X (Fatal Error)

Im having a little bit of trouble getting X to start on a HP OmniBook XE2 laptop. First and foremost, here is the Xorg log:
[ 35.602]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 35.603]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 35.604] X Protocol Version 11, Revision 0
[ 35.604] Build Operating System: Linux 2.6.34-ARCH i686
[ 35.604] Current Operating System: Linux myhost 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
[ 35.604] Kernel command line: root=/dev/sda1 ro
[ 35.604] Build Date: 21 June 2010 11:54:27AM
[ 35.605]
[ 35.623] Current version of pixman: 0.18.2
[ 35.624] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.624] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.625] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 7 07:15:31 2011
[ 35.670] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 35.687] (==) No Layout section. Using the first Screen section.
[ 35.687] (==) No screen section available. Using defaults.
[ 35.687] (**) |-->Screen "Default Screen Section" (0)
[ 35.688] (**) | |-->Monitor "<default monitor>"
[ 35.688] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 35.689] (==) Automatically adding devices
[ 35.689] (==) Automatically enabling devices
[ 35.728] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 35.728] Entry deleted from font path.
[ 35.728] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 35.728] Entry deleted from font path.
[ 35.728] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 35.728] Entry deleted from font path.
[ 35.729] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 35.729] Entry deleted from font path.
[ 35.729] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 35.729] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 35.729] Entry deleted from font path.
[ 35.729] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 35.729] (==) FontPath set to:
/usr/share/fonts/misc/
[ 35.730] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 35.730] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 35.730] (II) Loader magic: 0x81e9d00
[ 35.730] (II) Module ABI versions:
[ 35.730] X.Org ANSI C Emulation: 0.4
[ 35.730] X.Org Video Driver: 7.0
[ 35.730] X.Org XInput driver : 9.0
[ 35.730] X.Org Server Extension : 3.0
[ 35.778] (--) PCI:*(0:1:0:0) 126f:0710:103c:000e Silicon Motion, Inc. SM710 LynxEM rev 163, Mem @ 0xfd000000/16777216
[ 35.779] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 35.779] (II) LoadModule: "extmod"
[ 35.782] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 35.792] (II) Module extmod: vendor="X.Org Foundation"
[ 35.792] compiled for 1.8.1.902, module version = 1.0.0
[ 35.792] Module class: X.Org Server Extension
[ 35.792] ABI class: X.Org Server Extension, version 3.0
[ 35.792] (II) Loading extension MIT-SCREEN-SAVER
[ 35.792] (II) Loading extension XFree86-VidModeExtension
[ 35.792] (II) Loading extension XFree86-DGA
[ 35.792] (II) Loading extension DPMS
[ 35.792] (II) Loading extension XVideo
[ 35.792] (II) Loading extension XVideo-MotionCompensation
[ 35.792] (II) Loading extension X-Resource
[ 35.792] (II) LoadModule: "dbe"
[ 35.793] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 35.802] (II) Module dbe: vendor="X.Org Foundation"
[ 35.803] compiled for 1.8.1.902, module version = 1.0.0
[ 35.803] Module class: X.Org Server Extension
[ 35.803] ABI class: X.Org Server Extension, version 3.0
[ 35.803] (II) Loading extension DOUBLE-BUFFER
[ 35.803] (II) LoadModule: "glx"
[ 35.803] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 35.812] (II) Module glx: vendor="X.Org Foundation"
[ 35.812] compiled for 1.8.1.902, module version = 1.0.0
[ 35.812] ABI class: X.Org Server Extension, version 3.0
[ 35.819] (==) AIGLX enabled
[ 35.819] (II) Loading extension GLX
[ 35.819] (II) LoadModule: "record"
[ 35.819] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 35.821] (II) Module record: vendor="X.Org Foundation"
[ 35.821] compiled for 1.8.1.902, module version = 1.13.0
[ 35.821] Module class: X.Org Server Extension
