X-Fi Fatality not detecting front bay anymo

I own a X-Fi Fatality with the front bay. I never had any issues, but lately windows (Vista x64) seems unable to pick up my front bay. I always had it working properly, but now it's just not there. I don't see any connections in the audio panel anymore, whereas before I could see en select the different outputs. Connecting a mic or headphone or using the remote, none of this actually works anymore.
The front bay does recieve power though, since the red light of spdif actually shines.
It seems as if the card itself doesn't recieve the signal of the front bay that it is there or something. Anyway, right now it looks as if I only have a soundcard with no front bay installed. And yes, the cable conencting the two is still there.
I completely uninstalled all creative software en manually removed the card and the bay from the computer en rebooted. I reconnected everything and even took the ide cable on and off and reinstalled drivers and software. To no avail however, still no front bay.
Anyone got the same experience ever? Any solutions?

I also had this problem in the past.
The Frontbay was dead was my conclusion.
I tried another on the same soundcard which did work.
So try your frontbay on another Creative Audigy / X-Fi card and see for yourself.

Similar Messages

X-fi platinum not detect front pa

I?installed the x-fi properly!!!!But the front panel it doesnt work...whyyyyyy??When i go to start the entertainment center settings i take this message : Unable to find a working IR device"?Please Help!!!!!!!

You might be able to. If your amp has anolog inputs for the 5 speakers you can use the ports on the back and the digital/mic port for your mic.Most third party computer cases have an intel audio (ac '97) front panel connector so you'll have to buy an adaptor (http://www.performance-pcs.com/catal...oducts_id=2700?theres one) or splice it yourself. Then you can use the digital connection on the back for the amp and the front panel mic connection. I could never get my xfi to do digital 5. though. Not sure if that was me or the card. I have the Platinum.

Xi-Fi Fatality front bay not working on Vi

Hi all,
Can someone please confirm that with the current Vista BETA drivers for the Xi-Fi Fatality soundcard the front panel does not work yet ? (windows Vista Ultimate 32-bit)
I am testing my front headphone's and microphone but I get no sound there, these are also not selectable anywhere in eather the windows sound options or the (currently VERY limited) creative software.
Could I be doing something wrong ? or does realy the ONLY reason I took the Fatality version (the front panel) is not supported yet in any way by the BETA drivers ?
And please for gods sake, dont wait for microsoft to test the bloody drivers, just release them already , ill very happely click the "install anyway" button when windows tells me the drivers where not tested yet
Thank you,
Hans

My front bay works, but my remote doesn't appear to be working. I just bought the X-Fi Fatalty?3 weeks ago and installed it in my new 32-bit Vista Ultimate?system, so I don't have anything to baseline it against. ?Does the remote work with the current Vista drivers?Is it suppose to light up when you push the power button? (I already changed the batteries twice)?thx

NI Scope Sorf Front Panel will not detect NI PXI-5122

Hello,
I am trying to use NI Scope Soft Front Panel 2.7f0 to acquire simple waveforms;
however it will not detect my NI PXI-5122. I have confirmed that the digitizer
works under MAX 4.2.1 and can see waveforms under the test panel. I have
installed NI Scope 3.3.1 on my machine and have updated the driver on the PXI
to version 3.3.1. Any ideas on what is wrong?
~Buck

It is unclear from your post whether or not the 5122 is on the same physical device as you are running the soft front panel (SFP). The SFP only works on local devices. It does not have the capability to attach to RT or remote systems (MAX does). However, if you are running Windows on your PXI controller or are using MXI to control the chassis, there is another issue.
This account is no longer active. Contact ShadesOfGray for current posts and information.

*SOLVED* Device not detected/ No driver installed for X-FI Fatal

OK!!!! the only reason I signed up here was to post that I have (for me) solved my problem.
Before I get into details this occurred on a fresh system with latest drivers for hardware used.
The problem was installing my X-Fi card on my 680i m/b (striker extreme).. when I would install the driver it would simply crash the computer and when it started up the hardware was not detected to used the software and the device manager said no driver installed.. I tried everything.. I installed the driver in safe mode (yay it worked without crashing) then I booted for windows only to have it blue screen for a second and restart... repeating the cycle.. so i reinstalled windows again... I tried installing the driver different ways in windows.. nothing worked... I gave up...
BUT!!!
today while i was at work I decided I would try one last thing.
this is what got it going. I have SLI 8800ultras that covered the PCI slot on the bottom of my board and I though I would try the card in this slot to see if it worked there... so I disabled SLI took out my bottom card put in the sound card in the bottom slot, installed the driver... It installed 00% no crash... even better it worked after the restart!!!... so then I had to test if it worked in the top slot so I powered down, moved it up to my top PCI slot and windows auto set the driver for it (as it was already installed) It worked in the top slot now... Finally I put in the second 8800 to make sure it worked with this slot in use... It still worked fine with SLI enabled. because I was unhappy with the mess I made installing drivers all the time as I did with the many crashes I decided to do a fresh install of windows making this card work from the start so here is what you need to do if you have a 680i board with SLI. this is exactly what i did with my fresh install.
install only one GPU card..
Put the X-FI in a different slot that isn't giving you problems
Install windows
Install service pack 2
install your chipset drivers
install sound card drivers
power down, change sound card to permanent slot
test - power down
put in the second GPU card
install GPU drivers
Good luck you all having this problem.. I hope my solution helps you.
Bryan

I think I?got a similar?problem earlier today when I was messing around with?onboard audio?that I later removed and after unplugging a?USB headset.
Have you checked the device manager, is there any higlighted hardware that has a exclamation mark next to it.
I fixed the issue by simply uninstalling the WDM device with the exclamation mark and restarted.

X-Fi Fatality and Front Bay Digital

Right . . Just got my card today and kind of impressed so far. Have come over from an M-Audio Revolution 7. which is a software based card but still fantastic for music and a doddle to set up for digital out. I use a coaxial cable linked to a Denon 3805 amp. Now on this card, using a coaxial cable from the front bay, what speaker configuration should I use because so far I just cannot get music to sound as pure as on the M-Audio and it seems to have something to do with the bass and the Subwoofer, it just doesn't sound quite right. I have run through my amp settings, tried Music Cd's from a standalone CD player etc and the sound is fine.
Games seem to be ok. Maybe a hint of more detail with this card.
As I am using an external amp I have switched off all the DSP extras the X-Fi can do so the source is as pure as possible.
Hope someone else has this kind of setup and can shed some light.
Thanks in advance
Message Edited by comfysox on 09-25-2005 08:34 AM

Yes, that's the card I have.
And I don't get an option for DDL License Activation in my start menu, but I do have the DDL pack installed and I didn't need to activate it.
The reason that I asked about a decoding tab is that I've seen screenshots of other X-Fi control panel?tabs and they had a decoding tab.
Also, Creative support says in my earlier link?I should have a DDL icon in Entertainment Mode, which I don't have?
Thanks for the reply, I appreaciate it.

