X-Fi Fatality on a Thomson DPL 80 HT 5.1 System. How to get more as 2 speakers wo

Hi,
I have bought me the X-Fi Fatality.
My Surrond Device is the Thomson DPL 80 HT 5..
Look here for pictures:
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=7596304072&indexURL=4# ebayphotohosting
I couldn?t find a technical information on the manufacturers website.
Problem:
I only get sound at my left and on my right speakers.
The DPL 80 only has one cinch cable what i have puted in AUX and the 3,5 mm Klinke I puted in the X-Fi?s Line Out (nearest to the LineIN/Mic whole). I couldn?t conncet cables to Line Out 2 and 3 because my DPL 80 hasn?t a input whole for that. Pls look on the link with the pictures of the devices input wholes.
Any suggestions here? Thx

Phil,
Thanks for this post. I am trying to work with Band-in-a-Box, a music generating program on the Mac, and this "hack" could be a lifesaver since my home is wired with Sonos, but the Line-in ports are not (it appears) available (other than inside the central wiring closet).
So...I got the install, and ran the program. All seems to be fine - it says Setting Up AirSonos for ... {many, many speakers}. But, I don't see any of those speakers available inside my /Preferences/Sound... dialog box. Have you ever seen this problem? Any advice?
Thank so much!
Matt.

Similar Messages

FATAL: Could not read from the boot medium! system halted.

hi
im running win7 64 bit on my pc , installed virtualbox 4.1.16
i have downloaded oracle vm server 3 ( v29653-01.iso ) , created new virtual machine and attached iso file but unable to boot from the iso
i am getting FATAL: Could not read from the boot medium! system halted.
under vm settings > storage > i have
IDE: controller
v29653-01.iso
atrributes: cd/dvd IDE primary master
live cd/dvd unchecked
under general tab i have > Operating system: linux version: oracle (64 bit )
Edited by: user9182826 on Aug 4, 2012 5:34 PM
Edited by: user9182826 on Aug 4, 2012 6:12 PM

Not sure if you are running into the same issue..
OVM 3.0.3 - New VM loses filesystem after OS install
For OEL5 VMs on 3.0.3 you have to add 'xen_emul_unplug=never' to your kernel boot line.

Fatal error message - any suggestions on how to get this sorted please

when trying to use Adobe Captivate - I get an error message that says
fatal error has ocfcured and the application is being terminated. Adobe captivate has tried to dave all your work in the respective project folders as "CPbackup" fiels
Please restart Adobe Captivate
Help please

Is Captivate installed on your system, not on a networked drive? Which version and OS? Is the folder for CP projects, and for the cache on your system as well, not on a networked drive? Do you start Captivate as administrator? You could have problems caused by corrupt fonts, do you have a lot of fonts installed?

Speedstep-centrino in beyond doesn't work

Hi, I have Arch running on an inspiron 9400 with a core duo. If I boot into the normal arch kernel, cpu scaling works fine. But, in beyond it keeps saying:
FATAL: Error inserting speedstep_centrino (location of *.ko file): No such device
when I try to modprobe it. acpi-cpufreq does the same thing.
I'm not sure how to get more verbose output, but the device does exist as scaling works in the non-beyond Arch kernel, in ubuntu, in suse, and in windows.
Any help would be appreciated.

I've tried acpi-cpufreq and it does the same thing.
Also (it might be related) networkmanager from aur can't find any network devices while in the beyond kernel. This all works in the regular kernel though. Normally, I would be just fine using the regular kernel, but beyond supports the suspend to disk and the suspend to ram where I can't seem to get either working in the regular kernel.
I originally had the speedstep-centrino in the modules array and that's where I discovered the problem. Both speedstep-centrino and speedstep_centrino have the same problem. If there are others that have this working though, maybe I could just try and reinstall arch again and see if I have the problem again.
LB06: your problem is different, I'm getting a No such device error while you are getting a device busy error. n3rlynx might be right about your problem.
Thanks for the replies.

