X-Fi audio cleanup not available

I just bought a new computer, running XP Pro 32 bit on an Asus P5Q mb, and I added a PCI X-Fi soundcard from my old computer. I disabled the onboard Realtek sound card in the bios, and it does not show up anywhere in device manager. I installed all the latest drivers and software, but when I try to turn on the audio cleanup feature in Media Source player, I get this message: "This feature not available because no supported audio device is detected." Everthing else works fine, except that the THX customization button in Console Manager is also missing. I am running SX Fidelity as well, but I've used it before with no problem, and I can toggle it on and off. I tried going back to older drivers with no difference. Is there is some kind of a fix or workaround for this problem? I am a bit of a fanatic for sound quality and I would like that little extra efor listening to mp3s.

cipriansk7 wrote:
Thank you my friend,I have done as you have mentioned (made sure the DLL did not stay there when I rebooted before I installed your version), and now I have the version which you have built. However, I am still unable to hear the subwoofer I am so sad... even my default on-board card supports the 5. just great, and I love the sound of that, but I was hoping for something better from Creative - instead, all I got was a soundcard I can only use with my headphones at the moment because of a faulty driver...
Did you enable Bass Redirection?
Run Console Launcher, click on Speakers and Headphone -> choose 5. Speakers.
Then click on Bass (Bass Management) and enable Bass Redirection.

Similar Messages

  • Synchronize from audio option not available in 'Create mutli-camera source sequence' command?

    I watched Jason Levine demonstrate the 'create multi-camera source sequence' feature that allowed you to sync multi-camera clips automatically by clicking on an 'audio' option:(http://tv.adobe.com/watch/creative-cloud-for-video/dslr-editing-workflow-in-adobe-premiere -pro-cc-part-3-multicamera-dslr-workflow-with-automatic-audio-sync/)
    I loaded in three clips from three different cameras of the same shoot, and when I follow those instructions and select the above command, it doesn't present the dialogue to select the synchronize from audio feature:
    Am I doing something wrong? All three clips have audio...can't figure out why this feature isn't working for me??Is this not available in the Premiere Pro version we have available for download? I'm just in the process of upgrading to 6.02 now to see if thats the case...

    This will only be available in Premiere Pro CC due out June 17th.

  • Purchased Audio Book not available anymore

    Hello, I'm using a Mac to sync my phone and Ipad. After upgrading to iOS5 I am no longer able to access my Audiobook that was purchase. I Tried to redownload the book, but it's recharging me for something That I've already purchased. How can I get this book again?

    No one on these boards would have that information as we are simply fellow users like you. The availability of any content is strictly up to the copyright & other license holders for content, not Apple. You can use the following link to submit your request. Even though it says music, you should be ok.
    http://www.apple.com/feedback/itunes.html

  • Audio Capture not available / grayed out

    I have a Samsung SC-D263 connected and when I try to capture video in FCE there is no audio. When looking in the settings, the check box for audio capture is grayed out... any ideas?
    I managed to find drivers for the camera, but i don't know how to install them...

    What audio checkbox are you talking about?
    Do you see the video in the capture window? Do the meters move?
    http://www.fcpbook.com/Audio3.html

  • Most originally english language movie rentals in the Spain iTunes store are dubbed in Spanish and dual audio is not available! ¿Who can I contact to have this problem looked at

    I've really cut back on my movie rentals in iTunes because of the lack of language options. It's so frustrating, especially considering that it's something that should be so easy to do!

    You can comment to Apple via their feedback page, if you wish:
    http://www.apple.com/feedback/itunesapp.html
    Regards.

  • On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

    On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
    When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

    I tried to update and it keeps telling me to get the Application Manager. And this is what happens
    Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
    Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
    I followed the instructions it gave me to correct this issue:
    If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
    #Restart the computer and try the installation again.
    #If the installation fails, delete the InProgress registry key: 
    Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft. 
    Launch Windows Registry Editor.
    (Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
    (Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
    Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
    Delete the InProgress key.
    I was not able to find the "InProgress" key.

