X-Fi I/O Drive SPDIF input stopped working - driver issue?

HI have an X-Fi Platinum card with the I/O Dri've module that I have been using for some time now to accept digital input via digital coaxial cable from my Alesis Multimix 6 music mixer to mix down and record MP3s from my hardware music synthesizers. I am running Windows XP SP3. The SPDIF input has always worked like a charm until I updated the driver via Creative AutoUpdate. The SPDIF input no longer registers any signal, but it still shows in both Creative Volume Panel and Windows Volume Control. Default sound input and output is set to X-Fi (D000). I tried uninstalling the new driver and reinstalling the original driver, and the SPDIF input is still dead.
Is this a known driver issue? Any idea on how I can get this working again?
Thanks, all.
Larry

I/O dri've now works with this software?http://forums.creative.com/creativel...essage.id=7369?which includes the 3/5/07 driver. Steve

Similar Messages

  • Optical SPDIF output stopped working- why?

    I recently installed a larger HD and more RAM in my 1.63MHz Mini. After getting buttoned back up I noticed the optical SPDIF output stopped working (as in NO laser visible). Is there any possibility that this could be related to the OS (10.5.8)? Seems unlikely since it was fine before installation.
    I really need this as it is my only option for interfacing with my playback system.
    Rich

    Hi Rich,
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    Try updating the printer driver.

  • Regza WL66: HDMI input stopped working

    Hello,
    the HDMI input of my Regza WL suddenly stopped working two weeks ago after having worked fine for several years. Before, different kinds of devices were recognized without any problem: DVD player, receiver, laptop, media player. Now, no device at all is recognized, the screen remains blue.
    The cable is not the problem. I tried with different cables, and also tested the cables with other monitors; they're ok.
    Is there any chance to fix this?
    (The SCART and component input still works -- but that's not HDMI.)
    Thanks in advance for any idea.
    Sundowner

    Hi
    Im afraid the HDMI port may malfunctions.
    The TV troubleshooting is very limited. To be honest you have no many options.
    You could try to test different HDMI ports (there are two as mentioned by Keany) and you could also try to reset the TV to default.
    But this is everything you can do
    Im afraid if both HDMI ports are dead, you would need to get in contact with an service engineer available in your country.

  • [Solved] Key input stops working in urxvt in Openbox

    For you who use the Openbox window manager and the urxvt terminal emulator, does your keyboard sometimes just kinda stop working in urxvt?
    For example, in urxvt, type "openbox --reconfigure". Your keyboard stopped working, didn't it? "Alt-Tab" to another window and then back again. Typing in the urxvt windows works again!
    Another example, load a urxvt window. Now go to a TTY (Ctrl-Alt-F2). Now go back to X. The same problem! No more keyboard input in urxvt!
    This is a really minor bug. But seeing how Openbox is the most popular floating window manager and urxvt is the most popular terminal emulator for Arch Linux users, I can't believe that I'm the only one that noticed this...
    Is there a way to fix this, so urxvt doesn't lose keyboard input?
    Last edited by drcouzelis (2013-03-01 06:07:59)

    Thanks for trying it out.
    Here is my .Xdefaults file:
    URxvt*iconFile: /usr/share/icons/Faience/apps/96/terminal.png
    URxvt*scrollBar: false
    URxvt*termName: screen-256color
    URxvt*saveLines: 10000
    URxvt*cursorBlink: true
    URxvt*pointerBlank: true
    URxvt*pointerBlankDelay: 987654321
    URxvt*font: xft:Terminus:size=12
    URxvt*perl-ext-common: default,fullscreen
    URxvt*keysym.F11: perl:fullscreen:switch
    URxvt*background: #0f0f0f
    URxvt*foreground: #c8c8c8
    URxvt*color0: #251f1f
    URxvt*color1: #eb4509
    URxvt*color2: #94e76b
    URxvt*color3: #ffac18
    URxvt*color4: #46aede
    URxvt*color5: #e32c57
    URxvt*color6: #d6dbac
    URxvt*color7: #efefef
    URxvt*color8: #5e5e5e
    URxvt*color9: #eb4509
    URxvt*color10: #95e76b
    URxvt*color11: #ffac18
    URxvt*color12: #46aede
    URxvt*color13: #e32c57
    URxvt*color14: #d6dbac
    URxvt*color15: #efefef
    I'm currently using the "rxvt-unicode-patched-left_ptr-unicode3" package, but I experienced the same problem with the official "rxvt-unicode" package.
    As I expected, it sounds like the problem is just me... Maybe I can try creating a new user and slowly adding in my personal config files until urxvt breaks.

  • Safari 8.0.4 form inputs stopped working

    Suddenly Safari 8.0.4 when presented with a form does not allow me to fill it. Cannot type inputs, radio buttons stopped working etc. Firefox works fine on the same input form. Any help will be appreciated.