Tomahawk DataScroller - NullPointerException with navigation panel

Hi all,
I'm trying to implement navigation on a dataTable with DataScroller. Except from the dataTable content the jsp is a copy / paste from the tomahawk cars example.
My jsp structure has 3 main elements
- datatable
- scroller one for datatable navigation (next, previous, ...)
- scroller two for datatable statistics (pages counts)
When page is loaded there is a fatal error (NullPointerException)
If I delete the scroller one definition in my jsp there is no error, data table is correctly populated with 10 first rows and scroller two information is correct.
I tried with a simple ArrayList or with a DataModel in my backing bean. In both cases the NullPointerException happens.
I checked web.xml, faces-config, ... can't find a reason.
Any idea someone please? See stacktrace here under and sample of my jsp
Thank you very much for any help.
sunjavero
// here is my jsp extract:
<code>
<f:view>
<h:panelGroup id="body">
     <t:dataTAble id="data" ... >
     </t:dataTable>
     <h:panelGrid columns="1" ... >
          <t:dataScroller id="scroll_1" for="data" ... >
               <f:facet name="first" >
                    <t:graphicImage url="images/arrow-first.gif" border="1" />
               </f:facet>
               // (other facets same principle...)
          </t:dataScroller>
          <t:dataScroller id="scroll_2" for="data" ... >
     <h:outputFormat ... >
                    <f:param value="#{rowsCount}" />
                    <f:param value="#{displayedRowsCountVar}" />
                    <f:param value="#{firstRowIndex}" />
                    <f:param value="#{lastRowIndex}" />
                    <f:param value="#{pageIndex}" />
                    <f:param value="#{pageCount}" />
               </h:outputFormat>
          </t:dataScroller>
     </h:panelGrid>
</h:panelGroup>
</f:view>
</code>
exception:
org.apache.jasper.JasperException: javax.servlet.jsp.JspException: null
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:375)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
caused by (root error?):
java.lang.NullPointerException
     com.sun.faces.renderkit.html_basic.CommandLinkRenderer.getHiddenFieldName(CommandLinkRenderer.java:136)
     com.sun.faces.renderkit.html_basic.CommandLinkRenderer.encodeEnd(CommandLinkRenderer.java:318)
     javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:720)
     org.apache.myfaces.custom.datascroller.HtmlDataScrollerRenderer.renderFacet(HtmlDataScrollerRenderer.java:294)
     org.apache.myfaces.custom.datascroller.HtmlDataScrollerRenderer.renderScroller(HtmlDataScrollerRenderer.java:236)
     org.apache.myfaces.custom.datascroller.HtmlDataScrollerRenderer.encodeEnd(HtmlDataScrollerRenderer.java:207)

Hi all,
I found out a solution (after many hours of cursing!): Better to enclose DataScroller inside a form.
I don't understand why tomahawk example works fine without it (!!!)
If someone has an explanation he is welcome
And if someone explains me how to get more than 24 lines of stacktrace on windows 98 he is welcome too! (Unable to start tomcat from IDE because of wrong memory size), so have to start it from dos...
Sincerely yours... tired sunjavero

BI 7 Bex seems to crash quite often

Hi All,
Since using BI 7 my Bex seems to crash quite often (I hear the same complaints from other users) . Lately it seems to be even worse. it normally happens when I am trying to update the variable selection screen The system freezes and I get a fatal excel error. (guess it may be a widespread issue with Bi7) Does anyone meet the similar problem and do you have any suggestion for this.
Thanks a lot,

Hi everybody,
we experience similar problems - but: and this is very annoying: the problem occours very sporadicaly and seems not to be reproduceable.
There seems not to be any client-side log or error-message in the most cases. The client just crashes. The server-logs state that obviously the client just disappeared and hence the connection was broken.
It seems as if the crash would occour often in the context of opening the variables-screen.
We're at SPS18 - which is currently the latest service-pack-stack-level.
So if you should have any hints how to get more information about the problem, please let me know.
The SAP-Support just reacted with a link to note 9 --> problem is not reproduceable --> not soluteable --> order a consultant.

