X-fi 2 microSD integration - no bookmark & annoying rebuilding

Bx-fi 2 microSD integration - no bookmark & annoying rebuilding, I am really disappointed by the x-fi 2 I just bought. The reason why I bought it is because I thought the microSD feature and its new integration by Creative will allow me to extend my library of music and audio books, because the internal memory (6Go) is just not enough for me.
Unfortunately, I found out too late that the microSD is just unusable :
- Rebuilding is performed when you access the microSD everytime the device is rebooted even if no content has been changed ! which is extremely annoying !
2 - But what makes it completely unusable for me is the fact that you cannot set bookmarks on the content on the microSD card !
I hope Creative will fix this in a new firmware soon, but I cannot wait forever until I search for another brand.

As I thought: The Clean up and formatting don't help. It does work for some hours (with some problems still occuring: random mode only plays the songs of one album, although there are several in the queue), but after having the player turned off for some hours, it shows the aforementioned problem: Screen turning black when klicking play.
Can I assume that my divice is deficti've?

Similar Messages

  • BW bookmark links to the portal.

    Hi,
       Can we integrate BW bookmark links in Enterprise Portal?
    If possible, I would like to know the steps required for integrating BW bookmark links in the Portal?
    Thanks
    Hari Krishnan K

    As I mentioned earlier to Ryan. See the link below. KM is only going to give you the Portal Favorites function which enables users to maintain their own bookmarks and personalize the links they wish to have. If you want greater flexibility and group distribution of the bookmarks click on my link below for additional info.
    Re: Leveraging BW Bookmarks

  • Accurate Bookmark File Sizes Needed Before Reinstall.

    I'm about to change Linux distribution and have around 20 thousand links (according to Library and Search). Most of those links are in category folders and sub folders and stuff gets routinely deleted when not needed, entire categories are often deleted when done with.
    If I backup the current bookmarks, the HTML file comes to 7.7 MiB and JSON file 7.3 MiB. How can I be sure those backup files actually contain my current 20k worth of links??
    It just seems a small file size for such a large amount of links. I'm sure I've seen larger backup file sizes than that in the past but it could be that things have changed under the hood and things have got more compressed.
    I can't really afford to discover that I've lost a load of links and folders when I come to set Firefox back up in a new distro (using import). It's bad enough Firefox ignores any current layout integrity when bookmarks get imported over into a new set up and I end up having to re-order everything over the following days. But I'm grateful that previous large (but smaller than this) backup bookmark files do usually end up whole.
    Thanks.

    Hi,
    One way you could check is to import the bookmarks backup into a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile], install [https://addons.mozilla.org/en-US/firefox/addon/sqlite-manager/ SQLite Manager] in both the profiles, and compare the count for any discrepancy: Firefox '''Tools''' ('''Alt''' + '''T''') > '''SQLite Manager''', ignore any prompts, select [http://kb.mozillazine.org/Places.sqlite places.sqlite] and '''Go''' in the middle of the toolbar. Next select '''moz_bookmarks''' on the left and click '''Search''' (button) on the right. For the Search, '''type''' = 1 and '''title''' IS NOT NULL would be a good criteria.
    [https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
    [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager]
    [http://kb.mozillazine.org/Profile_folder Firefox Profile Folder]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    To open the profile folder via Firefox: '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information''' > '''Show Folder'''.
    You can also install SQLite Manager on just a single profile and use '''Connect Database''' via the '''Database''' menu.

  • Minimized Cover Flow on Bookmarks page and now can't get it back

    On the Bookmarks page, I moved the Cover Flow section up so that it disappeared. When I tried to show it again by moving the cursor from the top to bottom of the area is originally displayed, the CF section fails to reappear. How to get it back?

    Good gracious. I was able to do that to myself in the course of seeing if I could replicate the problem.
    After some swearing and cursing, I managed to get the Cover Flow back showing again in Bookmarks by rebuilding my com.apple.Safari plist file, as per the instructions in the following user tip:
    http://discussions.apple.com/thread.jspa?threadID=2316559

  • How do you disable WEBPAGE PREVIEW IMAGES in Safari 4?

