X-Fi Loses Settings-- doesn't remember th
I have a brand new Dell with an X-Fi, and it refuses to remember the settings after each reboot. It always goes back to "entertainment mode" and 4., when I want it to stay in "game mode" and 5.-- it also wipes out my THX settings, etc.
Any help would be appreciated.
I just checked, nothing is disabled. I've even uninstalled and reinstalled, and the problem still occurs. This is literally a brand new Dell, I just got it.
Similar Messages
-
Since updating to 3.6.15 today, back button no longer works and FF doesn't remember URLs
Since updating to 3.6.15 today, back button no longer works and FF doesn't remember URLs. Not just that memory of previous URLs got wiped out, it still doesn't remember the ones I've typed in since I updated. And No back button, it's really hard to use.
I went thru all the settings and could not find a way to fix this problem. What is up? I've never had this happen in any version of IE, FF, or Chrome.
Can I get back previous version? Until then, it's Chrome and IE for me.
I'll be happy to delete any plug-ins if it will make this problem go away.
THANKS in advance!Thanks. This didn't solve te problem but it seemed to have solved itself. all of a sudden it started working properly, without me even closing FF and starting it up again. Thanks Cor-el, if it happens again I'll try your solution.
-
USB flash disk is not mounting, Xfce doesn't remember the setting
Hello,
I'm new in Archlinux and I think I can't set up it well. I use Linux for four years /Ubuntu, Debian/.
Now I have installed system with X server, Slim and Xfce.
1/ I have one big problem. I want to automount my flashdisk but it doesn't work like in Debian. I don't know what is wrong. When I put my flashdisk to USB, it's blinkig but nothing else happened. But I see the flashdisk in lsusb
[root@arch martin]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 04d9:048e Holtek Semiconductor, Inc. Optical Mouse
Bus 001 Device 003: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0/HT203
2/ Xfce doesn't remember the settings... When I log out and log in again, the panel, desktop and keyboard have the default settings all the time.
3/ All is in english. I'm from Czech Republic /excuse my bad english/ and I want to have applications in czech language. I've set up and generated locales but nothing happened...
Thank you a lot to solve those problems!!
Some files...
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="cs_CZ.utf8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Prague"
KEYMAP="cz-qwertz"
CONSOLEFONT="lat2-16"
CONSOLEMAP="8859-2"
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(nvidia)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="arch"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
#interface=eth0
#address=192.168.0.2
#netmask=255.255.255.0
#broadcast=192.168.0.255
#gateway=192.168.0.1
# DHCP example
interface=eth0
address=
netmask=
gateway=
#interface=
#address=
#netmask=
#broadcast=
#gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus udev evdev network netfs crond slim)
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
/etc/X11/xinit/xinitrc
#!/bin/sh
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# start some nice programs
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
for f in /etc/X11/xinit/xinitrc.d/* ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
#twm &
#xclock -geometry 50x50-1+1 &
#xterm -geometry 80x50+494+51 &
#xterm -geometry 80x20+494-0 &
#exec xterm -geometry 80x66+0+0 -name login
exec ck-launch-session startxfce4
/etc/slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
#login_cmd exec /bin/bash -login ~/.xinitrc %session
login_cmd exec ck-launch-session startxfce4
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user martin
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
#current_theme default
current_theme archlinux-darch-white
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
locale -a
[root@arch martin]# locale -a
C
POSIX
cs_CZ.utf8
en_US
en_US.iso88591
en_US.utf8
Last edited by Zelva (2011-09-05 18:19:15)With xfce4 I use .....mount /dev/sd(xx) /mnt/md...
Setup .../mnt/md in /mnt with ..cd /mnt...mkdir /mnt/md
This will mount the flash drive.
I do not know automount for xfce4. -
My MBP doesn't remember my Time Capsule wireless network when waking from sleep
My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep. Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password. This is very cumbersome. And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem.
It appears that this problem has to do with the hidden SSID. I don't need the lecture on how hidden SSID provides no serious security benefit. That's why I have the WPA2 encryption. I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
Solutions I've alread tried:
1. Open Network Preferences
2. Select Airport from left hand column (and ensure Airport is at top of that list)
3. Select Advanced
4. Delete all Preferred Networks.
5. Apply settings.
6. Restart computer
7. Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
This solution works fine as long as I don't take my computer elsewhere and connect to another network. As soon as my preferred networks list gets another network, my MBP stops finding my TC network. Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network." Thus, I assume the problem lies with the Time Capsule.
