X'ed out Objects in Lookout 5.0

Recently our FP-1601 module took a blackout. Since then one of our Lookout 5.0 screens has red X'ed out objects. I verified that I can ping the FP-1601 module from the Lookout computer and can also view it as running in the FP-Explorer. Is it possible Lookout 5.0 is confused and needs to be reset to see the objects? How can I verify that I can poll the objects? Thanks in advance.

The "nonexistent, access denied" message would imply (I am guessing here) that the Process is unreachable.
For you to find out if you're using the OPCFieldPoint or the native FieldPoint, you would have to go into Edit mode, and then in the Object Explorer from the Object menu. Here, you should see your FP Objects. Right-click them and go into properties to find out what kind of an object they are.
You can also find this info' from the LKS file. Look for the "new" keyword in there.
Connection browser, again under the Object menu in Edit mode, lets you see the relationships between various objects and processes. Looks like you're having problems because not all of your processes are running. El
iminate this possibility by making sure all your processes are running. We shall then see if you still get the red Xs.
Khalid

Similar Messages

X'ed out objects on screen.

Recently our Windows XP computer crashed due to a black out. Since then one of our control screens (Lookout 5.0) has x'ed out objects and we can't control. I have gone through the field point (FP-1601) explorer and verified that I can ping it and view it in the explorer. Any thoughts are greatly appreciated. If the FP-1601 suffered the blackout as well is it possible it needs to FP rack/rail needs to be reset. And how do you properly reset a FP-1601 rack?

You can perform a reset on a FP-1601 by cycling power to the module. This forces the module to reboot and clear the RAM. To reset all of the saved configurations, flip the reset switch (DIP switch 8) to the On position and then power the module. Once the Status LED starts flashing, remove power to the module, disable the reset switch, and power the module back on. At this point you will need to reconfigure the ethernet settings of the FP-1601.
Regards,
Aaron

Problem to check out object in siebel 8.1, using Windows Vista

Hi people,
i'm quite new to siebel and recently, i am supposed to start developing applets and BCs. The problem is, i cant check out object from the server. whenever i hit the button Check Out, the system (Siebel 8.1) is hang and stop responding. Can anyone help me on this? Thank you so much.
Zaly#

Hi,
i've tried both ODBC, SSD Default instance and SSD Local Db default instance. Both yielded same result, which the connection is successful. But for SSD Default Instance, whenever i tried to hit the button 'Test Connect' for 2nd time or more, it will stop responding and hang. Only the first time is succesful.
I really dont have the idea how the problem occurs. but it works well if i do check out in computer that runs on window XP. Is the problem comes because i'm using vista?

How do you install Spreadsheet object in lookout?

I was wondering if anyone can help me, i am very new to Lookout. I want to use spreadsheet objects in Lookout. I have been given some examples to show how to use it, but i am unsure where these files should be stored. i have stored them in the lookout directory, but nothing happened, do i need to compile the files?
any help or direction would be much appreciated.

Please don't edit the codes in .lks file. Everything is done in Lookout software, not the notepad!
The attached pdf is a good manual to learn some basic programming.
If you want to create a new pot, goto menu bar, Object->Create... select Pot, and then do the configuration.
If you want to add or change the data field of the spreadsheet object, follow the attached instructions. Select (new field), right click on the yellow bar, choose the pot or object you want to log, then click Save.
Ryan Shi
National Instruments
Attachments:
350379e.pdf ‏570 KB
untitled1.JPG ‏109 KB
untitled2.JPG ‏48 KB

Clipping Out Objects

I know this may be a very redundant subject, but I was wondering if anyone knew about a very precise and fast way to clip out objects? I am aware of using clipping masks, lasso selecting tool, and drawing paths. Personally I think drawing paths or using the lasso selector tool and eyeballing is the most precise - but not very quick. I sometimes use the path detecting tool in Photoshop and Indesign - which are quick but not very precise? Is there a to clip out items from photos that are quick and precise without using other tools like a green screen? Thanks for any help!

Hi Daveydave.
The trick to getting precise masks is to use the channels palette. Choose the channel with the best edge contrast for the shape you are cutting out and dupe it. Then work on increasing the contrast further until it is almost all black and white (reducing the greys). There are numerous ways to increase the contrast. I usually start with a selection made using the lasso tool well within the object edge and filling it with black then a fill of white well outside the edge of the object. Then there is just the edge itself to deal with. Initially using 'apply image' is useful for refining the contrast and picking out the edge, but also the dodge and burn tools can do the job. When you have refined the duplicate channel. Make a selection and then turn it into a layer mask. Hej presto a precise editable cutout.
The above may sound tedious but it actually only takes a few minutes.
I recommend you look at Katrin Eismann's 'Masking and Composition'.

