X-fi fatality platinum champion series windows xp

recently installed my sound card onto windows xp service pack 2, i've installed all the relevant drivers, it doesnt seem to read the x-fi, well it does but not to make it work. just reads the sb x-fi audio [9c00[

Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

Similar Messages

Unable to reinstall X-FI Fatality Platinum Champion series..

<Unable to reinstall X-FI Fatality Platinum Champion series.. ok seeing as i got no response at all in my other post here>>>> http://forums.creative.com/t5/Windows-7/X-Fi-Platinum-Fatality-Champion-Series-Win-7-x64-Error-I-000/td-p/547599?and now i have a new problem.. i started a new thread..
so since waiting for a response here i've noticed that along with my other problems that every now and then that a speaker here and then used to drop out.. then just a little while ago i noticed that i coudn't get anything other than the 2 front speakers on my Z-5500's to work.. so i decided to uninstall and reinstall everything related to the card..
well just now i uninstalled all things related to my creative card?through the uninstall programs feature?in the control panel.. then ran driver sweeper.. rebooted.. then driver cleaner.. rebooted.. then ccleaner.. rebooted.. then i repeated this process again in safe mode.. then i went to the device manager and removed the x-fi as it was still listed and the multimedi audio controller.. everything went ok.. or so i thought..
rebooted and began reinstalling the drivers listed as "COMPATIBLE" with Win7 x64.. but i noticed when installing the 2.8.003 driver that it took mere seconds for the sri'ver to install.. rebooted and still no sound.. installed the rest of the drivers and apps listed for my setup and still no sound.. also i noticed over half of the icons in the programs menu never even installed..
long story short i repeated all the steps mentioned above and tried the drivers from my Vista install disc and got an error saying that the drivers were not compatible with my operating system and was only given the option to exit..
any and all help would be greatly appreciated THX!!

Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

Sound Blaster Titanium Champion Series

&?Hello,
I recently bought a Sound Blaster Fatality Titanium Champion series cound (the one with the front panel included).
Sound and everything seems fine. One very annoying issue (not for me but mainly for the other people who are listening to me on Ventrilo) is that they hear a constant "buzzing" noise when I speak. I can't seem to get rid of it.
It was actually worse before as I was able to hear the constant buzzing too. Until I unplugged the mic and audio jack from the back sound card and plugged it into the front panel instead.
I also updated to the latest drivers as far as I can tell.
Any idea on how to fix this?
I am using a Sennheiser PC360 Headset. I don't believe it is the headset's issue, it works fine on my other systems without the constant buzzing.
Many thanks in advance.

Eljher,
Sorry about that, Customer Support do not monitor these boards. Please write to them here.

Cracking and popping noise Sound Blaster x-Fi Platinum Running on Windows 7 32 Bit

Hi everyone, I am using a x-fi platinum card and it simply wont work with Windows 7 Ultimate 32 Bit. I have been using both windows 7 public beta and release candidate for last 8 months. Let me give you my PC configuration.
Intel Pentium D 3.4GHz
2GB DDR2 Memory running in Dual Channel Mode
ATI Radeon HD 4670 Video Card With 52MB DDR3
It has a built in sound on mother board (Disabled at the moment)
With the above configuration I tried using my x-fi platinum on both Windows XP and Windows Vista, and it worked perfectly without any problem. When I upgraded to windows 7 beta for the first time with the creative beta driver for windows 7, I noticed that whenever there is any on screen activity, such as minimizing and maximizing windows, switching windows, scrolling, photo or webpage transition, etc. there are cracking and popping noises. And if there are continuous or too much activity on the screen at some times the sound card completely fails and unable to provide any sound. When I took the sound card out and enabled the on board audio chip (Realtek HD Audio), the sound was fine without any cracking or popping issue. I eventually upgraded to Windows 7 RC and also currently using the latest driver for windows 7 and I am still having the same problem. As a reasult I am being forced to use the on board realtek audio solution which provides really crappy sound compared to x-fi platinum.
It appears that the problem exists only when I try to run x-fi platinum on windows 7. I really hope there is a solution for this otherwise I will have to sell my beloved sound card which I have been using for at least 3 years on ebay and stick with low quality Realtek HD sound system.

Sille wrote:
seems X-FI cards got the problem.... shud be hotfixed by creative.
Not all of them, I have none of those problems with my Xtreme Music. This won't help the guy asking about the Xtreme Audio (search the Sound Blaster section for the one for your card), but using this,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485
with this installed over the top,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Auzen-Forte-driver-2-20-000-HomeTheater-HD-RC4/td-p/53548
I don't get any of the popping and cracking that others do.