Any ideas?LaPastenague, thanks for weighing in. Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently. With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
When an SSID is hidden, the base station does not broadcast its identification. Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality? Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP? And once broadcast by the MBP, the TC should detect and reply?
Basically, the MBP can connect to the hidden TC manually just fine. The MBP can connect to the old setup automatically just fine. The MBP cannot connect to the TC automatically. Aren't these automatic connection functions solely on the MBP?
I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
Z -
Labels not working...bridge doesn't remember labels
Adobe Bridge doesn't remember labels in CS4 in two computers...both Vista?
You could look at it another way. Make your settings and folder selection then use file/exit.
Then no matter how you close it in future, or where you are at, it will open at your default setting.
Be aware however that it is always running in the background and must be closed to install updates. -
Gnome-shell doesn't remember favorite application
Hi all,
since some time gnome-shell doesn't remember the favourite application. When I'm pressing the super-key and start typing for example "F", it should select Firefox immediately, but it's always searching in the standard list instead. I already googled it, but i couldn't find anything to help me. Any ideas?
kernel: 2.6.38-ARCH
gnome-shell: 3.0.2-1
thanks!
Last edited by hooch (2011-06-05 11:14:04)Hmm, since yesterday I'm fumbling around with those settings too. It seems this is not settings related at all (at least not to old package settings), but rather to nautilus' behavior. Just a few minutes ago I've set "view all hidden files" to true in it's settings. It instantly crashed. After a reboot gnome-shell is gone. This is really annoying.
Also there is no taskbar, no menu bar, no nothing in fallback mode!... Is this even fallback mode?
Trying to launch gnome-shell from terminal then gives:
Window manager warning: Screen 0 on display ":0" already has a window manager; try using the --replace option to replace the current window manager.
with replace option:
Window manager warning: Log level 16: Another compositing manager is running on screen 0
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Window manager warning: Log level 8: meta_compositor_sync_window_geometry: assertion `info' failed
Window manager warning: Log level 8: add_win: assertion `info != NULL' failed
Segmentation fault
Compiz is gone already. What could be causing this issue? -
Xperia Z3 doesn't remember Wifi
Hey everyone!
I just got the new Xperia Z3 and while I find it to be a gorgeous phone, it has lots of software issues.
One of those is the fact that it doesn't remember Wifi networks anymore. I have to re-select the network and re-enter the password every time. Does anyone know a solution or should I return the phone?
I have read that removing all remembered Wifi networks helps, but this solution is unacceptable to me as I travel a lot and have over a hundred networks remembered in my Google account. I'd rather stop buying Sony products than have to re-enter those networks again.
Thank you!@chickideee
Sorry to hear that you have this issue as well.
Would it be possible for you to take a report from the phone when this happens and send it to me?
First you need to enable the developer options menu. To do this, go to Settings -> About phone and tap the build number 7 times.
When this happens the next time, go to Settings -> Developer options -> Take bug report -> Report. When a report has been created (it may take a little while) you will get a notification. Tap this to share it to for example Google drive and then send me a PM here on the forum.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network". I have "ticked" the "remember password" box. I´m connecting to a wireless network on an regular Speedtouch router at home. I´m new to Mackintosh.
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.) -
Noticed a strange behaviour in Safari 6 on Mountain Lion.
When I close the window by clicking the red x in the top left and then re-open, Safari comes up with a blank pages, it doesn't remember any of the tabs I had open.
If however I close it by clicking quit on the Safari dock icon and then re-open, Safari opens back up with all my tabs from the last session.
This doesn't seem right, any advice?When you quit Safari, (Mountain) Lion's Resume feature will remember what pages you had open and reopen them the next time you start Safari, because that's what the feature is supposed to do.
But when you close Safari's window—not by quitting, but by clicking the red button—(Mountain) Lion assumes that you don't want to see all those window's tabs again. (That's why you closed the window.) So it doesn't restore them when you open a new window.
You should get into the habit of quitting Safari when you want to stop using it, but might want to resume where you left off later. Really, the same goes for all other Apple apps. Closing a window tells the app and the OS, "I don't want this file/page/whatever to be open anymore." On the other hand, quitting the app tells the OS, "I don't want to use this app right now, but I might use it again later, and please reopen the same files/pages/whatever the next time."