Cannot access out object Help Pls

Hi
In my jsp page , i had created some functions .. in those functions i am not able to access the out object
( out.println(" ")) . can any one of u explain me why i am not able to acces that ??.. i had attached the error given by the webserver . pls help me :)
Error Message Given by webserver --> Undefined variable or class name: out out.println( cal +" "+ iStartTime+" "+ iStartMin+" "+ iStartSec+" "+iEndTime+" "+iEndMin+" "+iEndSec);

Thanks for ur reply .. but i had already included that in my jsp files ....
pls see my declaration ..
<%@ page import="java.io.*"%>
<%@ page import="java.util.*"%>
<%@ page import="java.util.Date"%>
<%@ page import="java.sql.*"%>
<%@ page import="javax.servlet.*"%>
<%@ page import="javax.servlet.http.*" %>
I cannot access the out class ONLY in the function i had declared .. i can access the out class in other parts of the program

Fieldpoint object in Lookout

Hello
I have set up my FP1601 with a AI card and a TC card in MAX and saved the configuration to the .iak file. When I create an FieldPoint object in Lookout there is this option to import the iak file. If i choose not to import the file, but rather configure all the seperate channels on the cards in Lookout, which settings are the present ones? And if the FieldPoint for some reasen looses power, will the settings in Lookout be applied again?

Ok. Thanks for the answer
But do I really have to configure the IO cards at all in MAX or Fieldpoint explorer? What I`m a little confused about is the relationship between the Lookout settings and the configuration in the IO cards.
Lets take this ex.: I put up a new FP1601 with 5 TC cards. Configure the FP module with the right IP etc. I dont do anything with the TC cards... Then I Start Lookout and configure each TC card in there.
Will that work or do I have to first configure the TC cards in MAX\FP explorer?

Commands for RUN Object in Lookout

I would like to know all the DOS commands that can be executed by an RUN object in Lookout 5.1.Is there a document for the syntax of these commands?

Ok i have things running sort of.
I have a datasocket that reads a local text file.
I have a Run object that gets a file from the network and copies it to the local hard drive (as the text file above)
The run command is linked to a Radio button array (of 10), so that when a radio button is clicked, the run command
executes.
The problem i am having is that after the file is transferred to the local hard drive, i now want to display the information in
the text file using the datasocket.
If i set the Connect & Update members of the datasocket object to the radio button object i get the run command but
not the display of the updated data from the text file.
I have added a pushbutton that can be pushed after the file transfer occurs which is linked to the Connect & Update members
of the datasocket object. This works fine but i would really like to eliminate the need to click the pushbutton after the radio
button has been clicked.
Is there some way that allows the display of the datasocket object using just the radio buttons?
Is there some way to build in a pause of the display to ensure that the data transfer has been completed?
Also, is there some way that the run command can be triggered by the radio buttons but also every minute if
no radio button has been clicked. (the data on the server may have been updated for the selected radio button)
frank

Communication problem with Modbus object in Lookout 3.8

What means the error code 06 besides the following alarm message NO COMMUNICATION RESPONSE FROM MODBUS SECONDARY ? Lookout runtime-express version 3.8 build 7

Greetings,
The alarm message "No Communication response from modbus secondary" means that communication cannot be established between the modbus object and your external device. Verify that you have set up the serial port settings properly and that you have configured the modbus object. Verify that your external device is functioning properly and connected to the PC. If all of these things are ok, you may need to increase the receive gap of the serial port settings and the receive timeout of the modbus object. There is a tutorial on the web which outlines the troubleshooting steps for communication in Lookout.
http://zone.ni.com/devzone/conceptd.nsf/webmain/033CD84BAC7E1E7586256A3300756284?opendocument
I hope this information is helpful. Have a good day!
Patrick R.

Web service proxy - how to use server side in/out objects

We have logic in oracle database. We have pl/sql api with oracle object types as in/out parameters. On server side we have pojo classes with method to convert from/to sql structs, arrays.
pl/sql apis are exposed as web services.
When I create web service proxy, all required pojo classes are created from wsdl on client side.
Currently we are also writting client part of the code(where we also have oracle database and we want to reuse server pojos). Server pojo classes are in separate jar file and used also on a client side.
Is it possible to tell jdeveloper when creating web service proxy, to not create client side pojos, exception classes, ... , but use those from jar file.
Currently I just copy server pojo over generated client ones, make some modifications and it works. But each time I regenerate web service proxy I have to do this step manually.
Edited by: zgrega on Sep 24, 2010 7:43 AM
Edited by: zgrega on Sep 24, 2010 7:47 AM

best is to wrap the generated WS proxy in a JavaBean. This way you can create the exception handling once and apply it to all uses of the WS proxy by overriding the generated code
Frank

Can more than one build in or out object appear/ disappear simultaneously?

