X-Fi Elite Pro: Can't Insert FX with 96 kHz Sampling Rate

I can't seem to Insert FX with 96 kHz Master Sampling Rate set.
"Unable to load effect. .... user lower Master Sampling Rate or unload effects"
but there are no extra effects loaded (except default Reverb and Chorus aux effects).
PIV 2.8 GHz? 52 M RAM

Hi Daniel,
Thanks for taking the time to reply to my post. Here are my hardware specs:
CPU: AMD Athlon 64 X2 3800+ 2.0G
Motherboard: Foxconn <FONT face=Arial>NF4SK8AA-8KRS NF4SLI
Memory: WINTEC AMPO 52MB 84-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered (2GB total)
Power Supply: COOLMAX CW-650T (650 watt, SLI capable)
Floppy Dri've: MITSUMI .44MB
Video Card: (2) GE Force 6800XT running in SLI
Before I attempted to install the X-FI Elite Pro, I did have a problem getting the video card to work, but I found that the solution to that was to change the voltage setting on the power supply. After I solved this problem, I tried to install the soundcard, which as you can see has opened up a new issue.
The beeps are constant, and the computer looks like it is attempting to reboot with each beep.
I'm not sure what the power supply is rated for. What do you mean by that? I know it's SLI capable whatever that means.
I'm not sure if the BIOS has power settings for the PCI bus. If it does, do you recommend a particular setting?
Thanks for your help.

Similar Messages

  • In creating a fillable PDF in XI Pro, can I insert a table which can be tabbed through?

    In creating a fillable PDF in XI Pro, can I insert a table which can be tabbed through?

    You're in luck. Create the first field and then right-click it (in Form Edit mode) and select Create Multiple Copies. You'll be able to specify how many copies of the fields to generate, and at what intervals. The nice thing is that although the properties of the new fields will be identical to the source one, they'll each have a unique name, so you'll get an instant "table" of fields.

  • When dictating, can I insert punctuation with my voice or can it be done manually? If I say the word comma, will I get "," or will I get "comma" and is there a way to fix that?

    When dictating on Ipad, can I insert punctuation with my voice, as in if I say "comma" will I get "," or will the word "comma" appear? Can I manually insert punctuation as I'm dictating, such as: If you wouldn't mind, (tap on comma on pad), may I ask a question? (tap question mark on pad). OR, do I just say everything I have to say and then go back and punctuate by hand? Obviously, saying "comma" and getting "comma" is NOT going to help out my sentences!

    weird. When I do it, I have to spell out comma and period if I don't want the punctuation... I just tried the exact same phrase and got "As I said, please don't disturb me." Is there a setting under dictation that says something like "spell out punctuation"?

  • If I buy a Macbook Pro, can I sync it with my desktop iMac?

    If I buy a Macbook Pro, can I sync it with my desktop iMac?

    If what you mean is whether you can move all your files to the new Mac, SURE -- that is easy.
    Daily Local sync-ing seems to have been removed from 10.9 Mavericks, which would come pre-installed on a new Mac.
    You can sync through iCloud or a Server you control.
    File Sharing between Macs on a network remains available.

  • X-Fi Elite Pro, can't hear PS2/X

    Hello. I tried to search the forums, but I either searched poorly or I couldn't find a similar issue.
    Here's the problem -- I can't hear either my PS2 or my Xbox using the Elite Pro on my PC.
    Hardware:
    [The good part]
    PC does not have on-board audio for the motherboard (no need to flip a BIOS switch).
    I have the SoundBlaster X-Fi Elite Pro PCI card plugged into an open PCI slot on the motherboard.
    I installed the drivers from the CD as per the instructions. After the drivers are installed, and the reboot occurs, I can hear my normal PC sound perfectly through my headphones (I only have headphones. Speakers will come later).
    Initial hardware check - PASS.
    [The bad part]
    I plug the two RCAs (Left/Right) from my PS2 into the back of the Elite Pro exterior console.
    I plug my Xbox into the back of the exterior console as well, only this time into the optical input using Monster cabling.
    That's what I have set up. No matter what I've tried as far as configurations go on the software side, I cannot hear these two devices. Either through the fancy-graphics Creative Console Launcher, or from XP (SP2)'s Control Panel > Sound options... I just can't hear anything (Playback or Recording options, Mute boxes, volume sliders, etc). I've also tried flipping the Aux2/Phono switch on the back of the exterior console and then trying everything I already tried all oer again.
    I'm at a loss as to why I can't hear anything. I went to the store and picked up a RCA-to-Stereo converter and plugged the PS2 into the Microphone/Line-In port on the exterior console, and I could hear the PS2 through that. There are several reasons why that is an insufficient fix to my problem: ) I'd like to hook up the Xbox and PS2 at the same time. 2) I play World of Warcraft, and need the microphone slot freed up so that I can speak to my guild, and not have to crawl behind my machine every time I want to switch what I'm doing. 3) I paid for the Elite Pro specifically so that I could set all this up.
    If anyone has any suggestions, by all means let me know!Message Edited by Gimpifier on 09--2006 09:48 PMMessage Edited by Gimpifier on 09--2006 09:49 PM