    Since I checked the 'show webpage preview images' immediately after upgrading, I've been losing hard drive space like there's no tomorrow. Every time I visited a few sites for the first time with Safari 4, I'd lose 10 MBs. After a few days I lost over 200 MBs and had enough of it. So I went to Reset Safari and noticed that now you could 'remove all webpage preview images' without resetting anything else. When I did this, I got all my space back.
    I don't see anyway to undo this feature. Top Sites and Cover Flow like integration with bookmarks are nice if you've got a big screen and hard drive.

    I know this thread is "answered", but I'll chime in.
    I locked the said folder, and it worked fine. However, this error was marked repeatedly, ad infinitum, in the console log, for every single page I visited:
    <Error>: CGImageDestinationCreate destination parameter is nil
    It was getting so out of hand, filling my console.log, I had to unlock the folder.
    Is there a way to lock the webpage preview cache folder, and not have Safari write to the log?
    Thanks

  • Scope of ATG in Social Networking

    Hi,
          1) I wanted to know if ATG framework can be used for commerce as well as social network based sites such as facebook.
          2) Whether ATG supports Tagging, uploading of images etc. for the logged in user as well as interacting with other users,adding them to their network etc...?
          3) Whether we can implement CLM(Crowd Layering Model) in the website using ATG where a registered user can categorize his contacts based on friends,family....etc.
    Any help would be appreciated.
    Thanks & Regards
    Rammohan

    1. Social integration e.g. likes, share, etc... are more of front-end integration
    2. But, as Shaik mentioned ATG provides support for social network
    Also, alternatively you can look @  http://developers.gigya.com/050_Partners/050_CMS_Modules/Gigya_Module_for_Oracle_ATG
    The module handles the integration with the core Oracle ATG engine. Visual aspects, including JSP, site navigation, and method of implementation are dependent on customer implementation of the website; however, this document offers a guideline and best practices recommended to deliver the best results.
    Also, you can build your own ATG module if need be for social networking integration & social bookmarking etc... This module can be reusable across web, mobile etc...

  • Crystal Report Server Database Log File Growth Out Of Control?

    We are hosting Crystal Report Server 11.5 on Microsoft SQL Server 2005 Enterprise.  Our Crystal Report Server SQL 2005 database file size = 6,272 KB, and the log file that goes with the database has a size = 23,839,552.
    I have been reviewing the Application Logs and this log file size is auto-increasing about 3-times a week.
    We backup the database each night, and run maintenance routines to Check Database Integrity, re-organize index, rebuild index, update statistics, and backup the database.
    Is it "Normal" to have such a large LOG file compared to the DATABASE file?
    Can you tell me if there is a recommended way to SHRINK the log file?
    Some Technical Documents suggest frist truncating the log, and the using the DBCC SHRINKFILE command:
    USE CRS
    GO
    --Truncate the log by changing the database recovery model to SIMPLE
    ALTER DATABASE CRS
    SET RECOVERY SIMPLE;
    --Shrink the truncated log file to 1 gigabyte
    DBCC SHRINKFILE (CRS_log, 1000);
    GO
    --Reset the database recovery model.
    ALTER DATABASE CRS
    SET RECOVERY FULL;
    GO
    Do you think this approach would help?
    Do you think this approach would cause any problems?

    my bad you didn't put the K on the 2nd number.
    Looking at my SQL server that's crazy big my logs are in the k's like 4-8.
    I think someone enabled some type of debugging on your SQL server, it's more of a Microsoft issue, as our product doesn't require it from looking at my SQL DB's
    Regards,
    Tim

  • What is the best practice in order to create flow in a single maintenance plan?

    Hi All,
    What is the best practice in order to create flow in a single maintenance plan.
    1st Check Database Integrity (Check DB)
    2nd Rebuild Index 
    or 
    1st Rebuild Index
    2nd Check Database Integrity (Check DB)
    Grateful to your time and support. Regards, Shiva

    Use the Maintenance Plan Wizard to create a maintenance plan:
    "This topic describes how to create a single server or multiserver maintenance plan using the Maintenance Plan Wizard in SQL Server 2012. The Maintenance Plan Wizard creates a maintenance plan that Microsoft SQL Server Agent can run on a regular
    basis. This allows you to perform various database administration tasks, including backups, database integrity checks, or database statistics updates, at specified intervals."
    LINK: http://technet.microsoft.com/en-us/library/ms191002.aspx
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Contacts Edit Label E7 N8 C7 S60^3

