X 2004 and Windows 7

It keeps telling me I am "out of memory". It worked on my last version of Windows 7, but I replaced my computer and it will not work on this one, what is the difference?

Given so little information, it's hard to say what the difference is. However (I assume you are talking about DW MX2004), trying to run a 6-year old application on W7 is going to be dicey in any event, I would think.

Similar Messages

Dreamweaver MX 2004 and Windows Vista

Does anyone know if Dreamweaver MX 2004 will install and run
on the new Windows Vista?

Looks like the only thing I can't do is establish a
connection to a db. I
get a 405 error with both DWX 2004 and DW8 trial.
If I manually setup the string in code it will work, but then
you can't use
server behaviors.
Just an FYI
"Rob" <[email protected]> wrote in message
news:[email protected]...
> That's strange, windows mail made that turn out wacked.
>
> "Rob" <[email protected]> wrote in message
> news:[email protected]...
>> debushman,
>>
>> I have been running Sudio MX 2004 on Windows Vista
Ultimate with no
>> issues yet.
>> I have used DW more than the others and mainly in
code view, but any day
>> now
>> I do expect DW to crap on me like a new born.
>>
>> Will it work for you? Maybe. Should you do it? Your
call there. Don't
>> expect DW
>> to be fully compatible with Vista until the release
of DW9.
>>
>> If DW is your only tool and MX 2004 is your only
version then wish you
>> luck if
>> you are diving head first into Vista. Hold off
unless you have multiple
>> computers
>> with one as a dedicated dev machine.
>>
>> Rob
>>
>> "Bill00" <[email protected]> wrote in
message
>> news:[email protected]...
>>> If 8 isn't supported, I'd really doubt that MX
is going to run well...
>>>
>>> --
>>> Extending Knowledge, Daily
>>>
http://www.communityMX.com/
>>> CommunityMX - Free Resources:
>>>
http://www.communitymx.com/free.cfm
>>>
>>> No registration req'd for free content
>>> "Murray *ACE*"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Sounds risky to me.
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "debushman"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>> > Does anyone know if Dreamweaver MX 2004
will install and run on the
>>>> > new
>>>> > Windows Vista?
>>>>
>>>>
>>>
>>>
>>
>

Installing and Activating Studio MX 2004 on Windows 8 64-bit - Astonishing Method

Not being a professional, but having been a "hobbyist" webmaster (now retired from that hobby), I have to build a web page for someone, so I installed Studio MX 2004 on Windows 8.
This was an upgrade from Dreamweaver 4. I had the serial numbers for both and I entered them appropriately and got a green checkmark on both. Then it wouldn't activate over the internet since that server, I later learned, has been discontinued. The 800-number on the installation screen was no longer valid, so I came to Adobe.com and finally found a phone number for activation. So I tried activating over the phone, but the were asking for things I didn't see, so I gave them what I saw and that didn't work. So I came to the Adobe website and then I found this page:
http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
And what I saw there was actually quite astonishing. It gave me a different serial number to enter into Dreamweaver, and voila! It was activated and ready to go, and there was no need for the serial number from Dreamweaver 4.
So my first question is: What is going on here? Is my old serial number just no longer any good at all, or are they just giving out free serial numbers for outdated software nobody wants to use anymore, except me?
Message was edited by: Phanes7 (Removed Homesite 5 from the title -- it won't recognize my license number, but I don't really need it anyway.)

Yes, all of what you described was obvious. I was just asking how the software is authenticated as something that's been paid for with what seems to be a "wild card" license number.

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

CHKDSK v6.2.9200.16384 dichotomy between Windows 12 Server x64 Standard Build 9200 and Windows 8.1 Enterprise x64

I seem to have discovered a dichotomy between the ability of CHKDSK v6.2.9200.16384 to detect and repair an external NTFS drive, when executed on Windows 2012 Server Standard Build 9200 x64 and Windows 8.1 Enterprise x64. There should be no difference in executing
the same application between these two systems.
Even though both are 64-bit systems, and both are up to date, and both are running the same version of chkdsk, chkdsk on Windows 12 Server was UNABLE to detect an NTFS filesystem on an external WD 1TB USB drive (detected fs as RAW), while chkdsk on Windows
8.1 Enterprise WAS ABLE to detect the NTFS filesystem on the same external drive, and was able to repair it.
So, what is the difference between these two systems? Why should the same version of
any application yield different results between these systems?
The only result on Windows 2012 Server was:
C:\Windows\system32>chkdsk /x /f M:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
The result on Windows 8.1 Enterprise was:
Log Name:      Application
Source:        Chkdsk
Date:          11/26/2014 8:10:05 AM
Event ID:      26214
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      James-HP
Description:
Chkdsk was executed in read/write mode.
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
    234756 KB in 42 files.
       176 KB in 26 indexes.
    153755 KB in use by the system.
     65536 KB occupied by the log file.
976371120 KB available on disk.
      4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Chkdsk" />
    <EventID Qualifiers="0">26214</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-26T13:10:05.000000000Z" />
    <EventRecordID>11361</EventRecordID>
    <Channel>Application</Channel>
    <Computer>James-HP</Computer>
    <Security />
</System>
<EventData>
    <Data>
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
    234756 KB in 42 files.
       176 KB in 26 indexes.
    153755 KB in use by the system.
     65536 KB occupied by the log file.
976371120 KB available on disk.
      4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
</Data>
    <Binary>7AE2000050000000550000000000000004000000000000000000000000000000</Binary>
</EventData>
</Event>

