X 100e ERROR CODE 0000: READ VERIFICATION FALEID

recently bought a notebook X100e nothing appears when I turn, I entered the setup and asked for an analysis on the hard drive and appeared the following: ERROR CODE 0000: READ VERIFICATION FAILED.
I wonder how do I solve this problem.
Solved!
Go to Solution.

Welcome to the forum!
Your hard drive is failing. Contact Lenovo for a replacement, presuming the machine is still under warranty.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Help!!! T61 Blue Screen--unmountable boot volume-- error code 0000: Read verification failed

My computer is T61 (8891CT), but Blue Screen came out and reported--unmountable boot volume. I ran the diagnostic program and got the error code 0000: Read verification failed. I can’t run anything now including the restore and rescue. Has the hard drive died?
If the hard drive has died, I have to change the hard drive, but how to transfer the system (I don’t have any CD) and think vantage software? Thank you very much for you help.

Hi equalefk,
Yes, definitely sounds like it's time to replace the HDD.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

X201 - Error Code 0000: Read Verification Failed

Hi All
for the last 2 weeks i have seen a rise in X201 laptops with "Error Code 0000: Read Verification Failed" we have about 500 of these laptops in the comapany, we started roling them out about a year ago and now we are getting about 10 a week come back with this error message.
is anyone else getting this error? is this a design fault with the hard drive? any info would be good
Thanks
Paul

I have replaced HD's on two of these for clients. On one I was able to run DFT to check it and clone the recovery partition with Acronis. The other one I could do nothing with.
Grand Rapids computer repair and virus removal

Error Code 88709 Reading NI USB-6225 OEM

We have an issue that exists on one of two nearly identical systems that use NI USB-6225 OEM cards. We are reading 75 channels at 1 kHz once per second. On one of two systems the Error Code -88079 occurs intermittantly and when this happens the DAQ measurements stop though the code does not freeze. We do not write to the 6225 card, the only thing we are doing is reading the AI channels.
Our LabVIEW version is 2013 SP1 f2 and NI-DAQmx is version 14.1. NI MAX is v14.0.0f0.
The first system runs on a Windows 7 desktop workstation and has serial mass flow controller software with timers to change flow and concentrations based on a control file as well as a MODBUS TCP NDIR interface. This system is complex but works perfectly.
The second system runs on a Windows 8 laptop. The mass flow software, timers, and NDIR interface were removed from the code of the first system to simplify the software for the second system.
It is only the second system that produces the Error Code -88079. This can happen once a month or several times a day.
I've removed all the 'bloatware' from the Windows 8 laptop and ensured that nothing is set to hybernate or sleep and also turned off the Windows and other automatic updates because these systems must run 24/7 for a year.
So, what is the best resolution for the Error Code -88079 problem with the second system?
The DAQ card was calibrated and tested ISO-17025 through NI by an independant agency so it is not likely to be faulty but we could replace it with another (not ISO-17025) card we have on hand for diagnosis
The USB cable is a possibility. We could obtain a high quality USB cable and make sure the ends fit tightly. Disconnecting the USB cable when the code is running produces Error Code -88079...
Any other suggestions?
Warm Regards,
Lloyd

Hi Saturn233207,
Could you give more detail about the error that you are getting? What are the steps to reproduce the error? Is there any descriptive text at all in the error dialog box - maybe post a screenshot of the error?
Also, as you mentioned I believe it would be a good idea to ensure that you are using a quality USB cable.

HT2674 error code 0000

My machine started freezing and loading very slowly. I replaced the hard drive. Then it started this brief freeze and coding as if rebooting would begin, but then it would freeze. If I turned the laptop off then back on it would reboot and run for about an hour, then repeat the process. Thought the new drive was a dud and replaced it with a different brand. Instantly the process started again (didn't even get Snow Leopard updated enough for Lion this time). Thinking my baby is having a mother board issue instead of hard drive. Is this the correct thought or do I have a simplier, less deadly problem?

gryphon410, welcome to the forum,
what you are experiencing doesn't sound good
Is your hard drive visible in BIOS? Press F1 at start and navigate to Startup > Boot to see if the hard drive is listed. BIOS simulator can be found here.
You should certainly try reseating the drive, it may have vibrated loose during transport, might help. Otherwise putting the drive in an external caddy attached to another system may help you get your files. Depending on the condition of the drive it is sometimes easier to get the files using a Linux cd, (e.g. Knoppix), rather than using windows. Instructions on how to remove / replace your hard drive can be found here.
You may also, after getting your files off, like to try Hitachi Drive Fitness Test to check the integrity of the drive. Even if you don't have an Hitachi drive it will tell youwhether or not it is good or bad.
Hope this helps, and I wish you luck
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Dropped T410 HDD error msg 0000

Hi All.. grrr.. i dropped my beloved T410 (never had any issues with since i bought it) model number 2522w55, while it was turning on. Ran HDD diag. prg n got msg Error code 0000 Read Verification failed. Questions:
1. Does error msg confirm that indeed the hard drive is corrupted or coudl it be something esle? FYI i tried reseating the drive n diag still same error msg.
2. I need the files on hard dirve any easy way to get them back? Idiot that i am, of course, when it rains it pours didnt back up all files.
3. If i need to buy new hard dirve which one does Lenovo ppl recommend? Out of work now so cant buy new lappy gotta slavage what i can.
So distraught...THANKS FOR YOUR HELP PPL

