X-6-00 is not recognized after OVI software update...

Hello,
some days before, everything was so fine until ove player decided to update itself on my pc. and on its way, it updated the cable driver, and since then my X6 device is unable to connect via cable !
that is so frustrating really
please help
i am using windows vista
this is the error i am getting:
- Make sure that the USB data cable is compatible with your Nokia device. For more information, refer to your device manual or to the Nokia Ovi Suite web page.
- Make sure that you have selected to use the PC Suite mode or default connection mode on your Nokia device. To change the mode, disconnect your device and reconnect it to your PC. For more information, refer to your device manual.
- Make sure that the connectivity cable and the cable drivers are properly installed. If the installation of drivers has failed, they must be reinstalled. For more information, consult the Quick Guide for Installing Nokia Connectivity Cable Drivers.
- Try connecting the cable to another USB port. Avoid using a USB hub unless it has an external adapter to supply enough power for connected devices.
- Restart both PC and the Nokia device and try to create the connection again.
- If the connection still cannot be established, consult the Nokia Ovi Suite FAQ Search on the Nokia web site.

it is solved, i uninstalled the cable driver from the control panel, and then installed the driver directly from the CD

Similar Messages

IPhone not recognized after Mac security update

I have a Mac iBook G4 running OSX 10.4.11, and an iPhone 3G running OS 3.0. Up to now they have worked fine together. The phone was charged on the iBook this morning. This afternoon I ran software update on the Mac which installed the latest security update (2009-05, I think). After that, the phone is not recognized when plugged in the USB port. It no longer charges, nor is it recognized by iTunes.
I have checked the following to be sure that the security update is the culprit:
The iPhone with the same cable works fine on another Mac (running 10.5).
Other devices (thumb drive, printer) work fine in the same USB ports.
Finally, I restarted the iBook from the original installation CD for OSX 10.4. When running with the original version, the iPhone is recognized correctly.
So, I am reporting a problem with the security update, and I need to know how to back it off, or how to get it fixed.
Thanks for any help.
NOTE: Software update also installed iTunes 9.0.1 along with updates to Quicktime and Safari. However, none of these apps even have to be running to show that the phone will not charge.

The problem was solved by resetting the System Management Unit, thanks to a helpful phone call with an Apple Expert. On the iBook this required unplugging, removing the battery, and holding the power button in for 15 seconds.
Earlier I tried zapping the PRAM, as someone suggested, but the phone was not recognized. But it turns out it did show up in the System Profiler.
I have no idea why this happened in the first place, right after the software update.

My MacBook pro did not restart after the software update

My MacBook pro did not restart after the software update

Kappy wrote:
Now, were I a mindreader this wouldn't be an issue, but unfortunately, I'm not.
WHAT??? Now that's a disappointment! I was sure the all-seeing, all-knowing Prof. Kappy would instantly discover the problem thru time and space....
Ok, back to the issue at hand, the Prof. is right. In none of the OP's participation, nor in any of his choir of followers save mommy power is there the least hint of what Apple product is failing. While y'all get a move on and disgorge the details, may want to try a Safe Boot. Hold down the Shift key prior to the startup chime and wait awhile. IF it starts, then it means you have some third-party software that's causing the problem. Else there's a strong probability a complete reinstall will occur in your near future.
In the future and in spite of what some purists may say, be sure to service the system disk BEFORE patching. By "service" I mean booting up the Mac using your Install DVD (Snow Leopard or priors) or booting in Recovery Mode (Command R, in the Lions and successors), running the Disk Utility found in that mode and doing a Repair Disk and Repair Disk Permissions. Until NO errors show up. Cause patching up an already damaged system will only make things worse.

Sd card not formatted after ovi maps update

Hi.
I have a problem with my N82 Series Nokia.
I wanted to update my maps via Ovi Software. I do this and it worked fine.
Afterwards I tried to check the new maps but only a green area appeared. I accessed the sd card in the phone and only get the message "card full" (or something).
Now I turned off the cellphone and put the sd card into my pc. But Windows just ask to format the card because it is not formatted.
This is really very "unfunny" ... all data on the card are lost? I just wanted to update the maps. On a other thread I read that only a few maps (maybe not whole europe) can stored on the cards. That ok, but the Ovi software has to take care about this not the user. The sw has to check the free space and what you want to download.
If windows says, that I have to format the card than I have a other chance or is there no chance to get the card with the stored data working?

