X-Fi 7.1 "Home Theater Cable": Where to buy?

Hello.
I am looking very desperately for a 7.1 "Home Theater Cable" for the X-Fi:
CReative Labs 7.1 "Home Theater Cable"
Where can I find it's
Do you know buying sources?
Thanks,
Tobias Claren

Tobias,
Despite the CL Store's accessories page still having a picture of that cable:
http://us.creative.com/products/welc...asp?category=3
it looks like they've stopped making/selling it. It's always been sort of a speciality item. However, you can substitute 3 common AV cables. You need one stereo minijack to dual RCA and two Sony-type camcorder AV cables. I'm not recommending Parts Express, per. se., but I find them useful for illustrating simple, basic cables of this type. It shouldn't be that hard to locate equivalent cables locally, though they can get pretty fancy and expensi've if that's your bent. If I had easily found the camcorder ones without gold contacts, I'd show that.
So, that said, you need one of this sort:
http://www.parts-express.com/pe/show...tnumber=240-35
for the sub/center jack. If I recall correctly, the red connector is the sub and the other the center.
And two of this sort:
http://www.parts-express.com/pe/show...tnumber=240-42
for the front and rear jacks. Again IIRC, for the front jack, white is left, red is right, and yellow is rear left. For the rear jack, white is side left, red is side right, and yellow is rear right. If I don't recall correctly, you should be able to figure it out using the channel test.
I beleve this scheme applies to the PCI 7. cards and the PCIe 7. ones use 4 stereo jacks instead (in that case you need 4 of the first type of cable).
-Dave
[email protected]

Similar Messages

  • SB Home Theater Cable vs. Audigy 2 Platinum Ex incompatib

    Hi all,?I need to connect my good ol' Audigy 2 Platinum Ex to a 6. speaker setup. I noticed that Creative has the Home Theater Cable, but the cable seems to be for a 7.-able sound card, not a 6. (see link)http://www.creative.com/products/pro...duct=4309&nav=. Is this true that the cables we can buy from Creative are only for the newer 7. cards? If so, where could I get/what kind of cables will I need for the Audigy 2 Platinum Ex to a 6. speaker setup?Thanks!Message Edited by bizsar on 07-09-20072:56 PM

    leif99 wrote:
    I tried to paste the picture on the front page of this manual. Here you can see that the card does in fact not have the connection you circeled red. I have also seen the sketch with this aux connection. The drawing is wrong. The card does not have the aux 4 pin connection. It seems like this type of card has been supplied as a "clean" version with no aux input, and a version as you describe. The manual following my card includes a sketch where the aux is not shown. I am quite puzzeled. Is there any other way of solving this? I am reluctant to by a new sound card.
    If there are no 4-pin input connectors onboard, then you need to use one of the line-ins on I/O Console. You mentioned that the sound becomes distorted when connected through line-in (which one have you tried?)
    --> can you control the output level from VCR ?
    --> have you tried to set input level in Surround Mixer (Wave and Line-In sliders, .rec (AnalogMix(), Line-In n when recording))?
    --> have you tried usie Line-in 3 (Aux-In, back of the I/O Console) or Line-In 2 instead of Line-In which is a 'FlexiJack' type jack connector (holds both, mic-in/line-in sources)?
    jutapaMessage Edited by jutapa on 08-2-2006 0:22 AM

  • Getting 5.1 from Fatal1ty with "Home Theater Cable"

    I have the "Home Theater Cable" but my reciever "Denon 205" only have 5.1 EXT.in so the "side left and the side right aren't pluged. When i test the different speakers, i hear sound from "center, FR, RR, FL and SW. But I dont hear anything from RL?Can anyone tell me why?

    Worked fine.Given all the problems I've been reading about<i can't believe how easy it was. Set up was breeze!
    Thanks

  • Home Theater Cabling Setup

    Very soon, I will be migrating to a 64-bit install of Vista--and my computer audio will be coming from a Harman Kardon receiver in a 5. setup. This will be wired from an X-Fi XtremeGamer. How can I configure this to cause the fewest possible problems? Should I use optical out, or the sound blaster home theater cable? Can anyone comment on the reliability on surround sound output of their X-Fis?

