X-Fi Fatality Champion 7.1 wont detect my 7.1 speak

hello,
i reinstalled my PC yesterday, and i've been installing all drivers and such...
along with them my x-fi fatality champion soundcard.. here comes the problem
after installing the drivers and the startup console, i wanted to configure them, as i did when i build my computer
but somehow the console wont detect my 7. speaker system (i have a creative inspire T7900 7.)
i tried my cd, i tried updating drivers, i tried standalone drivers (all from creative website ofcource)
but nothing seems to work.. tried about 0 times now.. it only detects 2. 5. and headphones.. if i select 4. or 7. it just flips back to 5. or 2. ...
just time i got the program to detect 7., but as soon as it did... no sounds were playing anymore..
the only sound i was getting out of my speakers was the sound of my own voice if i spoke into my microphone
in 7. though >.<
can someone please come up with a solution for me? as id like my 7. sound back!!
maybe good to know
Vista 64 bit OS (it has worked before, so it should now!)
thnx in advance?

Step : Power down computer.
Step 2: Remove Creative card.
Step 3: Install competitor's sound card.
Creative's drivers are known to have issues in systems with 4GB or more of RAM. The Oct st drivers are probably the worst choice, so far. You could try the Auzentech drivers, but there is no guarantee it will fix your issue.
http://forum.stage.creative.com/showthread.php?t=24495
You will probably need THX console from your installation CD to remap your speakers.

Similar Messages

  • X-FI Fatality Champion wrong detection

    Hello so I just got a X-FI Fatality Champion Series card and when installing it I noticed it shows up as "High Definition Audio Device" in my device manager. ?Now I have ran Driver Cleaner before I put in the card so no left over sound drivers were present. ?Onboard Audio is already disabled. ?Drivers from the CD installed fine, but my problem is I cannot use any of the X-FI sound card software like the Console Launcher, Alchemy, and etc because the X-FI sound card detects it as the?"High Definition Audio Device"?. ?Anyone else run into this issue? Or know how to resolve this?
    EDIT: Running Windows 7 x64 Ultimate

    Got it working after multiple Uninstalls/sweeping all driver files, and it magically worked after the 4th time....
    On the other hand is there anyway to Save your Settings when switching between modesIt seems to mess up my volume and also Mic settings EVERYTIME I switch. ?Mic always unmutes in the playback, mic under recording is turned all the way down. Volume changes, etc etc.

  • I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?

    I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?

    Updating iTunes has nothing to do with an iDevice going into recovery mode.
    If the device is in recovery mode, restore it via iTunes on a computer.

  • Macbook Pro with Retina wont detect monitor on mini display port to dual-link dvi adapter

    So after reading Jeff Atwood's post, I decided to jump and give it a shot. So this week I got my monitor in from Korea, and I already had my Apple mini display port to dual-link dvi adapter, hooked everything up - and nothing. Monitor doesnt show a signal, and no display shows up in user preferences.
    To verify the monitor actually works, i plugged it into my windows box - and boom, right away there it is in all its glory. So I called apple support, after spending about an hour going through the "are you sure its plugged in stuff", the tech finally admitted to being stumped and blamed the adapter. Not to be deterred, I then went to my local apple store and talked them into trying their adapter to rule out the adapter - regardless of the adapter, the mbp wont detect the monitor.
    Just for fun, i tried my old single mini displayport to single dvi, the monitor is recognized, but that obviously cant drive the right resolution, so i just get a backlight. Same deal when i try the hdmi port with a hdmi to dual-link dvi adapter on the end of it. Also tried display port to the same hdmi with adapter on it (the joys of working in a dev shop - cables to test everywhere)
    I have read / tried a ton of things:
    re-installed / uninstalled air display, just to be sure it was gone. went through all my apps just to see if there is anything like this i could think would be effecting it
    install gfxCardStatus to ensure i am on the nvidia (discrete) and not the internal card
    Played with different settings on SwitchResX to try to force the res over hdmi - no love - os rejected each one
    I bought the monoprice adapter wondering if it was just the apple adapter since the apple adapter has been panned, no love from it either
    Reset the PRAM countless times
    I have two other adapters coming in to test with in a day or two - maybe one of those will be magic, but at this point i kinda think its software on the mac. My Spec:
    I am running Mountain Lion with all the latest updates
    New MBP with Retina (2.6g processor, 16gig ram, nvidia video card)
    Here is the ebay link to the monitor
    Now the other weird thing is pretty much universally these auctions say the monitors cant be run on a laptop - which makes no sense to me, because its just a connection, if the video card is strong enough (which my machine better be) it shouldnt matter the source. The listing mentions its a "by-pass" monitor, which is something I and google have never heard of.
    So any sage words to make my day?

    Magic was, I have to have the adpter plugged into the mac, let it recognize all with the monitor powered off.
    then power on the monitor, and boom gloriousness
    For future generations, setup that works:
    1) MacBook Pro with Retina
    2) Monitor From Korea (example auction)
    3) Accell Mini DisplayPort to Dual-Link DVI Active adapter (amazon)
    4) Boot mac, plug in adapter, let it recognize the monitor, power on monitor

  • Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

    It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

    Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

    Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

  • Upgrading to Windows vista means itunes wont detect my ipod?? Help please.

