X-Fi Fatality and Program lagg
I have been reading through the forums and noticed that other people have had similar problems, but not exactly the same problem as I'm having. I recently bought the X-Fi Fatality to replace my onboard sound (which worked fine). The problem that I'm having with the X-Fi is that when I'm using Ventrillo of trying to output and loading ANY type of program (game, Photoshop, e-mail, internet), my output is broken up and choppy. I can still hear everything incoming fine, but no one can hear me for the time that whatever program is loading. After it is done loading, everything is fine. I have never had this problem before, and did not expect to have a problem with a $200 sound card. My PC Specs:?Gigabyte MotherboardPentium Core 2 Duo2 GB DDR 800 RAM52MB ATI X900 Video Card?I have tried everything (and I mean everything) to resolve this issue. If anyone knows anything I don't, please enlighten me. Thanks.
Yes, that's the card I have.
And I don't get an option for DDL License Activation in my start menu, but I do have the DDL pack installed and I didn't need to activate it.
The reason that I asked about a decoding tab is that I've seen screenshots of other X-Fi control panel?tabs and they had a decoding tab.
Also, Creative support says in my earlier link?I should have a DDL icon in Entertainment Mode, which I don't have?
Thanks for the reply, I appreaciate it.
Similar Messages
-
%ALIGN-1-FATAL: Corrupted program counter
I have a router with the following message "%ALIGN-1-FATAL: Corrupted program counter
pc=0xB0D0B0D, ra=0x60F02F08, sp=0x61EEA5B8". The router reload two times, in 5 days.
I also would like to now if there is any kind of cisco tool, avaiable for Cisco parterns, that can help me to understand some comands, like show tech, show context...
In this paticular case i would like to now, what the fiels of the show context below mean.
7200 Software (C7200-JS-M), Version 12.1(9), RELEASE SOFTWARE (fc1)
Compiled Wed 13-Jun-01 11:03 by kellythw
Signal = 10, Code = 0x10, Uptime 4d23h
$0 : 00000000, AT : 61B90000, v0 : 0B0D0B0D, v1 : 00000079
a0 : 633F1DD8, a1 : 61F5170C, a2 : 61EEA610, a3 : 61EEA614
t0 : 633F1DF7, t1 : 3400F901, t2 : 0000000B, t3 : 000B317A
t4 : 604FD930, t5 : 0000002E, t6 : 62628C90, t7 : 61EEA5D0
s0 : 0B0D0B0D, s1 : 61EC9E88, s2 : 00400320, s3 : 00000000
s4 : 0000003C, s5 : 61F5320C, s6 : 633F1DD8, s7 : 61F5170C
t8 : 7002FF8E, t9 : 62CADD10, k0 : 00000000, k1 : 00000000
gp : 61B96A60, sp : 61EEA5B8, s8 : 00000003, ra : 60F02F08
EPC : 0B0D0B0D, SREG : 3400F903, Cause : 00000410
Error EPC : D7F71861, BadVaddr : 0B0D0B0Di know
thats what the TAC engineer was saying as well. he also said that there are a lot of customers running the same type of services we have and there isnt any issue.
We have had some serious issues with a SIP trunk to a provider's GSM gateway, which is why i configured the router as a CUBE. i have configured MTP and transcoding on the CUBE but registered to the CUCM. this has since been removed and all MTP is on the CUCM presently. the crashes occured after this if i recollect correctly.
We were going to attempt to have locally registered MTP resources on the CUBE but we are actually waiting on the engineers (We have another case open for this other issue relating to DTMF) to ensure that when we do configure local MTP on the CUBE,we dont interfere with this present case.
here is the case number and ive attached a crash dump file just in case.
SR 615528219 - CATS: C3845// 12.4(25c)// Crashed// Software Bus Error//
Thanks and i do appreciate taking the look into it for me.
Something i just remembered. as i mentioned, i have the transcoding and mtp configured on the CUBE but they were registered and ASSOCIATED in the resource group list. We REMOVED the hardware MTP from the MRGL but they are still registered. So i have'nt actually shutdown the transcoding and mtp profiles on the CUBE. -
Fields missing in MPD report after change to structure and program
I have been working on a consistency report for transaction MPD.
I had created a structure in SE11 for handling the data. it was all working, but then i had to go and change the name of the fields in the structure. Now those fields are missing from the report.
When i step through the debugger, all the fields are being populated correctly, but these fields are not displayed on screen. if i change the field names back in the structure and change the code for populating these fields, they appear okay.
i have created a custom implementation within BAdi MPD_WKB_REPORTING.
i have checked the config and it all points to my Z Structure and Z Table Type. I have logged off and logged back on! made sure my code is saved and activated...
any ideas on how i can display these new fields names/values?