    If you want to take advantage of any of the Creative multichannel features then spdif is a no go (cmss/EAX). It will only pass through DTS/DD from source, and all other media will be stereo only. You will need to use the analogue outputs which as you can imagine will be some considerable bulk if you're going to use decent quality pairs (4 pairs for 7.) and finding 3.5 to RCA in lengths over .5m will be a chore unless you opt for cheapo 5m. My advice would be to forget Creative an opt for a manufacturer with a better support track record, better driver support track record, and a card with Dolby Digital Live via digital.
    Message Edited by OG on 03-24-2008 07:56 PM

  • ATV with home theater cable question

    Just bought the ATV, I have HDMI on the TV but not the home theater (Harman Kardon AVR7300 ) but it does have Optical audio jacks.
    My plan was HDMI from ATV to TV & Optical audio from ATV to Home Theater.
    Does this sound complete & correct ?

    Worked fine.Given all the problems I've been reading about<i can't believe how easy it was. Set up was breeze!
    Thanks

  • HOW LONG IS THE HOME THEATER CABLE BY CREATIVE FOR 14

    I want to know the length of the cable for my home theatre by creative for sound blaster for 4.99.
    Its on backorder so i have to assume that someone here has it and knows!!!
    Thanx
    FTNON

    What a good read. The Apple iPhone warranty is freely available in the public domain. Whatever it says.

  • Creative Zen Vision data cable: where to buy o

    I lost my Zen:Vision data exchange USB cable a few months ago, i have since bought 2 more from amazon which only work for charging uses. Their description stated they could be used to exchange data, but they don't seem to work with my PC.
    Does anyone know where i can buy a replacement (official) USB cable?

    Hi,
    If you have not already, it's best to get in touch with Customer Support in your respecti've region so that they can advise on the availability of the cable.

  • Samsung wireless blue ray home theater

    i just got a samsung home theater HT - C5500 and I want to know what do I need to use the internet, wireless speakers, and all the features; also I need to know if I can plug my phone to the bluey ray player... its a htc phone

    Ok, first of all, in order to use the internet features of the blu ray player, you can go about this two different ways. You can either directly plug an ethernet cable into the back of the blu ray player/home system and access the internet that way, or you can go and purchase the Wireless adapter stick. This stick looks very much like a flash drive that you plug into the back of the player and it picks up on your home wireless signal.
    Secondly, in terms of making your speakers wireless there are a couple different options you go with. Samsung sells a device that can make your rear speakers "virtually wireless". What this means is instead of running speaker wire from the home system/blu ray player at the front of your room all the way to the rear of your room, there is a small box that will sit in the back of the room and you run the rear speakers speaker wire into the box. The box then communicates with the home system/blu ray in the front of your room, and you have now saved a lot of wire from being run all around your room. This is the most simple way, but the box is not sold in stores, you will need to order this box directly through Samsung.
    The other option in terms of making your speakers wireless is the Rocketfish rocketboost setup. There are many different ways you can go about setting up your speakers so they're wireless and these kits vary depending on how you'd like things done. I'd suggest going and speaking with a Home Theater specialist at Best Buy about this option, they could actually give you demonstrations and a better visual explanation than what I can here.
    Finally as for hooking up your HTC phone to the system, there are cables to do so, you just need to purchase the one specific to your model phone. For example, if you'd like to listen to music off your phone, you can purchase a cable that is a headphone jack on one end and a red and white stereo cable on the other end. This way, the headphone jack plugs into your phone and the red and white into the tv or surround sound system if it has the inputs for it (which i dont believe it does). In terms of transmitting video, you will need a specific cable, which I would then again speak to either a Best Buy Mobile associate and/or Home Theater specialist, the combination of the two will be able to point out exactly what kind of cable you will need (I have an iphone and I have it hooked up to my system to watch shows on).
    I hope this helped you out and that you can get everything all set now in terms of your new surround sound system!
    Ohh and I am a Home Theater specialist for Best Buy if you were wondering and I'm very confident in what I have explained here, hope it helps you out =D