    Ok, as you see in the picture, there are several mixer stri
    ps.
    All of them are related to the upper tabs. So:
    The Inputs tab bares all the available inputs on your rack and PCI card (just Line In for the latter).
    The Multi-Channel Wave tab bares all the outputs available on your rack and the PCI.
    Those two tabs are the most important right now.
    As I noted earlier, the problem occures either from a mute selection in the Auxiliary 2 strip or a 0% setting to the volume slider of the same strip. Otherwise, you are routing the Aux2 to an output not connected to your speakers. From what I see, no "Mute On" is apparent and you are routing every input to Front L/R Output. Have you tried plugging your headphones to Front L/R and select "2/2." as speakers?
    You should also select the monitoring to "Recording" and not to "Playback" (found at the blue field, bottom right). This will enable you to see the input level for your recording source (Aux2 in your case, correctly selected by you).
    Your speaker selection is set to "Headphones". Are they connected to the front output?
    It might be better to do some troubleshooting. So:
    What is the real problem?
    No signal from Aux2 input?
    No signal from the headphones output?
    You say that:
    Gimpifier wrote:
    The RCAs are li've and working. If I use the Stereo adapter, I can plug them into Mic-In/Line-In and I can hear them if I swap to Line-In. The problem is getting them to work as they are intended, so that I don't have to monkey behind the PC when I want RCA audio.
    Can you be mor specific on this? Li've and working? You mean li've from the PS2? Get them to work as intended?
    Message Edited by Chastity on 09-3-2006 08:46 AM

  • OWC Mercury Elite Pro External Hard Drive - Share with Windows Machine?

    Hi,
    Others on this discussion have recommended the OWC Mercury Elite Pro External Hard Drive. Dumb question: my live-in girlfriend has a Dell XP laptop, and I have a MacBook. If we purchased an OWC hard drive with both firewire and USB, can we both use the external hard drive?
    Thanks, David

    You can certainly use their drives between a Mac and a PC. As mentioned, either format it FAT32 witht he 4GB file size restrictions or partition it.
    You can also use a program called MacDrive. It give a Windows machine that ability to read and wtite to HFS+ partitions. I have used it and it works nicely.
    There is a timed demo, so you can try it out and see if it meets your needs.

  • How can i insert values with single quote (')

    How can i insert a values like ABC's ?
    Edited by: LuKKa on Oct 6, 2010 12:48 PM

    LuKKa wrote:
    I want to insert like this :-
    INSERT INTO myTab values ('This is belong's to ABC's ');
    Then how can i do ?In a old style you can do this
    insert into mytab valeus('This is belong''s to ABC''s');

  • Can't insert glyphs with Indesign CS5 under Mac OS X snow leopard

    Hi,
    I justed moved to Indesign CS5 on Mac OS X Snow Leopard.
    I can't insert the glyphs.
    I can open the glyph panel, I see the glyphs but when I double click they don't insert.
    Does anybody know this issue and how to solve it?
    Thanks for your help.
    Regards
    Anne
    Message was edited by: AnneMLV

    Try restoring your InDesign preference as described below:
    http://forums.adobe.com/thread/526990

  • Can't find where to change audio sample rate

    I'm trying to change the audio sample rate but can't find where to change it

    You can change it in SoundTrack Pro, or with QuickTime Pro.
    -DH

  • Can i use double buffering with SCAN_Sequence_Setup and sample rate divisors?

    If possible I would like to use double buffering when acquiring multiple channels at different rates using SCAN_Sequence_Setup. What are the tricks to sizing the buffers, if any.
    PCI-MIO-16Xe-10 and PCI-6052E are the boards I'm writing for, using Borland C++ builder under Windows2000
    Thanks,
    Brady

    Hello;
    At this time, you can't set up a multiple Scan Rate for different channels at same DAQ board. But, you can set up your Sample Rate to the fastest required to acquire you fastest channel, and then discard the readings of the other channels and only take the values for the different channels at their theoretical rate.
    Hope this helps.
    Filipe

  • Why can't I record in 96.000 khz sample rate ?