Hi,
Please check if the Windows Server 2012 is still UNABLE to detect the external NTFS drive after attach the drive from the Windows 8.1 back to the Windows Server 2012.
A RAW filesystem simply means that it is a filesystem that is not recognized by Windows. The most common cause of external hard drives suddenly becoming RAW drives is if they are disconnected from a computer without using the “Safely Remove Hardware” option.
You can use the Dskprobe tool (Dskprobe.exe) to make repairs to check it the issue still exist on the Windows Server 2012.
What is this Raw File System
http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot activate Dreamweaver MX 2004 on Windows 7 64 bit pc?

Hello.
Does anybody in here know how to activate Dreamweaver MX 2004 on a Windows 7 64 bit pc?
I keep getting the message that there is an internet connection problem.
I have deactivated my firewall etc., but it doesn't help me.
Anybody got an idea? Adobe Chat does not have the answer for me!
Regards Anders Fj

Wow! Thank you. It Works! Clever!
This is really helpful for those
of us who are nore professionals. I only use Dreamweaver MX 2004 to
maintain and repair my own small homepage with photos. And I know how to
use Dreamweaver MX 2004 and I am not interested in learning new tools -
not now
ONE MORE QUESTION THOUGH: Where and how do I update my
Dreamweaver MX 2004 now that I have installed Dreamweaver MX 2004 on my
new Win 7 64 bit pc?
Regards
Anders Fjeldberg, Denmark
Ken Binney
skrev den 2014-05-04 00:01:
CANNOT ACTIVATE DREAMWEAVER MX 2004 ON
WINDOWS 7 64 BIT PC?
created by Ken Binney in _Dreamweaver
support forum_ - View the full discussion
>

In dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

in dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

Open the Preferences panel (Edit menu on Windows, Dreamweaver menu on a Mac), and select the Site category. There are two checkboxes there for dependent files. Make sure both are selected. The Dreamweaver default is NOT to upload/download dependent files. You need to click Yes, if you want the dependent files to be included.

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word

I purchased microsoft office mac in 2004 and suddenly I get an error message. It won't launch. I click reopen and it does the same thing. I get a long message in the panel. It tells me it will send a report. I still can't access any microsoft item - word, excel, nothing works.
I have a mac book pro 10.6.8
Thanks

cassidy3 wrote:
Good news is that I can access all my documents. Bad news is I had to pay $150 for it.
I spent a lot of time trying to find a solution before buying. I did not try the launch terminal solution....
I will check back so I can find out what to do should this happen again.
More possible bad news. If you had followed what fane_j had asked you to do you might have found out it wasn't microsoft's fault for your problem and wouldn't have had to spend $150. Because while you may have an Office that works, fane_j was not suggesting a solution but probing for a trojan (google "flashback trojan") that has been crashing powerpc code which is what Office 2004 is.
So if you do have the trojan, while you can run a version of Office, the trojan may still be in your system since installing a version of Office isn't going to remove it. So I'll make another request. Launch Terminal (in your Utilities folder) and copy/paste the following line into the terminal window and hit return:
defaults read ~/.MacOSX/environment
If you see anything other than a "does not exist" error message you almost certainly do have the trojan and post the results in this thread.
The choice is yours. You can ignore this and take the risk. Or do what has been requested.

Um is there a old version of adobe dreamweaver mx 2004 for windows xp professional? can i get a free

um is there a old version of adoobe dreamweaver mx 2004 for windows xp professional? i have an old version of adobe photoshop(which is adobe photoshop cs(8.0) and adobe image ready which was activated by my father, which i dont know the activation code for it but any way is there a way to get a serial code for it?(dreamweaver mx 2004)
Message was edited by: japal3

Yes. The Activation codes can be found in a table near the bottom of this link:
http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
Nancy O.