[ 35.821] ABI class: X.Org Server Extension, version 3.0
[ 35.821] (II) Loading extension RECORD
[ 35.822] (II) LoadModule: "dri"
[ 35.822] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 35.840] (II) Module dri: vendor="X.Org Foundation"
[ 35.840] compiled for 1.8.1.902, module version = 1.0.0
[ 35.840] ABI class: X.Org Server Extension, version 3.0
[ 35.840] (II) Loading extension XFree86-DRI
[ 35.840] (II) LoadModule: "dri2"
[ 35.841] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 35.842] (II) Module dri2: vendor="X.Org Foundation"
[ 35.842] compiled for 1.8.1.902, module version = 1.2.0
[ 35.842] ABI class: X.Org Server Extension, version 3.0
[ 35.843] (II) Loading extension DRI2
[ 35.843] (==) Matched siliconmotion as autoconfigured driver 0
[ 35.843] (==) Matched vesa as autoconfigured driver 1
[ 35.843] (==) Matched fbdev as autoconfigured driver 2
[ 35.843] (==) Assigned the driver to the xf86ConfigLayout
[ 35.843] (II) LoadModule: "siliconmotion"
[ 35.873] (II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
[ 35.877] (II) Module siliconmotion: vendor="X.Org Foundation"
[ 35.878] compiled for 1.8.0.902, module version = 1.7.4
[ 35.878] Module class: X.Org Video Driver
[ 35.878] ABI class: X.Org Video Driver, version 7.0
[ 35.878] (II) LoadModule: "vesa"
[ 35.879] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.893] (II) Module vesa: vendor="X.Org Foundation"
[ 35.893] compiled for 1.8.0, module version = 2.3.0
[ 35.893] Module class: X.Org Video Driver
[ 35.893] ABI class: X.Org Video Driver, version 7.0
[ 35.893] (II) LoadModule: "fbdev"
[ 35.895] (WW) Warning, couldn't open module fbdev
[ 35.895] (II) UnloadModule: "fbdev"
[ 35.895] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 35.895] (II) SMI: driver (version 1.7.4) for Silicon Motion Lynx chipsets: Lynx,
LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC
[ 35.895] (II) VESA: driver for VESA chipsets: vesa
[ 35.896] (--) using VT number 7
[ 35.898] (II) Primary Device is: PCI 01@00:00:0
[ 35.898] (WW) Falling back to old probe method for siliconmotion
[ 35.898] (--) Assigning device section with no busID to primary device
[ 35.899] (--) Chipset LynxEM found
[ 35.899] (WW) Falling back to old probe method for vesa
[ 35.899] (II) Loading sub module "vgahw"
[ 35.899] (II) LoadModule: "vgahw"
[ 35.900] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 35.902] (II) Module vgahw: vendor="X.Org Foundation"
[ 35.902] compiled for 1.8.1.902, module version = 0.1.0
[ 35.902] ABI class: X.Org Video Driver, version 7.0
[ 35.902] (II) SMI(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 35.902] (==) SMI(0): Depth 24, (--) framebuffer bpp 32
[ 35.902] (==) SMI(0): RGB weight 888
[ 35.902] (==) SMI(0): Default visual is TrueColor
[ 35.902] (==) SMI(0): PCI Burst enabled
[ 35.902] (==) SMI(0): PCI Retry enabled
[ 35.902] (==) SMI(0): Using Hardware Cursor
[ 35.902] (II) Loading sub module "int10"
[ 35.903] (II) LoadModule: "int10"
[ 35.904] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 35.908] (II) Module int10: vendor="X.Org Foundation"
[ 35.908] compiled for 1.8.1.902, module version = 1.0.0
[ 35.908] ABI class: X.Org Video Driver, version 7.0
[ 35.913] (II) SMI(0): Primary V_BIOS segment is: 0xc000
[ 35.914] (II) Loading sub module "vbe"
[ 35.914] (II) LoadModule: "vbe"
[ 35.914] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 35.922] (II) Module vbe: vendor="X.Org Foundation"
[ 35.922] compiled for 1.8.1.902, module version = 1.1.0
[ 35.922] ABI class: X.Org Video Driver, version 7.0
[ 35.922] (II) SMI(0): VESA BIOS detected
[ 35.922] (II) SMI(0): VESA VBE Version 2.0
[ 35.923] (II) SMI(0): VESA VBE Total Mem: 4096 kB
[ 35.923] (II) SMI(0): VESA VBE OEM: Silicon Motion SM710 VGA BIOS
[ 35.923] (II) SMI(0): VESA VBE OEM Software Rev: 2.0
[ 35.923] (II) SMI(0): VESA VBE OEM Vendor: SM710
[ 35.923] (II) SMI(0): VESA VBE OEM Product: SM710
[ 35.923] (II) SMI(0): VESA VBE OEM Product Rev:
[ 35.923] (--) SMI(0): Chipset: "LynxEM"