    EDIT LABEL feature in the Contacts Management fields ... *** VERY IMPORTANT *** We need this main feature. Remarks: from development side enable this is very simple. The Contacts database structure are ready. Its amatter add it in the menu and pop-up edit field window with saving. Nokia should return this feature back, if they remove it for integration issue, they should rebuild the integration structure and put the new standered, not to go back, e.g) iphone add this feature under user define fields type!! Hope Nokia will put it back sooner...
    MODERATOR'S NOTE: 
    We have edited your post. Please be advised that this forum is not for petitions or votations. You may however, contact Nokia Care via Contact us on your local Nokia website for your feedback.
    Kind regards
    Solved!
    Go to Solution.

    Hi,
    Being Nokia loyal, I am really feeling constraint with E7 without edit label feature.
    Also, the number of touches have gone up, while dialing a number from directory;
    Looks like, life has become more difficult and painful to keep using E7; while the new toy/device/instrument is lovely;
    Sudhir Aggarwal
    Moderator's note:
    We would like to inform you that we have removed your contact details from your post as it is unwise to publish it publicly on this forum.'
    Kind Regards.

  • @Klondike K7N2 Delta2 Platinum, new owner.

    Hi.
    I am kinda old but maybe not as old as you  . Experience before...   
    Much regard to your efforts for writing some exhaustive information on the MSI K7N2 Delta2 Platinum. I think I would be more than completely lost without your help http://www.nforcershq.com/forum/here-vp624299.html#624299. Now at least my system is running.
    I have some specific points, and please forgive me if I'm asking something you may have answered. Got kids running around, that kind of thing. Have to run out and pick up milk in a minute, life is busy, you get it... sure? Any links are helpful too.
    The existing server had an XP software raid (hack some dm* files a bit, there is a toms hardware article on it here http://www.tomshardware.com/reviews/windowsxp-make-raid-5-happen,925-2.html on a Shuttle AN35 Ultra 400 and a Barton Athlon XP 2600+ 0343.
    But it's a barebones board so I thought I would 'Upgrade' the file server with an 'everything' board. Enter the K7N2 Delta2 Platinum. Enter also a 0310 2500+ which I patched the mobile jumper for fun and cut all of L6. The NFORCE2 seems to ignore these settings, and swapping in the 2600+ completely stock doesn't seem to change anything below:
    Questions I have which I have not got answered yet (and running 1/20/2005 bios the board came with): I can't adjust the vCore! I can only set it in the bios but not in Windows, where I have 8rdavcore - this dynamically lowered my FSB and vcore when the system was idle. 8rdavcore lists the board but there is no driver in the drop-down: this is not the giveio.sys driver mentioned on the home page, it is a driver to interface with the vcore and other settings on the board.
    With your recommendations klondike the system at least boots reliably. Already I am disappointed in the MSI versus the Shuttle for this reason alone, no vcore and the settings seem really picky in the MSI Bios. The shuttle though had a periodic problem with crashes which I never figured out. LC 6420GP 80plus PS, ATI 9250 AGP, Team Value memory (identical in timing to the Value memory in your post Klondike), 3ware 9500S-8 hardware raid, NEC USB 5 port USB card and a 3com 10/100, all moved to the new system, with the 3ware newly introduced replacing the software raid. Removes the annoying rebuild when the system crashes out, prevents major disk data glitches.
    I want this system to dynamically underclock, but as yet, I cannot adjust the vcore down. For example, Corecenter, or nTune, has the field for vcore and other values, but except for FSB, they are locked, and 8rdavcore log shows it cannot load the driver. The Shuttle went to under 100 fsb with a low voltage dynamically, I think vcore 1.25 with the Athlon XP Barton 2600+, and run super-cool and use about 75 watts of power vs 110w.
    Any ideas?