By the way, the easiest way to quit an app is to press ⌘Q. -
I bought a used ipad on ebay and the icloud acct is still linked to the old owner who doesn't remember the acct information. How can I set up my apple id on the iPad?
You will need the previous owner's Apple ID and Password to:
1. Turn off Find My iPhone
2. Erase device
3. Reactivate device -
Hey guys I got a used iBook from a family friend that has it password protected.I can't update or delete programs or download anything without the passwords and he doesn't remember them.Is there any way for me to get around these without wiping the computer and starting from scratch?
Hello,
Sadly without the system disk you can't do a lot. I would suggest you enable root user, log in as root and reset your administrators password, however you can't without knowing the administrator password first.
The only solution would be is to obtain the correct system disk or buy a retail copy of Mac OS X. But note, it depends on what version of the iBook you own depends, on what version of Mac OS X you will require.
You can still obtain the system disk or retail disks from online vendors, but they come at a cost.
System disk are grey in color, while retail disk have a big 'X' on it.
Best of luck -
Preview doesn't remember the last page opened
I have noticed that Preview doesn't remember the last page of the PDF documents after 30 mins of usage (or opening up several PDF files). Is there any way to make Preview always remember the last page of files irrespective of time the file was last used and number of PDF files opened? I think in SL-ML era this was probably the case but since Mavericks it seems to have changed.
Deleting "browser.download.lastDir" makes firefox unusable.
It's very annoying. I'm sick of the update to 3.6. It's getting worse with each minor update.
Hour after hour researching about this odd behavior sucks! -
HT201304 don't know the password. My granddaughter put it in now she doesn't remember it.
My granddaughter put a password in now she doesn't remember it. How do I reset the password.
If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
Imac clock needs to be set and bluetooth doesn't remember ethernet connection
My Imac is less than 2 years old. Upon startup, I am getting the error message "You computer's clock is set to a date before Jan 1, 2008. This may cause some applications to behave erratically." It also doesn't remember which ethernet connection it had last in the bluetooth menu. I have to choose it everytime. What's wrong with my mac? Is it the battery? If so, why is this happening now when I've only owned the machine (purchased brand new) less than 2 years? Could it be something else?
I HAD this problem with my Power Mac G5. The "before date" was different and my date and time were correct in the menu bar! The message appeared on December 16, 2011 and on January 16, 2012. Then on January 21 I pressed the button to turn the g5 on. The light came on then went out. SILENCE. I tried again but NOTHING. I didn't do the SMU thing as I assumed it was the power supply which I had allready replaced once (in about 2007). I hope it wasn't just a battery, because I had the hard drive put in a cradle and am about to gut the G5 so I can use that beautiful case for something else! Did you ever figure it out?
-
Ipod touch 2g doesn't remember web fields
hi there,
after upgrading my ipod touch 2g to ios 4.0, it doesn't remember my login and passwords on any pages,,,, i have to type them all the time when i come back on the page. it was working just fine before upgrade,,,
i tried to disable and enable this option, and clear the history, on/off and etc..
any ideas how fix it?I have the same problem and I'm going to file a bug report in a second.
Maybe you are looking for
-
Error when releasing a transport
Hello experts, I am getting an error when releasing a transport. The error message is telling me that Object DTPA DTP_009C8T81IIB6H4UFC7FQUVRFL was set to 'inactive' The detailed error message isnt very helpful. The performance assistant gives the
-
Back up and restore of external hard drive?
My very first back up seems to have saved my external hdd content. If I restore from this backup, will it write over all the data I currently have on that same disc? I have tonnes of downloaded content on the external hdd which I don't want to lose.
-
I searched for solutions and they all said to delete everything and anything that has to do with my iTunes off my computer and to reinstall iTunes. They all also saud that my backups will still be intacked but im still not sure. Help?!
-
Is it possible to create a custom component or function in Flash 8 that performes a set of complex animation features but that can be hidden from the user such that they can distribute or modify that code. Example I to license a custom animation tool
-
Problem in currency conversion rate
Dear Experts, I'm facing a problem in client place , here when the Sales invoice is posted it shows wrong currency conversion rate, whearas In excise invoice its showing correct conversion rate which I maintained at OB08. In