics extract structures Customizing Cockpit. We recommend that you schedule the job hourly during normal operation - that is, after successful delta initialization.
In the case of a delta initialization, the document postings of the affected application can be included again after successful execution of the recompilation run in the OLTP, provided that you make sure that the update collective run is not started before all delta Init requests have been successfully updated in the BW.
In the posting-free phase during the recompilation run in OLTP, you should execute the update collective run once (as before) to make sure that there are no old delta extraction data remaining in the extraction queues when you resume posting of documents.
If you want to use the functions of the logistics extract structures Customizing cockpit to make changes to the extract structures of an application (for which you selected this update method), you should make absolutely sure that there is no data in the extraction queue before executing these changes in the affected systems. This applies in particular to the transfer of changes to a production system. You can perform a check when the V3 update is already in use in the respective target system using the RMCSBWCC check report.
In the following cases, the extraction queues should never contain any data:
- Importing an R/3 Support Package
- Performing an R/3 upgrade
- Importing a plug-in Support Packages
- Executing a plug-in upgrade
For an overview of the data of all extraction queues of the logistics extract structures Customizing Cockpit, use transaction LBWQ. You may also obtain this overview via the "Log queue overview" function in the logistics extract structures Customizing cockpit. Only the extraction queues that currently contain extraction data are displayed in this case.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) More than 10,000 document changes (creating, changing or deleting a documents) are performed each day for the application in question.
b) In future delta initializations, you must reduce the posting-free phase to executing the recompilation run in R/3. The document postings should be included again when the delta Init requests are posted in BW. Of course, the conditions described above for the update collective run must be taken into account.
4. The new "unserialized V3 update" update method:
With this update mode, the extraction data of the application in question continues to be written to the update tables using a V3 update module and is retained there until the data is read and processed by a collective update run.
However, unlike the current default values (serialized V3 update), the data is read in the update collective run (without taking the sequence from the update tables into account) and then transferred to the BW delta queues.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method since serialized data transfer is never the aim of this update method. However, you should note the following limitation of this update method:
The extraction data of a document posting, where update terminations occurred in the V2 update, can only be processed by the V3 update when the V2 update has been successfully posted.
This update method is recommended for the following general criteria:
a) Due to the design of the data targets in BW and for the particular application in question, it is irrelevant whether or not the extraction data is transferred to BW in exactly the same sequence in which the data was generated in R/3.
5. Other essential points to consider:
a) If you want to select a new update method in application 02 (Purchasing), it is IMPERATIVE that you implement note 500736. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBV302 report.
b) If you want to select a new update method in application 03 (Inventory Management), it is IMPERATIVE that you implement note 486784. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBWV303 report.
c) If you want to select a new update method in application 04 (Production Planning and Control), it is IMPERATIVE that you implement note 491382. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBWV304 report.
d) If you want to select a new update method in application 45 (Agency Business), it is IMPERATIVE that you implement note 507357. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBWV345 report.
e) If you want to change the update method of an application to "queued delta", we urgently recommended that you install the latest qRFC version. In this case, you must refer to note 438015.
f) If you use the new selection function in the logistics extract structures Customizing Cockpit in an application to change from the "Serialized V3" update method to the "direct delta" or "queued delta", you must make sure that there are no pending V3 updates for the applications concerned before importing the relevant correction in all affected systems. To check this, use transaction SA38 to run the RMCSBWCC report with one of the following extract structures in the relevant systems:
    Application 02:   MC02M_0HDR
    Application 03:   MC03BF0
    Application 04:   MC04PE0ARB
    Application 05:   MC05Q00ACT
    Application 08:   MC08TR0FKP
    Application 11:   MC11VA0HDR
    Application 12:   MC12VC0HDR
    Application 13:   MC13VD0HDR
    Application 17:   MC17I00ACT
    Application 18:   MC18I00ACT
    Application 40:   MC40RP0REV
    Application 43:   MC43RK0CAS
    Application 44:   MC44RB0REC
    Application 45:   MC45W_0HDR.
You can switch the update method if this report does return any information on open V3 updates. Of course, you must not post any documents in the affected application after checking with the report and until you import the relevant Customizing request. This procedure applies in particular to importing the relevant Customizing request into a production system.
Otherwise, the pending V3 updates are no longer processed. This processing is still feasible even after you import the Customizing request using the RSM13005 report. However, in this case, you can be sure that the serialization of data in the BW delta queues has not been preserved.
g) Early delta initialization in the logistics extraction:
As of PI 2002.1 and BW Release 3.0B, you can use the early delta initialization to perform the delta initialization for selected DataSources.
Only the DataSources of applications 11, 12 and 13 support this procedure in the logistics extraction for PI 2002.1.
The early delta initialization is used to admit document postings in the OLTP system as early as possible during the initialization procedure. If an early delta initialization InfoPackage was started in BW, data may be written immediately to the delta queue of the central delta management.