Just for clarity, the field name has changed. not the linked data type.thanks for your response, however those notes and program have not done anything to assist my issue.
i have found the anwser now!
within the BAdi was a method i had to amend: IF_EX_MPD_WKB_REPORTING~GET_ALV_PARAMETERS
all fixed now! -
I'm concerned that my iMac, purchased 5 years ago, is about the crash and I can't back up my files and programs to an external hard drive via Time Machine because the computer freezes after only a couple hundred MB and gets nowhere near the required amount.
How can I save these files and programs if the computer hard drive fails or has to be replaced without the backup being able to be done? I need to do something quickly, but I'm not sure what I can or should be doing.Get an external hard drive, some good ones that I like are the OWC, http://www.macsales.com Mercury Elite Pro drives...they are very good and reasonably priced.
Get the drive, connect via USB or FireWire, then use Disk Utility to format the new drive as Mac OS X Extended (Journaled), and then use Disk Utility to Restore the current drive to the new drive. Restore actually clones the drive so you will have a bootable backup on the external drive.
After you have formatted and named the external drive, click Restore in the main Disk Utility window, drag the name of the old hard drive to the Source box, and drag the name of the new external drive to the Destination box. DU will make an exact clone of the internal drive on the external drive.
That clone will be a complete backup of the operating system and all of your data.
You can test it by restarting the iMac and hold the Option key. That will give you a grey screen showing all bootable drives. Just click the external drive, then click the upward pointing arrow under it and the iMac will boot from that drive. -
Hi There,
I purchased a new MacBook Pro Retina 15". Since I am using MacBook Pro and I uses Time Machine for backup files and program. Store saleman tell me I can retore my existing program and files from old MacBook Pro to new MacBook Pro computer. After files transfer it seem to be OK. But only Aperture has a problem when every time I open Aperture to edit photos, MacBook Pro ask me to key in the Aperture Serial Number that made me so inconvinent. Did any one have meet this problem and can someone teach me how to fix it, Thanks.
NelsonEither the license files were not transferred or it has to be relicensed.
Remove and then re-install aperture. On an rMBP this should take only a couple of minutes. -
Father's macbook now mine. How can I change name, admin, etc without losing apps and programs?
Hello.
My father bought a Macbook Pro 15' retina 8Gb ram 256Gb SSD about 2 months ago.
He set it up, bought many apps and programs but eventually got bored of it and gave it to me.
He is not a Mac enthusiast and thought he should give it a try but he didn't stick to it.
I'm not a Mac enthusiast either, but a good notebook is an ok present so I took it.
I installed some programs and stuff, tried to learn how it works (I have no idea, I was always using windows), and I think I like it.
However, the MacBook has my father's name, my father is the admin, and all the apps programs etc the he and I bought and installed are in his account.
I have his password though. That's how I've been using it the whole time.
How can I change the MacBook to make it "my own"?
I have an apple ID cause I have an iPhone etc but I'm sure just changing that under the admin page won't be enough.
Will I lose the apps my father bought?
Will I have to reinstall all the programs that I installed while I was using the MacBook? For example will photoshop and capture nx be deleted as if I was formatting a pc and I will have to install them again?
Any help will be greatly appreciated.
PS. MacBook is now running Mavericks OS X 10.9.4 and I want to upgrade.
But first I want to make myself the "owner" to start getting things in the right order.Giving away / Selling your Mac / Resetting the computer to the factory condition
http://support.apple.com/kb/HT5189
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
lunatic_on_the_grass wrote:
Will I lose the apps my father bought?
Will I have to reinstall all the programs that I installed while I was using the MacBook? For example will photoshop and capture nx be deleted as if I was formatting a pc and I will have to install them again?
Yes and yes. -
Conflict between program Mac mail and program Microsoft Outlook e-mail???
Denmark, Kolding, 30th of September 2010
A conflict between program Mac mail and program Microsoft Outlook e-mail?
For several months tried to discuss and resolve with several Apple specialists/support, but without much luck.
Therefore I have discussed these issues with 2 different and independent Mac users to find out in testing other Mac users will have the same problems as outlined in the below mentioned situations.
I will therefore outline the coverage issues, as mentioned, including occurs on my iMac 21.5 " with serial number: <Edited by Host> and 2 friends with their Macbooks of new dates as follows:
1. Sending from my Mac plain mail as "plain text "(during formatting):
Plain text mail as "Plain Text "(during formatting) Verdana font size 10, sent and received on Windows PC with the correct letter size - but with the font changed to Century Gothic!!!
2. Sending from my Mac plain mail "formatted text" (during formatting):
Eg. with my signature/signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text dispatched - the mail received as text with New Times Roman size 12 and signing /signature color Verdana now in size 13.5!!!!
3. Sending plain mail "as normal text "(during formatting)
In the mail text underlined and made bold - the program asks whether to convert to RTF format (to keep underlining, bold, etc.) and Verdana as font and size 10, YES - this mail is received on the Windows PC as text with New Times Roman with the desired underlining and bold text and size 12!!!!