Audigy(1) Platinum PCI Not Detected By Installation CD In New Desk

Hello, I just updated to a new computer and pulled my Audigy Platinum SB0090 (with the front dri've panel) out of my old system and installed it in my new systemell E52 (AMD dual core)Windows XP SP23GB memory?) I disabled the onboard sound in the BIOS.2) Installed the Audigy Sound PCI card and dri've panel.3) Upon boot, Windows XP installs the Firewire and Gameport automatically. I tell it "no" when it prompts my to install audio device drivers.4) I try to install the current Audigy Platinum drivers from here, SBAX_WBUP2_LB_2_09_006, but it tells me no Audigy is detected and won't install.5)?I try to install the drivers from my original installation CD (PN: 220ML0003067) and am also?told that my?Audigy is not detected.6) The new PC has two PCI slots, 3 and 4. is PCIe6, 2 is PCIe. I've tried both PCI slots to no avail. The BIOS shows an audio device in whatever slot it is in. Partial Solution:7)? I went ahead a told Windows XP to search for drivers and it'sdid find?them on the original installation CD and installed them. I now have basic operations, but no dri've panel access. However, both installers above still cannot detect the Audigy. In Device Manager I now show:- Sound, video and game controllers-- Audio Codecs-- Creative Audigy Audio Processor (WDM)-- Creative Gameport-- Legacy Audio Drivers-- Legacy Video Capture Devices-- Media Control Devices-- Video Codecs?All of the above devices are working properly. Apparently I will not be able to easily get these installers to work. Is there a way I can manually?install the drivers neccessary to get current and full functionality of my Audigy and front dri've panel?Thanks

This is my view. It's all OK. It looks?if the Plug And Play function doesn't work. IRQ 0?Timer di sistema?OK
IRQ ?PS/2 Keyboard?OK
IRQ 4?Porta di comunicazione (COM)?OK
IRQ 6?Controller disco floppy standard?OK
IRQ 8?Orologio di sistema CMOS a tempo reale?OK
IRQ 9?Sistema compatibile ACPI Microsoft?OK
IRQ 9?SCSI/RAID Host Controller?OK
IRQ 3?Coprocessore matematico?OK
IRQ 5?Intel(R) ICH8 Family SMBus Controller - 283E?OK
IRQ 6?Intel(R) P965/G965 PCI Express Root Port - 29A?OK
IRQ 6?ASUS X950 SeriesOK
IRQ 6?Intel(R) ICH8 Family USB Uni'versal Host Controller - 2834?OK
IRQ 6?Intel(R) ICH8 Family PCI Express Root Port - 283F?OK
IRQ 7?Intel(R) ICH8 Family USB Uni'versal Host Controller - 2835?OK
IRQ 7?Intel(R) ICH8 Family PCI Express Root Port 6 - 2849?OK
IRQ 7?Generic Marvell Yukon Chipset based Ethernet Controller?OK
IRQ 8?Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A?OK
IRQ 8?Intel(R) ICH8 Family USB Uni'versal Host Controller - 2832?OK
IRQ 9?Intel(R) ICH8 Family USB Uni'versal Host Controller - 283?OK
IRQ 9?Intel(R) 8280HR/HH/HO SATA RAID Controller?OK
IRQ 2?Controller host Texas Instruments IEEE 394 compatibile OHCI?OK
IRQ 22?Creative Audigy Audio Processor (WDM)?OK
IRQ 23?Intel(R) ICH8 Family USB Uni'versal Host Controller - 2830?OK
IRQ 23?Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836?OK
IRQ 23?Controller host OHCI compatibile IEEE 394?OK
IRQ 23?Hauppauge WinTV-HVR 67xxx Capture Device?OK

Viewsonic VG2030wm not detected on DVI

Hello,
I got a MacBook Pro 13' and purchased at the same time a Mini DisplayPort to DVI Adapter to use with my ViewSonic VG2030wm. To my surprise, when I connected the monitor absolutely nothing happened, it goes completely undetected. The monitor works perfectly fine with a PC using an Nvidia 8600 through the DVI connector. I tried with both a single and dual link cable. I seem to be not the only one with this problem since I've found a few posts around but with no answers.
Later I exchanged the DVI adapter for a VGA one and the monitor worked fine but I would like to be able to use the DVI quality. I've asked twice at the Apple store and nobody has heard of such a problem. The monitor specs say it has a DVI-D (with HDCP) port.
Any ideas?
Thanks!
Hector

I had/have the same problem with a MacMini (with an Intel GMA 950), VG2030wm monitor and DVI cable. It worked fine with a VGA cable (but I had to use SwitchResX to pick the native 1680x1050 resolution).
I partially solved the problem (in Mac OS X 10.6) by unplugging both the MacMini and VG2030wm from the wall for 1-2 minutes (to reset the VG2030wm's settings?), and then resetting the MacMini's PRAM (by pressing and holding Command + Option + P + R while booting).
Unfortunately, I still have problems (black screen or native resolution not detected) when I restart o wake up the MacMini. The workaround I have found is to turn off the monitor (with the button on the front panel), wait a few seconds, and then turn it on again (and repeat) until the Mac Mini's picks up the monitor at 1680x1050 resolution.
I think there should be a way to force (instead of detecting) the EDID display information of the VG2030wm in Mac OS X by editing the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist, but I don't know how to do it (or if it's possible at all).
Hope it helps a little.
Regards,

How to manually install driver? Not detecting sound c

Hi,
My problem is when installing off the cd and off the downloaded driver it will not detect a creative product. I have li've! 5. with windows SP2. All I want to do is install the driver, doing it the windows search way does not work.
I want do MANUALLY do it, where are the sound card drivers located in windows so I can extract the files to there?
KX project makes my front speakers sound like rear so that is not a fix.

