X-Fi I/O Drive upgrade kit software not install

Hello , I have installed my new X-Fi I/O Dri've upgrade kit hardware today , but I am having some trouble with the software installation.
This is the message I receive after the installation has initiated ->
"Setup is unable to detect a supported product on your system.Please insure that your product is properly installed before running this setup program.Setup will now exit."
After that the software seems to install but I'm not sure it installs correctly. I can't see anything different in the usual X-fi software menu , and the supplied I/O dri've remote control does nothing.
My soundcard is an X-fi XtremeGamer Fatalty Pro Series.
Thanks.
http://img258.imageshack.us/my.php?image=installerroriodri'vesoftcm2.jpg
Message Edited by celtic_fury on 05-30-2007:29 PM

You can enable/disable the muting on jack input detection.
As for the output, I think it outputs the front left and right, so you would need to switch to headphone mode in order for it to be stereo only. However, the dri've also has digital out and from what I understand, that only outputs in stereo unless it's using a surround sound source such as a DVD, but I could be wrong.

Similar Messages

  • Solid State Drive Upgrade Kit v300a with Windows 8.1 on Envy laptop

    I am trying to install the Solid State Drive Upgrade Kit V300a in my new HP Envy with Windows 8.1. This upgrade was listed as an option for this model  and was bought with the machine.
    The doc lists OS supported, but Windows 8 is not in the list. Is Windows 8 supported?
    The included disk labled "Arconis" includes ATIHO user guide pdfs and an HP-Drive-Install-Guide-1.15.13-327pm pdf. The install guide mentions using Arconis. The Arconis user guide says to run "setup" to install Acronis but there is no setup file on the disk. I have chosen the setting to display hidden files and there is nothing on the disk but pdfs. The v300a box claims that it includes Acronis Cloning Software.
    How do I install this HP upgrade on my new HP laptop?

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
    YES, Windows 8 and 8.1 should be supported.
    Please refer to this "HP SSD Upgrade Kit Installation Guide" for instructions on setting-up the HP SSD Upgrade Kit and cloning your factory installed hard drive. Please read the guide carefully and in its entirety. Next, assembly the SSD drive and the drive enclosure, per the instructions on page 9. Now, carefully follow the cloning instructions from page 9 to page 26.
    Per the instructions, the cloning software should be on the included CD/DVD and it may be a bootable disc. However, if you are unable to locate the required software, please see www.HPSupport.pny.com to register your product and download any needed software.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive?  I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.

    I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive?  I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.

    Short answer: You do NOT have to reinstall all your apps and copy your files back.
    Longer answer: Upgrading the OS does not touch any user files. Upgrading the OS should not interfere with any applications which are compatible with Mavericks.  In my experience non-Apple apps are generally left unchanged by the upgrade.  It is possible that some apps may need to be upgraded. One good resource for checking application compatibility is RoaringApps.
    Finally, it is always wise to backup everything, just in case.