4. Plain text mail as "formatted Text"
Eg. with signature / signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text sent - received as text with New Times Roman and signing / signature as colored Verdana now in size 13.5!!!
5. Sending mail with file attached:
After producing a normal text document modified to PDF and directly from the Adobe Reader sent this PDF file in e-mail formatted as normal text with font Verdana 10 point, with signature. This is received on the Windows PC with a PDF file OK, but the font of the mail text is changed to Century Gothic and missing signature. Signature is available as an attachment on the Windows Outlook e-mail program as a ATT00113.text file. This can be opened and there is the missing signature!
6. Sending e-mail with photos directly from iPhoto
iPhoto opens and click on the desired photos eg. 5 pcs. (Exactly as mentioned in the demo video!) and click on the e-mail icon at iPhoto and the program opens and e-mail that is opened with the attached photos and rich text is being used in the mail. Signature disappears and must be clicked on the mail by the sender.
The mail is received with the attached pictures OK - text changed to Times Roman with the desired bold - though no signature and 5 pcs. Att0028.html files attached. These can be opened and contains the file number each picture!
The above problems can be partly avoided by the following:
1. Only send mails as plain text
Without any underlining, attachments, etc.. When the Windows PC Outlook receiver opens the mail where only the text fond is changed!!
2. Sending mail with attached file
Start opening the mail program and use formatted plain text first and then attach (with the staple) file, and the Window receiver will get the file, but text and signature changed to Times New Roman size 13!!
3. Sending mail with photos from iPhoto
Start by opening mail program text in Verdana 10 and click the Photo Browser and find (look for - takes its time!) the pictures you want to send and pull/drag them into the mail and send, - images, text and signature are in the mail on Windows PC - but with the font changed to Century Gothic!!!
If sent as formatted text with various underlining, italics, etc. together with the photos will be received OK - but the writing is now New Times Roman size 12 signatures Verdana now in size 13!!!
I must say – I am disappointed with the Mac mail program – it actually means that sending a perfect mail with underlining, colours, a.s.o. also photos directly from iPhoto – will received at a Windows computer in a totally mess.
Looking forward to some good news from either Mac supporter or some clever Mac users who can help me to adjust my Mac to avoid these problems IF POSSIBLE!!!!.
Apple/Mac is too good a product to make these problems!!
Best regards
Peter Larsen
<Edited by Host>Welcome to Apple Discussions!
The PC sets the font on its side, the Mac does on its side for plain text. There is no "font size" in plain text coding. Rich Text gives you a bit more control, but only if both e-mail clients support it. HTML gives you a bit more control, but only if both e-mail clients support it. Use the asterisk, parenthesis, underscore, or any keyboard symbol that is part of the original ASCII. Otherwise, the chance is nobody else will be able to read it who does not have your e-mail client in the same version.
Sadly there are no e-mail standards except MIME for attachment, and even that isn't universally supported. E-mail is not the ideal medium for anything except plain text that is ASCII. To learn more about ASCII, see:
http://en.wikipedia.org/wiki/ASCII
If you want to post a website that is universally understood, see the hints here:
http://www.anybrowser.org/ -
I hope someone can help me to remove iCloud from my Windows 7 PC. For some reason I can't use it, because I can't login. No matter what I do to reset my info, it won't allow me in. I want it gone, for it is to much of a hasel. It isn't listed in Features and Programs, but is in the liste in the Control Panel.
I installed I cloud on my windows & Pro desktop PC. I went into Programs and deinstalled the application. WHen I open Internet Explorer.....Kaspersky opens a green surround window and takes me to www.icloud.com! I no longer have the applications installed!
If I close the window Kaspersky opened and go the the web address, and click on a button to download an audio interview, the site wants to ONLY dowload i-tunes version of the audio file.
I deinstalled i-tunes and still the site only want to send me the i-turnes version of the audio file!!!
I do not want to be constantly bothered by Kaspersky opening the green surround Internet Explore window and taking me to www.icloud.com. I do not want to have web sites only offering to send me i-tune audio files.
For both my I-pad Air and my I-pod Ver 5 I have gone into settings -icloud and gone to the bottom of the list and turned icloud off.
My problem is in on my desktop PC. I do not want to have Kaspersky generate the green surround window and take me to www.icloud.com.
Will someone PLEASE help me. I so wish I had never installed Icloud.
thank you. -
I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?
That would depend on whether your model actually has a hard drive. If you have the new 2013 Retina model, then you have a fixed storage device built-in that cannot be modified after purchase.
-
I installed a new 1tb WD hardrive in my mid 2009 macbook pro along with upgrading from 4gb to 8 gb.