How to manually install drivers. Explore your installation CD or also the extracted creative downloaded web drivers (Use winrar to extract the exe file to your hard dri've)?Location of the "Creative Driver Update Utility"?X:\Audio\Drivers\?Double-click the file "Setup.exe"
Make sure "Driver Installation" box is checked and also check the box "Overwrite existing shared Creative audio driver files"?Click "OK"?This will take sometime to install the drivers. You'll be?asked to reboot?your computer. Thats it!
?Message Edited by freesky on 08-25-200705:20 AM

TRANSCEND JET FLASH 350 USB 2.O FLASH DRIVE NOT DETECTED

I AM HAVING DESK TOP PC P2 1401IL WITH WINDOWS 7
TOTAL 4 USB DRIVES ARE THERE. TWO FRONT TWO BACK
I PURCHASED A TRANSCEND JET FLASH 350 USB 2 FLASH DRIVE,WHEN THE DRIVE IS ATTACHED TO THE PORT
THE SYSTEM IS NOT DETECTING THE DRIVE.I TESTED THE SAME DRIVE ON OTHER PC WHERE IT WORKS
PROPERLY. PLEASE PROVIDE SOLUTION TO THIS ISSUE.

Hello YELMAR,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not able to install USB drivers for your desktop computer, and I would be happy to assist you in this matter!
Since the HP p2-1401il Desktop PC Drivers are only for Windows 8 and 8.1 on the website, I recommend following this document on usb device not recognized in windows 7. This should help in gaining access to your USB drive on your p2-1401il computer.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Setup could not detect any Sound Blaster Audigy card on your system

Hi from Barcelona!
I've a Soun Blaster Audigy card (Model: SB0090)
I tried to install the Audigy software and drivers from the original product CD but Setup was unable to find Augigy hardware and halted the installation!
"Setup could not detect any Sound Blaster card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this Setup program"
By the way. Manually the sound drivers can be installed working only front speakers of the 5. Creative system
I tried a clean installation of Windows XP and Windows 2000 PRO (reformatted the hard dri've) but Audigy install CD still could not find Audigy hardware.
I've changed the card to a different PCI slot with the same results!!! Damaged?
What is happening? I need a solution!! Many users have this problem to with other Sound Blaster cards and models...

ADSLNEW wrote:
It seems to be an important BUG of Creative Sound Blaster Audigy cards related with EEPROM!!!
Yes, indeed, that is my theory as well. After much ****hing and on-line research, it seems that this problem has been around since 2002. From Creative Labs point of view, it appears they view this as "pilot error" -- the user has installed the card in a system that is not fully compliant with the latest standards -- specifically Microsofts ACPI (configuration and power management). A wide variety of configurations and/or actions seem to cause the PCI subsystem ID in the Audigy EEPROM to be erroneously overwritten -- including certain older motherboards, certain older PCI cards, and perhaps other actions.
Once the subsystem ID in the EEPROM is overwritten and has garbage information, many or all of the Creative applications cease working and various sound problems can arise. Attempts to reinstall the driver or update to the latest driver consistently fail becuase of the dreaded "Setup could not detect any Sound Blaster Audigy card in your system..." error message.
There appear to be four fixes:
) Get a replacement Audigy card from Creative, but <EM>only</EM> after you perform their prescribed troubleshooting steps to prove that the card is indeed the source of the problem. Apparently, the steps include installing the card in another PC. Apparently, Creative in Europe is more willing to replace your card than Creative in the US. It's up to Creative Labs whether or not they issue you an RMA ("Return Material Authorization").
However, this fix will fail if the root causes of the EEPROM error are not corrected. Apparently, Creative Tech Support isn't always a foolproof source of guidance, so the burden is on you. The root cause MUST be corrected before the new card is installed, or the same problem will happen all over again. Eliminating the root cause may involve replacing your motherboard, replacing other PCI cards, or manual configuration (disabling ACPI).
2) Reprogramming the EEPROM. This is for advanced PC owners only, because it involves desoldering the EEPROM, programming it, and resoldering (and even lifting some pins to prevent reprogramming). There are instructions on how to do this posted in the German Creative Labs discussion board, by a Russian (!). I have links for those who are interested.
3) Removing the Creative drivers and software (using Clean Sweep procedures and third party utilities), updating again using Windows XP SP2, then physically moving the card to different PCI slots (multiple times if necessary), until ACPI Bios writes the proper information into the EEPROM. You can then reload the drivers.
Again, the root causes of the problem must be removed or your fix will only be temporary (a day or two). This solution also seems to be very dependent on the specifics of your system (motherboard, PCI cards, etc.).
4) Some people have had success in by-passing the step in the driver installation process where they check for the Audigy card subsystem ID, using a utility called CTZAPxx on the installation CD. Then then manually install each of the applications they need to use.
5) Use the open source driver from the kX Project (http://kxproject.lugosoft.com/index.php). This driver (and associated utilities) does not depend on the detailed configuration of the card (i.e. they don't check subsystem ID) and appear to work fine even with cards with corrupted EEPROM.
This driver is aimed primarily at computer music applications, and opens up the on-card signal processing capabilities. The downside is that the Audigy 2 ZS does not have all of it's capabilities supported <EM>yet </EM>(e.g. Dolby Digital decoding, S/PIF passthrough, possibly some game sound features, THX, 24-bit recording, support for Hyperthreading CPUs, etc.). But scanning over the discussion boards, the user community seems to be MUCH happier with the performance and support associated with these drivers than with Creative's.
This is the direction I'm going. I'm not a big gamer and I don't really care about the latest in home theater audio performance. Basic 5. surround sound is all I care about, and I'm much more interested in computer music capabilities.
I have also lost faith in Creative Labs as a vendor to provide the support I want and need going forward. Just imagine if the Creative Labs were running the Space Shuttle program :smileysurprised:.

Dv9810us after recovery windows will not detect the wireless card that is bulit into the computer.

After running the recovery (Vista 32) from the recovery partition my computer no longer sees the Wifi card installed.
There is nothing in device manager, the hp wireless wizard doesn't detect anything. I went to HP's site and download the 3 different wifi drivers that it would be and installed them. I can not rememeber what the adapter was.,. thats a problem.
This system was a refurbed unit when I bought it, if the salesman was correct it was recalled because of a faulty Wireless card. I wonder if they replaced the card with one that the restore partition installation could not detect.
Any ideas?

first make sure the wifi is turned on either by a switch located on the front of keyboard or a soft touch icon near the display.. if you have the soft touch make sure it's blue in color if its orange its turned off

Presario C751NR Microphone jack not detected, internal Mic works OK

I made sure that I have the most current Conexant audio driver installed: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-64867-1&lc=en&dlc=en&cc=us〈=en&os=2093&product=3646600 When I plug a microphone into the microphone jack on the front, the driver does not detect the change and maintains a connection to the microphone built in to the display lid. Going in to the control panel and looking at the microphone's "Jack Information" indicator dot when an external microphone is plugged in shows it staying black. Does anyone have any ideas? It has always been like that, but I would like to be able to use the microphone jack. System is running Vista Home Premium (32 Bit) with SP2 and all current system updates.