[ 35.923] (==) SMI(0): Dual head disabled
[ 35.923] (==) SMI(0): Using XAA acceleration architecture
[ 35.924] (--) SMI(0): videoram: 4096kB
[ 35.925] (II) SMI(0): Cursor Offset: 003FFC00
[ 35.925] (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 35.925] (II) SMI(0): Reserved: 003FF800
[ 35.925] (II) SMI(0): TFT Panel Size = 1024x768
[ 35.925] (II) Loading sub module "i2c"
[ 35.925] (II) LoadModule: "i2c"
[ 35.925] (II) Module "i2c" already built-in
[ 35.925] (II) SMI(0): I2C bus "I2C bus" initialized.
[ 35.926] (II) Loading sub module "ddc"
[ 35.926] (II) LoadModule: "ddc"
[ 35.926] (II) Module "ddc" already built-in
[ 35.926] (==) SMI(0): Using gamma correction (1.0, 1.0, 1.0)
[ 35.926] (II) SMI(0): MCLK = 85.909
[ 35.926] (II) SMI(0): Output LVDS has no monitor section
[ 35.927] (II) SMI(0): Not using default mode "640x350" (vrefresh out of range)
[ 35.927] (II) SMI(0): Not using default mode "320x175" (doublescan mode not supported)
[ 35.927] (II) SMI(0): Not using default mode "640x400" (vrefresh out of range)
[ 35.927] (II) SMI(0): Not using default mode "320x200" (doublescan mode not supported)
[ 35.927] (II) SMI(0): Not using default mode "720x400" (vrefresh out of range)
[ 35.927] (II) SMI(0): Not using default mode "360x200" (doublescan mode not supported)
[ 35.927] (II) SMI(0): Not using default mode "640x480" (exceeds panel dimensions)
[ 35.927] (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
[ 35.927] (II) SMI(0): Not using default mode "640x480" (vrefresh out of range)
[ 35.927] (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
[ 35.927] (II) SMI(0): Not using default mode "640x480" (vrefresh out of range)
[ 35.928] (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
[ 35.928] (II) SMI(0): Not using default mode "640x480" (vrefresh out of range)
[ 35.928] (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
[ 35.928] (II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
[ 35.928] (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
[ 35.928] (II) SMI(0): Not using default mode "800x600" (exceeds panel dimensions)
[ 35.928] (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
[ 35.928] (II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
[ 35.928] (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
[ 35.928] (II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
[ 35.928] (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
[ 35.928] (II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
[ 35.928] (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
[ 35.928] (II) SMI(0): Not using default mode "1024x768i" (interlace mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "512x384i" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1024x768" (hsync out of range)
[ 35.929] (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1024x768" (vrefresh out of range)
[ 35.929] (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1024x768" (vrefresh out of range)
[ 35.929] (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1024x768" (vrefresh out of range)
[ 35.929] (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1152x864" (vrefresh out of range)
[ 35.929] (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1280x960" (hsync out of range)
[ 35.929] (II) SMI(0): Not using default mode "640x480" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1280x960" (vrefresh out of range)
[ 35.929] (II) SMI(0): Not using default mode "640x480" (doublescan mode not supported)
[ 35.929] (II) SMI(0): Not using default mode "1280x1024" (hsync out of range)
[ 35.930] (II) SMI(0): Not using default mode "640x512" (doublescan mode not supported)
[ 35.930] (II) SMI(0): Not using default mode "1280x1024" (vrefresh out of range)
[ 35.930] (II) SMI(0): Not using default mode "640x512" (doublescan mode not supported)
[ 35.930] (II) SMI(0): Not using default mode "1280x1024" (vrefresh out of range)
[ 35.930] (II) SMI(0): Not using default mode "640x512" (doublescan mode not supported)
