X 200 fan noise after upgrading to windows 7 32 bit

last month iv'e upgraded from win vista 32 bit to win 7 32 bit, ever since (that day exactly!) i did that i'm facing a lot more fan noise then before the upgrade, noise that bothers me.
it seems like the fan is starting to work more often then before, and besides that it never goes into idle but continue to work all the, regardless of the load on the computer.
until now iv'e tried to update anything possible (including bios) , i have reinstalled the win 7 with a clean install (the first time i used the update option) and again updated everything possible, that didn't solve the problem.
iv'e also tried to change the power manger options regarding the fan and cooling policy. the only thing that made any change is the "reduce noise dynamically" but that option also changes the overall performence of my system,so that's not a solution for me.
iv'e also read in a couple of places that turning down the wifi or access connection helped someone, but not for...
any ideas what to do next?

i've got the same problem. upgraded from a silent windows xp to windows 7, and there's the noise.
have you found any solution to tune it down?
thanks and best regards,
michael

Similar Messages

T540p-Fan Behavior after upgrading to Windows 8.1 pro

Hi, i recently upgraded my T540p with an samsung evo 500gb ssd and installed windows 8 pro. I then upgraded to Windows 8.1 pro. My system runs smoothly and i am fairly happy with it. The only thing i have notised is that the fan kicks in every now and then. I have observed that the fan kicks in when the temp of the cpu reaches around 50 degrees celcious. This is a new laptop so the air vents are clean, and i am always using it on a desk. The fan produces a quite audible noise level and i guess it is spinning at higher revs when this happens. When the temp drops below 50 degrees i cant hear it at all. Has anyone else observed similar behaviour on their laptops?

Thank you too :-) I think we are not the only people who have this problem. Some other Germans have told about this problem too (http://thinkpad-forum.de/threads/172112-T540P-L%C3%BCfter).
Meanwihle, I have tested for this issue on Windows 7 x64. It’s the same behaviour. Same lower RPM after-sleep-bug (1600 RPM instead of 2000 RPM, Fan does not turn off any more).
I have taken the measurements from TPFanControl (http://www.staff.uni-marburg.de/~schmitzr/donate.html) and my ears ofc. Just used it with BIOS Fan Control (no custom fan control).
Please Lenovo, help!
Edit: Now tested at Ubuntu 14.10 Linux – same issue. Seems to be system independent. Must be a controller issue :-(

Fan noise after upgrade ram and OS

hello there
i have a problem with the fan noise. it's extremely high. i'm running a MacBook Pro 15" and i had OS Tiger. i bought an iphone4S so i upgraded the OS to snow leopard. all running fine!
then two weeks ago i decided to upgrade ram to have a more perfect machine, and i upgraded from 2GB (1+1) to 4 (2+2). the brand is kingston
after that there is a persistent fan noise. it went worse when i went to my windows partition. then it sounded like an helicopter... i updated all software, bootcamp drivers and everything and i don't know what this noise can be... any help?

I did exactly the same as you. The ram I installed is Integral IN2T2GAXNEX2, 2x2 Mbs.
Unlike the original ram which has manufacturer's & serial numbers (as seen in system profiler) this new ram does not.
Manufacturer:          0x0000
Part Number:          0x000000463732353642363145363830304600
Serial Number:          0x00000000
The fans now run at nearly 2000 rpm all the time, from boot, although the temperature is only 19ºc.
Has anyone added actual Apple Ram and found the same problem? (some sites claim this Integral ram to be identical to Apple Ram).
Another site suggested non apple ram may lack a temperature control chip thus inducing the fans to run just in case.