  • Error message: "the previously selected audio interface is not available"

    HELP?!?!?!?!?
    I'm stuck, and I can't go forward. Here's my issue:
    I've bought a Focusrite Saffire LE, a simple firewire audio interface, for use with my Logic Express 7 (with all the latest updates). I run the setup assistant and select my saffire as the audio interface to use, and then when logic runs I get the message "the previously selected audio interface is not available" and it defaults to my Macbook Pro's internal microphone and speakers.
    Just for sanity I've tested the audio interface with garageband and it's fine. My other audio apps aso run fine using the saffire as the audio interface. The setup assistant for logic has no problem finding the saffire, so why does it get rejected as soon as logic starts?!?!?
    Please - this is driving me crazy.

    I asked Focusrite for some help, and they said it should work (which I knew) and made some suggestions. Here's their email:
    "Saffire LE should work fine in Logic Express.
    Try resetting your logic preferences. Go to Logic > preferences > initialise all except key commands.
    Do you still have the same problem?
    Do you have any other firewire devices attached?
    Have you had any other interfaces installed in the past?"
    All good suggestions, but so far no luck.
    Has someone else got the same config as me? (15" Macbook Pro and focusrite saffire le)?

  • I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

    I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

    I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
    My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As".  So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail.  I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, and then try again."
    Here's what I know:
    The server -- Peter's iMac (8) does exist;
    The server -- Peter's iMac (8) is available at this time;
    The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
    The server IP address is correct, as specified in the system sharing preferences;
    The network connection is active when I attempt to connect.
    I'm convinced the problems stem directly from the OS X Yosemite update.  None of this was ever remotely an issue in the previous OS X's -- any of them.  This is maddening!  What can be done?  Apple?? Anyone???

  • Pane with audio meters and SFX library not available

    All my panes are showing up in every layout except for the pane with the SFX library and audio meters. I properly removed/re-installed FCS, and the pane is still not available. Any suggestions on how to fix this problem would be greatly appreciated.
    Thanks
    Isaiah Smith

    I can't find it, but try trashing the STP preferences. I assume you've already gone through the menu to try to turn it on.
    Go here for information for trashing preferences.
    http://www.digitalrebellion.com/blog/posts/howto_trashpreferences.html

  • Audio symbol from right hand bottom has disappeared, Volume control is not available.

    I have HP compaq presario f 739 au, laptop running on windows XP. One fine morning I found audio missing, the symbol (a) for audio was not there,even volume control ( Realtek AC 97 ) could not be opened.
    I tried few things like reloading UAA bus driver,(sp 33867) AND CONNEXANT SP 35258, ETC But I got messages like-Could not find media device for the driver" or There are no active mixer devices available. and am stuck without audio.
    All other system functions are ok ,this sudden dis appearance of audio has put limits on use.
    Any suggestions?
    Anand 

    This forum is for suite specific questions only. Yours appears to be application specific and if I was sure which one I would move this there.
    There are several video apps so please post this in the appropriate one where the experts are far more likely to see it.
    Bob

  • Audio Normalizing for 2/many clips - not avail?

    iM09 Help tells ..
    *To normalize clip volumes:*
    Select the clips you want to normalize, and then double-click one of the selected clips to open the inspector.
    Click Audio, click Normalize Clip Volume, and then press the Return key.
    unfortunately, after selecting ≥2 clips, this function is in the Inspector panel not avail ('grey'). for a single clip it works ..
    am I missing something.. ?

    so, it is not only me (stupid) ..
    Uploaded with plasq's Skitch!
    there's no 'feature ON' switch, the Advanced Tools are on, but the Help file says, both in English or German, it is allowed to select more than one clip and 'normalize' all selected clips ..
    hmmm..
    guess, I've to write some 'bug' report ..

  • Not available for FaceTime audio-why?