[ 35.930] (II) SMI(0): Not using default mode "1600x1200" (hsync out of range)
[ 35.930] (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
[ 35.930] (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 35.930] (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
[ 35.930] (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 35.930] (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
[ 35.930] (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 35.930] (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
[ 35.930] (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 35.930] (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "1792x1344" (hsync out of range)
[ 35.931] (II) SMI(0): Not using default mode "896x672" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "1792x1344" (vrefresh out of range)
[ 35.931] (II) SMI(0): Not using default mode "896x672" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "1856x1392" (hsync out of range)
[ 35.931] (II) SMI(0): Not using default mode "928x696" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "1856x1392" (vrefresh out of range)
[ 35.931] (II) SMI(0): Not using default mode "928x696" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "1920x1440" (hsync out of range)
[ 35.931] (II) SMI(0): Not using default mode "960x720" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "1920x1440" (vrefresh out of range)
[ 35.931] (II) SMI(0): Not using default mode "960x720" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "832x624" (vrefresh out of range)
[ 35.931] (II) SMI(0): Not using default mode "416x312" (doublescan mode not supported)
[ 35.931] (II) SMI(0): Not using default mode "1400x1050" (hsync out of range)
[ 35.932] (II) SMI(0): Not using default mode "700x525" (doublescan mode not supported)
[ 35.932] (II) SMI(0): Not using default mode "1400x1050" (vrefresh out of range)
[ 35.932] (II) SMI(0): Not using default mode "700x525" (doublescan mode not supported)
[ 35.932] (II) SMI(0): Not using default mode "1920x1440" (vrefresh out of range)
[ 35.932] (II) SMI(0): Not using default mode "960x720" (doublescan mode not supported)
[ 35.932] (II) SMI(0): Not using default mode "2048x1536" (hsync out of range)
[ 35.932] (II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 35.932] (II) SMI(0): Not using default mode "2048x1536" (vrefresh out of range)
[ 35.932] (II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 35.932] (II) SMI(0): Not using default mode "2048x1536" (vrefresh out of range)
[ 35.932] (II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 35.932] (II) SMI(0): Printing probed modes for output LVDS
[ 35.932] (II) SMI(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 35.932] (II) SMI(0): Output LVDS connected
[ 35.933] (II) SMI(0): Using fuzzy aspect match for initial modes
[ 35.933] (II) SMI(0): Output LVDS using initial mode 1024x768
[ 35.933] (II) SMI(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 35.933] (EE) SMI(0): Not enough video memory for the configured screen size (1024x1024) and color depth.
[ 35.934] (II) UnloadModule: "siliconmotion"
[ 35.934] (II) UnloadModule: "vbe"
[ 35.934] (II) Unloading /usr/lib/xorg/modules/libvbe.so
[ 35.934] (II) UnloadModule: "int10"
[ 35.934] (II) Unloading /usr/lib/xorg/modules/libint10.so
[ 35.934] (II) UnloadModule: "vgahw"
[ 35.934] (II) Unloading /usr/lib/xorg/modules/libvgahw.so
[ 35.935] (EE) Screen(s) found, but none have a usable configuration.
[ 35.935]
Fatal server error:
[ 35.935] no screens found
[ 35.935]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 35.935] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 35.935]
I'm not exactly sure what is going on and searching google more or less turned up nothing which is why I am here. The VGA controller shows up as a "Silicon Motion SM710 LynxEM" So I loaded the xf86-video-siliconmotion driver. This may or may not be the correct one. I also downloaded the generic Vesa driver but I am not sure how to actually remove the SiliconMotion and load the Vesa. Thank you so much!!!