    If you have another browser:
         Use  free  AdwareMedic by clicking “Download ” from here
         http://www.adwaremedic.com/index.php
         Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
         Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
        “Quit AdwareMedic”.
                   or
    If you don’t have another browser:
        Remove adware  manually  by following the “HowTo” from Apple.
        “Remove Genieo, also known as InstallMac”
        http://support.apple.com/en-us/HT203987
          Safari > Preferences > Extensions
        Turn those off and relaunch Safari again.
        Turn those on one by one and test.

  • Adobe Bridge CS6 has stopped working - has issue been resolved?

    Hello.
    I am experiencing the above problem with a new install of CS6.
    Has this issue been resolved?
    CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
    Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
    Thanks for any help you can provide.

    A follow up to the above.
    There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
    C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
    For those of you who may have this situation.
    Here is where I found the solution (sixth thread down):
    Bridge CS6 won't open running on Win7

  • Keyboard input stopped working on Solaris 11 Live x86 Toshiba R835 Notebook

    I can boot, and keyboard input works for login, but does not work for xterm, terminal, Firefox, ... Mouse works for gparted and apps. It did work for 8 hrs but stopped. Any suggestions ?

    brebs wrote:
    (EE) Error loading keymap /tmp/server-0.xkm
    I would be googling for that. E.g. see thread.
    So did you update xkeyboard-config? It's tedious that you haven't had the sense yet to list which packages got updated, along with version numbers.
    It's nice to see you enter here, brebs!
    A few things have happened:
    I just noticed that the file '/etc/X11/xinit/xinitrc' isn't present at all! It was present when I posted the thread (I think). So X didn't even start. I had to create .xinitrc in my home directory with single like 'exec xterm'. X started fine but keyboard still didn't work.
    Out of nowhere, I thought of using nouveau drivers instead of Nvidia drivers. So I went ahead and switched to nouveau and bam - keyboard is working. Enabled GDM and keyboard is still working. I still would like know what went wrong with Nvidia - for educational purposes.
    What more details should I provide? I'd like to have Nvidia drivers back.
    Last edited by akshay2000 (2013-02-25 16:17:07)

  • Computer locking up/input stops working

    ok get this. Brand new 30gb 5th gen ipod, bring it home... plug the cord in WITHOUT the ipod and my computer locks up and starts beeping continuously. Happens everytime, though once I did see the confirmation that the hardware had been found in the corner.
    Im running a PC with XP sp2, have 4 usb2 ports... which all react pretty much the same... Ive brought the ipod to an internet cafe and it seems to work fine...
    HELP!

    Quote
    I have an MS 6590 Ver 1 main board
    Which one exactly?
    http://global.msi.eu/index.php?func=searchresult&keywords=ms-6590
    Quote
    The hard drive is brand spankin new just bought it today April 2nd (WD 160GB)
    IDE? SATA?
    Did you have any problems with the old hard drive?

  • Why does keyboard input stop working in Keynote?

    Everytime is switch between Keynote windows (when multiple Keynote decks are open) or when I switch between spaces (Mission Control) Keynote seems to lose focus of the keyboard.
    For example, after switching to a Keynote window, I select an object and Keynote doesn't respond to the key strokes. So say I select a text object and start to type or press Cmd key and "C" to copy the text object, it doesn't work. I have to select and deselect the object a few times before the key strokes are recognized by Keynote.
    Very annouying, given that I use keynote at work all day long.
    Is there a solution?
    I am using Keynote version 5.1 on Mac OS X 10.7.2.
    --Dan

    I have this same problem, since updating to 10.7, same thing happens in all the iWorks apps.
    This is beyond annoying, its a massive waste of time for me. Its as if the program loses its connection, and you either have to select and deselect multiple times for click the program icon again.
    What is Apple doing about this?
    I'm on 5.1.1 and 10.7.4
    Michael

  • Envy 4500 stopped working (wireless issue)

    I am using Mac osx 10.9.4, my one week old Envy 4500 has been working fine until yesterday.
    My computer cannot find this printer on the network, although running a Wireless Network Test on the printer print out said there is "No problems found" and everyhing is a PASS and the SSID network name it is connected to is accurate. 
    I have tried uninstalling the printer from the computer according to instructions on this website and reinstalling the driver again, but that has not worked. 
    My brother is able to detect and print from his PC laptop. So the problem seems to be with my computer.
    Kindly help me. Thank you.