When you use the "direct delta" update method in the logistics extraction, you do not have to wait for the successful conclusion of all delta Init requests in order to readmit document postings in the OLTP if you are using an early delta initialization.
When you use the "queued delta" update method, early delta initialization is essentially of no advantage because here, as with conventional initialization procedures, you can readmit document postings after successfully filling the setup tables, provided that you ensure that no data is transferred from the extraction queue to the delta queue, that is, an update collective run is not triggered until all of the delta init requests have been successfully posted.
Regardless of the initialization procedure or update method selected, it is nevertheless necessary to stop any document postings for the affected application during a recompilation run in the OLTP (filling the setup tables).
500426
Symptom
With the BW extraction with the structures of the logistics extract structures customizing cockpit there is only V3 updating as an update method up to plug-in release PI-2001.2.
To make every possible effort to ensure the transfer of document postings to BW in the correct sequence the parameter "SERIAL" was added to the V3 collective update (refer also to note 385099). If this parameter is set at the start of the V3 collective update, the update data is read and processed by the database in the sequence of its creation time.
However, this procedure gives rise to the following major performance problem:
If documents are entered in an application in an R/3 System by several users that are logged on in different languages, the V3 collective run will only ever process the update entries for one language in a process call. A process call is then started automatically for the update entries of the documents which were entered in the next language. Accordingly, during the serialized V3 update only update entries which were generated in direct chronological sequence and with the same logon language can ever be processed. If the language changes in the sequence of the update entries, the V3 collective update process is terminated and restarted with the new language.
During every restart, the update table VBHDR is read sequentially on the database. If there are very many entries in the update tables, this can cause the processing of the update data taking so much time that more new update records are generated simultaneously than are processed.
Furthermore, the serialization is not 100% guaranteed in all scenarios when the V3 update is used, as described also in note 384211.
From plug-in PI 2002.1 the option is offered for the most important applications of the logistics extract structures customizing cockpit of selecting between several alternative update methods.
The serialized V3 update is no longer provided from plug-in PI-2003.1.
The modification provided here enables you to use the new update methods for the applications 11, 12 and 13 as early as from patch 5 of PI 2001.2 or PI-A 2001.2.
The following update methods are offered:
direct delta (update mode A):
With this update mode the extraction data is transferred directly into the BW delta queues with every document posting. Every document posting with delta extraction becomes exactly one LUW in the corresponding BW delta queues.
If you use this method it is therefore no longer necessary to regularly schedule a job to transfer the data to the BW delta queues. Otherwise there will be a substantial increase in the number of LUWs per DataSource in the BW delta queues since, unlike previously, with V3 updating the deltas of many documents are grouped together to form an LUW in the BW delta queues.
Furthermore you should note when using this update mode that during delta initialization in an application, from the start of the recompilation run in the OLTP no document postings may be made until all delta Init requests have been updated successfully in BW. Otherwise data in documents posted in the interim will be irretrievably lost.
queued delta (Update mode B):
With this update mode the extraction data of the affected application is collected in an 'extraction queue' instead of in the update dataand can be transferred via an update collective run into the BW delta queues, as is already the case during V3 updating.
For each DataSource,1000 delta extractions are summarized by documents of the application to form an LUW in the BW delta queues.
If you are using this method it is thus also necessary to regularly schedule a job for transferring the data to the BW delta queues. This scheduling is carried out with the same report which is used when you use the V3 updating (RMBWV311, RMBWV312 or RMBWV313). You are recommended to schedule the job on an hourly basis in normal operation - that is following the successful delta initialization.
In the case of a delta initialization the document postings of the affected application can be included again after the successful execution of the recompilation run in the OLTP (OLI7BW, OLI8BW or OLI9BW) if you ensure that the update collective run is not started before all delta Init requests are updated successfully in BW.
In the posting-free phase during the recompilation run in the OLTP - as previously - the update collective run should be be run once successfully to ensure that there is no old delta extraction data in the extraction queues during the reinsertion of the document posting.
Using transaction SMQ1 and the queue names MCEX11, MCEX12 or MCEX13 you can get an overview of the data in the extraction queues.
unserialized V3 update (update mode C):
With this update mode the extraction data of the affected application is written to the update tables as before with the aid of a V3 update module and kept there until the data is read and processed by an update collective run.
However, unlike the current default values (serialized V3 update), in the update collective run the data is read and transferred to the BW delta queues without taking into account the sequence from the update tables. This is why the performance problem described above does not arise in this case.
This method should only be used if, due to the design of the cubes or ODS objects in the BW system, it does not matter whether the data is transferred to BW in exactly the same sequence in which it was generated in the OLTP System.
Other terms
V3 update
Reason and Prerequisites
Additional desired functions.
Solution
If you already want to use one of the above-described new update methods in the applications 11, 12 or 13 with PI 2001.2 or PI-A 2001.2, you can do this with the corrections given here. However, it is vital that you bear in mind the following points:
1. The corrections described here consist ofa modification which is not included in any PI Support Package. Check whether the described corrections are necessary. When you import a PI Support Package, parts of these corrections may be overwritten. When importing the PI Support Package ensure that you have got all of these corrections (SPAM/SPAU).
2. Only copy these modifications in consultation with SAP logistics extraction development.
3. The corrections presented here should only ever be regarded as an interim solution. The functions are only fully available with PI 2002.1 and PI-A 2002.1. You should also consider the option of upgrading soon to PI 2002.1 or PI-A 2002.1.
Note also that if the update methods of the applications 11, 12 and 13 are changed prematurely, other applications can still only offer the serialized V3 update. The performance problem described above continues to apply to these applications. It should, however, be significantly reduced by the absence of the modules of applications 11, 12 and 13.
4. The corrections described here necessitate the importing of Support Package 5 of PI 2001.2 or PI-A 2001.2. The corrections described here are not possible in a lower plug-in release or Support Package status since the functions of the new update methods are not available.
5. If you want to change the update method of an application to "queued delta", you are strongly recommended to first install the most current qRFC version. Refer to note 438015.
6. If you use the corrections below to change from the update method "Serialized V3" to "Direct delta" or "queued delta" in an application, you must ensure that before the corresponding corrections are imported there are no more open V3 updates for the corresponding applications in all affected systems. To check this, you can execute the report RMCSBWCC in the corresponding systems with transaction SA38 with one of the following extract structures:
    Application 11:   MC11VA0HDR
    Application 12:   MC12VC0HDR
    Application 13:   MC13VD0HDR.
The change is possible if you are not referred to open V3 updates. Of course, no document postings should be made in the affected application after the check with the report until the transfer of the corrections. This procedure applies in particular to the importing of the corrections into a production system.
7. If you are already using the update mode "queued delta" with one of the applications 11, 12 or 13 with the corrections stored here before PI 2002.1 and if you want to make changes to the extract structures in this phase via the cockpit, you should ensure that there is no data in the extraction queues before you execute these changes in the affected systems. In particular this applies to the transportation of changes into a production system. In this case it is not sufficient to execute the check report RMCSBWCC recommended in the cockpit and to eliminate the problem areas specified there.
Below we describe how you can check and ensure this condition.
8. When you import PI 2002.1 the changes made here will always be ineffective and you will get the update method "serialized V3" again as the preset update method.
If you have already changed to a different update method in advance in one of the applications 11, 12 or 13 via the corrections stored here, you must consider the following points during the plug-in upgrade to PI 2002.1 or PI-A 2002.1:
a) Before the upgrade you must ensure that there is no more data in the extraction queues MCEX11, MCEX12 and MCEX13. Otherwise it may no longer be possible to process the data, which may have to be deleted from the queues, due to an extract structure enhancement with the new plug-in. You can do this by starting the collective update report (RMBWV311, RMBWV312 or RMBWV313) and by subsequently checking the extraction queues using transaction SMQ1.
b) After the upgrade you must ensure that before the inclusion of new document postings, the update method of the corresponding application used in advance by the corrections specified here is also set in the cockpit of the logistics extraction (LBWE), and that this setting is transported into all clients of the affected systems.
Note in this context that the corrections specified here change the update method so that it is client-independent. The new functions in the cockpit of the logistics extraction from PI 2002.1 or PI-A 2002.1 then allow the client-specific selection of the update methods.
9. If you want to use the update method "direct delta" in application 11 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000373868" given below for the include MCEX11TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
10. If you want to use the update method "direct delta" in application 12 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000373868" given below for the include MCEX12TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
11. If you want to use the update method "direct delta" in application 13 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000373868" given below for the include MCEX13TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
12. If you want to use the update method "queued delta" in application 11 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000380083" given below for the include MCEX11TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
13. If you want to use the update method "queued delta" in application 12 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000380083" given below for the include MCEX12TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
14. If you want to use the update method "queued delta" in application 13 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000380083" given below for the include MCEX13TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
15. If you want to use the update method "unserialized V3 update" in application 11 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000380084" given below for the include MCEX11TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
16. If you want to use the update method "unserialized V3 update" in application 12 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000380084" given below for the include MCEX12TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).
17. If you want to use the update method "unserialized V3 update" in application 13 instead of the serialized V3 update, copy the changes specified in the correction instructions "0120061532 0000380084" given below for the include MCEX13TOP using the ABAP editor (transaction SE38) (these guidelines can be used both for PI 2001.2 and PI-A 2001.2).