Problem with console launcher and Titanium Champion Series

Hi all. I've recently got a X-Fi Titanium Fatality Champion Series, it's running on XP. As you know with the original drivers the I/O front panel didn?t work on XP, so I updated to the latest version 2.7.8. The problem is that now the I/O front panel seems to work, but the console launcher has been updated too to the 2.6.1.45 version and it's not working properly, when previously it was. I?ve detected two problems:
1) You can enable the equalizer on any mode but the list of presets (rock, pop, jazz...) don?t appear
2) The console launcher crashes in the very moment you click on the Mixer thumb index, at least in Game mode, appearing an error message
I would thank any help. Bye.

Well, given I've still not received an answer, I think this may help somebody with the same problem.
I decided to install the Console Launcher 2.6.1.49 (beta) and it's working perfect so far, the two problems I told about have been fixed.
Another problem I had with the latest official drivers was that the volume panel wasn't shown at the taskbar. I simply fixed it by installing the original volume panel you can find in the installation CD.
Bye.

Does the X-Fi Champion Series do Digital decodi

I am looking for a new soundcard, and the XFi Platinum Fatalty Champion Series is on the top of my list.However, after searching every specification site I could find, and browsing/searching through this forum, I still am not completely sure if the soundcard does Digital Decoding by itself or not. (if I were to plug a digital input in the optical, will I be able to listen to this through my analoge 7. speakerset?)?Many thanks in advance, any clarification on the subject is appreciated.Message Edited by eelco on 07-24-20070:34 PM

Or would the software be able to decode the digital input, even not when playing a movie?Else I see no use for digital input on the I/O box...
No, the software does not decode from the digital input.Digital input on that card can be used for stereo PCM signals. Search the net for hacked drivers.. who knows

Sound Blaster X-Fi Titanium Fatal1ty Champion Series and Win 7 64Bit

Now that Win 7 SP is out, i am planning on moving over to the Win 7 64Bit OS.
Whats the best way to setup Sound Blaster X-Fi Titanium Fatalty Champion Series card software setup.
Is there a DVD i could download or be sent for Win 7.
Whats the best way to proceed...
Thanks
red

OK I got it!!
I put in a Price Alert at the egg and got it for 09.00/with FREE shipping so I'm stoked!! it DOES have a yellow sticker on the box that says "works with Windows 7" so I guess this is all I need.
Are there ANY suggestions on how to go about installing this in Windows 7 64bit, I want the front panel to work and will use it for movies music and mostly gaming.
what about Windows 7 installing the card as a standard sound device at boot, is there a way to prevent this if not how is this fixed?
Should I use the newest beta drivers? or wait till I see if I have any problems with the sound not working?
what about the user made drivers I have seen around these forums, I know they are most likely not supported but how about functionality? would they be better?
thanks for any suggestions.

Fatal error C1189: #error : WINDOWS.H already included.

Hi,
Can someone please explain why the following cpp file can get a compile error below?
C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\atlmfc\include\afxv_w32.h(16) : fatal error C1189: #error : WINDOWS.H already included. MFC apps must not #include <windows.h>
As you can see, there is only one include statement for afxwin.h. I cannot think of any reason for this error. Could you please help? Thanks in advance.
JD
#include <afxwin.h>
//#include "resource.h"
//#include <atlbase.h>
//#include "CAData_i.h"
class CCADataModule : public CAtlDllModuleT< CCADataModule >
public :
DECLARE_LIBID(LIBID_CADataLib)
CCADataModule _AtlModule;
// Used to determine whether the DLL can be unloaded by OLE
STDAPI DllCanUnloadNow(void)
    AFX_MANAGE_STATE(AfxGetStaticModuleState());
    return (AfxDllCanUnloadNow()==S_OK && _AtlModule.GetLockCount()==0) ? S_OK : S_FALSE;
// Returns a class factory to create an object of the requested type
STDAPI DllGetClassObject(REFCLSID rclsid, REFIID riid, LPVOID* ppv)
    return _AtlModule.DllGetClassObject(rclsid, riid, ppv);
// DllRegisterServer - Adds entries to the system registry
STDAPI DllRegisterServer(void)
    // registers object, typelib and all interfaces in typelib
    HRESULT hr = _AtlModule.DllRegisterServer();
return hr;
// DllUnregisterServer - Removes entries from the system registry
STDAPI DllUnregisterServer(void)
HRESULT hr = _AtlModule.DllUnregisterServer();
return hr;