  • Oracle Software not installed

    Hi!
    I tried to install SAP NetWeaver 7.1 with Oracle 10 under Windows Server 2003 64bit in english fully updated. But I ran into two problems which prevented the SAP installation to finish : first once all the oracles updates were installed, the oracle wintows service would not start; second sapinst never managed to find the oracle installation and always answered "Oracle Software not installed".
    For this installation I downloaded all the installation files from the SAP download center like this :
         - On http://service.sap.com/swdc in the left frame : download/installation and upgrades/entry by application group
         - then in the center frame : SAP NetWeaver/SAP NetWeaver/SAP NETWEAVER CE 7.1/Installation/Windows Server/Oracle/
         - I added everything to the Download basket but "Oracle 10.2.0.2.0 Patch for AIX 64bit" and "Oracle 10.2.0.2.0 Patch for Solaris 64bit"
    - then I took the last patch for Oracle 10 on the SAP download center :
         - on http://service.sap.com/swcenter-3pmain in the left frame : Oracle/Oracle 64-bit/Oracle 10.2.0 64bit/Oracle 10.2.0.2/NT_x86_64
         - I added the last patch to the download basket
    Then I followed this installation steps :
    installation of the last jdk : jdk-6u3-windows-i586-p.exe
    installation of Oracle 10.2.0.1 with : Oracle10.2.0.1-51031678\NT\I386\sapserver.cmd
    installation of the last update for oracle 10.2.0.2 with : DVD_ORACLE_10.2.0.2_Patches_WIN_AIX_SOL\NT\I386\setup.exe
         => I had a problem with the installation of the patch chich detected the wrong version of windows so I forced it with : OPATCH_PLATFORM_ID=233 (I checked it before, it should really be the right one)
    installation of the last patch of oracle :
         - definition of ORACLE_HOME and addition of opatch to the PATH
         - execution of "opatch apply" in the folder Oracle-10202_Patch16_MSWINX86-64-6397030\
    ===> *PB* : the installation of this patch enables the oracle windows service which won't run and doesn't send any errors (just timeout). I didn't find any help on this one. When I tried to start sqlplus in console, I got errors about DLLs not found but they exists in the bin directory of oracle and are in the PATH...
    installation of NetWeaver 7.1 with SAP NetWeaver CE 7.1 SP3 for Oracle - 51032969\DATA_UNITS\CE71_03_IM_WIN_X86_64_ORA\sapinst.exe
           - normal installation + JavaEE + CompEnv
              - Media Browser - RDBMS Client Oracle : Oracle 10.2 Client - 51033272\OCL_WINDOWS_I386\LABEL.ASC
    ===> *PB* : at this point of the sap installation, I got an error "Oracle Software not installed" without any details. I didn't find any help on that either. It seems to come from a registry key missing...
    After that, I uninstalled (with removal of the right keys in the registry to have something clean (<a href="http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/deinstall.htm">url</a>)) Oracle many times and tried different installation steps : without the patches, with the patches but without the update (doesn't work), with the patch 15, with the patch 16. In each cases Oracle service wasn't working if a patch was installed. And in each cases the sap installation never detected an Oracle installation. This installation steps are very reproductibles and are problemful.
    Could anybody have some pointers or help on that one ?
    Thanks in advance,
    Florian

    Hello Friends,
    I tried the AMD64 based Installation Source to install Oracle 10g. and It works.
    I also applied sufficient patches (AMD64/x86_64 based) to Oracle, as required. It worked fine, without giving that "Platform not compatible" error, as it was giving me before.
    Now,I have got that , my machine was expecting x86_64 based Installation of Oracle .
    I was little bit confused between x86, x64, x84_64, I386,etc..etc..terms...
    Thanks to Markus and other friends.
    The problem was due to mix installation of 32bit +  64bit Oracle Software & Patches. Previously, i installed  i386 based Oracle, which is 32 bit version. Then i tried AMD64 based Installation source of Oracle RDBMS. It workes.
    Previously, I was applying x86_64 based Oracle patches 16 & 17 on 32-bit Oracle version, thats why definitely it was giving error of "Platform not compatible", because it was expecting 64Bit Oracle version to implement that patch.
    But, now, i successfully applied these two required Oracle 10.0.2.0 patches(16 & 17),on this 64Bit Oracle. (AMD64 based Installation source).
    Then, I had run SAPInst of Installation Master (Win_x86_64) and started the Installation again. I also gave Oracle RDBMS Client Source location (x86_64 based). Then, also provided other required parameters. Now, the SAPInst worked fine, without that "Oracle Software not Installed" error.
    And, Ultimately I successfully installed the SAP NetWeaver CE 7.1 on 64Bit Oracle 10g Database Software. Right now, the Server is working fine, without Errors.
    Thanks Again.....

  • Software not installed correctly to communicate with ipod/iphone. This message appears when itunes is opened

    software not installed correctly to communicate with ipod/iphone. please install again

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Error message is showing while connecting to itunes - "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit  version of itunes - Pls Help

    I tried to install in my Sony Vaio Laptop - Model Name SVF15218SGW Serial No 54****************954. After installation of itunes, when i am trying to connect error message is showing as follows -
    "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit  version of itunes".
    i already installed 64bit version. but not connecting my iphone with itunes
    PLEASE HELP.!!!!
    <Personal Information Edited by Host>

    Hello Negaz
    When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • WAE 674 Disk based software not installed.

    Hi,
    Have an WAE 674 with 4.4.3c installed, with problem.
    Using WCCP and I am able to logon to the device.
    Have this msg and in in the CM it is down.
    System Initialization Finished.
    Disk based software not installed.
    Some applications may not run correctly!
    Any sugestion?
    I have reload still problem.
    Regards Jan Rockstedt

    What steps did you take to resolve the issue? I have the same issue on WAVE 594 running 4.4.5.
    I get the error message when I telnet into device.

