X-Fi Fatal1ty Pro cannot see 5.1 Dolby Digital input via Optical link (mods, please he

X-Fi Fatalty Pro cannot see 5. Dolby Digital input via Optical link. I am pumping my Xbox360 through the Digital I/O dongle and every thing works OK using Dolby Stereo, outputing to my 5. analog speakers. However, it does NOT work when choosing Dolby Digital 5.. My SPDIF tab just says unknown input.
Please help, this is very frustrating...

Ok, for those who also wanted to know the outcome, I though I'd post.
I was told that the dongle cannot decode 5. to analog, but the Dri've Upgrade and the Console Upgrade could (at $80/$80 vs. $5).
Great.
So what I want to know is this:? what chipset or connection is Creative putting in the Dri've Upgrade and Console Upgrade? It seems to me that the card should be doing the decoding, not the type of optical port. If it's getting the signal, then what is the problem? Is is that the flexijack cannot output/input 5. at all, only stereo?
Anyway, the Digital I/O dongle is going back, the thing is useless for my purposes. While I can hear 360 games fine, DVD's on it default to 5. if they have that type of audio, and there is no way to switch it to stereo; it gives me only silence then.
And mods, nothing in my frustration is with you; you seem to be very helpful and responsi've. I just wish the rest of the company would get on the ball.

Similar Messages

I am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

i am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help

Is your version of Skype known to work with your operating system version?

I switched from an iPhone to a Galaxy s4. Everything seems ok except text messaging with people who have an iPhone. I can send them a text, they can see it, but I cannot see what they text back. What can I do please?

I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging. I can text, they can see it, but I cannot see their response if they are using an iPhone. Can you help me with this? What do I do please?

Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC
Please keep us posted, and let us know if this resolves your issue!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

HT2486 I am sending an email to a group which I have created in my contacts. I would like to hide the list of people's emails but cannot see how I can do that. Can anyone help please?

I am trying to send an email to a group which I have created in my contacts. I would like to hide the list of email addresses but cannot see how to do this. Can anyone help please?

Thank you for your message.
I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it)....

Premiere pro cannot see some media files

I did a Time Machine restore to two weeks before. When I opened a project I was working on in PP, the media files were not recognized. My camera produced MTS files (Sony fs100). Till this point, after two years of using it, have had no issues. I uninstalled PP (CC) and reinstalled it. It can read my media files, but it still won't read some .mpeg or .avi files that it previously could. Is there something else that should have been installed? Is there codecs that might be missing? Thanks, in advanced, for your response.
Werner

What error message are you getting?
Rename the folder that contain the mpeg and avi.
See if that will help.

Numbers App On MacBook Pro Cannot See Numbers Files on iCloud ......

I am running a MacBook Pro (8 GB) OS X Yosemite (Version 10.10) with Numbers (Version 3.5). When I upgraded to this latest version, Numbers worked fine for few weeks, then I could not access my Numbers files on the iCloud. I can access my iCloud files on my iPhone, iPad, and Safari. However, Numbers on my MacBook Pro does not show any files on iCloud,
Please assist ........

Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.

I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot discover the TC it is connected to.
I tried connecting after hard-reset (poke/power on), it would see the TM but then hang forever reading the configuration. So I set it up with MB Pro and MB White and both are now working fine with TC/TM. Then I tried MB Air and it failed.
The TC is connected via ethernet to Sagem router (bridged mode) which supplies WAN and DHCP, it has its own WiFi as well.

And by the way, Hi Everyone, how rude of me not to greet you in the post.
Thanks for any help!

Cannot see application in workspace (Created App via HFM client not BPMA)

Dear All,
I have some trouble with my 11.1.1.0 installation. After installation and configuration, I try to goto workspace to find consolidation administration and cannot find it. Then I tried to create an app using the HFM client but after granting all security to the user account, the application will not show up in workspace.
Is there anyway to un-register the HFM installation from Shared Services and Workspace and re-register the HFM installation. There is an option in previous Hyperion version 9 but in 11.1.1.0 there is no such option under the EPM configurator.
Can I fix it or it's pretty much a re-installation. Please give me some advice
Thanks in advance

Tried uninstall HFM and reinstall again.
Ran EPM onfigurator and everything seem to processed ok.
I can log onto Shared Service and see that I have created an HFM Application and be able to provision users to the application.
But when I log onto Workspace, it just won't show anything related to HFM, the application is not on my application list and under "Classic Application Administration" only Planning shows up and no HFM.
I have Apache running on 19000 and IIS running on 80.
Any idea what I can do to trouble shoot?
I tried to create 2 apps, I using http://compter:19000/hfm as security url and 1 using :80/hfm and neither makes any difference.
Edited by: Redcomet on Oct 15, 2009 7:42 PM

PC cannot see wireless Airport Express using Ethernet on D-LINK DIR-655 Router

This seems to be a recurring issue going way back, but I have yet to see a real solution posted.
I am using my Airport Express (APX) to stream music from the computers on my network to my stereo via Airplay. I have APX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my APX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my APX. I can, however, see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the APX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting the APX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting APX when I turn their wireless connections back on. So, bottom line, I am convinced that this is not a firewall problem. Although I have tried every conceivable setting of my D-Link router and APX, I am convinced it is either a wireless to ethernet communication issue, or some obscure setting on APX.. Any help would be appreciated.
Thanks,
Wayne

I think I found the fix based on reading some Apple TV forums where several people were having the same problem. Under Advanced Network settings in the D-Link setup, I just checked "Enable Multicast Streams" and that seemed to do the trick.