Hi Rajesh,
But, as you can see, I didn't include "stdafx.h" in the cpp file. As I mentioned, there is only one include statement. Another evidence is to add the 3 marco statements you recommended as below. I get the same error. The
middle macro statement is de-highlighted. It means _windows_ is not defined. So, somehow, in this case, afxwin itself causes this error. I really cannot explain. Any thought? Thanks.
JD
#ifdef __windows__
#undef __windows__
#endif
#include <afxwin.h>
//#include "resource.h"
//#include <atlbase.h>
//#include "CAData_i.h"

X-Fi Titanium Champion Series I/O Drive problems

0X-Fi Titanium Champion Series I/O Dri've problems? This is my final attempt to resolving this before?I request an RMA. I'm really hoping someone can help me figure out if my I/O dri've on my x-fi titanium Ch. Series is defecti've or it's a?software related problem. I don't get any sound from the headphone or mic jacks on the front dri've using headphones or headsets. The volume knob does?lower or raise in the Console Launcher?when I turn it and?as for the mic volume, I'm not sure. The LED's don't?light up at all, but if I press the Game Mode, CMSS-3D or Crystalizer I see them switching on the Console Launcher. The rear component does work as I can connect my speakers and get sound. I'm running Vista x64 Ult. Sp2 with the latest beta drivers 2.8 from daniel_K's support pack. I have uninstalled and reinstalled several times also removed and replugged the device incase of a connection problem. I've searched all over these forums and googled several keywords and can't find a solution. Can anyone point me to the right direction? Is this a common problem with the front dri've? I've read various posts about customer technical support being useless so I'm not even wasting my time with that. Any help is greatly appreciated. Thanks

I had this exact same problem for a very long time, but after recently taking apart my machine to dust it out and whatnot I decided to have a go at plugging the device in again, and found that in order to plug it in properly for that larger connector you have to push it in really hard for it to go in all the way, to the point where it hurt my finger to do so. But after I did this (I had the card out while doing it, as it seemed impossible to get the connector in all the way otherwise) the lights and ports worked properly.
Hopefully it's this simple for you, but I can imagine it is due to the fact your problem was word for word exactly the same as mine.

Keyboard not working properly on HP laptop - Pavilion g series/Windows 8

My Keyboard keys are not working properly on HP laptop Corei3 - Pavilion g series/Windows 8. Please I need help.
Monty West

Hi Monty12,
I understand that you are having a problem with the keyboard key for your laptop. I will try my best to help you with this issue. To better guide you, could you please give me some more information.
1. What is the Model Number of your laptop? LINK: How Do I Find My Model Number or Product Number?
2. What operating system are you running on the laptop?
3. Are the keys sticking?
Please let me know and I will be happy to help.
Thank you,
I worked on behalf of HP.

X-Fi Xtreme Fatality Platinum & Vista 5.1 not work

Here I am again hoping that in the many months I've had this sound card that a solution will drop in my lap and I still wait. I'm going to take another shot at this and hopefully someone who knows what the problem is can fix it.
Vista 64
X-Fi Xtreme Fatality Platinum
Logitech Z-5500 Digital 5. Surround Sound Speakers
I run a speaker setup using Stereo settings and the Left and center channels act as my Left and Right.
I run a Quadraphonic settings and the sound comes from the center channel.
I run a 5. Surround sound setup and the sounds come from only the center channel and subwoofer.
I've checked my hook up and speakers have never been touched since I've made the switch from XP/Audigy to Vista64/XFi.
Someone please tell me what is going on here and why my channels are way off then they should be I've downloaded and installed the latest driver from Creative Labs and used Daniel K's custom made drivers and nothing seems to fix it. I've had this sound card for 6/8/2008 and we're in 9/0/2008. That's 3 months of no sound on my brand new computer and my online gaming experience is really bad especially testing games like WoTLK and Warhammer and not enjoying the quality sound those games have. Please, I'm at a loss here and I can't find a problem. I refuse to purchase another sound card because I felt I've waisted a lot of money on this sound card and for the price I paid it should work.

It's funny how some people say you can enable 5. with vista 64 using alchemy but for 10 days now I have yet to get a response.

X-Fi Titanium Fatal1ty Champion Series stopped working

6X-Fi Titanium Fatalty Champion Series stopped working Hey guys!
After a totaly normal reboot, my X-Fi Titanium Fatalty Pro/Champion suddenly stopped working....
No sound and the led ont the side of the card also is black(same for the front panel) while the optical out still seems to be working.
Its still displayed as Creative sb xfi in the device manager but the main output device is shown as Internal AUX-socket in the sound options dialog (while the spdif-out seems to be ok)
<a rel="nofollow" target="_blank" href="http://i49.tinypic.com/332slj.png"]http://i49.tinypic.com/332slj.png[/url]
<a rel="nofollow" target="_blank" href="http://de.tinypic.com">[img"]http://i49.tinypic.com/332slj.png" width="639[/img] alt="Image and video hosting by TinyPic" height="399">[/url]
Reinstalled everything about 5 times.....doesnt work

Still no solution... but the spdif out/in realy seems to work....

