X-Fi Elite Pro - Recording from the Phono Input Prob

Kit:?
Vista x64
4GB Ram
Q6600
X38 Mobo
X-Fi Elite Pro
Audio is taken via?Digital Output (not the optical one) from the External box to a Sony Cinema Amp.
Have installed using the Vista X-Fi CD and updated to the July 2008 drivers.
Problem:
Unable to record from the Phono input on the external breakout box, in fact only the Line-In on the actual card seems to work, but when recording via the Creative Entertainment Console the recording has what sounds like reverb applied to it. Recording via Vista's Sound Recorder produces a clean sound but is in WMA and very low quality.
Other Obvious Problems:
Have to manually select the Input port via Vista's Sounds Panel, by setting the required input as 'default device'.
Headphone socket on the external box doesn't anything coming out of it.
Question:?
Has anyone sucessfully recorded via the Phono input on an Elite Pro under Vista x64, and if so how
Thanks.
Message Edited by 0idsjagf on 08-07-2008 2:56 PM

Huhu, right-click onto the window where all devices like microphone or speaker output are listet (record, playback) (Controlpanel " sound") Then you have the option to enable "show deactivated devices" maybe then the phono input is available to your needs.

Similar Messages

HT3775 can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document "SC1ATK63.mov" could n

Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."

Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown

X-Fi Elite pro (recording questi

Hi,
I am looking at getting the X-Fi Elite pro, mainly for music/recording purposes. One of the important features I am looking for in a pc sound system is the ability to record VOICE and MUSIC at the same time (as in the Karaoke environment).
Currently my Asus P4P 800-E Dlx board has the onboard AC97, but for some reason I am not able to record voice and music in "stereo mix" mode, and of course doing Karaoke on an onboard sound system is not the best thing.
My question is: will I be able to record both voice and music (in stereo mix mode, or however way it might be) with this X-Fi Elite pro?
With the price I am going to pay for, I really want to make sure I get what I am looking for.
I hope all of the pros here can give me some light. Thank you!

Hi jutapa,
Thank you for your reply to my question. sorry it took me awhile to get back to the forum. I finally bought the system (just a few days ago).
To answer your question: yes, I meant recording with the background music from my pc + the mic, both at the same time as I used to be able to with 'stereo mix' mode. I can hook up external devices for recording. but what I want for a quick recording is just that. what puzzled me was that I used to be able to record that before I reinstalled my windows xp pro. however, talking of what is now, with this new xfi elite system, I am still unable to record the background music + mic from my pc. it's a little frustrating when I couldn't find the cause for why I lost that function, and now after having bought the new sound system, I still cannot do what I want to do.
Has anyone here able to do recording with both background music + mic internally from pc with this xfi elite system? If so, please shed some lights. it would be greatly appreciated.
Thank you in advance.

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Delete record from the form and from the database

hi,
i want delete record from the form and the database ,but the record is only delete from the from !!!
this is my code :
if //condition then
delete_record;
commit;
end if ;
Any solutions ??
thnx

You have unique key field(s) on the table you are trying to insert which actually restricts you from inserting the same value again.
When you are deleting the record and issue commit there is a record to be inserted in the table which is a duplicate that's why you are getting this unique error.
As oracle is not able to insert your commit fails and stops your deletion of record from table

How to delete the child record from the database

how to delete a parent and child record from the database can we do it in the servlet and my database is oracle

I'm not sure I understand the question but you could certainly use the JDBC API from within your servlet to access and modify a DB. You could also use an EJB layer to access your DB and accomplish the same tasks.