Don't forget to use the code tag. It will make your post a lot more readable.
As for a video driver, you might want to read the man page for siliconmotion driver and see if you can't get it to work by manipulating some of its options:
http://www.xfree86.org/4.4.0/siliconmotion.4.html

Similar Messages

Fatal Error while sending a fax

Hello
I'm having this problem with one of my users the company.
we have a fax server that is working almost fine for everyone but one specific user, whenever she tries to send a fax from her client computer, after dialing and when it says Transmitting...a Fatal Error comes up,, Event
ID 32028
I did all the suggested actions by Microsoft and other people in the forum, no luck
today i tried something else, send a fax with same user on another client computer...same error
so this is a user problem..i checked all the permissions and FAX USERS group, it is the same like others
please help!!

Hi,
For Event ID 32028, please refer to following article and check if can help you to troubleshoot this issue.
Event ID 32028 — Sent Fax Status
Meanwhile, please open Registry Editor and follow the path:
HKEY_CURRENT_USER\Software\Microsoft\Fax folder when the problematic user account logon, then compare with other user accounts which can be used to send fax as normal. Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility bu

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.

Hi Maarton,
Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
-Ankit

Fatal Error: missing resource: java.util.PropertyResourceBundle =Urgent

Hi all,
In the JSP ,if I include the statement <%@ page import="jack.samples.*" %>
it is throwing following error:
This is the Error Message from the Exception:
     Server caught unhandled exception from servlet [BaseServlet]: Server caught
     unhandled exception from servlet [CategoryDisplay]: Server caught unhandled
     exception from servlet [jsp]: Fatal Error: missing resource: java.util.PropertyResourceBundle
     I am using Websphere 3.5 on Windows NT.
     can somebody please help me what is going wrong here ???I am stopped at
     this problem for last 2 days.
Thanks
Jack

Hi,
Finally I was able to resolve after adding this jar file to the classfile
path of the application.
Now,I am trying to access use linkTable.add(new Item(222,"222","333",12.33)) in JSP.
where linkTable is a LinkedList.
It fails giving following error:
This is the Error Message from the Exception:
Server caught unhandled exception from servlet [BaseServlet]: Server caught unhandled exception from servlet : Server caught unhandled exception from servlet [jsp]: Compilation of "softproduct.jsp" failed: d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_2.java:824: No constructor matching Item(int, java.lang.String, java.lang.String, double) found in class jack.samples.Item. linkTab.add(new Item(2222,"222","222",22.33)); ^ Note: d:\ibm\WAServer\temp\default_host\WCSServlets\_jameco_2F_softproduct_2E_jsp_jsp_2.java uses or overrides a deprecated API. Recompile with "-deprecation" for details. 1 error, 1 warning
I dont understand why it is failing to add Item object to LinkedList.
can somebody help me in the forum in this regard.
Thanks
Jack

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail

Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
Sasikala

Hi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein

LabView Run-time engine 6.1 fatal error on install in XP Pro

I downloaded an application which uses the LVRTE to decode audio signals and display them graphically. I then downloaded the latest (?) version of the RTE installer for Windows .../XP from the NI site and it shows a version number of 1.1.0.0 if I move the pointer over the file. When I try to install the RTE using this file, I get a small message box with the title "Fatal Error" and the text "Installation ended prematurely because of an error" and no other clues. I've disabled the antivirus s/w (Norton) and the firewall (Zonealarm). I've even searched through the registry to see if there are any entries with either "LabView" or "National Instruments" in them and found nothing.
I'm running a properly li
cenced (yes, I paid real money for it) version of XP Pro with all the latest patches installed.
Any clues as to how to get the thing to install would be gratefully received.
Thanks in anticipation
Frustrated of Scotand

HI Jim,
do not give up. Go here: LabVIEW runtime engines.
You can reach this over Support >> Drivers and Updates >> All Versions ...
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

CMS import for SAP ESS component(SP 15) fails with fatal error.