Welcome to Apple Support Communities
It's possible your premier pro is confusing it, does it work without that connected ?
Plantronics claim that device is OSX compatible and doesn't need any drivers (even though the mode is discontinued)
http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/stdadp.php?p_faqid=8781&pcreated=1160070215
If you run Utilities/Audio MIDI Setup does that recognise the device ?

HP dv4t not detecting hard drive, please help!

Hello, its been just a little over a year since I've bought my HP dvt, and of course the problems start as soon as my warranty has ended.. It's been working fairly fine most of the year, and then just all of a sudden while not even doing anything of importance on computer last week I got a blue screen error..
Ever since then I have had so much problems. At first it just started out with closing the screen and reopening it crashed the laptop in a couple minutes..
The main problem now is, it just does not detect the hard drive when booting up! Sometimes (rarely) it does though.. I thought it was a windows problem, so I did fresh clean install of Windows 7 and reformatted the hard drive. Then I ran CHKDSK and it did it stuff and said volume clean at the end.. It worked perfectly for a couple of hours, was able to close screen and open with no problems. I downloaded "Hard drive sentinel" to monitor my hdd health, and it said 90% which is apparently excellent. Yet as I was installing adobe reader, it crashed, got the blue screen of death and has not been able to boot up since
Can anyone tell what is the problem with it? Anyone else have similar problem? I've tried to reformat again with CD but it doesnt even recognize any drive to install on..
Important thing to note is that, in the BIOS screen when i run the HARD DISK TEST, it does recognize it! So i dont understand why it doesn't load the operating system or cant see the hard drive anywhere else!!
What is at fault even? Is the motherboard dead? Althought the bios screen loads fine so does that mean its OK? Is it the hard drive? CHKDSK and the hdd health monitor thing said it was ok right before the crashes..
Please help, I have my first computer science lab in like 2 days with my laptop breaking just a couple days before it with barely any money left to buy a new laptop

"computer always freezes at 56%"
Time to replace your Hard Drive. BACK UP NOW!!!
This will be the 3rd HD in a new HP HDX 18 for me (6 months old).
Open up the HD bay and take a look at the model of the HD.
If it is a SEAGATE MOMENTUS 7200.4 they are known to fail in as little as 1 month from install, and do not last more than 6 months.
Google the brand and you will see that most people are reccomending that you remove the SEAGATE product ASAP (data recovery is next to impossible) and replace it with something else.
I had just finished setting up the PC as I wanted it, OS, programs / Bios, software upgrades, then without warning the 2nd HD went.
I lost EVERYTHING in my C drive, was just preparing to do a full BU and Mirror Image after deleting both from my D and External Drive.
HP is replacing one piece of crap with another, I will be shopping for a different brand for the C drive after the laptop comes back from repair.
There seems to be no end to this BS with SEAGATE drives.
DO A FULL BU NOW!!!
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

Arch does not detect /dev/sdb

HI everybody,
Like the title says, Arch does not detect a second SATA hard drive I have installed on my computer.
I've searched around Google and the forums and I've doesn't found any helpfull tip.
The Arch installation is fresh, I just made it tonight, and cfdisk (during the installation) had recogniced the drive.
I've posted this here because I'm new on Arch, coming from Ubuntu and Fedora distros and I feel like a real Newbie
Here's some outputs that may be useful:
sudo fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes, 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificador del disco: 0x8370a3d6
Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 1435379711 717586432 7 HPFS/NTFS/exFAT
/dev/sda3 1435379712 1953525167 259072728 5 Extendida
/dev/sda5 1435379775 1437339641 979933+ 82 Linux swap / Solaris
/dev/sda6 * 1437339705 1827960116 195310206 83 Linux
/dev/sda7 1827960180 1953525167 62782494 83 Linux
ls -lat /dev/sd*
brw-rw---- 1 root disk 8, 2 feb 3 03:32 /dev/sda2
brw-rw---- 1 root disk 8, 7 feb 3 03:32 /dev/sda7
brw-rw---- 1 root disk 8, 5 feb 3 03:32 /dev/sda5
brw-rw---- 1 root disk 8, 6 feb 3 03:32 /dev/sda6
brw-rw---- 1 root disk 8, 1 feb 3 03:32 /dev/sda1
brw-rw---- 1 root disk 8, 3 feb 3 03:32 /dev/sda3
brw-rw---- 1 root disk 8, 0 feb 3 03:32 /dev/sda
lspci -k
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Intel Corporation Device 0036
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
Kernel driver in use: pcieport
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: mei
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ata_generic
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
Subsystem: Intel Corporation Device 0037
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: snd_hda_intel
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: lpc_ich
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
Subsystem: Intel Corporation Device 0036
Kernel driver in use: pata_acpi
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
Subsystem: Device 196e:0898
Kernel driver in use: snd_hda_intel
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Intel Corporation Device 8086
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
Thanks for the help!