Hej again.
I tried now Recuva. Thanks for this tipp. It´s an excellent program!
But this does not help!
Recuva restores 5 files (only mp3 / wav files).
They are all for the navigation with the maps.
My interpretation:
The Ovi software downloaded the maps and just store all on the sd card and store and store and does not proof if the disc is full or not?
And so it copied all on the card until it was "overfull".
I am a computer scientist and I can´t realize why this will appear in a "crash" of the sd card (maybe the partitioning and index is corrupted) but why?
Maybe the ovi software has a failure and just copied all to the card anyway if there are other files or enough space or not ...
Another problem (maybe) is, that I download it via Bluetooth. I don´t realize in the bginning that the cards are so big and the SW said don´t break the connection while downloading. So it takes a few hours.
I think your development team for the Ovi-Software have to check this case and here are my information to reproduce the problem:
Nokia N82 cellphone
Data from: *#0000#: V 20.0.062 28-02.08 Nokia N82 (96.01)
Computer:
Windows XP Media Center Edition SP 3 (on Dell Notebook)
Connection via Bluetooth
Updating on Ovi Software
What is the next step now?
It is ok when I just format the sd card and put it back in the phone? Create the phone on it´s own a directory-structure (maybe for images from the cam and so on ...)?
When I have to format it ... in which format? I saw in Recuva that it is/was FAT16 formatted, is that right?

Blank discs not recognized after installing security update

Just installed the latest security update and now the computer will not recognize either blank CDs or DVDs. The first time I popped one into my external burner, I got the notice that I'd inserted a blank DVD and was asked if I'd like to open it in the finder (even though I had already set this as the default option). Then when I said yes, I got an error message that the disk could not be read. Ever since, I no longer get the notice, just the error message. Moreover, "drutil eject tray" will not eject the disk.
Same thing happens with the internal drive. Again, drutil did not work and I had to restart to eject the disk.
Disk Utility shows the disk but will not allow me to format it.
These disks were working fine until I installed the security update.
Anybody have any ideas?
Thanks.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions afterwards, reboot.

Flash player not working after recent software update

I have a MAC OSX 10.5.8, after the recent software update my flash player no longer works.
I have read that there is a problem with security for the version of flash that I was using and this is the reason it was disabled. However, I have tried to download the most recent version from the Adobe website, but nothing happens and a message says I already have flash installed on my computer.
I have a version of flash in my HD>>Library>>Internet plug-ins, and there is also one in HD>>Library>>Internet plug-ins (Disabled) which I have tried to move but it only lets you copy it and it seems unable to be moved back to HD>>Library>>Plug-ins
I have also tried to download the "No Script" addon for Firefox so that I can at least have flash working in Firefox, but that doesn't seem to be downloading either.
Please could somebody help me. I cannot now watch videos, listen to my favourite radio stations or even upload pics to ebay to create ebay listings. This problem ruining my internet enjoyment and I just hope that it can be fixed again. How dare Apple just do this without any warning or giving any info on how to easily fix this problem once flash has been disabled.
I am not a techie so maybe there is an easy fix, but I have spent hours trying a lot of different things but nothing seems to be working.

Please, nobody waste any time replying to this issue as the problem appears to be fixed now. I rarely restart my laptop as I usually just put it to sleep, however, I restarted it and the problem looks to have gone away. I may have fixed it with some of the things I tried, but the laptop may just have needed restarting - I'm not sure.
But as long as the problem is resolved, I'm happy. :-)))
Thanks anyway!

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

Time Capsule not working after last software update

I bought my time capsule 3 weeks ago. Set up and worked like a charm (I use airport express for my wireless network). After I downloaded the latest software updates a week or so ago, I got a message that my computer could no longer recognize my time capsule. Since then the time capsule light only flashes amber and wont appear in airport utility.
Any ideas?
Thanks

I was having problems with the 7.3.1 firmware as well. For me, in manifest as though the internal disk had went bad--a blinky amber light and a "Disk needs repair" error. Rolling back the firmware solved it for me.
To do this:
--Open AirPort Utility.
--Click on your TC.
--Click on the "Manual Setup" button.
--When the configuration summary pops up, click on the word "Version".
--From the "Upload" drop-down list that is on the new pane that pops up, select "7.3", and click "Ok".
--Once it reboots, it'll be at 7.3.
Hope this helps. I'll be waiting a few weeks after 7.3.2 comes out to upgrade. I'm not real impressed with 7.3.1. As far as I can tell, it broke more than it fixed.

Brand New 27" iMac i5 will not boot after installing software updates

I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
Any suggestions? A little frustrated here....