Another thing you might try is booting a live Ubuntu Linux CD or flash drive and see if it can access your files.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Read BootROM Error Codes over JTAG

I am laying out a custom board with the zynq, 7z045ffg900.
I am trying to boot from SD, but this appears to be failing. From reading chapter 6 of ug585, I noticed that there are BootROM Error Codes to help debug. From using an osciliscope the reset signals are being de-asserted at the correct time. For a first go around I am not loading a bitstream.
The JTAG cable does recongnize the 7z045ffg900, and I am able to read the temperature and voltages from the XADC through the Vivado HW Manager. But how do I read the BootROM Error Codes?
Regards,
Chad

I am having the same issue; am unable to boot from SD card; the zynq TRM says:
> JTAG access to error code register read:
° When JTAG is enabled, the DAP controller can be used to read the error code in the
slcr.REBOOT_STATUS [BOOTROM_ERROR_CODE] register field.
how exactly does one read this register? is it through a tcl command in vivado?
can someone post detailed instructions?

My safari won't open error code 1712

When I click on Safari nothing happens. Then I go to the Safari app and try to open it from Finder and I get error code 1712 Safari has timed out. Please help someone!

Have a look here: http://www.techontour.com/os-servers/2008/06/27/mac-os-system-error-code-1712/

Once in a while, I get some errors with every tap on the screen, I've been getting this following error since a few days ago, it says" Your request cannot be processed, Error code 1009" . What is it and what should I do?

What does this error mean?! " your request cannot be processed, error code 1009".

Read through this article for iTunes Store troubleshooting:
http://support.apple.com/kb/TS3297

When I try to finalize my Imovie11 project it just errors out. I have finalized other movies without incident and it will save the trailer. I've emptied trash and run all updates and there isn't a specific error code popping up.

When I try to finalize my Imovie 11 project it errors out. I have made several movies and never had this problem. I have emptied trash, and installed all updates to computer. It will finalize the shorter, trailer but not the project itself. It is not, by far, the largest project I've ever done. I am not getting a specific error code.

When I try to finalize my Imovie 11 project it errors out. I have made several movies and never had this problem. I have emptied trash, and installed all updates to computer. It will finalize the shorter, trailer but not the project itself. It is not, by far, the largest project I've ever done. I am not getting a specific error code.

Why can't I empty the trash (an error code 8003 comes up)

My computer is down to running slow on only 7 gbs. but I can't empty the trash because of error code 8003.

Read
http://www.thexlab.com/faqs/trash.html (try the suggested Terminal command.)
Get Trash it.
http://www.macupdate.com/app/mac/8214/trash-it!

Why do I get a error code 50 when I try to update my existing membership?

What am I missing? I've attempted to update to the new version many times in various ways.

Hi Bill,
Refer the steps given in the following article.
https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
Hope this helps.
Regards,
Sumit Singh
can't download lightroom cc error code 50

Adobe Presenter Error Code

Hello, when trying to launch the application simulation inside Adobe PResenter 8, I get an error code that reads: "Cannot launch Adobe Captivate. Check if Adobe Captivate is configured to be run as administrator. If so, configure Microsoft powerpoint to run as administrator and then retry launching Adobe Captivate. I have Adobe Captivate 7, but I am not trying to use that. I am trying to launch application simulation in Presenter. I am not an administrator and I will never have those privileges on my computer.

The application simulation button calls to Captivate. The capture, and editing of the simulation is done through Captivate, and the published SWF is placed in the Presenter presentation.
You may find the Adobe Presenter Video Creator more inline with what you are expecting to happen. This can be accessed by selecting the Record Video button in the Presenter ribbon. It will record your screen and webcam and you can select to display your screen, webcam or both at any point in the resulting video. And, all without using Captivate.

Error code 22

Hi,
I have tried to delete some backup files from my backup disk (backup from time amchine) and when I tried to empty the tarsh securely a message apperaed that the operation can't be completed with an error code -22 displayed. The tarsh box cannot be cleaned !!! What can I do ???
Eddy Wong from HK.

https://discussions.apple.com/message/22381726#22381726
https://discussions.apple.com/message/23948369#23948369
more
https://www.google.dk/search?q=t-online+smtp&oq=t-online+sm&aqs=chrome.1.69i57j0 l5.6343j0j7&sourceid=chrome&es_sm=93&ie=UTF-8#q=osx+trash+The+operation+can%E2%8 0%99t+be+completed+because+an+unexpected+error+occurred+(error+code+-22).

HT201210 error code "1604" occured while restoring

how should i restore my iphone 3G if there is an error code "1604"

See this support document http://support.apple.com/kb/TS3694 for error codes, however I do not see anything for an error 3. You might try experimenting when things listed near that, such as error code 2.

X 100e ERROR CODE 0000: READ VERIFICATION FALEID

Similar Messages

Maybe you are looking for