    Recently upgraded to windows Vista. Big whopdeedo.
    But anyway, when I plug my ipod in, windows tries to update drivers for it, but of course failas horribly.
    However, this is having a knock on effect that means itunes wont detect my ipod. So, while my ipod recharges, I cannot sync it. Thus I can't add new songs and what-not.
    Please help.

    Yes my ipod is jailbroken, but this has never proved an issue before.
    Its not just itunes that now wont recognise my ipod, my other software wont either, and they used to work with the jailbroken ipod.
    This all started after i synced a nano, then connected my ipod and a screen came up saying ipod camera connected.
    I click on the camera icon in mycomputer and properties tab then selected take no action in the events tab.
    This hasnt resolved my issue, and the ipod still comes up as a camera in mycomputer, the only difference being im now not prompted to choose a program to view my photos with.
    This is really getting up my nose, as for the second poster, sorry that article was no help at all.
    Please someone help me

  • I have a dvd in my macbook and cannot eject it. the issue is it wont detect it. i cant find the dvd in finder. what do i do?

    i have a dvd in my macbook and cannot eject it. the issue is it wont detect it. i cant find the dvd in finder. what do i do?

    Dear Mary,
    Good Day...
    Restart the macBook holding down the mouse button of your trackpad.......
    Good Luck....
    Regards
    IK

  • WD Elements External Hard drive wont detect on my MBP anymore. HELP!!

    I was desperate to transfer my files from my WD external drive to my MBP but to no avail. So I searched online and found MacFuse and NTFS-3G. So I installed them both and after that, my WD Elements wont show anymore. It was working before prior to installing MacFuse & NTFS-3G. So I tried to remove them both but still the same problem. It wont detect my WD external drive anymore. The light on my WD drive is lighted up as usual but can't be found on Finder. I also tried to remove the WD external drive from my MBP and it recognises that my WD is there! Its says did not unmount correctly, something like that. I also tried to isolate the problem using another computer, this time, Windows and it works well.
    The Culprit of all this is when I install MacFue & NTFS-3G
    So I am stuck, any help would be highly appreciated.

    Remove MacFuse and NTFS3G. remove them correctly, get the directions from the vendor(s). Don't put it back
    Do you have any backups or are you winging it?

  • I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

    I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

    Is the display turned on? Sometimes it is the simplest of solutions, when details are missing.

  • I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

    i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

    http://support.apple.com/kb/TS1538

  • TS1363 itunes will not update on my computer and now wont detect my ipod. it says i have to contact an addministrator. what do i do?

    itunes will not update on my computer and now wont detect my ipod. it says i have to contact an addministrator. what do i do?

    Hi enp518,
    Welcome to Apple Support Communities.
    We have some information in this article that may be helpful:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visit support.microsoft.com for more information.
    Best,
    Jeremy

  • My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

    my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

    Place the device in DFU mode and restore.

  • 870A-G54 Wont Detect IDE

    Trying to boot up a brand new 870A and it wont detect my IDE CD drive. I've tried 2 different drives and still nothing. The sata HDD is fine.
    Any suggestions?

    Quote
    Trying to boot up a brand new 870A and it wont detect my IDE CD drive.
    Won't detect where?
    The IDE ports are controlled by a separate controller on this board, check under 'Integrated Peripherals' in BIOS setup, that 'Extra RAID/IDE controller' is [Enabled].

  • 27'  iMac wont detect Display

    Hey folks,
    I'm using the 27'' iMac Intel i5 and i have the following issue
    it wont detect my dell S2009Wb display, I bought the original adapter from apple from the mini display port to dvi.
    any suggestions? or experiences please help!
    thanks guys!

    Whew, I think I'd call Apple & ask to speak to customer relations, if what you say is true about the store/genii it sounds flat out wrong.
    Does it start & show anything if you hold Option or alt key at startup?
    How about the SHIFT key?
    Does it still boot from the Install Disc?

Maybe you are looking for

  • Shipment cost in Sales in billing document.

    hi gurus, I  have a scenario where Shipment Cost is to be calculated & then the same should carried to the billing doucment. do anybody have the step by step guide for Shipment Cost calculation  in Billing Document. Please mail me at [email protected

  • PDF from Keynote_Exit Slide object link error

    When I export Keynote presentation to PDF all the object hyperlinks work fine (Forward / Back / Specific Slide No) but the 'Exit Slideshow' object doesn't even though it appears as a hyperlink. Any thoughts much appreciated. Thanks very much. Mazinsk

  • When is Adobe going to overhaul 'import frames to layers' in PS?

    I think it's absolutely genius, but I dislike the setup of the window design. It's been the same for the longest. For the most part, everything is good, except when choosing the frames. I've had trouble choosing good areas to edit even with videos th

  • ICal/Outlook time issue.

    When I accept appointments generated from Outlook .ics files, iCal changes the time of the event in the reply email. How do I correct this? The date of the event in iCal is correct, it's only the confirmation to the event generator that is wrong.  I'

  • Known networks not recognizing

    Below is a post from Mac Rumors, but it discribes my problem perfectly.  BTW: Mac Rumors did not solve the problem on the thread located here: http://forums.macrumors.com/showthread.php?t=1408213 Every time I open my MacBook Pro it requires that I se