  • Software not installed correctly to communicate with ipod -Tryed evrything

    Hello i am geting the "Software not installed correctly to communicate with ipod" error. I tryed everything on http://docs.info.apple.com/article.html?artnum=93716 nothing worked. I need help for a fix. I was having error 2095 before then i fixed it. Now im having this problem
    Ipod: 30 gig video
    Computer: HP a1112n

    Itunes ver: 6.0.2.23
    that rules out one set of possibilities.
    okay, we'd better check on the following two possibilities then. (the second one has shown up in itunes 6.0.0.18, 6.0.1.3 and 6.0.4.2, so it's a live possibility with a 6.0.2.23.)
    The Tick 247: iTunes not recognizing your nano? Here's a possible solution!
    markinmadison: Re: "The software required for communicating with the iPod is not installed..."
    love, b

  • Ipod software not installed itunes

    when i run itunes i get the error message software not installed...
    I can't seem to find the answer to this problem however i remember two posts that solved it
    one told how to remove tunes thuroughly
    the other used Start..Run to close a few things that itunes and the ipod used.
    I need an answer and am onedering if anybody could find one of these two posts or give me an answer of their own

    Its ok i found it

  • XtremeGamer Pro + Drive Upgrade Kit = No sound after reboot (please he

    First, lemmie say I saw the sticky at the top of this page for digital i/o. After reading the thread, the fix doesn't work for vista and I see that it says you just have to enable digial i/o from the control panel. Since, I have already tried this ... I am asking for help.
    Bought an X-Fi XtremeGamer card about 6 months ago and everything has been working fine. However, I recently converted the PC it was in into an HTPC. Since I have a surround system, it seemed my only option to go with a dri've upgrade kit or have to rebuy a new sound card (wanted 7. surround via coaxial/optical).
    Long story short, everything installed fine yet everytime I reboot the computer I lose sound. If I go into the diagnostic software included by Creative, all the test come back fine but at the last test where it actually test the speakers I get no sound. Selecting to restore defaults brings the sound back just fine. No other "restore default" command actually restores sound accept the one in diagnostics.
    If I reboot immediately after running the diagnostics/getting my sound back, I still come back into Windows without sound. So, it isn't anything I am tweaking that is causing sound loss.
    Currently my PC specs are as follows:
    Windows Vista
    XteremeGamer Pro
    Dri've Upgrade Kit
    Intel Core 2 Duo E6600 Conroe 2.4GHz (OC - 3.3GHz)
    Crucial Ballistix 2GB Ram
    GeForce 8800GTS 320MB
    eVGA NVIDIA nForce 680i SLI ATX Intel Motherboard
    Audio system:
    SLS Audio Q-Line Gold 5. Surround
    Connecting using coaxial right now, have not tried optical to see if that solves the problem though. Going to do that when I get home tonight.
    I completely uninstalled all the creative software and reinstalled using the CD that came with the dri've upgrade kit. I also ran the auto update and it installed the latest drivers.
    Dunno if it matters but it sees my card, with the upgrade kit, as a Sound Blaster X-Fi Platinum Fatalty Champion Series.
    Any suggestions/help?
    Thanks

    Called Creative support and they were just as helpful as these boards. To all who read this, stay away from Creative till they get their act back together. Leading in computer audio my butt, more like leading in customer dissatisfaction and poor support.

  • X-Fi I/O Drive Upgrade Kit and the Headphone Out j

    I would?need an extra analog audio out for my new HDTV since I don't have an HDMI-out on my PC and the audio out's on my soundcard are reserved for 7. speakers. I thought the X-Fi I/O Dri've Upgrade Kit might be my solutions since it has an extra headphone out. I have an X-Fi XtremeMusic card and my new telly has L/R-RCA audio ins.
    My question is does connectin headphone jack to the X-Fi I/O Dri've mute all other sounds? I would like to be able to use both my S750 speakers connected to the PC and the HDTV speakers connected to the X-Fi I/O Dri've's Headphone?Out?at the same time.
    And one extra?question:?Do the headphone out on the I/O dri've introduce dedicated left/rigt channels including all the sound information from the source file being played, or just the left/right channel information as in 7. mode when the soundspectrum is divided between all the eight speakers and when the front left/right channels do not contain all the information? It's a bit tricky to try put into words what I mean, but I hope you can understand.
    Thanks for any and all replies!

