X-Axis Scales and Dates Issue

Hello, really hoping that someone can help me.
I have a crystal reports report with a chart. The chart uses dates as the x-axis and numeric values on the y-axis.
All I want to do is change the x-axis sacle to be 14 day intervals.
Seems simple enough. I go into group(x) axis options, click the scales tab and try to chage the values (after unticking auto scale). Crystal will not let me change it to be 14 days, and it ignores the remove autoscale. It just constantly sets it back to autoscale everytime.
I tried the exact same thing but with numbers on the x-axis, and it worked fine, no problem at all with setting the scale to whatever I wanted. But when the x-axis is dates, it doesn't work.
I have been on for 3 whole weeks trying to find a solution to this.
If anybody can help me I would be very grateful
Thank you

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly

Similar Messages

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

Time and Date Issues

Ok every time I turn on my iPod Touch its the wrong date and time! I have no idea whats going on. But ever sense I bought simcity this has been happening!! Then at about noon it changes to the right time and date! Thanks A lot for your help!

F Shippey wrote:
Say WHAT? That's totally ridiculous advice.
it USED to be true. but the ipod touches contain a different type of battery to the older ones, which actually benefit from 'topping up' the charge regularly rather than letting it run down.
Message was edited by: Anna Sandham

6210 navigator - screensaver and date issues.

number one:
is there any way to get the date to show on the standby screen when the selected profile is silent. its very annoying as i regularly check the date on my phone and i have to have it on silent as im a student. i notice the date shows when the profile is set to general.
general profile screenshot: http://www.ringnokia.com/images/annoyance0001.jpg
silent profile screenshot:
http://www.ringnokia.com/images/annoyance0002.jpg
number two:
is to do with the screensaver, i have the "power saver" set to the date (which i presume is the screensaver setting, as it used to be set as "animation") then i go into "phone sett" -> general -> personalisation -> display -> screensaver, and i have it set to time-out after 30 seconds then i have set the duration to "always". however after 30 seconds the screensaver comes on, then after another few seconds it just goes to a blank screen. how do i solve this so that the screensaver stays on the whole time?
thanks.

Hi.Im having problems with my navigator 6210 every time i turn the phone off i have to reset the time and date the phone is set on auto time update but everytime i turn it off i have to reset the time and date.. i recently updated the firmware but i still have to reset the time and date is this normal? seems weird to me my network provider is vodafone Australia
thanks for you help
Santiago
Sydney Austalia

Clock and Date issues!!

Everytime I connect the Touch to my computer it changes the date and hour on the ipod itself to a different one and I have to set it every time manually when I disconnect it. help anyone!?!

Question answered here:
http://discussions.apple.com/thread.jspa?threadID=1215249
You need to close and re-open iTunes before connecting the iPod to the computer. That solved the issue for me.

TS4526 Found a fix for the time and date issue

ROKU GEN 3

I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks

PO Print out and data issue in Aribic Language -AR

Hi Guru,
Thanks in advance..........
I am facing problem in PO print out in AR language.
When i print Compnay phone no. of PO in E language is printing correct like - +962 4400402
But i select message type 'AR' then Company Phone No. printing like this - 96264420404+.
Can any one can suggest we have any FM for converting telephone no. in AR language in same format - like +962 4400402.
Regards
Durgesh

Hi,
I think it is the issue of text wrapping.
Are you using different text elements to display this text or same in both languages?
Thanks,
Archana

Email and data issue posible fix

I received a call today from verizon network support for my trouble ticket from the 18th. While they stated the continue to find a permanent fix, they suggested i to go to my settings, advanced settings host routing table push the bb key and select register now. It helped with one of our blackberry curves that was still down. May want to give it a try

Thanks, JB4trucks!

Time and Date keeps changing

Every time I connect my ipod touch 2.1.1 the date and time keeps changing. is it a glitch? i also tried restoring my ipod but it didnt help, so please fix this

Thanks. This solves the time and date issue. But I still have a problem when I do the following: Settings>General>Time & Date, then the main screen (with all of the icons) is displayed, I never see the time, date screen, it goes back after about 1 second to main screen The same thing happens when I do the following: Settings>Mail, Contacts, Calendar>I then scroll to the bottom of the page and I get the main page again. I never get to touch on contacts or calendar, only mail. Please help.

How to display a fixed min and open max Y axis scale on obiee 11g

Hi,
I am stuck with an issue.
Obiee by default is plotting my bar chart with Y axis scale from -50 to 850 with and interval of 100.
In the graph non of the value is negative of below zero. The graph too plots all the points above 0, even then it starts the Y scale from -50, not sure why?
I wanted to know whether we can by anyway limit the y axis scale with lower limit to 0 and still keep the upper limit open or undefined.
Please let me know if any of you have come across such scenarios?
Thanks

> I want to plot log(log(y)) vs x. On the y-axis of the graph I need to
> display 'y', NOT log(y) or log(log(y)). How do I adjust the scale to
> allow for this?
>
> {I do realize that I can plot log(y) vs x and display 'y' by using the
> Logarithmic scale option.}
Not being that familiar with the typical labeling on log(log) plots, you
may be able to do this using two scales. Make a graph that contains two
scales. One will be plotted against, the other will be just for labeling.
You can now transform your diagram data, which will change how the mapped
scale is labeled, but the other scale can show whatever you like in linear
or log form.
In otherwords, on the diagram, perform log10 on your data, then display on
a log scale that is hidden. Make another scale vi
sible with linear or log
data. Or perform log10(log10) on your data, display on a hidden linear
scale.
I'm not sure how well this will work. If it is insufficient, you can submit
a feature request on the web site.
Greg McKaskle

When I upload large streams of high frequency data the x axis scales incorrectly

I have data at 5 kHz for 20 seconds. when I upload this data into the report tab the x axis scales incorrectly and cuts off either the head or tail of the data. The x axis always rounds to the nearest second while i need it to start with the data. Any ideas?

Hi wpruitt3,
Take a look at this knowledge base article.
Best,
Kristen

Y Axis scale issue

Hi there,
I've a dynamically driven (through XML) column chart. everything works just fine except the Y axis scale. depending on the data it changes the divisions and some times it looks very odd.
I tried with Auto (Y) axis option then tried giving manual values by determining the MIN and MAX values through XL formulas, but no luck.
Also tried setting the number of divisions to say 6 - unfortunately, it doesn't seem be listening to any of these settings.
Is there any other better way to control this?
please advice
Malik

Hi Prashant Khadatkar,
As per my understanding, you created a line chart, you added JobStartTime and JobEndTime to values area, and added JobStartDate to category groups. You want to display data of y axis from PM to AM. In order to improve the efficiency of troubleshooting, I
need to ask several questions:
What’s the data type of JobStartTime and JobEndTime?
Is the data stored in database the same as you provided?
What’s the state of report now? Please provide some more detailed information of the report. I would be appreciated it if you could provide sample data and screenshot of the report.
This may be a lot of information to ask for at one time. However, by collecting this information now, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Oracle Report Graph flexible minimum and maximum y axis scale values

I have a report that generates graphs based on a group column , i want to set the y format min and max scales of the graph of each graph generated as the max and min of the group data from which each graph is created.
there is one graph control in the repeater and it generates several graphs based on the group column, from the properties i can set one y format min and max scale for all the graphs that will be generated in the repeator
can i some how set in format trigger each time the repeator runs and i set the min and max values of the graph y axis scales.
Please help.

Any Experts here.. Please help

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

X-Axis Scales and Dates Issue

Similar Messages

Maybe you are looking for