I have objects (images and text boxes) appearing one at a time but I would like them all to disappear simultaneously so is there some way you can group objects to appear and disappear at the same time?
Thanks
Kevin

[email protected] wrote:
Just a couple of questions first, when you mentioned "Set all the Build Outs to occur together." How do I actually do that? I tried highlighting them all and right clicking to see if it gives me an option to do that and look everywhere but couldn't find that function.
Again, if I'm understanding you, this is a very straightforward effect to produce. In the Build Inspector, set up all the Build Ins for the objects, then specify the Build Outs. Now click on the More Options button, which will reveal the Build Order drawer. For each of the Build Outs except the first, select the build in the order listing, then in the Start Build drop down menu, choose "Automatically with build #", where "#" is the number of the first Build Out.

Average Object in Lookout

Hello folks, I need an assistance.
Can I run average object (Lookout 6.0.2) for calculate the average of a variable that changes its value 20 times per second, during 10 to 20 seconds?
In other words: The result of the average calculation of a variable that changes its value 20 times per second will be a valid number if the average object is reset every 20 seconds? There will be 400 values (samples?) as source for average calculation.
The object help wasn't too explicit.
Any comment will be appreciated.

The internal timer of this object is hard-coded. The frequency is 1hz......
So, the max sample rate is 1hz, which means it can only sample and calculate 1 data update per second, even if you connect a 20hz pulse to "Enable".
Sorry.
Ryan Shi
National Instruments

Reflectively obtain an inner object's outer object

So, I have an object which is an instance of an inner class. I need to find reflectively the instance of the outer class which is associated with it.
I might not be seeing the wood for the trees here but I can't see how. Effectively I need an object equivalent of "Class.getDeclaringClass()"
An example to help explain, if required:
public class FindOuterObject
     public static void main(String[] args)
          new FindOuterObject();
     private FindOuterObject()
          InnerObject i = new InnerObject();
          Object o = findOuterObject(i);
          System.out.println((o == this) ? "Worked" : "Failed");
     private static Object findOuterObject(Object innerObject)
          // Need to fill in this method to work for any object passed in
          return null;
     public class InnerObject
}

I'd say that hints at a problematic design.
And I'd wholeheartedly agree :o)
It's a little fudge I'm just currently tring to do. I've got a 'toggle' action which needs to maintain its state, and I want to keep any associated buttons (typically JCheckBoxMenuItems) updated according to the toggle state (which can be modified in several ways).
The code currently whips through the PropertyChangeListeners looking for buttons and calling "setSelected()" as appropriate, but the PCL registered by a JMenuItem is an inner object. I need to call a method on the button object.
I'm contractually obliged to work with 1.4.2 so I can't take advantage of the new Swing functionality to do this automagically.
I'm looking for another workaround and it's not desperately important anyway but I thought it was an interesting poser nonetheless :o)

Find out object in buffered image cature by JMF

hi friends ..
i doing one project in which i want to simulate real time object motion in java 2d ..
for this using web cam i success fully capture image and buffered in pixel array ....
now i want object coordinate to simulate it in 2d .. ..
imagine human motion . and i want simulate it in form of human skeleton ... so make a skeleton i want coordinate
and by change coordinate frame by frame .. i want to simulate it ..
so suggest some thing relevant ..
thanks in advance ..

user5228856 wrote:
the solution you give me l give me a all out report ,
what i need is
select <<>>
from <<>>
where object_name = owner.object_name
result set should return what all db user has select priv on the given object.site below contains desired code
http://www.petefinnigan.com/tools.htm

Need query to find out object Accessibility

Hi Gurus,
I am in need of a query that can show object accessibiliy .i.e
given table can be accessed by which all oracle users.
it should take into account grants given by roles.
Please help.
Regrads

user5228856 wrote:
the solution you give me l give me a all out report ,
what i need is
select <<>>
from <<>>
where object_name = owner.object_name
result set should return what all db user has select priv on the given object.site below contains desired code
http://www.petefinnigan.com/tools.htm

X'ed out Objects in Lookout 5.0

Similar Messages

Maybe you are looking for