LabView Run-time engine 6.1 fatal error on install in XP Pro

I downloaded an application which uses the LVRTE to decode audio signals and display them graphically. I then downloaded the latest (?) version of the RTE installer for Windows .../XP from the NI site and it shows a version number of 1.1.0.0 if I move the pointer over the file. When I try to install the RTE using this file, I get a small message box with the title "Fatal Error" and the text "Installation ended prematurely because of an error" and no other clues. I've disabled the antivirus s/w (Norton) and the firewall (Zonealarm). I've even searched through the registry to see if there are any entries with either "LabView" or "National Instruments" in them and found nothing.
I'm running a properly li
cenced (yes, I paid real money for it) version of XP Pro with all the latest patches installed.
Any clues as to how to get the thing to install would be gratefully received.
Thanks in anticipation
Frustrated of Scotand

HI Jim,
do not give up. Go here: LabVIEW runtime engines.
You can reach this over Support >> Drivers and Updates >> All Versions ...
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Rep: Fatal pl/sql error Occured

Hi All
I have created one formula display chassis number based on Process(line_code).
When compile time its no error , but if i have pass parameter running time its generate the report error
Rep-0069: Internal error
Rep-57054 : In-Process job terminate
Rep-1401 : " Fatal Pl/SQL error occurred.
Below i have posted my Formula column what i written
function CF_Chassis_numFormula return varChar2 is
l_chassis_num varchar2(300);
begin
if :line_code like 'CHASSIS%' then
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where CHS_SCH_NUM = :schedule_number;
elsif :line_code like 'SPOT%' then
     BEgin
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where to_char(SPT_SCH_NUM) = to_char(:schedule_number);
Exception
          when others then
          Return null;
          end;
elsif :line_code like 'METAL%' then
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where MTL_SCH_NUM = :schedule_number;
elsif :line_code like 'TRIM%' then
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where TRM_SCH_NUM = :schedule_number;
elsif :line_code like 'PAINT%' then
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where PNT_SCH_NUM = to_char(:schedule_number);
elsif :line_code like 'FREC%' then
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where FREC_SCH_NUM = :schedule_number;
elsif :line_code like 'N100%' then
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where N101_SCH_NUM = :schedule_number;
elsif :line_code like 'PDIC%' then
     Begin
     select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where to_char(PDIC_SCH_NUM) = to_char(:schedule_number);
     Exception
          when others then
          Return null;
          end;
else
     l_chassis_num :='';
end if;
return l_chassis_num;
end;
Can please help to fix that bug
Regards
Sanjay
Edited by: 993525 on May 30, 2013 9:32 AM

Please post the details of the application release, database version and OS.
Please enable trace/debug and see if you get more details about the error.
Thanks,
Hussein

Fatal error during installation

I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
Thanks,
tuvixcrc

Hi,
Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
1. Re-download the Visual studio from Microsoft official site here:
http://www.visualstudio.com/downloads/download-visual-studio-vs
After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
Refer to the below page to know checksum detailed number:
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
Refer to
Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
3. Clean your %temp% folder and run the installer with Administrator permission.
Look the links to get more information:
http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If that still cannot go on the VS installation, please use
http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://Onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

HT1926 When i try to download itunes during installation it says something about a fatal error and closes down. how can i fix this?

i have had itunes downloaded on my computer before but the computer had to be repaired becuase it had viruses and now i cant reinstall itunes. whenever i try to install it again something pops up that says a fatal error has occured or something like that. does anyone know how this can be fixed?

the older version of bonjour could not be removed
Let's see if we can make some progress with that one first.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HP Connection Manager Fatal Error

When I boot up my HP Pavilion dv6t, a popup will appear and say
HPConnectionManager.exe - Fatal error
A fatal error has occured, check the HP Connection Manager in Event Viewer for more details.
Object reference not set to an instance of an object.
I've tried repairing but that didn't work and I've also downloaded HP Connection Manager version 4.1.25.1 but that didn't do anything. Someone help?