Hi,
We are working on EP 7.0 SP 15. We have a requirement for changes to be made to SAP delivered ESS codes. We have set up the NWDI and and from the checkin tabn of CMS, the components SAP-JEE (7.00 SP18 ), SAP_JTECHS(7.00 SP18 ), SAP_PCUI-GP(SP 18), EP_BUILDT (7.00 SP18 )and SAP_BUILDT (7.00 SP18 )have been imported successfully to the development tab. But when we try to import the SAP ESS 600(SP level 15) from Checkin tab to the Development tab, the import fails. The exception chain as checked by clicking Details button in teh Develepoment tab of CMS shows the details as:
20090610145206 Info   :Starting Step Repository-check at 2009-06-10 14:52:06.0283 +5:00
20090610145206 Info   :Component:sap.com/SAP_ESS
20090610145206 Info   :Version :MAIN_ERP05PAT_C.20090427083436
20090610145206 Info   :1. propagation request is of type TCSSoftwareComponent
20090610145206 Info   :Propagatable:d647b419330511de9f130030057116fe exists allready in the repository. No import necessary.
20090610145232 Fatal :VcmFailure received
20090610145232 Fatal :caused by Exception:com.tssap.dtr.client.lib.deltavlib.VcmFailure: Internal Server Error [(pre||post)-condition failed: Internal Server Error]:Internal Server Error [(pre||post)-condition failed: Internal Server Error]
com.tssap.dtr.client.lib.deltavlib.VcmFailure: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
     at com.tssap.dtr.client.lib.deltavlib.impl.AbstractCommand.checkedExecute(AbstractCommand.java:196)
     at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:160)
     at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:148)
     at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:544)
     at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
     at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
     at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
     at com.sap.cms.tcs.core.TCSManager.checkPropagationRequests(TCSManager.java:517)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:179)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImportCheck(ImportQueueHandler.java:130)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImportCheck(CmsTransportProxyBean.java:720)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImportCheck(LocalCmsTransportProxyLocalObjectImpl0_0.java:1844)
     at com.sap.cms.ui.wl.Custom1.ImportCheck(Custom1.java:9968)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdInvokeEventHandler(InternalCustom1.java:3156)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.invokeEventHandler(DelegatingCustomController.java:89)
     at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:345)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
20090610145232 Fatal :caused by Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Internal Server Error [(pre||post)-condition failed: Internal Server Error]:communication error: VcmFailure received: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
     at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:563)
     at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
     at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
     at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
     at com.sap.cms.tcs.core.TCSManager.checkPropagationRequests(TCSManager.java:517)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:179)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImportCheck(ImportQueueHandler.java:130)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImportCheck(CmsTransportProxyBean.java:720)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImportCheck(LocalCmsTransportProxyLocalObjectImpl0_0.java:1844)
     at com.sap.cms.ui.wl.Custom1.ImportCheck(Custom1.java:9968)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdInvokeEventHandler(InternalCustom1.java:3156)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.invokeEventHandler(DelegatingCustomController.java:89)
     at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:345)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
20090610145232 Info   :Step Repository-check ended with result 'fatal error' ,stopping execution at 2009-06-10 14:52:32.0796 +5:00
The above log is displayed when I click the import -check button on the development tab of CMS. The same error is displayes when the import button is clicked with only the last sentence changed to:
Step Repository-check ended with result 'fatal error'
Can anyone help me on this.... ?
Thanks,
Sonali.
Edited by: Sonali M S on Jun 10, 2009 1:16 PM

Hi Bala,
The problem still remails even after making changes in Visual Admin as per the thread Re: Assembly finished with errors
Also from http://<server>:<port>/nwa we have run the configuration task for "Initial setup of functional unit Development Infrastructure (DI all-in-one)" and there we donot have the option for individual CBS, CMS and DTR installations as told in the thread.
The other thread import into devlopment failed tells about the SAP note: 988010 iin which it is mentioned that this has been fixed in SP 11 for 7.00 version. We are already on SP 18. So it is assumable that this thing has already been fixed.
Can there be any other reason for this?
Thanks,
Sonali.