     
    Came back to the machine, swapped back in the Athlon XP Barton 2600+, took a look in the BIOS (don't know if I changed anything, probably), and now the vCore is greyed out again in 8rdavcore. "No ATXP1 found."
    Edit: I used the CMOS jumper to reset settings several times to no effect. 
    Sorry I did not get the log when it was working. I will next time!  I assume where it says "not responding" has something to do with the problem.
    Here is the log from 8rdavcore:
    Code: [Select]
    00/24 16:36:50 | ===============================================
    00/24 16:36:50 | 8RDAVCORE: Version 8rdavcore 0.8.8-dev8
    00/24 16:36:50 | 8RDAVCORE: Windows NT/2000/XP detected
    00/24 16:36:50 | giveio: Opened Service-manager successfully
    00/24 16:36:50 | giveio: Service giveio exists
    00/24 16:36:50 | giveio: Service giveio is running
    00/24 16:36:50 | board: Found section General
    00/24 16:36:50 | board: Found section Abit KT7A
    00/24 16:36:50 | board: Found section Abit NF7
    00/24 16:36:50 | board: Found section Acorp NFU400N
    00/24 16:36:50 | board: Found section Aopen AK79D-400VN
    00/24 16:36:50 | board: Found section Asus A7N8X-E
    00/24 16:36:50 | board: Found section Asus A7N8X v2.0 Deluxe
    00/24 16:36:50 | board: Found section Chaintech CT-7NJL1/CT-7NJS
    00/24 16:36:50 | board: Found section DFI Infinity NFII Ultra
    00/24 16:36:50 | board: Found section DFI Lanparty NFII Ultra
    00/24 16:36:50 | board: Found section Epox EP-8RDA+ Rev. 1.x
    00/24 16:36:50 | board: Found section Epox EP-8RDA+ Rev. 2.x
    00/24 16:36:50 | board: Found section Epox EP-8RDA(3,6,+,I,E)
    00/24 16:36:50 | board: Found section Gigabyte GA-7N400 Pro
    00/24 16:36:50 | board: Found section Gigabyte GA-7NNXP
    00/24 16:36:50 | board: Found section Jetway N2PA
    00/24 16:36:50 | board: Found section Leadtek K7NCR-18D
    00/24 16:36:50 | board: Found section MSI K7N2 Delta L
    00/24 16:36:50 | board: Found section Shuttle AN35N Ultra V1.1
    00/24 16:36:50 | board: Found section Shuttle SN45G
    00/24 16:36:50 | board: Found section Soltek 75FRN(2)-L
    00/24 16:36:50 | board: Found section Soltek NV400-L64
    00/24 16:36:50 | SMI: Got IO base 0x4400
    00/24 16:36:50 | SMI: Back-to-back writes disabled.
    00/24 16:36:50 | smi: Function code not set, forcing to 0x88
    00/24 16:36:50 | SMI: Not responding.
    00/24 16:36:50 | 8RDAVCORE: Using board MSI K7N2 Delta L
    00/24 16:36:50 | nforce2_smbus: 1.1: 0x8410de
    00/24 16:36:50 | nforce2_smbus: Address of bus 0 is 0x5000
    00/24 16:36:50 | nforce2_smbus: Address of bus 1 is 0x5100
    00/24 16:36:50 | 8rdavcore: Init SMBUS drivers done
    00/24 16:36:50 | atxp1: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS0
    00/24 16:36:50 | atxp1: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS1
    00/24 16:36:51 | atxp1: No ATXP1 found
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | 8rdavcore: Init voltage drivers done
    00/24 16:36:51 | nforce2-pci: Revision c1
    00/24 16:36:51 | 8rdavcore: Init chipset drivers done
    00/24 16:36:51 | WINBOND: Found a W83627THF
    00/24 16:36:51 | ite: ITE8712F found
    00/24 16:36:51 | ITE: 16-bit fan counter 0x3c
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | SMI: Not responding.
    00/24 16:36:51 | lm90: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS0
    00/24 16:36:51 | lm90: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS1
    00/24 16:36:51 | lm90: No LM90 found
    00/24 16:36:51 | 8rdavcore: Init sensor drivers done
    00/24 16:36:51 | smart: Physical drive 0 opened
    00/24 16:36:51 | smart: SMART enabled on drive 0
    00/24 16:36:51 | smart: Physical drive 1 opened
    00/24 16:36:51 | smart: SMART_GET_VERSION failed
    00/24 16:36:51 | smart: Physical drive 2 opened
    00/24 16:36:51 | smart: SMART_GET_VERSION failed
    00/24 16:36:51 | smart: Physical drive 3 opened
    00/24 16:36:51 | smart: SMART_GET_VERSION failed
    00/24 16:36:51 | smart: IDE drive 0