Well, I fixed it. I restored my computer because my HP Recovery Manager wasn't working so that fixed everything . Although, with any old restore, you have to transfer everything back onto your computer, which took hours

CC4 not working with OSX 10.9 - Fatal Error Message

I just loaded Creative Suite 4 from my old Mac to my new Macbook Air (OS X 10.9). Everytime I try to open a document the program quits and it says "Fatal Error - Missing Component." followed by the following:
/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
How do I fix this?

I've branched this to it's own thread, since the issue you're experiencing is unrelated to the one you replied to, and it would be confusing to try and handle them in the same thread.
Please provide as many of the follow details as possible, so I can attempt to reproduce the issue you're describing (I realize you've provided some of it):
Read Before Posting: How To Get A Useful Answer To Your Question

Xi-Fi Fatality Rear channels appear in the front chann

?My fron speakers are some how using the rear channels as well when I test them, and it's apparent that the rear speakers are not being used save for quiet feedback. This problem just arose when I noticed a lack in rear noise, and is unsure as to what may have caused it last thing i remember toing is cancelling an update for logitech's Mx58 mouse.
?I'm using an Xi-Fi Xtremegamer Fatality card, Vista 32-bit, and logitech Z-5500s. There is nothing wrong with my speakers i've checked them and test the audio channels and they're fine.
?I've tried reinstalling and updating the dri'ves to no avail. Any insight or suggestions would be appreciated. Thanks in advance!
P.S if you require more info please ask, as you can tell my abilities with computers are lacking. ?

I have the same?annoying problem.
No matter what I try,
I don't get sound from my rear speakers when using the creative audio console.
Only when I play a DVD with mediaplayer I get my surround speakers to work properly.
My?setup
Intel E6600
2GB of Ram
Intel D965WH Mainboard
Vista Ultimate 64-bit
Creative X-FI Fatalty pro Gamer? (latest driver installed ofc)
Using an optical?cable to connect to my Marantz SR7500 Reciever
Message Edited by Nosfera7u on 03-2-2008 0:09 AM

Getting fatal Exit Code 34 when installing an app

Anyone running into this? I download an app (PS 6, ID 6, etc.) via AAM and then it tries to install. Towards the end of the install I get a Fatal Error with Exit Code 34. The log msg reads:
FATAL: Payload '{E2286898-049D-43EF-AA30-0A93E3744AC3} Camera Profiles Installer_7.1_AdobeCameraRawProfile7.0All 6.0.98.0' information not found in Media_db.
I tried downloading and installing a trial version of PS 6 and the same error occurred. I tried running the CS Clean-up Tool but it said that there were no CS sessions installed on my iMac (latest version of Lion). I completely deleted beta and trial versions of CS apps before running AAM. I did have the RC candidate of Camera Raw 7.1 loaded on my Mac at one time but there is no uninstall app for that (at least that I can tell). It seems that the RC 7.1 may be involved with this error but I can't pinpoint how to get rid of it.
Any ideers out there?

I'm having the exact same situation, with the exact same error on two separate PC's (Windows 7 based). I've tried everything I know plus everyone else's suggestions from the forums since Friday. At this point, I am getting very frustrated. I had success installing some of the programs, but they were the ones that were not previously installed with CS5 Prod Prem or the beta testing, So I have Dreamweaver, Acrobat X, Fireworks, etc. because they are not part of the Prod Prem suite and therefore have not previously been installed. Everything else, AE, PS, PR, IL, etc., gives me the following:
Exit Code: 34
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s), 0 warning(s)
FATAL: Payload '{B9CB63C4-46FD-4394-95E4-0602E3B4D7F6} Camera Profiles Installer_7.1_AdobeCameraRawProfile7.0All 6.0.98.0' information not found in Media_db.

X-Fi Fatality on a Thomson DPL 80 HT 5.1 System. How to get more as 2 speakers wo

Similar Messages

Maybe you are looking for