  • Sound Blaster Home Theater Cab

    I saw this Sound Blaster Home Theater Cable
    on the site and was wondering does any one know when it will be released in the US it seems to already be availabe in the UK web store but not here.Message Edited by protogenxl on -28-2005 06:46 AM

    I also want to buy the HT cable for my Sony STR-DE898, too, but from CompUSA since I have a CompUSA Gift Card.
    Edit: I didn't notice the thread posted date (which is located below member's information) but I've posted it anyway...a month old.Message Edited by GraysonPeddie on 2-30-2005 :43 PM

  • Question about connect X-Fi Xtreme Music with 5.1 Home Theater (analog inp

    I want to connect my X-Fi to new speaker. (exact model : EACAN A200 5.)
    but it has only 6 analog input ( center,sub,front l/r,rear l/r )
    if i connect it with Creative Home Theater Cable
    ( http://asia.creative.com/products/product.asp?category=3&subcategory=55&product=4309 &nav=0 )
    will it work perfectly? because i think this cable made for 7. speaker, will i miss sound that came from side l/r channels ?
    If i can't use this cable, How can i connect X-fi to a new speaker?
    Message Edited by chunbogbog on 04-09-2008 06:0 AM

    since u are using 5. speaker, you only need to directly connect the cable from ur speaker to the sound card output, no need to use Creative Home Theater Cable.
    and remember to set your sound card to 5. no matter u use what cable, since ur speaker is 5. only...if u play 7. content movie, the side L/R will directly map to the rear speaker, so no "miss sound" issue...understand?

  • Building a Home Theater, Suggestion​s?

    So I am looking to build my first really home theater and I am really looking for a good system, but do to some restriction by my girlfriend I am looking for a compact size system.  I have done some research and am stuck between the Mirage Nanosat System and Sub or the Boston Acoustic Soundware XS (which unfortunately BBY does not sell the Soundware XS).  I also have no idea what receivers would be recommended for either of these, from what I had read the Boston Acoustic pair great with Denon so I was checking out the Denon 1611.  I also had my eyes on the Yamaha A700.
    I hope you awesome people out there can give me some suggestion or point me in the right direction.
    Thanks!

    Definitive Technology ProCinema 600 5.1-Channel Home Theater Speaker System with Powered Subwoofer
    Model: PC600 | SKU: 8206201
    Learn more about Magnolia Premium Installation   Enjoy lush layers of crisp audio with this speaker system that harnesses advanced audio technologies, including sonically matched speakers and Balanced Double Surround System high-definition drivers to create an intense listening experience.
     4.8 Read reviews (24)
    Sale: $799.98
    Without having personal experience with that Boston Acoutic set, I cannot give an opinion based upon that. However, the Mirage nanosat set is great, 5.0 system for about $600 is a good deal, especially since the speakers are omni-directional. Omni-directional is great for more open rooms, as the speakers distribute the sound 360 degress rather than in a forward arc. Even turning the speakers backwards they still sound the same.
    Another option is the Definitive Technology PC600 5.1 System. A great full 5.1 system for $800 using small compact speakers with a full range of sound. Each speaker has a tweeter, a mid-range, as well as a small woofer giving you a full sound from each speaker. I would recommend heading into your local Best Buy with a Magnolia demo room to hear the Mirage Speakers as well as the PC600 set.
    For either system the Denon 1611, or 1911 would be perfect.
    The mirage set will be close to $1,500 or so, the Definitive set will put you about $1,300.
    Hope that helps out a little bit, however I'm sure mustang will have some other great options.
    Although I am a Home Theater Employee at Best Buy, all comments posted by myself are entirely personal opinions based upon my personal experiences both in store and at home. My opinions are my own, and are not those of Best Buy Stores, Geek Squad or any other Best Buy Brands.