Popping sound after upgrade to Windows 7 64-bit

I recently upgraded my T61 with Windows 7, 64-bit. I added 2 GB of memory to take it to the max limit of 4GB. However, when I log off, I get a popping sound twice, and when I log in, I hear it once.
I was able to generate the same popping sound when I either mute or unmute the sound on my laptop.Also, when I plug in external speakers into the speaker plug, I get the popping sound as well.
Any idea as to why I'm experiencing this issue? Is there a driver issue? It's not affecting the performance of my laptop, but it is very annoying and didn't happen when I had 2 GB and Windows XP Professional (32-bit)
Thanks

Hello,
You mentioned that you upgraded the operating system to the 64-bit edition of Microsoft Windows 7. Did you install over a previous operating system, such as the 64-bit edition of Windows Vista, or perform a clean install of Windows 7?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Portege M700 rotation issues after upgrading to Windows 7 64 bit

I upgraded to windows 7 last night on my portege m700. It is Windows 7 Pro 64 bit. I installed all the drivers under the Windows & 64 bit category on Toshiba's page. Everything works great except the screen will not properly rotate when put into tablet mode. I can push ctrl+alt+ arrow keys to rotate it, and I can also use windows mobility center to rotate 90 degrees at one time. I am wondering what I need to have it rotate once snapped into tablet mode, like it did in Vista. I have the Toshiba rotation utility installed but it doesn't seem to be doing anything. It seems like it is not receiving a signal from the monitor that it has been rotated.
I need this for school, so any help is GREATLY appreciated.

Hi
I think there are not all Win 7 64boit drivers published and released for M700 and you will have to install also some drivers released for Vista 64bit!
For example:
*Tablet PC Extension Package v 1.0.0.1 for Vista 64bit*
This driver package installs a range of important utilities.
_TOSHIBA Rotation Utility:_ Set the default screen orientation you want the system to use when switching from PC to Tablet mode, or vice-versa.
_TOSHIBA Tablet PC Buttons Driver:_ You can dedicate tablet buttons to performing common tasks so that you can easily operate your tablet computer when you're away from your workstation. For example, you can dedicate a button to open a program or to change your screen orientation.
_TOSHIBA Accelerometer Utilities:_ These Utilities are a set of hardware utilities that work with the motion sensors built into you machine. With the Accelerometer, your machine will be able to detect the way you are holding it at any given moment. You can set the machine to perform a specific function when the unit is quickly tilted to the left or right, or to the front or back. You can also take control of the cursor in some applications and make it move by leaning the PC in a certain direction.

Fan noise after upgrading to leopard

Does the machine run slow? It could be a stray process. I had a problem with a printer driver that was using 100% cpu when not in use, but worked perfectly with Tiger (10.4).

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

ICloud Group contacts disappeared after upgraded to Windows 8.1.

After upgrading to Windows 8.1 received message "The set of folders cannot be opened. The information store could not be opened." When opening the iCloud contacts in Outlook 2010. I performed the fix of signing out of the iCloud control panel and back in to resolve the above error message and was able to access my addresses. However, all of the iCloud Group contacts disappeared from Outlook and from iCloud. Is there any way to restore the iCloud contacts back to a point when the Group contacts still existed.

Hi @Tomhum2010 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 14t-1200 CTO Beats Edition Notebook PC and issues after an Windows 8.1 update. I recommend to restore the BIOS defaults.You could restore the BIOS with this document selecting the reloading the BIOS default settings which should resolve the fan issue.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system. If the drivers are not updated this could cause this same issue.
If that does not help at the end of the document it shows you to do a hardware test.
Please note remove any and all USB devices before troubleshooting. Disconnect all non-essential devices
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

After upgrading to windows 8, spectre 14 usb3 slow

are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

Hello rumbacha. I understand you're trying to locate some drivers for your SPECTRE for Windows 8.
There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have. This document can show you where the product number is located.
Once I have this I will attempt to locate the drivers for you.
Have an excellent day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
Although IE11 works, it doesn't work correctly.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

After upgrade to Windows 8.1, ipod nano 7th gen not recognized

/after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen. I have uninstalled and reinstalled ITunes but no luck. I have gone through all steps in troubleshooting, but it still doesn't recognize it. Help!

Hi cindywindy,
If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

X 200 fan noise after upgrading to windows 7 32 bit

Similar Messages

Maybe you are looking for