Filtering Setup-Table and same filtering for Delta-Queue needed

Dear All,
I'm looking for the best solution to do the filtering for the delta-queue.
In program RMCVNEUA I'm filtering (excluding specific SalesOrg) data for the setup-table creation. I'm loading these data to the BW system.
BUT now my issue is, that with the delta-queue I'm getting also data for the SalesOrg I have excluded in the setup-table, as I have no filter for the delta-queue.
My Question: Where/How to filter by the same criteria the entries for the delta-queue?
Thanks for your support,
Peggy
some more details: Application 11; Queue-Name MCEX11; using 2LIS_11_VAHDR, 2LIS_11_VASTH, 2LIS_11_VAITM, 2LIS_11_V_SSL

Dear Arvind,
if there is no way in R/3 the solution must be in BW, but how exactly should that look like in the best/smartest way?
Let us look in detail at an Example:
DSO 0SD_O03 is getting data from 2LIS_11_VAHDR and 2LIS_11_VASTH.
1) For VAHDR I have the chance to delete not needed VKORG already in the InfoPackage, or load first to PSA and than filter in DTP or delete in Startroutine in Transformation.
2) BUT for VASTH, which has no VKORG information at all, I'm only able to delete the Dataset after it's loaded/activated in the DSO, as the rubbish-Dataset won't have any 0SALESORG. How to do that?
Thx,
Peggy

ABR delta extractor and entries written to the delta queue

Hello Everyone,
We have an ABR extractor and it's behaving like this:
For example fields: PM Order Number, Post Goods Issue Date, Start Date, Work Qty, Projected Qty
Create the PM order the entry is written perfect to the delta queue:
10019987, blank, 04/29/2009, 100 PC, 90 PC
Now, if we perform a confirmation on the PM order we see the following:
10019987, 04/29/2009, blank, 0 PC, 90 PC
Now if we change something on the PM order header we see the following:
10019987, blank, blank, 100 PC, 0 PC
When this comes over to BW we don't get good results in our ODS.
Basically we don't get our Post Goods Issue date and Work Qty gets blanked out. Basically, the last change to the order gets written to the ODS and isn't correct.
Shouldn't it do the following:
10019987, blank, 100 PC, 90 PC
10019987, 04/29/2009, 100 PC, 90 PC
10019987, 04/29/2009, 100 PC, 90 PC
10019987, 04/29/2009, 04/29/2009, 100 PC, 90 PC------this gets sent as last record with all fields updated. We choose all these fields in the extract structure.
Thanks