I had the drive connected to a eSATA port, but I pluged it to a ordinary SATA port, and the result is the same.
The configuration on the BIOS:
ATA/IDE Mode -> Native
Configure Storage as -> IDE
It doesn't show more valuable information except for the location of any drive on any SATA port.
dmesg output, it can be useful for someone:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df451fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df452000-0x00000000df494fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df495000-0x00000000df508fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df509000-0x00000000df50afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df50b000-0x00000000df610fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df611000-0x00000000df611fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df612000-0x00000000df612fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df613000-0x00000000df61afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61b000-0x00000000df61bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df61c000-0x00000000df61dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df61e000-0x00000000df625fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df626000-0x00000000df646fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df647000-0x00000000df689fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df68a000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: /DH55HC, BIOS TCIBX10H.86A.0048.2011.1206.1342 12/06/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 1FC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 21C000000 mask FFC000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
[ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1fbffffff @ [mem 0xdf7fb000-0xdf7fffff]
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21bffffff @ [mem 0x1fbffe000-0x1fbffffff]
[ 0.000000] RAMDISK: [mem 0x37a76000-0x37d32fff]
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000df61ce18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000df61ad98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120913/tbfadt-394)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0xDF61BF40/0x00000000DF61BE40, using 32 (20120913/tbfadt-521)
[ 0.000000] ACPI: DSDT 00000000df613018 06B90 (v01 INTEL DH55HC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000df61bf40 00040
[ 0.000000] ACPI: APIC 00000000df61af18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000df61ac18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000df61df18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000df61de98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000df61cc18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21bffffff]
[ 0.000000] NODE_DATA [mem 0x21bffc000-0x21bffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xdf451fff]
[ 0.000000] node 0: [mem 0xdf509000-0xdf50afff]
[ 0.000000] node 0: [mem 0xdf611000-0xdf611fff]
[ 0.000000] node 0: [mem 0xdf68a000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x21bffffff]
[ 0.000000] On node 0 totalpages: 2061655
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 894475 pages, LIFO batch:31
[ 0.000000] Normal zone: 18176 pages used for memmap
[ 0.000000] Normal zone: 1128704 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000df452000 - 00000000df495000
[ 0.000000] PM: Registered nosave memory: 00000000df495000 - 00000000df509000
[ 0.000000] PM: Registered nosave memory: 00000000df50b000 - 00000000df611000
[ 0.000000] PM: Registered nosave memory: 00000000df612000 - 00000000df613000
[ 0.000000] PM: Registered nosave memory: 00000000df613000 - 00000000df61b000
[ 0.000000] PM: Registered nosave memory: 00000000df61b000 - 00000000df61c000
[ 0.000000] PM: Registered nosave memory: 00000000df61c000 - 00000000df61e000
[ 0.000000] PM: Registered nosave memory: 00000000df61e000 - 00000000df626000
[ 0.000000] PM: Registered nosave memory: 00000000df626000 - 00000000df647000
[ 0.000000] PM: Registered nosave memory: 00000000df647000 - 00000000df68a000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[ 0.000000] e820: [mem 0xe4000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021bc00000 s84608 r8192 d21888 u131072
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027089
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d40a9225-bd6b-46b0-9e14-54b177499391 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8033416k/8847360k available (4883k kernel code, 600740k absent, 213204k reserved, 4030k data, 812k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3324.877 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6652.82 BogoMIPS (lpj=11082923)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000044] AppArmor: AppArmor disabled by boot time parameter
[ 0.000483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002616] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003590] Mount-cache hash table entries: 256
[ 0.003783] Initializing cgroup subsys cpuacct
[ 0.003786] Initializing cgroup subsys memory
[ 0.003793] Initializing cgroup subsys devices
[ 0.003794] Initializing cgroup subsys freezer
[ 0.003796] Initializing cgroup subsys net_cls
[ 0.003797] Initializing cgroup subsys blkio
[ 0.003818] CPU: Physical Processor ID: 0
[ 0.003819] CPU: Processor Core ID: 0
[ 0.003824] mce: CPU supports 9 MCE banks
[ 0.003833] CPU0: Thermal monitoring enabled (TM1)
[ 0.003840] process: using mwait in idle threads
[ 0.003844] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003958] Freeing SMP alternatives: 16k freed
[ 0.004816] ACPI: Core revision 20120913
[ 0.007720] ftrace: allocating 18793 entries in 74 pages
[ 0.015109] Switched APIC routing to physical flat.
[ 0.015602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048500] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
[ 0.154172] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.154177] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.154178] ... version: 3
[ 0.154179] ... bit width: 48
[ 0.154180] ... generic registers: 4
[ 0.154181] ... value mask: 0000ffffffffffff
[ 0.154182] ... max period: 000000007fffffff
[ 0.154182] ... fixed-purpose events: 3
[ 0.154183] ... event mask: 000000070000000f
[ 0.190806] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.177468] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.227213] Brought up 4 CPUs
[ 0.227218] smpboot: Total of 4 processors activated (26609.30 BogoMIPS)
[ 0.229378] devtmpfs: initialized
[ 0.230458] PM: Registering ACPI NVS region [mem 0xdf452000-0xdf494fff] (274432 bytes)
[ 0.230462] PM: Registering ACPI NVS region [mem 0xdf612000-0xdf612fff] (4096 bytes)
[ 0.230463] PM: Registering ACPI NVS region [mem 0xdf61b000-0xdf61bfff] (4096 bytes)
[ 0.230464] PM: Registering ACPI NVS region [mem 0xdf61e000-0xdf625fff] (32768 bytes)
[ 0.230466] PM: Registering ACPI NVS region [mem 0xdf647000-0xdf689fff] (274432 bytes)
[ 0.231092] RTC time: 21:05:23, date: 02/03/13
[ 0.231127] NET: Registered protocol family 16
[ 0.231227] ACPI: bus type pci registered
[ 0.231289] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.231291] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.236542] PCI: Using configuration type 1 for base access
[ 0.236958] bio: create slab <bio-0> at 0
[ 0.237003] ACPI: Added _OSI(Module Device)
[ 0.237005] ACPI: Added _OSI(Processor Device)
[ 0.237006] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.237007] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237812] ACPI: EC: Look up EC in DSDT
[ 0.238684] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240605] ACPI: SSDT 00000000df612c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240820] ACPI: Dynamic OEM Table Load:
[ 0.240821] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.240837] ACPI BIOS Bug: Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20120913/tbutils-324)
[ 0.240840] ACPI: SSDT 00000000df61bd18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241020] ACPI: Dynamic OEM Table Load:
[ 0.241021] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.241360] ACPI: Interpreter enabled
[ 0.241363] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.241374] ACPI: Using IOAPIC for interrupt routing
[ 0.241528] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.244856] ACPI: No dock devices found.
[ 0.244859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244985] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.245005] PCI host bridge to bus 0000:00
[ 0.245007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.245009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.245010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.245011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.245012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.245019] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.245033] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.245049] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[ 0.245073] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.245118] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.245149] pci 0000:00:16.0: reg 10: [mem 0xfa129000-0xfa12900f 64bit]