How to delete the single record from the ODS

HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay

Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash

How to find out top 10 records from the R/3 using Java code (WD Program)

Hi Experts,
I have used Java Web Dynpro program to fetch records from the backend. Following code helps me and fetches record. As per the customer reqirement, we have to fetch only top 10 records (Actual Cost) from the backend. So I have to modify the Java code. How I can do so? Please help.
 wdContext.nodeGraphData().invalidate();
 IPublicCostcnt.IGraphDataElement categoryElement;
 for (int i = 0; i < wdContext.nodeItab_Final1().size(); i++) {
 categoryElement = wdContext.createGraphDataElement();
 categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
 categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
 categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
 wdContext.nodeGraphData().addElement(categoryElement);
Regards,
Gary

Dear SDN Users,
This is how I resolved the issue.
1) Requested ABAPer to provide me sorted data. The data has been sorted in descending order of actual_cost.
2) After that I used following code. This resolved the issue.
 if (wdContext.nodeItab_Final1().size()>10){
 IPublicCostcnt.IGraphDataElement categoryElement;
 for (int i = 0; i < 10; i++) {
 categoryElement = wdContext.createGraphDataElement();
 categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
 categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
 categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
 wdContext.nodeGraphData().addElement(categoryElement);
 if (wdContext.nodeItab_Final1().size()<=10){
 if (wdContext.nodeItab_Final1().size()>0){
 IPublicCostcnt.IGraphDataElement categoryElement;
 for (int i = 0; i < wdContext.nodeItab_Final1().size(); i++) {
 categoryElement = wdContext.createGraphDataElement();
 categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
 categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
 categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
 wdContext.nodeGraphData().addElement(categoryElement);
Regards,
Gary

I want to diaplay my records from the databasewith 10 records per page. i l

i want to diaplay my records from the databasewith 10 records per page. i learned that it can be done through pagination . Please can anyone there help me and give me the code of how to page my records in my jsp pages
I have small code ,but its not working....
below is the code....
public ResultSet codeResult(int i){
if(dataSource!= null){
 try {
 con=dataSource.getConnection();
 stmt=con.createStatement (ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_READ_ONLY);
 int maxRows=stmt.getMaxRows();
 System.out.println("the maxRows is:"+maxRows);
 System.out.println("the I value is:"+i);
 if((i < 0) || (i > maxRows)){
 i=0;
 stmt.setFetchSize(i);
 long t = System.currentTimeMillis();
 rs=stmt.executeQuery("select asc_code,countrycode,asc_name,asc_address1,asc_address2,asc_city,asc_country,asc_region,asc_contact_person,asc_contact_no,asc_email_id,asc_fax_no,nso_incharge,nso_email,ar_ap_code from asc_master order by asc_code asc");
but,its giving all records...
any one help me on this........
Thank you,
D.Nagireddy.
 } catch (SQLException e) {
 e.printStackTrace();
 return rs;
 }

hey, here my code for paging. hope it helps...
 public void DueRecordInfo(int page,int MAX_PER_PAGE)
 con = new DBConnection().getConnection();
 try
 Statement stmt = con.createStatement();
 String sqlcount = "SELECT COUNT(*) FROM INFO WHERE TO_DATE(DATEUPDATED,'Month DD, YYYY') < ADD_MONTHS(SYSDATE,-6) AND OBSOLETE LIKE 'No'";
 ResultSet rscount = stmt.executeQuery(sqlcount);
 rscount.next();
 total_row_count = rscount.getInt(1);
 lowerbound = (page * MAX_PER_PAGE - (MAX_PER_PAGE))+1;
 upperbound = lowerbound - 1 + MAX_PER_PAGE;
 String sql = "Select * from "+
 "(SELECT row_number() over(ORDER BY TO_DATE(DATEUPDATED,'Month DD, YYYY') DESC) AS RN,ID,SPECNO,REVISEDNO,DATEREVISED,TITLE,ORIGINATOR,DCBNUMBER,DCBLOCATION,OBSOLETE,DATEOBSOLETE,WORDFILE,PDFFILE,DATEUPDATED FROM INFO WHERE TO_DATE(DATEUPDATED,'Month DD, YYYY') < ADD_MONTHS(SYSDATE,-6) AND OBSOLETE LIKE 'No') " +
 "WHERE RN BETWEEN "+ lowerbound + " AND " +upperbound;
 ResultSet rs = stmt.executeQuery(sql);
 while (rs.next())
 id.add(num, rs.getString("ID"));
 specno.add(num, rs.getString("SPECNO"));
 revisedno.add(num, rs.getString("REVISEDNO"));
 daterevised.add(num, rs.getString("DATEREVISED"));
 title.add(num, rs.getString("TITLE"));
 originator.add(num, rs.getString("ORIGINATOR"));
 dcbnumber.add(num, rs.getString("DCBNUMBER"));
 dcblocation.add(num, rs.getString("DCBLOCATION"));
 obsolete.add(num, rs.getString("OBSOLETE"));
 dateobsolete.add(num, rs.getString("DATEOBSOLETE"));
 wordfile.add(num, rs.getString("WORDFILE"));
 pdffile.add(num, rs.getString("PDFFILE"));
 dateupdated.add(num, rs.getString("DATEUPDATED"));
 num++;
 con.close();
 rscount.close();
 rs.close();
 stmt.close();
 }