Outlook 2010 cached mode cannot see GAL but Outlook 2007 can via Exchange 2010

Hi,
I have a problem similar to
this but with a different cause.
Our OAB config looks good from both Outlook 2007 and Outlook 2010. Both can see the GAL in non-cached mode but in cached mode only 2007 can see the GAL. In 2010 it's just not there. Even the same user can only see it in 2007.
Does anyone have any suggestions as to why this is?
Cheers,
Rob

Hi,
I have got the same issue, that I can't see updated OAB in outlook 2010.
Can you share the detailed path of the locations you have mentioned here:
In Office 2010, this happens but these values also exist in the [Service1] section and are blank:
OfflineAddressBookPath=
OfflineFolderPathAndFilename=
And how do we add locations to these paths?
Thank you in advance.

My iPhone (5s/8.1.2) and iPad (orig mini/8.1.2) cannot see my Mac Book Pro (Yosemite) and vice versa in Airdrop

My iPhone 5s (current iOS 8.1.2) and iPad mini (ditto) can see each other in airdrop, but neither one can see my Mac Book Pro (early 2011/Yosemite). And the Mac Book Pro cannot see either iOS device.
I have read everything I can find about this and it seems like these iOS devices SHOULD be able to exchange with my Mac Book Pro using Airdrop, but I am unable to make it happen.
Can anyone enlighten me on what might be going on here?

I have been just wandering for quite a night over the web to find out a solution to this particular issue (no mid-2012 mac visible in Airdrop on iOS).
So, I seem to have found it and must share it:
the airdrop started working bidirectional for me after I had changed the following settings to "off" (or whatever it may be called in English version): system settings - network - bluetooth PAN - IPv4 configuration -> off.
If it works for you, please share further, because the problem seems very common with no solution readily offered.

MB Pro CD2 cannot see LW 320 via AsantéTalk

I have an old LW320 that is available to six computers on the ET network without problem. My new MB Pro cannot see the LW320 directly, only as a shared printer. Tried switching AppleTalk on/off, new user account, connecting directly to AsantéTalk rather than via hub/Airport etc, running all the options in Printer Setup Repair, even the old favourite of repairing permissions. No go. I have not yet done an archive and install. Any ideas, please?
MB Pro CD2, 5 other Macs Mac OS X (10.4.8)

I am sorry if I have offended you in some fashion. It was certainly not intentional.
Your flip response did not indicate whether you have, in fact, opened the Directory Access Utility. This is not the same as turning AppleTalk on and off using the Network preference pane. If you have not already done used the Directory Access utility, I recommend it highly.

Cannot see music in the cloud

I own an iMac, iPhone, iPad and Macbook Pro. I can access icloud and play all of my 25000 uploaded tracks and a further 900 purchased from itunes from all devices with the exception of one "My Macbook Pro".
I have vistied the Genius Bar in the apple store, who were unable to understand why the Macbook Pro cannot see any uploaded tracks albeit connected to my iTunes account. I have been asked to contact iTunes directly in the hope support can help me.
When running "Update iTunes Match" a pop up screen appears stating;
"iCloud can contain up to 25000 songs not purchased from the iTunes Store. Recent additions to this computer exceed that limit, and will not be uploaded"
iMatch does not go to step 2 "Matching music with songs in the Itunes store"
Neither does iMatch go to step 3 upload artwork or reamining songs"
I have signed out of my apple account on all my devices reopened them and can access iCloud and my library albeit sadly still not from the Macbook
In Summary I have one device that cannot access iCloud in order to play, download or delete tracks I own and have previously uploaded.
Hoping someone out there has had the same issue.................thanks

Yeah that's just the way it is. I use PCs and it's the same story. It's frustrating but what can you do? In addition I have a bigger annoyance on that everyone I close iTunes and relaunch it on my 2nd PC it tells my there's an error and a lightning bolt shows up in the Cloud icon. I have to sign out, sign in and re-add the 2nd computer everything I turn it on to use iTunes Match. That has driven me crazy but I've gotten used to it.

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

I cannot download photos from my digital camera to Iphoto (version '09). I have been able to successfully do this up to 4 days ago but not yesterday. My camera/device is recognized in the Source List but photos won't download for me to import to library.

I cannot download photos from my digital camera (via a cable) to Iphoto (version '09). I have been able to do this successfully up til 4 days ago but not yesterday (Dec. 25th). My camera/device is recognized in the Source List, but when it tries to download the photos, all I get are the words "Loading Photos" in the area where the thumbnail pictures usually display. The little "gear" symbol next to the words but it just goes round and round. Nothing ever downloads, and instead of showing me how many pictures there are to import it just says "No photos". So therefore I cannot import the photos to my library since they won't even download.
I was getting an error message a few days ago that my Iphoto library was getting full, so I emptied my trash in both Iphoto and on my computer. I had this same problem back in October and emptying the trash and getting rid of some photos did help (can I really be using that much storage space for the pictures?). But it didn't help this time.
Any suggestions as to what to do to solve the problem? I would try taking the SD card out and inserting that into the slot on the computer to see if I could load pictures that way; but the last time I did that, they wouldn't load. Not sure if I lost pics from the disc or not.
Thank you,
Novice50

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

X-Fi Fatal1ty Pro cannot see 5.1 Dolby Digital input via Optical link (mods, please he

Similar Messages

Maybe you are looking for