[ 0.245261] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.245285] pci 0000:00:16.2: [8086:3b66] type 00 class 0x010185
[ 0.245304] pci 0000:00:16.2: reg 10: [io 0xf150-0xf157]
[ 0.245314] pci 0000:00:16.2: reg 14: [io 0xf140-0xf143]
[ 0.245323] pci 0000:00:16.2: reg 18: [io 0xf130-0xf137]
[ 0.245334] pci 0000:00:16.2: reg 1c: [io 0xf120-0xf123]
[ 0.245346] pci 0000:00:16.2: reg 20: [io 0xf110-0xf11f]
[ 0.245430] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.245452] pci 0000:00:16.3: reg 10: [io 0xf100-0xf107]
[ 0.245463] pci 0000:00:16.3: reg 14: [mem 0xfa128000-0xfa128fff]
[ 0.245580] pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
[ 0.245601] pci 0000:00:19.0: reg 10: [mem 0xfa100000-0xfa11ffff]
[ 0.245610] pci 0000:00:19.0: reg 14: [mem 0xfa127000-0xfa127fff]
[ 0.245620] pci 0000:00:19.0: reg 18: [io 0xf020-0xf03f]
[ 0.245697] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.245723] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.245745] pci 0000:00:1a.0: reg 10: [mem 0xfa126000-0xfa1263ff]
[ 0.245840] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.245870] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.245887] pci 0000:00:1b.0: reg 10: [mem 0xfa120000-0xfa123fff 64bit]
[ 0.245970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.246001] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.246022] pci 0000:00:1d.0: reg 10: [mem 0xfa125000-0xfa1253ff]
[ 0.246117] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.246141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.246216] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[ 0.246328] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.246347] pci 0000:00:1f.2: reg 10: [io 0xf0f0-0xf0f7]
[ 0.246357] pci 0000:00:1f.2: reg 14: [io 0xf0e0-0xf0e3]
[ 0.246366] pci 0000:00:1f.2: reg 18: [io 0xf0d0-0xf0d7]
[ 0.246376] pci 0000:00:1f.2: reg 1c: [io 0xf0c0-0xf0c3]
[ 0.246386] pci 0000:00:1f.2: reg 20: [io 0xf0b0-0xf0bf]
[ 0.246395] pci 0000:00:1f.2: reg 24: [io 0xf0a0-0xf0af]
[ 0.246454] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.246472] pci 0000:00:1f.3: reg 10: [mem 0xfa124000-0xfa1240ff 64bit]
[ 0.246498] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.246538] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.246557] pci 0000:00:1f.5: reg 10: [io 0xf090-0xf097]
[ 0.246567] pci 0000:00:1f.5: reg 14: [io 0xf080-0xf083]
[ 0.246576] pci 0000:00:1f.5: reg 18: [io 0xf070-0xf077]
[ 0.246586] pci 0000:00:1f.5: reg 1c: [io 0xf060-0xf063]
[ 0.246595] pci 0000:00:1f.5: reg 20: [io 0xf050-0xf05f]
[ 0.246605] pci 0000:00:1f.5: reg 24: [io 0xf040-0xf04f]
[ 0.246682] pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
[ 0.246690] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.246698] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.246706] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.246711] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.246717] pci 0000:01:00.0: reg 30: [mem 0xfa000000-0xfa07ffff pref]
[ 0.246758] pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.246765] pci 0000:01:00.1: reg 10: [mem 0xfa080000-0xfa083fff]
[ 0.246835] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.246838] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.246839] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.246842] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.246904] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.246915] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.246916] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.246917] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246919] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.246929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.247023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.247107] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.247197] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.247198] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.250341] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250370] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250397] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250425] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.250454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.250484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.250511] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.250542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.250605] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.250606] vgaarb: loaded
[ 0.250607] vgaarb: bridge control possible 0000:01:00.0
[ 0.250627] PCI: Using ACPI for IRQ routing
[ 0.252814] PCI: Discovered peer bus 3f
[ 0.252815] PCI: root bus 3f: using default resources
[ 0.252815] PCI: Probing PCI hardware (bus 3f)
[ 0.252831] PCI host bridge to bus 0000:3f
[ 0.252833] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.252834] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.252836] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.252840] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[ 0.252855] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[ 0.252869] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[ 0.252882] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[ 0.252894] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[ 0.252906] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[ 0.252926] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.253005] PCI: pci_cache_line_size set to 64 bytes
[ 0.253052] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.253053] e820: reserve RAM buffer [mem 0xdf452000-0xdfffffff]
[ 0.253055] e820: reserve RAM buffer [mem 0xdf50b000-0xdfffffff]
[ 0.253056] e820: reserve RAM buffer [mem 0xdf612000-0xdfffffff]
[ 0.253058] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.253125] NetLabel: Initializing
[ 0.253126] NetLabel: domain hash size = 128
[ 0.253127] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.253137] NetLabel: unlabeled traffic allowed by default
[ 0.253153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.253157] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.255164] Switching to clocksource hpet
[ 0.258533] pnp: PnP ACPI init
[ 0.258548] ACPI: bus type pnp registered
[ 0.258610] pnp 00:00: [bus 00-ff]
[ 0.258612] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.258614] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.258615] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.258616] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.258618] pnp 00:00: [mem 0x00000000 window]
[ 0.258619] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[ 0.258649] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.258677] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.258678] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.258680] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.258681] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.258682] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.258714] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.258716] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.258717] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.258719] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.258720] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.258723] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.258812] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258814] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.258834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.258995] pnp 00:03: [io 0x03f8-0x03ff]
[ 0.259007] pnp 00:03: [irq 4]
[ 0.259008] pnp 00:03: [dma 0 disabled]
[ 0.259046] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.259277] pnp 00:04: [io 0x0378-0x037f]
[ 0.259279] pnp 00:04: [io 0x0778-0x077f]
[ 0.259283] pnp 00:04: [irq 5]
[ 0.259284] pnp 00:04: [dma 3]
[ 0.259381] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.259389] pnp 00:05: [dma 4]
[ 0.259390] pnp 00:05: [io 0x0000-0x000f]
[ 0.259391] pnp 00:05: [io 0x0081-0x0083]
[ 0.259392] pnp 00:05: [io 0x0087]
[ 0.259394] pnp 00:05: [io 0x0089-0x008b]
[ 0.259395] pnp 00:05: [io 0x008f]
[ 0.259396] pnp 00:05: [io 0x00c0-0x00df]
[ 0.259407] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.259413] pnp 00:06: [io 0x0070-0x0071]
[ 0.259418] pnp 00:06: [irq 8]
[ 0.259431] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.259437] pnp 00:07: [io 0x0061]
[ 0.259449] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.259459] pnp 00:08: [io 0x0010-0x001f]
[ 0.259460] pnp 00:08: [io 0x0022-0x003f]
[ 0.259462] pnp 00:08: [io 0x0044-0x005f]
[ 0.259463] pnp 00:08: [io 0x0062-0x0063]
