X appears in Report Painter Total

Hello,
We have a report designed using GRR1 - Report Painter. The table used in the Library is GLPCT.
There is a line to display the total of all the values for a particular Profit Center Group where the postings have gone to Dummy P.
In the selection criteria we mention the Company code, Fiscal Year, Controlling area & Period.
In further selection we mention the Profit Center Group.
However when we execute the rpeort in the Profit center total line displays a small X in the right side. It does not display zero.
However when we double click on that line automatically the report KE5Z is launched. Here we can see that there is value for the line which is not reflected on the main report.
Please let me know what is the error.
Thanks & Regards
Shreenath

HI,
when a total line contains a "X" it can mean that the values can not be summarized.
The most common case it that line items should be summarized which have diffenert units of measurement (eg summarizing EUR / USD values makes no sense, but also "hours" and "minutes" can not be summarized although they can be converted into each other).
So one approach should be to check the line items base units if they cause the summarizing problem.
An other thing is the column width in report painter. If it is (for example) 6 digits, but your total is more than 6 digits long, the total is displayed as "xxxxxx". Take into consideration that also a decimal place is a digit, a "minus" before a total is a digit,...
Check this also and if thats the case, set the columnwidth to a feasable number of digits.
Best regards, Christian

Similar Messages

  • Plan next yrs values not appearing in Report Painter

    Hi,
    In our one of Z report (developed thrugh SAP std Report Painter functionality), Plan next yrs column does not shows any value in output of report.
    Basically this column should show next years plan values for WBS Element cost elementwise.
    When I double click on any of the cell of this column, I am getting output with 0 records but selection criteria is appearing as Period 7 and Fiscal year as 2999 on output screen on the top. So I am thinking that output is not appearing because of wrong selection criteria field values/characteristics values.
    Just wanted to know from you all guys, what things should I check in Report Painter to resolve this issue? Also what are the causes of this issue?
    Could you please tell me the remedial procedure and transaction code to resolve this kind of issue?
    Edited by: SWAPNIL PRAMOD KHARUL on Jan 30, 2011 12:17 PM
    Edited by: SWAPNIL PRAMOD KHARUL on Jan 31, 2011 9:29 AM

    Hi,
    Thanks for reply.
    Characteristics are:
    Value Type: ZCJUL01
    Value Type:10
    Version:6-VERP
    Period:  7
    Valuation:0
    Object ind.:1  to 5
    Object ind.:P
    Fiscal Year: Z-GJHNJ Next Year  to 2999
    I think it looks like wrong Period selection characteristics value.
    Please suggest/guide what has to be done?
    Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:19 AM
    Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:21 AM

  • GL & PC description not appear in report painter (ECC6)

    Dear Expert,
    kindly help me on this issue. GL description and Profit Center description not appear in report using OFL Table.

    Hello sayujya Patil,
    Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
    Please reply...
    Thank You.

  • Report Painter - Totals are different on face of report & line item details

    Hello,
    We have a report designed in report painter. Thye lIbrary table is GLPCT.
    When we run the report system gives e.g. 100 $ on face of report. However when we double click on that line to get a line item details reoprt the value is different. It is either less or more than the amount diaplayed on initial report.
    Please can you suggest what coule be the probable reason for this anamoly.
    Thaks & Regards
    Shreenath

    Hi Sreenath,
    when you double-click on a line you are jumping to another report.
    The report you are jumping to has either been defined as a linked report by you, or it has been copied from an original SAP-report if you started the creation of your report by copying a standard SAP report.
    The sending report tries to pass on all the selections for the cell you double-click to the line-item report. For standard SAP reports it is guaranteed that this should work and the line item report gives the sames results as the report you are calling it from.
    For self-defined reports, this may not always work. I have had problems especially when calling line-item reports from sum-lines of my self-defined report. The reason was that the selections could not be passed on properly.
    Example:
    line 1: selection on account X and profit center A
    line 2: selection on account Y and profit center B
    line 3: sum of line 1 and line 2
    Now, when I double-click on a cell of line 3 and jump to line items, it passes on the selection idependently, i.e.
    accounts: X, Y
    profit center: A, B
    the line item report now gives me all values for all combinations of accounts X and Y and profit centers A and B.
    It does not take into account the combined selections in my original report.