    If I try to make a FaceTime audio called to a friend I get a not available for FaceTime audio error message.
    If he tries to call me he gets the same message.
    We both can make ordinary video FaceTime calls to each other though.
    We are both using the iPhone 5 with iOS 7.02.
    Any idea what the problem might be?
    Also, does anyone know a Siri command for initiating a FaceTime audio call? Saying "FaceTime Doug" will initiate an ordinary FaceTime call. But what about an audio FaceTime call? My friend is blind, so if there is a Siri command I would like to tell him.
    Thanks,
    Doug

    I had the same problem, after seeing the comment about 7.0.4, I went to Setting to check my version, it was 7.0.4.
    Then I tried again using Facetime Audio and it worked fine this time !!!
    Probably it needed reminding that it is already upgraded
    Sam

  • M Audio firewire solo with yosemite - 'The previously selected audio interface is not available'.

    Hi, I recently bought a new mac mini with yosemite OS. I plugged in my M-audio firewire solo and (after a bit of trouble) finally managed to see it appear in GB. then moments later a dialogue box appears with 'The previously selected audio interface is not available'.
    There doesn't appear to be any update drivers from M-Audio and the CD that came with the interface also does not work?
    I can't find any information with this problem. Can any one help?

    Oops. . . A loose lead connection may have been the problem, although still not receiving a signal?

  • Merge clip via audio synch option not available?

    The dialog box which should hypothetically allow me to merge device-captured audio to DSLR footage via an audio waveform analysis is not available. I'm using CC6, totally up to date, so why is this feature not included?

    I finally got it to work.  I had to select the Realtek Digital Output, disable the Speakers option and then restart iTunes. 

  • Importing CD's, shows as 'Not Available'

    This problem has plagued me for around a month or so now, and my mrs is driving me nuts moaning she cant upload her new cd's.
    I've tried, read all the 'fixes', performed installs etc.
    I've run a diagnositcs check and pasted it here, if anyone can see where its all gone wrong, any help would be greatly appreciated.
    Just to sumarise, i put in audio CD, iTunes asks to rip it, click ok, it rips some song normally, then just whips through em all really fast. Once it says its 'finished' i check in the music folder and the songs are there, wont play, shows not available in song length section
    Thanks in advance
    Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 1 (Build 6001)
    XFX78I XFX nForce 780i 3-Way SLI
    iTunes 10.1.1.4
    QuickTime 7.6.9
    FairPlay 1.10.14
    Apple Application Support 1.4.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.3.0.69
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.3.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 1A1B4C214A39803F
    Current user is not an administrator.
    The current local date and time is 2011-01-02 15:42:11.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GTX 280
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 10.1.1.4 (x64) is currently running.
    iTunesHelper 10.1.1.4 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    ** CD/DVD Drive Tests **
    LowerFilters: AnyDVD (6.7.4.1),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: HL-DT-ST DVDRAM GH22LS50, Rev TL01
    Audio CD in drive.
    Found 13 songs on CD, playing time 50:06 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:54:45
    Track 3, start time 07:37:26
    Track 4, start time 11:22:04
    Track 5, start time 14:53:51
    Track 6, start time 19:25:57
    Track 7, start time 23:23:40
    Track 8, start time 26:42:69
    Track 9, start time 30:57:65
    Track 10, start time 34:44:63
    Track 11, start time 39:04:70
    Track 12, start time 42:47:57
    Track 13, start time 45:58:47
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40 48.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    XFX78I XFX nForce 780i 3-Way SLI
    Crikey ... that's a brand and model name I'd never seen before.
    Do XFX have a support site with downloads and drivers for your/her model of PC? Checking, because there's newer LG firmware available for the GH22LS50 (rev TL03), but if the PC manufacturer provides their own tweaked versions of firmware and drivers and whatnot, it's best to get that firmware rather than going to (in this case) LG and getting the firmware they supply for the drive.

Maybe you are looking for