    00/24 16:36:51 | smart:  Model:    ST3750640AS
    00/24 16:36:51 | smart:  Firmware: 3.AAE
    00/24 16:36:51 | smart:  Serial:               3QD14TMH
    00/24 16:36:51 | smart:  Buffer:   16777216 Byte
    00/24 16:36:51 | smart:  Available attributes (F=Pre-Failure, O=On-Line, P=Performance, E=Error-rate, C=Event-Count, S=Self-Preserving):
    00/24 16:36:51 | smart:   ID Name                           Value Worst Threshold Raw Flags
    00/24 16:36:51 | smart:     1 Raw Read Error Rate            117    91       6   158  FOPE 
    00/24 16:36:51 | smart:     3 Spin Up Time                    94    93       0     0  FO   
    00/24 16:36:51 | smart:     4 Start Stop Count               100   100      20   102   O  CS
    00/24 16:36:51 | smart:     5 Reallocated Sector Count       100   100      36     0  FO  CS
    00/24 16:36:51 | smart:     7 Seek Error Rate                 72    60      30   153  FOPE 
    00/24 16:36:51 | smart:     9 Power on time                  100   100       0   195   O  CS
    00/24 16:36:51 | smart:    10 Spin Retry Count               100   100      97     0  FO  C
    00/24 16:36:51 | smart:    12 Power Cycle Count              100   100      20   106   O  CS
    00/24 16:36:51 | smart:   187 Unknown                        100   100       0     0   O  CS
    00/24 16:36:51 | smart:   189 Unknown                        100   100       0     0   O ECS
    00/24 16:36:51 | smart:   190 Unknown                         63    54      45    37   O   S
    00/24 16:36:51 | smart:   194 Temperature                     37    46       0    37   O   S
    00/24 16:36:51 | smart:   195 Hardware ECC Recovered          81    61       0   207   O EC
    00/24 16:36:51 | smart:   197 Current Pending Sector         100   100       0     0   O  C
    00/24 16:36:51 | smart:   198 Offline Uncorrectable          100   100       0     0      C
    00/24 16:36:51 | smart:   199 UDMA CRC Error Count           200   200       0     3   OPECS
    00/24 16:36:51 | smart:   200 Write Error Count              100   253       0     0       
    00/24 16:36:51 | smart:   202 Unknown                        100   253       0     0   O  CS
    00/24 16:36:51 | 8rdavcore: Init SMART drivers done
    00/24 16:36:51 | pnp: Detected W83627THF
    00/24 16:36:51 | pnp: Registers are unlocked
    00/24 16:36:51 | pnp: GPIO config: 0x40, 0x40, 0x00, 0x00, 0x00
    00/24 16:36:51 | pnp: LD7: CR30=0x0f, 0xf0, 0xff, 0x0b, 0xff, 0xff, 0x00
    00/24 16:36:51 | pnp: LD8: CR30=0x01, 0xff, 0x5e, 0x00
    00/24 16:36:51 | pnp: LD9: CR30=0x00, 0xff, 0xff, 0xff
    00/24 16:36:51 | cpuload: thread created, id: 208, update: 5000
    00/24 16:36:51 | autofsb: autofsb_load(): Added AutoFSB1
    00/24 16:36:51 | autofsb: autofsb_load(): Added AutoFSB1.2
    00/24 16:36:51 | 8rdavcore: Chipset reported multiplier: 115
    00/24 16:36:52 | 8rdavcore: Calculated multiplier: 114
    00/24 16:36:52 | 8rdavcore: init_values done
    00/24 16:36:54 | 8rdavcore: Using driver
    00/24 16:36:54 | control: control_set_val(): POSSIBLE BUG: Got a NULL pointer
    00/24 16:36:54 | 8rdavcore: Init control startup values done
    00/24 16:36:54 | 8rdavcore: Create sensor list done
    00/24 16:36:54 | 8rdavcore: Create preset list done
    00/24 16:36:54 | 8rdavcore: Create AutoFSB list done
    00/24 16:36:54 | 8rdavcore: Create trigger list done
    00/24 16:36:54 | 8rdavcore: Create sensor field done
    00/24 16:36:54 | 8rdavcore: No primary VCore control!
    00/24 16:36:54 | 8rdavcore: Create voltage list done
    00/24 16:36:55 | 8rdavcore: Create SMART list done
    00/24 16:36:55 | 8rdavcore: AutoFSB disabled
    00/24 16:36:59 | control: control_get_val(): POSSIBLE BUG: Got a NULL pointer
    00/24 16:36:59 | 8rdavcore: Saved Main vars
    00/24 16:36:59 | 8rdavcore: Saved sensor settings
    00/24 16:37:00 | 8rdavcore: Saved presets
    00/24 16:37:00 | 8rdavcore: Saved autofsb settings
    00/24 16:37:01 | 8rdavcore: Saved log settings
    00/24 16:37:01 | 8rdavcore: Freeing lists...
    00/24 16:37:01 | Done.