  • Report Painter vs FM Drilldown Reports

    Hello Experts:
    We are upgrading from Former Budgeting to BCS and are attempting to use the report painter tool for our reports.  I have not used the report painter tool much although it is similar to the FM Drilldown Reporting functionality.  My question is:
    With FM Drilldown Reporting, characteristic FM acct asst was available as a row choice and included fund, funds center, and commitment item.  It appears with report painter that each of these is a separate characteristic which creates three lines on the report instead of one.
    Example:
    FM Drilldown Reports
    Fund/Funds Center/Comm Item    $$$
    Report Painter
    Commitment Item  $$$
    Funds Center       $$$$
    Fund                     $$$$$
    I know that we could use Fund and/or Funds Center as variations but we want them to appear on a line in the report so that when the report is downloaded, the information appears as in my Drilldown report example.   Is there a way to create a characteristic that includes all three FM assignments?  Or some other method to accomplish this?

    Hi Everyone:
    I am still fighting with Report Painter.  I am now trying to figure out how to pull Period in as a column characteristic even though I have it as a characteristic in the General Data Selection.  I'm using Library 4FM for budget reporting.  My end users want to be able to execute the report by period but for certain columns of the report be able to see all periods displayed.  Example:
    Adjusted Budget - All Periods
    Commitments - Period from selection screen
    Expenses - Period from selection screen
    I do not understand the use of the GRCT transaction.  Are there any links that might provide detailed instructions for it's use?
    I would appreciate any assistance/guidance you can provide.

  • Need help for total of Dr and Cr. in report painter

    Hello friends,
        I have created the trail balance in report painter. In table faglflext table. I created the common column of debit and credit cumulative balance and then separated the problem is I am not getting the
    total of all the debit and credit amount.
    Please help....

    solved

  • Report Painter not showing totals for some cells

    Hi,
    We're developing a report painter that will give us a total of all the columns. This total uses a set of variables and a set which essentially is a grouping of the profit centers. The problem is it is not showing any value on the cell. Despite the individual accounts having some values.
    Any ideas where could this gone wrong ? the set exist with the correct accounts.
    I.e.
                                    A1            A2           TOTAL (A1 + A2 - defined in set)
    Depreciation            100          100          200 [ but this shows blank]

    how did you solve this problem,my financial statement is not reflecting total posted depreciation even though it is reflecting the depreciation in the indididual G/L accounts.

  • EXTREMELY URGENT: % Cost (out of Total Costs) Column in Report Painter

    Hi Gurus,
    I'm not new to Report Painter, but, am stuck at one thing.
    In report, Col 1 shows Costs by Administration (row 1), Labor (row 2), Others (row 3) and total (row 4 being formula as total of row 1, 2 & 3).
    Client wants col 2 to show % Cost of each row out of total Expenses (so totals row in this col. will have 100%)
    How to do it technically.
    Please help. It's EXTREMELY URGENT.
    I'll award points ASAP
    Regards,
    SB

    Its abit difficult to illustrate without having a screen dump, what you can do is make use of something called special cell definition. Now if you double click on the cell for column 1 of row 4 for total costs then the system identifies it as a cell Z001 which in fact will recognise a constant value of total costs , thereby you can define in Column 2 as a formula element with (X001/Z001)*100 thereby giving a value in %. Try it and see if it helps

  • Doubt about sub totaling in Report Painter

    Hi,
    I am new to the report painter and i want to know that is there a possibility of performing the sub total in the output.
    Suppose,i had defined a row and column and in the row i had given the range of the Account Numbers and in the column i had defined the local currency. As there are a lot of GL Account Numbers i.e. 1000,2000,40000 and so on....
    Is it possible to display the out put on the basis of sub total ? I had seen a sub total button during the creation of report in report painter format and i had defined Account Number to be explode .
    When i execute the report it displays the grand total of the whole accounts.. I want to show sub total also.
    Please provide me guidelines to solve this problem.

    >
    Vijay Babu Dudla wrote:
    > >So better don't give him a chance to create one more thread, please...
    >
    > But he will create one more Account , it is easy for him to post a new Thread with another name.
    Dont worry. Its pretty easy to catch his clone. All his questions follow a pattern. Plus he asks a hundred question on the same issue. Also, he's probably the only ABAPer who extensively works on Report Writers.
    pk

  • Report Painter - Adding Total lines on Report

    Hello -
    My client wants to add a single line above all of his sub-totals and a double-line above his grand total.
    I can't find where to do that.
    I think if I were to use report writer and row blocks, I could do it, but not sure about report painter.
    Any help would be appreciated.
    Regards,
    Natalie

    Hello - I don't see Insert Diving Line after I click Insert Blank Line.
    Where is that?
    If I insert a blank line and then double click on the blank line to add a line like the following:  "__________" for sub totals, etc, I can't.  I can only add another characteristic or formula in the blank line.
    Please help and thanks for your help!