If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
Does this help you at all?

Quick Camera not working after 4S software update...

After installing newest iphone 4S software update the quick camera function no longer works. Is there a solution to this problem?

Thanks, did not realize you had to slide the camera button up! Before you just had to tap it.
So, do you also know why the "Play, forward, and reverse" buttons" along with the slide bar "volume", show up on the same screen? (i.e. when I double click to get the quick camera button, these show up at the top of my screen directly under the Time. But I can't get them to do anything when I tap em.) Brian

My iPhone will not start after new software update. Freeze on apple screen

I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
wish I had waited.

Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

IBook G4 will not restart after system software update

After updating the system software, via software update, the system will not get past the initial gray screen with the spinning dial.
This is my daugthers computer and she is out of town working and does not have any of the system disks with her.
Any suggestions are much appreciated.
Thank you!
iBook G4 Mac OS X (10.4.7)
Yikes! Mac OS X (10.4.3)

George
Boot your computer from the install DVD, insert the DVD and shutdown the computer. Boot up while holding down the C key. Just before the install sequence you will see options in the menubar, select utilites, go to disk utility, select your target disk, verify and repair disk. You might want to verify and repair disk permissions as well. To answer your question it's not a virus as there are no viruses for MacOSX. It could be the updates did not install properly. Try that and follow with a post to let us know if that worked for you. What software update were you running when this happened?
Joseph

Computer does not startup after canceled software update

I was installing the newest version of leopard. It seems as though leopard installs the update while the computer is starting up (?), as opposed to tiger, which downloaded the update while the computer was still on.
anyway, i was feeling impatient and decided that the update was taking to slowly and that i should just cancel it and update it later.
however i made the stupid decision of forcing my computer to turn off (by holding down the power button)
now whenever i try to turn on the computer, it will get to the screen with the apple and the rotating circle-thing below it
however, it won't get past that part, i left the computer for an hour and when i got back, it was on the same startup screen
i'd appreciate any help anyone can give me

You damaged your OS when you did a force-quit.
Restart your machine with your original Leopard disk in the drive while holding down the "C" key until you see the Apple.
Then you can re-install your OS. You should back up your data to an external hard drive by doing an "archive and install" which is one of the options you will have when you begin.
If you don't have a hard drive, you can just re-install the OS and then update again.
Installing with first backing up is not recommended since there is always the possibility of some problem installing new software that could result in data loss.
If you are going from Leopard 10.5 up to 10.5.2, use Apple's combo updater which should appear in Software Update.

Tiger does not start after failed software update

Hi,
I ran software update, to install updates for Tiger, 10.4.6. I got a prompt to shut the laptop down, and follow the instructions on startup of the laptop. I pressed the shut down button, I was then told by the instructions to hold down the power button until the white sleep indicator flashes, and the bar travels across the screen. I accidentally let go of the power button and it shut down halfway through the update (I cannot remember what the update was).
Now, when I press the power button, the screen stays blank (no flash or anything), no sounds are produced, but the sleep indicator stays at half brightness, until I force shut down the laptop again (holding down the power button).
How can I get this laptop to start up again normally?
Thanks,
George.

Hi George,
This sounds like a firmware update. Apple has a firmware restoration CD that you can make. What you do is download a disc image of the CD, burn it in another Mac, and then run it on your computer that's not working. The directions are kind of involved, so you might need to print them.
Also, pay special attention on the firmware download page to the section where it tells you which computers it's good for. I've linked to version 1.7, but there are other versions available, too, depending on which computer you have.
charlie

2nd gen apple tv not streaming after last software update

I have 2 2nd gen apple tvs. I updated the software to 5.0 on one but not the other. The updated apple tv is having streaming issues with my purchased content. Netflix will stream but not my purchased tv shows or movies. Anyone else having this issue? I tried a reset but that didn't work. And my other apple tv which i didnt update is working fine. Any advice would be appreciated. Thanks!

Damian,
Thank you for taking the time to respond and no chance I thought that was rude. Unfortunately I had already reset and rebooted prior to posting. Also I have another 2nd gen apple tv and I stream netflix all the time as well as amazon prime and am not having issues so it's not my connection. The only difference between my two apple tvs is that I upgraded the software on one (which now isn't working right) and not the other which is still functioning well! So I am curious if anyone else has experienced this and has a solution.
Thanks again for your ideas and if anything else occurs to you, ping me!

X-6-00 is not recognized after OVI software update...

Similar Messages

Maybe you are looking for