[ 0.259464] pnp 00:08: [io 0x0065-0x006f]
[ 0.259465] pnp 00:08: [io 0x0072-0x007f]
[ 0.259466] pnp 00:08: [io 0x0080]
[ 0.259467] pnp 00:08: [io 0x0084-0x0086]
[ 0.259468] pnp 00:08: [io 0x0088]
[ 0.259469] pnp 00:08: [io 0x008c-0x008e]
[ 0.259471] pnp 00:08: [io 0x0090-0x009f]
[ 0.259472] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.259473] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.259474] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.259500] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.259503] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259508] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.259513] pnp 00:09: [irq 13]
[ 0.259526] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.259621] pnp 00:0a: [io 0x0400-0x047f]
[ 0.259622] pnp 00:0a: [io 0x1180-0x119f]
[ 0.259623] pnp 00:0a: [io 0x0500-0x057f]
[ 0.259625] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.259626] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.259627] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.259628] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.259648] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.259650] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.259651] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.259653] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.259654] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.259656] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.259658] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.259660] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.259783] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.259800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.259892] pnp: PnP ACPI: found 12 devices
[ 0.259893] ACPI: ACPI bus type pnp unregistered
[ 0.266408] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.266411] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.266413] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.266415] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266418] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.266444] pci 0000:00:1e.0: setting latency timer to 64
[ 0.266448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.266449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.266450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266452] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266453] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.266454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfa0fffff]
[ 0.266456] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.266457] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.266459] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.266460] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.266461] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.266463] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.266464] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.266492] NET: Registered protocol family 2
[ 0.266910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.268783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.269029] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.269063] TCP: reno registered
[ 0.269073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.269211] NET: Registered protocol family 1
[ 0.315053] pci 0000:01:00.0: Boot video device
[ 0.315082] PCI: CLS 64 bytes, default 64
[ 0.315125] Unpacking initramfs...
[ 0.353156] Freeing initrd memory: 2804k freed
[ 0.353546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.353549] software IO TLB [mem 0xdb452000-0xdf451fff] (64MB) mapped at [ffff8800db452000-ffff8800df451fff]
[ 0.353859] audit: initializing netlink socket (disabled)
[ 0.353875] type=2000 audit(1359925523.249:1): initialized
[ 0.363018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.364275] VFS: Disk quotas dquot_6.5.2
[ 0.364309] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.364442] msgmni has been set to 15695
[ 0.364641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.364676] io scheduler noop registered
[ 0.364678] io scheduler deadline registered
[ 0.364713] io scheduler cfq registered (default)
[ 0.364792] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.364908] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.364910] vesafb: scrolling: redraw
[ 0.364911] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.365255] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005600000, using 4032k, total 4032k
[ 0.452482] Console: switching to colour frame buffer device 160x50
[ 0.539642] fb0: VESA VGA frame buffer device
[ 0.539651] intel_idle: MWAIT substates: 0x1120
[ 0.539652] intel_idle: v0.4 model 0x25
[ 0.539653] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.539700] GHES: HEST is not enabled!
[ 0.539744] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.560441] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.581146] 0000:00:16.3: ttyS1 at I/O 0xf100 (irq = 17) is a 16550A
[ 0.581313] Linux agpgart interface v0.103
[ 0.581361] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.594604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.594626] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.594726] mousedev: PS/2 mouse device common for all mice
[ 0.594777] rtc_cmos 00:06: RTC can wake from S4
[ 0.594939] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.594973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.595018] cpuidle: using governor ladder
[ 0.595079] cpuidle: using governor menu
[ 0.595112] drop_monitor: Initializing network drop monitor service
[ 0.595172] TCP: cubic registered
[ 0.595242] NET: Registered protocol family 10
[ 0.595362] NET: Registered protocol family 17
[ 0.595369] Key type dns_resolver registered
[ 0.595570] PM: Hibernation image not present or could not be loaded.
[ 0.595576] registered taskstats version 1
[ 0.596120] Magic number: 1:939:94
[ 0.596267] rtc_cmos 00:06: setting system clock to 2013-02-03 21:05:24 UTC (1359925524)
[ 0.597300] Freeing unused kernel memory: 812k freed
[ 0.597412] Write protecting the kernel read-only data: 8192k
[ 0.599884] Freeing unused kernel memory: 1248k freed
[ 0.601056] Freeing unused kernel memory: 476k freed
[ 0.606451] systemd-udevd[57]: starting version 197
[ 0.624469] SCSI subsystem initialized
[ 0.625159] ACPI: bus type usb registered
[ 0.625179] usbcore: registered new interface driver usbfs
[ 0.625187] usbcore: registered new interface driver hub
[ 0.625823] ACPI: bus type scsi registered
[ 0.625865] usbcore: registered new device driver usb
[ 0.625875] libata version 3.00 loaded.
[ 0.626068] pata_acpi 0000:00:16.2: setting latency timer to 64
[ 0.626104] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 0.626423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.627806] scsi0 : pata_acpi
[ 0.628229] scsi1 : pata_acpi
[ 0.628555] ata1: PATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19
[ 0.628557] ata2: PATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19
[ 0.628587] pata_acpi 0000:00:1f.5: setting latency timer to 64
[ 0.633159] scsi2 : pata_acpi
[ 0.633673] scsi3 : pata_acpi
[ 0.634669] ata3: PATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19
[ 0.634672] ata4: PATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19
[ 0.634727] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.634732] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.634739] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.634756] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.638765] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.638798] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfa126000
[ 0.647329] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.647467] hub 1-0:1.0: USB hub found
[ 0.647471] hub 1-0:1.0: 2 ports detected
[ 0.647542] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.647545] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.647549] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.647560] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.651548] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.651561] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfa125000
[ 0.660694] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.660928] hub 2-0:1.0: USB hub found
[ 0.660932] hub 2-0:1.0: 2 ports detected
[ 0.801747] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 0.801750] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.802139] ata1.01: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[ 0.802144] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.803079] ata1.01: no PIO support
[ 0.953074] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.076944] hub 1-1:1.0: USB hub found
[ 1.077141] hub 1-1:1.0: 6 ports detected
[ 1.182336] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.306076] hub 2-1:1.0: USB hub found
[ 1.306284] hub 2-1:1.0: 8 ports detected