  • Sub Total Button in Report Painter Output

    Hi,
    I am working on the Balance Sheet Report in the Report Painter and i am trying to display the sub totaling display in the output.
    In this i had defined the row which is based on the range of Account Number and it has the series i.e. 100000,30000,200000 etc..
    Is it possible to display the output sub total on the basis of the Account Number Series which is mentioned above. As in a ALV Report we have the sub total button  in report output.
    If it is,then please provide me guidelines for it ......
    Edited by: ricx .s on Jul 29, 2009 6:47 AM

    Hi,
    Try this code,
    it working,
    Data :  X_SORT      TYPE SLIS_SORTINFO_ALV,
    IT_SORT     TYPE SLIS_T_SORTINFO_ALV,
    X_SORT-SPOS = 1.                                " Field number of ALV on which u want to sort
      X_SORT-FIELDNAME = 'SEGMENT' .     " field name
      X_SORT-TABNAME = 'IT_ALV1'(001).  "table name same as ur alv table name
      X_SORT-UP = 'X'.                                   " put up as 'X'
      X_SORT-SUBTOT = 'X'.                      " Sub total allowed
      APPEND X_SORT TO IT_SORT.          "append
      CLEAR X_SORT.                                "clear x_SORT
    "in ALV_GRID_DISPLAY pass the it sort in it_SORT
    IT_SORT                 =   IT_SORT
    Thanks
    Arun Kayal

  • Sales order Number not appearing in CO-PA report painter

    Hi
    I have prepared profitability report through report painter through t-codes KE34 and KE31-
    Characteristics I have chosen is Sales order No/Plant/sales organization/product and customer-
    In the report Sales order Number is not appearing?
    We are able to see plant number/sales organization no/product no and customer no-
    Where I have committed mistake
    Thanks in advance
    joseph david

    HI,
    In order for you to see Characteristics in KE34 form definition, they have to be defined as 'Segment level' in KEQ3, as also metioned by Christian. However, it is not advisable to define 'Sales order #' as a Segment level, considering that 'Sales order #', changes frequently and also owing to performance issues with huge number of Segment level records which gets created in the course of time.
    If you want to report based on Sales order, then please consider using line item form/report KE94/KE91 or check if KE24 is sufficient.
    Hope this helps.

  • FSV item(GL) not appearing in drilldown mode of report painter

    Hi,
    Actually i have added GL account of Cash on hand in FSV of the client and have assigned the same in the balance sheet report in report painter.
    However i am not able to see the line items of the Cash on hand GL which i have assigned in the report painter.
    Also the report painter is picking up the values from the Cash on hand GL but is not showing me the line items of that particular GL.
    What can be the reason?
    Parin

    Hi,
    One question.... Is this a Select List or a Popup LOV?
    The settings to check are:
    Source Used: Always,....
    Source Type: Database Column
    Source value or expression: The field name the table
    The List of Values section should also contain valid settings - You should either have a Named LOV selected or specified a select statement in the List of values definition setting.
    You should also check to see if there is any Default value or a Post Calculation Computation that may be clearing the field.
    Andy

  • /TD is appearing in the HTM document when downloaded from Report painter

    Hi,
    We are facing the below issue when we are downloading the report painter report in HTM format.
    When I am downloading a report in HTM format (Web page or Excel) I see some special characters u201C/TD>u201D in the HTM download document. I am able to download this report in other clients and landscapes without any special characters.
    % Standard Cost of Sales     1.547      56.669  /TD>
    % Gross Margin     94.982      27.601 
    % Selling, Admin. & General     19.723      9.290  /TD>
    Thanks and Regards,
    Deepa

    Check the following notes helps you
    =>  Note 1460343 - RW: Unicode and export of report to file
    =>  Note 1522758 - RW: Unicode and export to application server
    thanks
    G. Lakshmipathi

  • Strange discrepancy in report painter

    Hi everyone,
    I've designed a report painter with all the respective columns & formulas intact but at the Grand Total col (summation of all the sub-totals), the figure doesn't tally with all the sub-totals. All sub-totals have been added correctly but when they are added up to the Grand Total, the fig doesn't tie.
    Any clues? Have I missed out something?

    Hi Andrew,
    I've checked the sub-totals and apparently, when i double click on a sub-total to drill down to line item lvl, the fig doesn't seem to tie in with what I see in the report painter report. It's real strange that the correct fig appears upon drilling down to line item level but at a higher level, the fig isn't right. It's short of a fig which is in relation to another column.
    I've double checked the formula at the sub-total col and all the cols in the formula are present. This is the bizarre thing which I've been trying to resolve for the past few days.
    Best Regards,
    Ethan

Maybe you are looking for