  • When i use firefox 7 and click on the bookmark menu, it leaves an annoying image of the bookmark window on my desktop that I can't get rid of.

    When I click bookmarks in the Menu Bar, it leaves an image or "print" of the bookmark window on my desktop. It does not go away after exiting Firefox. The only way I can remove this image from my desktop is to restart my computer. It is becoming a bit annoying. I should mention that this problem does not occur when using the bookmarks icon in the Navigation Bar which I never use because I prefer the other. This has been happening in Firefox 4 to 7, but never in earlier versions.

    There is probably a glitch in Firefox's graphics hardware acceleration feature, which was introduced in Firefox 4. To turn that feature off:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the General mini-tab, uncheck the box for "Use hardware acceleration when available"
    This change should take effect after you restart Firefox.
    If you miss (or think you will miss) the hardware acceleration feature, you could try updating the drivers for your graphics card to see whether that solves the glitch.

  • When trying to save a bookmark to a specific pre-established folder the window disappears and will not allow me to make a selection. If I hover in the area it will flash on the screen and disappear again, it's annoying please help!

    When I attempt to save a new bookmark and want to save it in a folder the window that typically appears just below the address bar will not stay on the screen. It flashes on the screen and as soon as I move my cursor over it, it disappears. It will not allow me to make a selection of any kind. If I randomly hover over the general area the window will flash back in view but disappear again just as quickly. If I then show all my bookmarks, the bookmark was saved and I have to move it to the folder I actually want it in. Just a few extra steps, but still very annoying. Please help!

    DID YOU FIND A SOLUTION???I HAVE TH ASAME THING AS WELL

  • The system doesn't recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of

    The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?

    You hit the target CT.
    It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
    I hope to make some sense here.

  • Change bookmark/text in footer (OLE-integration)