    Hello @evon1319 , and welcome to the HP Forums!
    I see you're experiencing connectivity issues.  I would like to help!
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend reinstalling the HP ENVY 4500 series Full Feature Software and Drivers.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Adobe InDesign CS5 Has Stopped Working (installation issue)

    Please allow me to preface this by saying that this situation is RESOLVED, but I wish to share what happened to me with others for information purposes as I couldn't find anything regarding this issue online last night (mind, I was quite exhausted so might have missed it).
    The situation:
    I have CS5 Master Collection Upgrade.  I performed the installation.  All apps working just fine EXCEPT Adobe InDesign (see error in title).
    Beating of head against the wall continues for five hours as I uninstall, use cleaner, defrag, reinstall (you know the routine) SEVERAL times (why I thought doing it just once more might make a difference is beyond me).  I knew this install should work because I was using the entire CS5 suite only a few days ago until my system suffered a serious failure and require reformatting, reinstalling etc.
    So... after a couple of hours on the phone with Adobe tech support (an almost first for me in about 15 years or so of using Adobe products), it was discovered that InDesign's plugin directory was corrupt (rather, one or more files were laid down corrupt).  Uninstalling and using the cleaner DOES NOT remove the temp/backup files.  I knew something was up when I reinstalled the upgrade and it did not ask for my CS4 code (even after using a M$ reg cleaner), and this confirms it.
    Also I noticed that InDesign is being laid down during the transition from Disc 1 to Disc 2.  A colleague of mine had an odd issue with his PC not accepting Disc 2 at first (a few weeks ago).  I can only conclude that for some people, and some installations (because my first installation was flawless), InDesign will lay down its plugins corrupt.
    As I said, this is resolved now (I copied over the plugin directory (C:\Program Files (x86)\Adobe\Adobe InDesign CS5\Plug-Ins) from my colleague's PC where InDesign was working fine), but I wanted to share in case this spares someone else the pain and suffering I just experienced.
    The irony, of course, is I'm under deadline and of all the programs right now, I needed InDesign the most!  LOL.
    Cheers, everyone.
    Alex

    I am operating in Windows Vista.  The last time I used the program it was responding normal and it closed out normally.
    I haven't added any fonts and have cleaned out my recovery folder and it is still doing it.
    My machine froze yesterday morning and I had to do a hard reboot, but I was not working in ID at the time and it wasn't open.  Everything else is working normally.  Even though I knew it wouldn't work, I did uninstall and reinstall the program and of course that didn't solve anything.
    Any other advice is appreciated.  I am at a loss.

  • Canon Printer stops working (software issue?)

    have my Canon iP4200 printer hooked up to my iMac and have been using it for years with out any problems until today. When i try to print something nothing happens. In the Printer queue application thing in the dock, it shows the document in queue and its status is "printing". On top of the window it shows this message: 'GenericClass: waiting for device' whatever that means i assume thats the issue but have no clue what it means. I have so many things to print for uni and need to get this working again, how do i get it back to working order again??

    I did all of that and didn't seem to work. However i think the issue is with VM ware Fusion, because everytime i have that open it displays that printer error msg (regardless whether im printing on Mac OS X or XP), but when VMF is not running it prints fine...

  • Audigy SE - mic input suddenly stopped working

    .Audigy SE - mic input suddenly stopped working6 I use a Creative Audigy SE sound card and it has worked fine since the day I bought it until recently the mic input stopped working.
    Fair enough, I tested with spare headset in case headset was faulty. No workie. I tested headset in laptop - workie.
    So I bought a replacement card, no workie. I get sound out, but cannot get a signal on my mic when connected.
    I have troubleshooted this extensi'vely (checking the settings in the creative panel, windows control panel, the mics mute switch is not on) and have run out of leads.
    edit: i have also updated drivers and tried a different pci slot.
    Message Edited by rdegan on 07-4-2009 0:47 [email protected]

    So after my mic input stopped working on my Soundblaster Audigy, I have done the following troubleshooting:
    - checked headset works in another computer;
    - bought a brand new sound card;
    - checked all driver settings for an accidental mute;
    - updated sound card drivers;
    - ensured on-board audio is disabled;
    - formatted windows XP;
    - Run XP control pan audio diagnostics.
    Still I cannot get sound on my Mic input. My sound output to headphoes is fine. Can anyone offer any other trouble shooting?

  • Keyboard input has stopped working in MS Word - Yosemite

    I made the mistake of upgrading to Yosemite in December.
    The latest issue is in MS Word (2011, version 14.3.6)
    When trying to switch between two Word documents, the keyboard input stopped working. I am using the built-in Mac keyboard. The trackpad still works, and keyboard input works in some programs (Safari), but it's impossible to type anything into Word. I've tried "Esc" in case some menu was selected, but to no avail.
    I've also had this problem in EndNote.
    Curious if anyone has a solution - and if you have tips for how to get Word to run faster in Yosemite, please post!
    Thanks ~

    There have been a couple reports of keyboard failures, mostly initial key presses. Mine initialy caused USB bus timeouts and startup problems and then failed completely. Call Apple or take the machine/keyboard back to a Apple store for a replacement.

Maybe you are looking for