[ 1.351793] tsc: Refined TSC clocksource calibration: 3325.000 MHz
[ 1.351799] Switching to clocksource tsc
[ 1.385166] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 1.541306] usb 1-1.4: new low-speed USB device number 4 using ehci_hcd
[ 5.935629] ata1.01: no PIO support
[ 5.935631] ata1.01: disabled
[ 5.951315] ata1.00: configured for UDMA/100
[ 5.951734] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 6.120495] ata2.01: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[ 6.120503] ata2.01: no PIO support
[ 11.257635] ata2.01: no PIO support
[ 11.257639] ata2.01: disabled
[ 11.421879] ata_generic 0000:00:16.2: setting latency timer to 64
[ 11.422293] scsi4 : ata_generic
[ 11.422400] scsi5 : ata_generic
[ 11.422428] ata5: PATA max UDMA/100 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 18
[ 11.422430] ata6: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 18
[ 11.751474] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 11.751521] sd 0:0:0:0: [sda] Write Protect is off
[ 11.751523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.751538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.775078] usbcore: registered new interface driver usbhid
[ 11.775081] usbhid: USB HID core driver
[ 11.812772] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 11.813929] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.814854] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
[ 11.814908] hid-generic 0003:046D:C31B.0002: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input0
[ 11.815047] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[ 11.815422] microsoft 0003:045E:076C.0001: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1a.0-1.2/input0
[ 11.817407] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input2
[ 11.817457] hid-generic 0003:046D:C31B.0003: input,hidraw2: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4/input1
[ 12.388733] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 12.938667] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 12.961471] systemd[1]: Set hostname to <archlinuxPC>.
[ 13.159056] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 13.159185] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 13.159221] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.159230] systemd[1]: Starting Remote File Systems.
[ 13.159238] systemd[1]: Reached target Remote File Systems.
[ 13.159244] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 13.159250] systemd[1]: Starting Delayed Shutdown Socket.
[ 13.159271] systemd[1]: Listening on Delayed Shutdown Socket.
[ 13.159277] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 13.159292] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.159298] systemd[1]: Starting Encrypted Volumes.
[ 13.159306] systemd[1]: Reached target Encrypted Volumes.
[ 13.159313] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 13.159334] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.159356] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 13.159431] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.159472] systemd[1]: Starting udev Kernel Socket.
[ 13.159488] systemd[1]: Listening on udev Kernel Socket.
[ 13.159519] systemd[1]: Starting udev Control Socket.
[ 13.159537] systemd[1]: Listening on udev Control Socket.
[ 13.159543] systemd[1]: Starting Swap.
[ 13.159550] systemd[1]: Reached target Swap.
[ 13.159556] systemd[1]: Starting Journal Socket.
[ 13.159589] systemd[1]: Listening on Journal Socket.
[ 13.159600] systemd[1]: Started File System Check on Root Device.
[ 13.159605] systemd[1]: Mounting Temporary Directory...
[ 13.191259] systemd[1]: Mounting Huge Pages File System...
[ 13.194730] systemd[1]: Starting udev Coldplug all Devices...
[ 13.214643] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.231452] systemd[1]: Starting Apply Kernel Variables...
[ 13.240935] systemd[1]: Starting Setup Virtual Console...
[ 13.252572] systemd[1]: Started Load Kernel Modules.
[ 13.252592] systemd[1]: Mounted FUSE Control File System.
[ 13.252605] systemd[1]: Mounting Debug File System...
[ 13.254667] systemd[1]: Mounting Configuration File System...
[ 13.274425] systemd[1]: Starting udev Kernel Device Manager...
[ 13.305170] systemd[1]: Started Set Up Additional Binary Formats.
[ 13.305183] systemd[1]: Starting Journal Service...
[ 13.307733] systemd[1]: Started Journal Service.
[ 13.307763] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.726755] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 13.750053] systemd-udevd[127]: starting version 197
[ 13.921301] systemd-journald[128]: Received SIGUSR1
[ 14.418021] systemd-journald[128]: File /var/log/journal/9dcd8569a2b14c4f9f53ce4406e57e79/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 14.792337] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 14.877515] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 14.893383] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 14.893385] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 14.953180] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.951986] ACPI: Invalid Power Resource to register!
[ 14.953337] parport0: PC-style at 0x378
[ 14.953338] (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 15.027758] ppdev: user-space parallel port driver
[ 15.059527] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x3
[ 15.068458] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x3
[ 15.068852] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x3
[ 15.069229] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x3
[ 15.069558] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 15.124825] ACPI: Requesting acpi_cpufreq
[ 15.127274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 15.127327] ACPI: Power Button [PWRB]
[ 15.127369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 15.127425] ACPI: Power Button [PWRF]
[ 15.131162] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 15.139560] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.139628] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.139728] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.139785] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.139838] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.140068] hda_intel: Disabling MSI
[ 15.140077] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 15.140087] e1000e 0000:00:19.0: setting latency timer to 64
[ 15.140156] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 15.140194] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.310985] nvidia: module license 'NVIDIA' taints kernel.
[ 15.310990] Disabling lock debugging due to kernel taint
[ 15.335816] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:a2:d5:75
[ 15.335819] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 15.335893] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
[ 15.335992] mei 0000:00:16.0: setting latency timer to 64
[ 15.336076] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 15.336761] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.AY34 1 (20120913/utaddress-251)
[ 15.336765] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.342893] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 15.384478] iTCO_vendor_support: vendor-support=0
[ 15.392227] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.392289] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
[ 15.392384] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.468027] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570266] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.570395] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.762514] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 16.022159] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 16.022316] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 16.022456] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 16.022589] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 16.023047] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.023288] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.18 Wed Jan 9 17:02:09 PST 2013
[ 18.372541] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
[ 18.372591] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.993202] NVRM: Your system is not currently configured to drive a VGA console
[ 34.993205] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 34.993206] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 34.993207] NVRM: drivers including, but not limited to, vesafb, may result in
[ 34.993208] NVRM: corruption and stability problems, and is not supported.
[ 44.447627] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
[ 98.242223] fuse init (API version 7.20)
Thanks everyone for every reply, I'm learning more GNU/Linux in two days than in two years as other Linux distro's user.

X-Fi Fatality not detecting front bay anymo

Similar Messages

Maybe you are looking for