AddOnRegDataGen.exe of version 2004 and 2005

Dear Experts/Gurus,
Are there any differences between AddOnRegDataGen.exe of version 2004 and 2005 especially for add-on developed
by partner or customer ? if yes, what should I do to my add-on ? I just did the following steps:
1. Recompile the add-on after put identifier string generated using add-on identifier generator in SBO 2005A
2. Creating registration file using AddOnRegDataGen.exe of version 2005 after created installer
3. Regiter the add-on using add-on administration
Did I miss something beside the above steps ? because the add-on can not run in the SBO 2005. The add-on is developed using SDK SBO 2004A. I appreciate your answers. TIA
Rgds,

Hi Steve,
Some new fields were added between versions 2004 and 2005. But if you open the AddOnRegDataGen.exe window you will be able to see if something is not filled in your addon.
Where are you having problems? While installing or when trying to run your addon? What is the error message?
The steps you did are right:
1. Recompile addon with 2005 references
2. Create installer.exe
3. Create .ard
4. Register addon in B1
AddOnInstallAPI.dll has also changed between 2004 and 2005 versions. It should work without any changes but you better change your installer to avoid problems in following versions.
Are you using B1DE to generate your installer? You can download B1DE tools from B1 main page, SDK tools page.
Hope it helps
Trinidad.

Font differs from Linux and Windows ?

Hi, i just want to ask, are fonts different from windows and linux in applet. I use a standard courier font.
For example, if i make an applet with courier font texts in linux, and make the texts wrap themselves, they will run ok in linux. But if i run the compiled applet in windows, the wrapped text somewhow got truncated.
But if i compile the applet in windows, it will look ok in linux and windows.
I've tried replacing my courier fonts in my /usr/java/jdk/jre/lib/fonts/cour*.ttf with the cour*.ttf from c:\windows\fonts with no effects .. Applets compiled and run ok in linux doesnt work in windows. They must be compiled in windows to run ok in both.
Why is that ?
Does the compilation use the fonts in the jdk lib or the system fonts ?
I'm so confused T_T
Please Help

How do I get Mac OS 10.4.4 and Word X for Mac to see
all the characters in the Word for PC document
formatted in Times New Roman?
There's no way with Office X, which can't do Unicode Greek. You need to upgrade to Office 2004 which is Unicode-savvy and installs in your Mac the same Times New Roman with Greek, Cyrillic, Hebrew, and Arabic which is used by WinXP. An alternative might be AbiWord or NeoOffice/J.

CD different for Linux and Windows

I have in hand a very strange CD. This is an (old) CD with drivers for a Samsung printer. The CD has drivers for Linux and Windows. But if I mount the CD in Linux, I see only the Linux driver and if I access the CD from Windows, only the Windows drivers are seen. How they can do that ? How can I mount in Linux the CD in order to see the content seen from Windows ?

In Windows ( DIR D: )
Le volume dans le lecteur D s'appelle SAMSUNG_LBP
Le numéro de série du volume est C432-A954
Répertoire de D:\
28/02/2005 00:53 <REP> ACROBAT_READER
26/10/2004 06:11 740 AUTORUN.INF
28/02/2005 00:53 <REP> DATA
28/02/2005 00:53 <REP> ML-1610
28/02/2005 00:53 <REP> Manual
09/12/2004 03:55 11 219 SETUP.DAT
20/09/2004 07:29 270 336 SSAuto.Dll
17/09/2004 08:03 253 952 SSEtc.dll
22/09/2004 11:09 225 280 SSFcs.dll
12/03/2004 05:59 1 622 016 SSRes.dll
17/09/2004 08:04 155 648 SSTtp.dll
26/10/2004 05:42 307 200 Setup.exe
28/02/2005 00:54 <REP> USB
8 fichier(s) 2 846 391 octets
5 Rép(s) 0 octets libres
In linux (ls -l -F /mnt/cdrom)
total 44
dr-xr-xr-x 22 root root 4096 Feb 28 2005 Manual/
-r--r--r-- 1 root root 2555 Feb 28 2005 README.txt
-r-xr-xr-x 1 root root 51 Feb 28 2005 autorun*
dr-xr-xr-x 3 root root 2048 Feb 28 2005 bin/
dr-xr-xr-x 8 root root 2048 Feb 28 2005 cups/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 data/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 help/
-r--r--r-- 1 root root 8517 Feb 28 2005 icon.xpm
dr-xr-xr-x 9 root root 2048 Feb 28 2005 locale/
dr-xr-xr-x 2 root root 6144 Feb 28 2005 misc/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 ppd/
dr-xr-xr-x 2 root root 2048 Feb 28 2005 scripts/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 setup.data/
-r-xr-xr-x 1 root root 6603 Feb 28 2005 setup.sh*
ouput of isoinfo -d dev=dev/sr0 (in linux)
CD-ROM is in ISO 9660 format
System id: LINUX
Volume id: SAMSUNG_LBP
Volume set id:
Publisher id:
Data preparer id:
Application id: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
Copyright File id:
Abstract File id:
Bibliographic File id:
Volume set size is: 1
Volume set sequence number is: 1
Logical block size is: 2048
Volume size is: 239152
Joliet with UCS level 3 found.
SUSP signatures version 1 found
Rock Ridge signatures version 1 found
Rock Ridge id 'RRIP_1991A'
If I use on Windows the Windows port of cdrtools; then these tools behave as in Linux, showing me the Linux contents. In Linux I can also mount -t udf and then I see:
total 32
-rw-r--r-- 1 root root 32768 Feb 28 2005 Desktop DB
-rw-r--r-- 1 root root 0 Feb 28 2005 Desktop DF
drwxr-xr-x 1 root root 22 Feb 28 2005 Manual/
This was for a Samsung ML-1610 B/W laser printer. This is crazy.
@lolilolicon That explain the result when I mount -t hfs. But the difference in Linux and Windows remain mysterious. How Windows "mount" the CD? I believed it was the equivalent of mount -t iso9660 in Linux but apparently, it is not.
Last edited by olive (2011-09-08 12:12:16)