My start up disk is still almost full, booting up is extremely slow, and programs open up by themselves once booted up ex:word, excel.
New TB drive shows up alng with 8 GB but, new hard drive not updating somehere? What am I missing? See screenshots belowThanks for the response, but I'm looking for answers to a few of the other answers before I look at completeing the steps above.
1. Whyis the new TB drive recognized in image 1 but still have the original 256GB size still recognized(and almost full) in image 1 also? The HD should now be 1 TB, not 256 correct? If this were the case, the HD, would only be fraction of full capacity, Where is the disconnect between reconizing the installed tb HD but, it not being used?
2.Image Number 2 shows once again that the new tb internal HD is recognized. However, in image 3, the HD 256GB drive is still shown underneath the new HD. Does this show that I am misssing something, some step, related to confirming the new HD should be fully reconized instaed of this old 256 that still remains?
3. In image 4, the SATA heading, shows the TB hardrive, However, in image 5, the 256GB drive is still being shown under the storage heading? Once again, seems like I've missed some simple step to make this all the same?
4.Why is the start up from boot up soooo slow now. I was never even close to this slow(slower than PC startup slow) before the new HD was installed. IS this common when updraging to a new HD? Doesn't seem right?
5. Why now all of a sudden when the computer finally boots up are certain programs automatically opening up, word, excel, when they have never opened up like this before?
Summary: 1. New memory issues, 2. Very slow start up, 3. Programs opening up automatically at startup.
Until I address these issues, I'm not going to worry about loking through and deleting heavy folders.
All responses welcomed! -
I want to sell my old macbook air, what is the best way to get my files and programs off of it?
I am going to sell my macbook air (2011) as I am replacing it with a macbook pro retina. I want to remove my files and programs from it before I sell it. What is the best way to go about this?
1) Perform a Time Machine or Cloned image backup of your system.
2) Test the Clone tomake sure it works, by booting to it (using the option key).
3) Boot to the Recovery Partition, then perform an erasure, followed by a reinstallation of the OS.
4) Shut off the Mac, after instllation and before the reboot. This will permit the next user to experience a "fresh out of the box" experience.
5) Use the Time Machine or Cloned image to migrate your apps, users & files to your new system, using SETUP ASSISTANT. Do not use Migration Assistant. -
Acrobat 9 and X folders stay in registry and program files.
Hi,
I could see two folders of Acrobat 9 and 10 are present in my program files folder and also in registry. Our installer searches path and copy .api file in the folder.
Now, it would be bit confusing for the installer to pick up the active installed version (either 9 or 10).
Can anyone please let me know how to recognize the active version?See previous message…
Adobe does NOT support this configuration. Any user that does this is doing so AT THEIR OWN RISK.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 20 Sep 2011 10:53:30 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Acrobat 9 and X folders stay in registry and program files.
Acrobat 9 and X folders stay in registry and program files.
created by Atit Shah<http://forums.adobe.com/people/at0122> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3927751#3927751 -
Script and program name for MM:OUTWARD CHELLAN
Hi all ,
can any one give me the script name and program name for MM:OUTWARD CHELLAN.
Regards,
Arun.jHi
There are Std Scripts for PO,RFQ,CONTRACT, GRN , GI Note etc in MM
What is this Outward challan? what is its' equivalent SAP business document?
Check in The Tcode NACE for the relavent one, for the Output applications like MR,MD,EF,ME etc
Reward points for useful Answers
Regards
Anji -
Source monitor and program monitor boxes will not display video in full only half
I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missing the top part. Like people's heads are cut off and can only see body. How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?
This is a known issue with a recent Windows update.
The Fix (post 3):
http://forums.adobe.com/message/5494175#5494175
The Status Update (posts 46 / 52):
http://forums.adobe.com/message/5555797#5555797 -
I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.
If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD
Maybe you are looking for
-
Unable to setup my ipad for my outlook account I keep getting the message unable to verify, although I can send and receive mail from my iMac using the same outlook account.
-
I read that it was difficult to use iSight with XP, but is it impossible? I have a Mac at home and a laptop from work with XP. at the moment, the Vskype is only for PC, and I want to get the iSight to use with both? thanks.
-
Is my CRT TV compatible with Apple TV?
I have a Toshiba 24" (model 24AF42) television with a component video input. It is 3:2, but it displays widescreen DVD's properly. Would it be compatible with Apple TV? It apparently has 525 lines of resolution, if that's helpful.
-
What is Apple's process on feature integration?
I am genuinly curious as to how Apple decide what to include on an iOS update. Why did they go with a camera shortcut on the lockscreen instead of a phone shortcut? Why is it only one shortcut and not two? Why are there no utility/setting shortcuts/t
-
This may be a dumb question but can you change the name of you iPod? I got a new one and I am giving my mini to my brother and he would like the name of the iPod to be changed. Thanks!