  • NEED HELP --- hooking up tv, cable box, home theater

    60" Samsung smart TV --- contains several HDMI inputs
    Time Warner HD cable box --- contains 1 HMDI input; components as well
    LG Home Theater in a box, Model #BH6820SW --- contains 1 HDMI output, red/white aux input, & yellow video output.
    Very simple...... I want to turn my TV on, change channels with cable box remote & have my sound from TV come out of this home theater in a box I just bought.
    I've been at this for hours and I'm ready to take it back because of the ongoing frustration. I have 3 HDMI cables to use (which obviously I won't need all of them), I have a red/white audio cables and a yellow video cable to use if needed.
    Can someone out there PLEASE explain how this can be done?????????
    Thanks.

    You may be able to do it by running a Digital Optical cable to the Digital optical input on the LG from the TW Cable Box, and a seperate HDMI cable to the TV from the TW Cable box.
    Honestly though, I'd take it back and get a an AVR with HDMI switching, a set of speakers, and a standalone Blu Ray player. It'll cost more, but you'll get a better feature set, better performance, and more flexbilty to add more devices down the road.

  • My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

    My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

    Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
    Example
    http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1

  • Connecting HDTV/Dig Cable/Wii/Home Theater Receiver

    I have a Samsung 600series HDTV, Yamaha Home Theater Receiver, AT&T Uverse Digital cable box and Nintendo Wii. What is the best way using HDMI and an optical audio cable(s) to route everything through my Receiver? I want to minimize the amount of cables running behind the wall up to my TV.
    Right now I have:
    - HDMI from Digital cable box up to HDTV
    - HDMI from Receiver to HDTV
    - Optical audio from HDTV to Receiver
    - Wii not currently set up b/c I when connected to the Receiver I couldn't find the proper setting to get this to work
    In the current set up, I get full audio out of all 5.1 surround sound speakers with the radio, but when the TV/Cable is on I only get sound from the front L & R. I'm sure it has something to with with my set up because I know all 5 speakers work...
    thanks for your help,
    Solved!
    Go to Solution.

    We use the second set up. Works just fine for us. Routes everything neatly to the receiver with one easy to conceal hdmi cable to the t.v.
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • Received apple tv as gift, my tv/home theater situation has no HDMI input capabilities.  My only option is an optical connection, please give me some inexpensive optical cable suggestions???

    Received apple tv as gift, my tv/home theater situation has no HDMI input capabilities.  My only option is an optical connection, please give me some inexpensive optical cable suggestions???

    Welcome to the Apple Community.
    HDMI is required to connect the Apple TV to a TV or through a receiver. The optical connection is for audio only.

Maybe you are looking for

  • Enable/Disable Column in a Advanced Bean Table

    Hi, I have 2 columns that needs to be enabled/disabled on a standard oa page PO Lines summary page. I went through couple of blogs/forums and found 2 approaches :- Approach 1 1) Extended the standard VO POLinesMerge. 2) Added a attribute column Deriv

  • Getting values from dynamic items

    I've created some items on my page using APEX_ITEM. This is a really cool feature, it allows extreme flexibility. My problem is, I can not get the value out of the textbox I've created. It doesn't appear in session state at all. I thought this wasn't

  • How to upload the RM and PM budjeted cost in sap.

    Dear sap guru's,              Could you please suggest me , how to upload the 2008 budjeted cost(RM/PM)  in sap, One way i can upload the budjet Through  materi master( costing2 tab) ie planed price1 or 2 , Please suggest me is there any other way to

  • Hook up a projector

    How do I hook up a projector using HDMI? I tried to hook up my Optoma projector, but it doesn't recognize the Macbook

  • Urgent help needed : Error while creating r-tree index

    Hi All: When i try to create an rtree index on a multipolygon layer am getting the following error . Am using the following statement: CREATE INDEX SYSTEM.TEST_IDX ON SYSTEM.TEST("GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('SDO_INDX_DIMS=