Audigy 2 Platinum EX and Windows 7 :'''(

)Audigy 2 Platinum EX and Windows 7 :'''(? Hi to all! I'm new here and my english is so bad..... so excuse me!
With Windows7 (x64 or x84 both!) my Audigy 2 Platinum EX doesn't work correctly!
I've just tried with official driver and update.... last driver are very very bad :'''(
I've partly resolved with unofficial drivers (downloaded on this forum) but external module
still doesn't? work :'''(? i can use only line-in and lin-out, but remote control is completly
unusable.... how can i do? Can you help me, plz?
TXH to all.
P.S.
Excuse me for my english....

)Audigy 2 Platinum EX and Windows 7 :'''(? Hi to all! I'm new here and my english is so bad..... so excuse me!
With Windows7 (x64 or x84 both!) my Audigy 2 Platinum EX doesn't work correctly!
I've just tried with official driver and update.... last driver are very very bad :'''(
I've partly resolved with unofficial drivers (downloaded on this forum) but external module
still doesn't? work :'''(? i can use only line-in and lin-out, but remote control is completly
unusable.... how can i do? Can you help me, plz?
TXH to all.
P.S.
Excuse me for my english....

Creative X-Fi Fatality Champion series - suspends my computer!

Hi there, I am completely dissappointed with this product. It suspends my computer without a reason! :angry:?It happens at least one time per hour and I don't know completely what to do! I had to press reset on my computer because alt+ctrl+del does not allow to leave this state of my computer I hope my sound card works properly and it is not hardware problem... In that moment when my computer suspends I hear buzzling noise! Or crashed sound... Does anyone experienced something like that? What I should do? :mansad: Thanks for help. My configuration is:?Pentium 4, 3Ghz (800MHz FBUS) on ASUS P5GD-pro series Mainboard, ,5 GB Memory from Kingston (3x52MB, DDR-400Mhz), Hard disk from Samsung (Spinpoint 20 GB), G-Force 7600GT (256MB DDR3), Computer Case and power supply from AC (arctic Cooling - Silentium T2, 350 WAT), except of this I have - Seagate portable harddisk 320GB (on USB) and some USB things like mouse and keyboard conected to the computer.

sure thing. I'm happy it worked out.
Creative drivers are known to be somewhat problematic for a lot of people.
Also, as far as I know, most sound cards are not formally windows 7 compatible, even though they work perfect under windows 7.
In fact I got Creative Arena headset & x-fi titanium fatalty pro. They both work flawlessly with my Win7 32-bit. No complains.

Help Need ! X-Fi Titanium Championship Fatal1ty Champion Series

Hi guys,
i recently bought?this sound card
i encounter 2 problems which i desperately need help with cause creative isnt giving me a satisfied answer
Firstly,?i cant update to the latest driver.
if i update...everytime i try to press any of the buttons(Game mode, x-fi?CMSS 3D, x-fi crystalizer) on the I/O front panel console.
i seem to lose control of I/O front panel console. i cant control the Main volume,Mic volume or any of my 3 modes using my I/O front panel console,?i can only change them through creative console launcher
secondly,
everytime i try change my recording device to "microphone FP". it keeps jumping back to "microphone" which apparently is the port on the sound card itself.
its kinda stupid to use the mic port on the sound card rather than the I/O front panel port being i paid such a high price for it mainly because of its specs but partially cause it has a I/O front panel.
someone please help me with this problem cause creative technical support hasnt been able to solve my problem
so im trying my luck to see if anyone is out there suffering the same problem as me?would?gladly?share his solution with me?to this problem =)

CRe: Help Need ! X-Fi Titanium Championship Fatalty Champion Seriesx <a rel="nofollow" href="http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485"]http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485[/url]
download the above package. remove everything you have installed originally from the CD, etc. Turn off your internet connection if you have broadband because it will install its own updates through windows updates. Install the above package. Retest your card and I/O bay.
I have used the above pack with an X-FI Xtreme Music OEM from Dell, an X-FI Fatality Pro PCI, and the Titanium. It works great. Afterwards you can update to the latest drivers without problems. If you start, as you already have, with the newest driver, things just dont work quite right in my opinion.

X-fi fatality platinum champion series windows xp

Similar Messages

Maybe you are looking for