Problem with Sessions and window.open

Hi,
Hi everyone,
Help Please!!!
I am working with Sevlet session objects and HTML forms and windows. I have an HTML form for the user to supply a username and password. Once the user clicks submit I need to open another browser window that has no toolbar, no location, no status bar, etc. The user should also be able to go back to that login screen and login again and open a 2nd, 3rd, etc. instance of the application. My problem is that each application is being asigned the same sessionId. I believe it is being asigned to the main login window and thus to the other child windows it opens. Is there a way to work around this? Do I need to make the user open another browser window to login? I need to be able to let the user open multiple instances of the application with unique session ids for each.
Any insight is GREATLY appreciated on this topic. Anything you can tell me about sessions (Java), IE, window.open would help greatly!
THANK YOU IN ADVANCE!!!
MA

To achieve this, you must introduce another level of
abstraction to the Servlet specifications. When you
work with JSP/Servlets you use mostly the HttpSession
to handle user related tasks, and the aplication
context, for things that are common to all users. But
inside the HttpSession scope, you want to create
containers that have 'smaller' scope and are uniquely
identified.
A ipothetical scenario :Let's say that you must have
multiple connections to several databases, on each
database user rights beeing diferrent, and you must be
able to track user actions globaly, and eventualy
capture a 'Close Application event' and close all db.
connections.
1. when the user first accesses the login frame create
the HttpSession. In the HttpSession object, store a
Hastable (let's call it 'ConnectionTable'). Each
object in the Hashtable must identify uniqely a
database connection. Now, to create unique identifiers
ids, make the keys in the hashtable java.lang.Long
objects, created using System.getCurrentTimeMillis().
This guaranties there will be no possible confusion.
From each new open window, on each request to the
server, along with the usefull parameters, send the
connection identifier. When proccessing the request,
select the object from the Hastable wich corresponds
to the ID.
2. Now, the values in the ConnectionTable, must act as
the containers that I mentioned in the first
paragraph. The simplest way to do this is to have
again a Hashtable derived class to do the job, wich
exploses methods similar to HttpSession: setAttibute (
Object key, Object value) and getAttibute ( Object
key, Object value). This container may use internally
a Hashtable to store object, and explose only the
getAttribute and setAttribute methods for clarity. Any
way, this is a problem of implementation. Let's call
this class CustomSession.
Now, a textual activity diagram:
1 user accesses the main page, you start a new
HttpSession; In the HttpSession object, store the
ConnectionTable object.
2. the user enters the userID and pwd and adatabase
name, and a new window is opened. Let's supose the
data entered is valid.
3. when you process the login data, you create a new
CustomSession object. you put in it whatever you would
put in your HttpSession. You generate a unique
identifier using System.CurrentTimeMillis(). Put the
CustomSession object in the ConnectionTable, using the
generated id as key. Send the response.
..... later on .....
100. the user asks for a particular action to be
performed - e.g. a row deletion. The page contains a
form with text field where the user introduces the
row number, a submit button and a hidden input with
the ID.
101. you process the data. Get the ID from the request
object, get the ConnectionTable from the session, get
the CustomSession using the ID as key, do whatever
your logic was doing, but obtaining the objects from
the CustomSession instead of HttpSession
NicNic,
Very slick idea. I think that it could work and it seems that there would be not security issues because the id that you would store on the client side is the Unique Identifier and not the actual Session Id. Do you forsee any security issues for this implementation?

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

X 2004 and Windows 7

Similar Messages

Maybe you are looking for