    You can enable/disable the muting on jack input detection.
    As for the output, I think it outputs the front left and right, so you would need to switch to headphone mode in order for it to be stereo only. However, the dri've also has digital out and from what I understand, that only outputs in stereo unless it's using a surround sound source such as a DVD, but I could be wrong.

  • I/O Drive Upgrade Kit - only headphone/mic work!

    ?<img height="300" src="http://ecx.images-amazon.com/images/I/5ODGMPRp7L._SL500_AA300_.jpg[/img] width="300">
    My card is a? PCIX X-Fi Titanium Fatalty Pro Series.
    The upgrade kit is a Sound Blaster X-Fi Titanium Fatalty I/O Dri've Upgrade Kit
    I have one of those and I cant get anything other than the headphone/mic jacks to work.
    The volume control and the 3 buttons do not work (buttons do not light up).
    I thought it might be the cables, so I paid $5 to get replacement cables sent to me from the RMA dept and they still do not work.
    Apparently, this issue is pretty widespread, but nobody seems to have a solutions.
    Here's a thread [url="http://www.tomshardware.com/forum/2524-28-dri've-sound-card-half-working-help" rel="nofollow">from tomshardware[/url] with the same issue, yet no solutions.
    DOES ANYONE HAVE A FIX?

    Corpx
    Please refer to <a rel="nofollow" href="http://support.creative.com/kb/showarticle.aspx?sid=56793]this article[/url] and ensure that the cables are fully seated in the connectors. If this is still not working for you, it would be advisable to get in touch with our <a rel="nofollow" href="http://support.creative.com/contact/emailform.aspx]Customer Support[/url] for further assistance.

  • I/O drive upgrade kit - X-fi xtreme gamer

    Hello I bought a?set of headphones but I need to get something practical to make life easyer?to connect them when I want to use them. I thought of the I/O upgrade kit but as far as I can tell there isn't one compatible for my Soundcard. I have this one > http://www.soundblaster.com/products...8&product=5854?Thanks.

    Hi,
    I'm wondering if it's possible to use an X-Fi I/O dri've from another SKU X-Fi with a Fatalty Xtreme Gamer?
    I've plugged it in and it's powered, output digital audio (the light is on, at least) and it detects the headphones being plugged in properly but no sound is coming out.
    Am I doing something wrong?
    Cheers,

  • SB X-Fi Titanium I/O Drive Upgrade Kit ?

    Is there availability of the I/O dri've upgrade kit for the Sound Blaster X-Fi Titanium in the United States? I don't see it in the online shop, is there any ETA for this product? What's the expected pricing? Thanks.
    http://www.soundblaster.com/products/product.asp?category=&subcategory=6&product=8288
    Message Edited by Strife on 02-8-2009 05:44 [email protected]

    If Creative doesn't want to help you, take your money and spend it someplace else. If you have a Radio Shack store in your town, take the old cable(s) there, and ask them if they can repair them for you. Or, if you don't have the originals any more, take your hardware and/or instuctions into the store and ask them if they can make some custom cables with the info you've got on hand. My local Radio Shack has made custom cables for the CNC lathes where I work; They've made power cables for assorted electronics that I'd lost the power cables for; They've made replacement automoti've wire segments for some of my auto projects, using some really terrible drawings that I made.
    Hope that hel
    ps.

  • Portege M750 - PCI controller software not installed on Windows 7 64bit

    Hi, had an upgraded SSD for my machine so decided to do a fresh install of Windows 7 64bit and now I have and error saying PCI controller software is not installed, tried windows update no luck - any ideas please?
    Thanks, Peter

    OK cool advice - thanks it is from Intel and is
    0x2A44 Chip Number: Mobile 4 Series Chipset
    Chip Description: Intel Management Engine Interface
    Notes: ftp://ftp.vaio-link.com/PUB/VAIO/ORIGINAL/ME DRIVER INTEL 4.0A _ 4.0.0.1105.ZIP
    Downloaded, installed and working - thanks for the quick advice!
    Peter

Maybe you are looking for