How to fetch records from the database into a combo box?

Hi:
I´m really new with ABLBPM and I´m trying to fetch records from the database to display them into a combo box as valid values for a presentation but I´m using a dynamic method with this code:
for each row in SELECT campo1, campo2 from TABLE
do
solicitudes[] = [row.campo1, row.campo2]
end
return solicitudes
And the debugger says that SQL instructions can be used only in fuctions and procedures that are executed on the server.
Do you know another way to do it?
P.D. Sorry for my terrible english
Greetings

Hi Steve,
Thank you, your idea is perfect, but when I try to run the screenflow where the combo should be filled I get this error:
fuego.lang.ComponentExecutionException: No se ha podido ejecutar correctamente la tarea.
Motivo: 'java.lang.NullPointerException'.
 at fuego.web.execution.InteractiveExecution.setExecutionError(InteractiveExecution.java:307)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:166)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.webdebugger.servlet.DebuggerServlet.redirect(DebuggerServlet.java:136)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:85)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
 at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
 at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
 at fuego.web.execution.servlet.ServletExternalContext.processAction(ServletExternalContext.java:110)
 at fuego.webdebugger.servlet.DebuggerExecution.dispatchComponentExecution(DebuggerExecution.java:64)
 at fuego.web.execution.InteractiveExecution.invokePrepare(InteractiveExecution.java:351)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:192)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
 at fuego.webdebugger.servlet.DebuggerServlet.doDebug(DebuggerServlet.java:148)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:82)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
Any ideas??
Thanks and greetings

How to record from the video in or S-video Ports on Qosmio G40?

Can anyone tell me how to record from the video in or S-video ports, because i've tried the Ulead DVD factory program and the only capture device it could see was the webcam, and it did capture from it
After that i've downloaded the update file that was provided by the support website
The devices that the program could see are the TV tuner and the webcam (which it couldn't access anymore for some reason)
After that i've downloaded a newer update which simply is the same as the last update and seems that someone in the support website directed the link of the new update which they don't have to the file of the previous update which doesn't really do anything.

Hi
There are 2 s-video ports; s-video out port is not designed to capture the signals from any external source. The name of this port says everything; its an OUT port!
The s-video-in port must be placed at the right side of the notebook. Dont mix the both ports. But note; this port receives only the video signals. To hear the sounds, use a video cable to connect the sound terminals of the audio device and your computer.
Red: sound right channel
White: sound left channel
The Ulead DVD Movie factory can be used to capture this signal.

I cannot install a previously purchased version of acrobat 9 pro downloaded from the site. Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe". What to do?

I cannot install a previously purchased version of acrobat 9 pro downloaded from the site. Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe". What to do?

Hi hgratz,
Considering 'invalid serial number' error for Acrobat 9, I would suggest you to please refer the KB doc link mentioned below:
Error "Invalid serial number" | Acrobat 9 | CS4
Let me know if that helps.
Regards,
Anubha

How to rerieve records from the table starting with character 'D'

Hi Folks,
How to get the records from the table starting with character 'D'.
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
last record in the table starting with character 'D'
How can i do that??
Pl explain.
Thanks,
Matt

Hi,
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
Select MAX (fld1)
From tab1
into table itab
where fld 2 = l_fld2
and fld1 like 'D%'.

X-Fi Elite Pro - Recording from the Phono Input Prob

Similar Messages

Maybe you are looking for