How to print only fatal error in log file in tomcat4.1

Hi all ,i m using tomcat4.1
1> i want to print only fatal error in log file ,but it print all thing in log file ,how i can avoid it(because i think this process is consuming my resource)
assume below ip address is corect:
this is exact printing in my log file
.12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/ir.jsp HTTP/1.1" 200 2828
12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /alerts/createAlertShow.jsp HTTP/1.1" 200 26140
123.2.3. - - [24/Oct/2007:00:00:05 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 642
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/latestRecommendation.jsp HTTP/1.1" 200 5210
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /portfolio/watchlist/displayWatchlistItemsShow.jsp?watchlistId=20070509013642953_1&watchlistName=First&refreshRate=900&flag=1 HTTP/1.1" 500 7257
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/iwealthNewsScroller.jsp HTTP/1.1" 200 2828
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:07 5050] "GET /menu/alerts.jsp HTTP/1.0" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "POST /Transaction/equity/modifyConfirmShow.jsp?DelId=0 HTTP/1.1" 200 28661
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 6422>what will happen if i change timestamp="false" and what is the significance of verbosity="1" or "2" or "3" ,or "4" and what happen if i change debug="1" or other in below code
<Logger className="org.apache.catalina.logger.FileLogger" debug="0" directory="logs" prefix="www.xyz_log." suffix=".txt" timestamp="true" verbosity="4"/>Edited by: Deepak23 on Oct 24, 2007 10:41 PM
Edited by: Deepak23 on Oct 24, 2007 11:16 PM

One of my standard answers (which will explain the use of Directory Objects)...
The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
The correct thing to do is to create a directory object e.g.:
CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
Then, grant permission to the users who require access e.g....
GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.

A fatal error has occured while updating your device's software

I have a problem I hope you guys can help me.
Blackberry Model: 8820
Device Software version: 4.5.0.55
Desktop Software version: 4.7.0.37
Carrier: Singapore Telecom Mobile Pte Ltd(https://www.blackberry.com/Downloads/browseSoftware.do)
Everytime I start up my desktop software, it would prompt me that there are newer versions for some of the applications in my blackberry such as my browser, brickbreaker etc. So I followed through their instructions to install these updates. When it reached step 3/11, an error would occur while it say it was trying to turn on my radio
Here's the screenshot of the error:
[URL=http://img199.imageshack.us/i/errortac.jpg/][IMG]http://img199.imageshack.us/img199/761/errortac.th.jpg[/IMG][/URL]
But I do observed that @ task 1/11, it switched off my radio. @ task 3/11 it tried to switch back on again. thats when the error occured.
when I unplugged my device after the error, I saw that my mobile connection was off and my blackberry had to re-connect again. I do admit that my area has pretty bad reception, but that cant be the problem right?
On top of that, maybe I also like to pop another 2 questions:
1) Why is it I cant set up my email? I followed the instructions here:
http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
but my setup wizard dont have the option to select "I want to create or add an email address"
I only gives me the option of the enterprise mail
2) I tried to browse to to te blackberry website using my blackberry, but its says my device is not supported. Any way to solve this?
Message Edited by howb21 on 07-09-2009 12:44 AM

does this help ?
http://www.blackberry.com/btsc/KB02696
Unable to complete loading operation. Fatal error occurred when updating handheld
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Fatal Error Acrobat failed to send a DDE command

Hello all. I have a fillable form I developed using word 2010. I am trying to convert it to a PDF form. I open acrobat and select star from wizard from the Forms menu. I browse to find the word document and open it. I save the PDF document and everything looks good. I get a progress bar that says "Please wait, reading Adobe PDF". This is very slow progress and then I get the Fatal Error message "Acrobat Failed to send a DDE command". I click ok and the progress bar continues still very slowly. I get the same message again. I click ok and the progress bar continues. The progress bar gets to the end and just stays there. Nothing happens. I waited for an hour and then cancelled it. When clicked cancel, the PDF document opens with my form but without any fillable fields or drop down menus. I tried to do it again a few times and I get the same error message. I am using Adobe Acrobat 9 pro version 9.4.2. Thank you in advance for your help.
Gonzalo

AA 9 will not work for anything but the print function from WORD 2010. The only version of Acrobat that is compatible with OFFICE 2010 for PDF Maker is AA X. Thus, open WORD and print to the Adobe PDF printer. Then open the pdf in Acrobat. Go to FORMS>Add or Edit fields. Since you have no fields at present, Acrobat will ask if you would like to detect form fields. Answer yes and you will get a first cut at the form fields. Yes, you will likely have to add some more and change the ones that Acrobat estimates, but you are on your way.
The other two options you have is to go back to WORD 2007 or earlier or upgrade to AA X (or find someone with AA X and WORD 2010). These methods are pretty much your options with the software combination that you have.