    Hi folks
    I have a ABAP program with OLE integration to Word (Old program, and therefore the old way to integrate - not DOI!) So far so good. It has been working for the last 4 years. Now I want to add some extra code, so I can insert a value to a bookmark in the footer. Alternative is to change a word in the footer. I have been fighting with the code for a quite a long time.
    My problem is to convert the shown macro to ABAP Method/Property coding!!
    The cursor is placed in the top of the document. In the footer I have a text: &Z_FOOT2&. This text I want to change with anoter value. No problem when I just activates the function Change All (recorded in the macro) - but how to do in ABAP???
    Hope You can help me!!
    REPORT ztces_word_test
           NO STANDARD PAGE HEADING
           LINE-SIZE 255
           MESSAGE-ID zcrm00.
    * OLE - Word Integration
    INCLUDE ole2incl.
    DATA o_word             TYPE ole2_object.
    DATA o_docs             TYPE ole2_object.
    DATA o_doc              TYPE ole2_object.
    DATA o_selection        TYPE ole2_object.
    DATA o_range            TYPE ole2_object.
    DATA: o_find            TYPE ole2_object.
    DATA skabelon(255)    TYPE c.
    CONSTANTS: tab(2) TYPE x VALUE '0D0A',
               wdtoggle TYPE i VALUE 9999998,
               c_true  TYPE i VALUE -1,
               c_false TYPE i VALUE 0.
    CONSTANTS: true VALUE 1, false VALUE 0.
    CONSTANTS:
       c_wdstory     TYPE i VALUE 6,
       c_wdextend    TYPE i VALUE 1.
    skabelon = 'C:SAPWORKDIRCRM Kundeplanfooter_change.dot'.
    CREATE OBJECT o_word 'Word.Application'.
    SET PROPERTY OF o_word 'Visible' = '1'.
    CALL METHOD OF o_word 'Documents' = o_docs.
    CALL METHOD OF o_docs 'Add' = o_doc
      EXPORTING
      #1 = skabelon.
    IF o_doc IS INITIAL.
      CALL METHOD OF o_word 'Quit'
        EXPORTING
        #1 = 0
        #2 = 1
        #3 = -1.
      COMMIT WORK.
      MESSAGE e001(ztces00) WITH skabelon 'IIE'
             RAISING skabelon_findes_ikke.
      FREE OBJECT o_doc.
      FREE OBJECT o_docs.
      FREE OBJECT o_word.
    ENDIF.
    CALL METHOD OF o_word 'Selection' = o_selection.
    * Here I have the MACRO which I recorded in the Word Document
    *    Selection.Find.ClearFormatting
    *    Selection.Find.Replacement.ClearFormatting
    *    With Selection.Find
    *        .Text = "&Z_FOOT2&"
    *        .Replacement.Text = "New footer text"
    *        .Forward = True
    *        .Wrap = wdFindContinue
    *        .Format = False
    *        .MatchCase = False
    *        .MatchWholeWord = False
    *        .MatchWildcards = False
    *        .MatchSoundsLike = False
    *        .MatchAllWordForms = False
    *    End With
    *    Selection.Find.Execute Replace:=wdReplaceAll
    *GET PROPERTY OF o_selection 'Find' = o_find.
    CALL METHOD OF o_selection 'Find' = o_find
      EXPORTING
      #01 = 'Z_FOOT2'.
    * Selection.FIND.ClearFormatting
    * Selection.FIND.Replacement.ClearFormatting
    *GET PROPERTY OF o_selection 'Find' = o_find.
    *CALL METHOD OF o_selection 'Find' = o_find.
    *CALL METHOD OF o_find 'Replacement' = o_find.
    *CALL METHOD OF o_find 'ClearFormatting' = o_find.
    CALL METHOD OF o_find 'Execute'
    *CALL METHOD OF o_selection 'Execute'
      EXPORTING
      #01 = '&Z_FOOT2&'
      #02 = true
      #03 = true
      #04 = false
      #05 = false
      #06 = false
      #07 = false
      #08 = false
      #09 = false
      #10 = 'New footer text'.
    CALL METHOD OF o_selection 'HomeKey' = o_range
      EXPORTING
      #1 = c_wdstory.
    FREE OBJECT o_word.
    Best regards
    Carsten :o)

    Hi,
    Go to Tocde: So10
    Give  as follows:
    Text Name       :ZXX_ZXXXXX_FOOTER
    Text ID              ST
    Language             EN
    and enter change mode, change whatever modifications you want.
    after run Standard program: RSTXTRAN  for adding Standradt text to transport request
    Regards
    Jana

  • [partially fixed] Firefox3.6 annoying sound when I click a bookmark.

    The annoying sound started happening with the 3.6 update. It happens when I click any bookmark, or menu item. How do I turn this off? I've checked out about:config and set
    accessibility.typeaheadfind.enablesound
    liberator.saved.accessibility.typeaheadfind.enablesound
    both to false.
    Any help would be appreciated
    Last edited by tomd123 (2010-01-31 23:35:32)

    egan wrote:
    I guess I will hold out on upgrading until I see this resolved. This is exactly the kind of thing that I want to avoid with Arch. Having unwanted sounds is especially bad when you don't run a sound server and therefore can only have one sound-making program at a time.
    BTW, does adding:
    gtk-event-enable-sounds=0
    to ~/.gtkrc kill the sounds? This will disable GTK sounds globally though (which may be wanted ). Firefox really shouldn't make sounds by default though!
    Editing ~/.gtkrc-2.0
    and adding the following line to it:
    gtk-enable-event-sounds=0
    and then restarting ff3.6 DOES turn the sound off, but it will turn off sound for ALL gtk apps.

Maybe you are looking for