Hello Martin,
Below is a snapshot of the delta queue (you can see the Cancel). Question: How do you control what record is updated and what others are not? We thought the cancel won't update and the others will in order they were updated to the delta queue (and that appears how it's behaving):
Scenerio #1 (sorry, can't remember sequence of steps done in system, but thought I'd mention)
Cancel, Order Number, Release Date, Posting Date, Material, Plan Qty, Confirmed Qty
blank, 10019987, 04/29/2009, blank,       , 4415, 100, 0
blank, 10019987, 04/29/2009, 04/30/2009, 4415, 0,    100
blank, 10019987, 04/29/2009, blank,         4415, 100, 100
X,       10019987, 04/29/2009, blank,         4415, 100, 100
Scenerio #2
cancel, order, release date, posting date, material, plan qty, confirm qty
blank, 100019989, 04/29/2009, blank, 4415, 50, 0
then we perform a confirmation for 50 pieces and this is how the delta queue looks like
cancel, order, release date, posting date, material, plan qty, confirm qty
blank, 100019989, 04/29/2009, blank, 4415, 50, 0
blank, 100019989, 04/29/2009, 04/30/2009, 4415, 0, 50 <----
second line
Notice the second line now has plan qty at 0 and confirm at 50. Plan should always show 50 (or whatever the plan amount is. Something doesn't seem correct here??
Now, if we change something on the order header, we get the correct plan qty of 50 (and confirmed still 50), but then the posting date is blank. So when this comes over to BW we get correct plan and confirmed qty, but posting date is blank. This really makes no sense because if you have confirmed qty populated with a quantity then you have a posting date.
Thanks!

What is differences extraction queue, delta queue and uddate queue ?

hi guru's
What is differences between extraction queue, delta queue and uddate queue ? can u describe briefly?
Thanks & Regards
nandi

Dear Prabha,
Basically when any document is posted in R/3, it is updated to the update table, from there it is taken to our delta queue for send it to BW side.
When extraction starts, data is sent to BW from delta queue. then again this cycle starts.
When you post any document in OLTP system (eg SAP R3),
say create sales order by VA01, then posting is made to application tables (VBAK/VBAP) through V1 and also to sm other tables through V2, Communication structure written to update queue/extraction queue/delta queue(directly) as per the update mode selected. V3 is always followed by V2 and we are supposed to schedule it.
From this delta queue, data is extracted by BW infopackages.
There are various update methods according to which extraction or delta queue are used, so when document posting takes place it also write data into extraction queue (through V1 update) and if we use queued delta method then this data is collected in collection run and written to delta queue and from this delta queue we request for data from BW.
There are lots of posts on SDN for this, please have a look on those.
one for your reference...
https://www.sdn.sap.com/irj/sdn/profile?userid=3507509
Hope it helps...
Message was edited by:
Ashish Tewari

Difference between delta queue and unserialized v3 update - lo cockpit

Hi guys,
What is the difference between delta queue and unserialized v3 update.
How does sm13 come into picture. During system outages, how is setup table affected.
Edited by: zsl05 on Apr 22, 2009 11:29 PM

Hi,
In BW there are basically 3 types of delta queue mechanisms
1) Direct Delta: In this, as soon as the data is posted in the application tables, it is transfered to the RSA7 delta queue.
2) Queued delta: In this, as soon as the data is posted, it is first transferred to the Extractor Queue(LBWQ) and then via V3 Collective job to the delta queue periodically. The transfer sequence is the same as the sequence in which the data was created
3) Unserialized V3 : In this,when data is posted to the application table, it is posted into the Update queue first(SM13). It is then transferred to the Extractor queue (LBWQ) and then via V3 jobs to the Delta queue (RSA7). The difference lies in the fact that the sequence in which data was posted in the application table does not matter.
Hope this helps.
Regards.

What is the Difference between Delta Queue and Extractor Queue?

What is the Difference between Delta Queue and Extractor Queue?

Hi,
please have a look at:
DELTA QUEUE&EXTRACTION QUEUE
Hope this helps.
Regards,
Andrew van Schooneveld
Assigning Points is the way of saying thanks

Wxtract and Delta Queues

Similar Messages

Maybe you are looking for