Fatal Error has occured and the application is being terminated

It seems that Captivate is eating my projects. I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files. It set me back at least a few hours worth of work. So I started creating backup files every 10mins, regardless of how much work i've done. Everything was going fine, until I took an hour break and went to resume my work.
When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files. Please restart Adobe Captivate."
I can click on the program workspace and not click ok on the error message to keep the file open. I see my slides and objects, but all the text is missing.
I'm using Captivate 5.5 and windows 7 64. Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images. I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue. That was before this last stint of errors.
I tried opening a backup that was like 10 saves ago, but it displays the same message.
I'm not sure what to do next.

Failed to back up the data. A fatal error has occured and the application is being terminated.
This question is Not Answered.(Mark as assumed answered)
hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

Failed to back up the data. A fatal error has occured and the application is being terminated.

hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

We have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
Yes, we were using a network drive but now we've switched to locally stored content.

A Fatal Error Has Occured - Captivate 6

Hi there, I have seen some threads on different error issues of Captivate, but mine is worse.
Since the Captivate 4 installed in my office PC, it never ran smooth. Our IT purchased version 6 for PC with hope to improve performance. But since day one, it has never worked.
First, it refused to boot, because the folder 'My Adobe Captivate Projects' was set to be installed in 'user's documents' folder, as by default. There wasn't much space in that folder because our company PC was set to limit the users' personal space, and I wasn't able to ask it to install in another folder (such as C drive, which would solve my problem). This folder wasn't installed at first. My Captivate opens then quits instantly. Our IT came and manually copied the 'My Adobe Captivate Projects\Layouts' folder from another computer which has it installed. Now I have one file named White.cptm in the folder named 'My Adobe Captivate Projects\Layouts\6_0\en_US'. That's the only Captivate file I have under Documents.
After adding the 'My Adobe Captivate Projects' folder, it can be opened. But as soon as I set to 'capture', it quits with fatal error message within 6 seconds into capturing. The temp folder, the export folder and cache all set to D drive (local drive). I can not open someone else's project files, I can not record, or any other operations.
Our IT came in again, we did a major clean up of all temp files, cache, etc... Still no luck, same fatal error. The message look like this (classical, like many users')
Could anyone tell me where has gone wrong? How can I ask Captivate to NOT READ FROM MY DOCUMENT FOLDER, instead I move everything to C drive (where rest of Captivate programme files are located)? Or there is a problem somewhere else?
I would be very greatful if someone can give a hint...!
OS: Windows 7 Enterprise. Intel Celeron 2.5GHz. Ram 8GB.

Thanks very much for your speedy answer! I tried hard to change it without any result, so I expected it could not be done...
Since I cleaned up my personal space just for Captivate, I will not store anything in my document, to make space. Now technically there is enough space to work with.
I have already set my preference settings to export/save/cache/whatsoever into D drive. It was the first tihng I attempted. I think the problem lays deeper though.
Now when I open the programe, it refuses to show me more than the welcome screen.
I can click 'blank project', then click on one of the default values, then OK. Nothing happens, I am back at welcome screen.
The only button actually can perform is the capture (software stimulation). If I start capture, it will show me fatal error instantly.
Everytime I open it, I would get stuck in one of the steps, today here, tomorrow there...I dont think I can have IT upgraded it very soon. So I try to solve this problem in the meantime... I will ask them to make it Admin for me, and see how it goes.
Do you know if there could be other things I could try?
Thanks a million.

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

X (Fatal Error)

Similar Messages

Maybe you are looking for