    I am running Logic Pro 9.1.7 (1700.57) (32-bit). My computer is Mac OS 10.6.8. I am using a Duet Apogee
    I have always recorded in 44.100 khz, but now someone has asked me to record in 96.000 khz. Everything is fine until I change the sample rate in Logic. Then I get a tinny, distorted sound, and this is for any audio I play through my computer, not just the track that's in Logoc. Is there a way out of this ?
    Thanks

    You own the hardware and don't know how to use it?
    Didn't you install some software for the Duet? Somewhere on your system will be a software applet that let's you change settings on the Duet.
    I just took a quick look online.. the "Maestro software Mixer Applet". Try looking in Applications or Utilities.
    Need to read up about what you're using. Do not change Duet settings with Logic running.
    I don't own a Duet but all of this stuff works basically the same.

  • MacBook Pro can't use Silverlight with Chrome, Firefox, or Safari

    It's a relatively recent issue, within the last month or two, but I can't stream any videos on Netflix. Initially it was just an issue with Firefox, but now I can't use it at all with Chrome or Safari no matter how many times I install or uninstall the Silverlight plugin. My Macbook Pro will act like it's going to load the movie (black screen with blue dots in a circle) but then times out saying there's an error. I always get error code 2014 on the Netflix screen that says the issue is likely with Silverlight. I am able to successfully stream on my imac.
    I've tried everything I can think of (I'm not very tech savvy so I'm SURE I've missed something). I've gone through my application and internet plug-in folders and deleted everything having to do with Silverlight. I've also emptied the trash before trying to redownload it. I've also tried deleting cached information and cookies from all of my browsers and messing with the preferences trying to make it possible to use.
    I would really appreciate any help you can give.

    I'm wondering whether you have any background software running that might be causing the problem, Sebastien?
    Fax software, anything that adds its own devices to the menubar, etc, perhaps? "Content Barrier" and "Speedtools" are pieces of software that I have seen linked to this issue. Virus blockers generally might be worth considering as possible causes.
    Can you think of anything that you have installed that might have created third party system extensions ("kexts") that could be interefering with the regular processes?
    A clean OS install might really be the best solution, though it is time consuming of course.
    Rod

  • Help on installing Lightroom 5 on two computers... I have used it on a PC, but now I have bought a MacBook Pro, can I install it with the same license? If not, can I delete it on the PC and use it on Mac instead??

    Hi all,
    I just read, that you can't install lightroom 5 on the same license on two different platforms because of different services provided.
    Is it possible to delete the PC-version and continue solely with the MacVersion!?
    kind regards, and thanks in advance
    Andreas

    Unless things have changed your Lightroom purchase can be used on two PC's, 2 Macs, or one of each.  You just need to download the Mac version and install it on the Mac.  You should not have to do anything with the PC installation.
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • How can I figure out, (and control), the sampling rate of my IMAQ board using LabVIEW?

    My IMAQ board is sampling at a certain rate and I do not know what it is... how do I figure this out using labVIEW? Also, how can I make sure that it is not waiting any time at all for sampling i.e. it is not waiting for any wait time functions or any of them other things that cause the program to slow. The reason that I want to do this is because the Kodak Imaging board that I am using seems to be delivering at a much higher rate and no my graph there are major gaps between each sample according to the time plot (for instance it goes from 178280 to 178290 all the way by 10's to 178340. But when the program is running continuously it has gaps of like 355 or so miliseconds I guess.
    Maybe that is just the time that it takes for the program to refresh itself, I am not sure. where could I find where this missing information is going?
    Thanks much,
    Brian

    Brian,
    Your IMAQ card should be sampling at the same speed of the camera, as long as your camera isn't exceeding the cards limits.
    As for how many images you're acquiring in your program, it depends on how long it takes for you to finish one loop of your code. It sounds to me that you may have a lot of processing happening after each grab, therefore slowing down the system.
    Try to comment out your processing (maybe with a case structure set to false) and output only your acquired images. See if that makes a difference. You might also try running this on a faster computer.
    BB_Phil

  • How can I add a curve with a different sample rate behind another curve to show it like one in the report

    I saved two curves with different sample rates with signal express in waveform.
    Now I want to add the curves behind and show them in a report. 

    Hello MReizner,
    Both the DIAdem VIEW and REPORT panel use the time information from your Waveform channels (make sure they actually have the waveform symbol, not the numeric data channel symbol in the Data Portal) to plot the data in the same axis system.
    In the example below I have two waveforms, one sampled at 5 Hz and one sampled at 1 Hz, both in the same axis with the same time channel. All I did was drag the data from the Data Portal onto the axis. DIAdem automatically takes care of creating the correct time channel and plotting the data with the correct points if the data is stored as a waveform.
    I hope this answers your question, please let us know if further clarification is required ...
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Maybe you are looking for