[X-fi] Missing Gameport in hardware device manag
Hi to all! (excuse my bad english...)
I have a X-fi ExtremeMusic (I upgraded from a SB Audigy 2 ZS)
... I've noticed that, after the installation, the peripheral "Creative Gameport" is no more showed!!!
What can I do for "reactivating" the gameport?!?!
I tried to unistall (with drivercleaner) and then reinstall the drivers, without success!
Thanx! ;-)
OMG!... yep... windows doesn't show the gameport, because the port isn't a gameport!! :-p
Ufff... my old A2 ZS had Firewire and gameport!... and now?!?!... wait! Perhaps my Asus P4c800-e has a gameport device... I should look at...
Thanx anyway!
Similar Messages
-
Thinkpad S430 missing SM Driver in device manager
I upgraded my S430 hard drive to an SSDMy operating system is Windows 8.1 Pro 64 bitI took a screenshot of my Windows device manager before upgrading the hard drive and it had no unknown devices and included one device called "SM Driver"Now after upgrade I have one unknown "PCI Device" with an exclamation mark and no device called "SM Driver"I have installed this Chipset driver and it has not resolved the problem http://support.lenovo.com/us/en/downloads/ds032281
Welcome to the forum!
I believe that it's the wireless card that your missing.
Could you please post the 7-character model number found on the sticker on the bottom of your ThinkPad?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Bluetooth radio missing, not found in device manager - Probook 4530s
I have a Probook 4530s with Windows 7 Ultimate, 64-bit installed on it. A little while ago I wanted to use bluetooth for networking, but thee was no bluetooth adapter in the Network Connections window. I looked in Device Manager next, thinking maybe there was something wrong with the driver, but no bluetooth adapter showed. I've tried rebooting, turning it off and on in BIOS, and even just pressing the wireless button, but nothing has worked.
Along with Windows, I have Mac and Ubuntu installed. Bluetooth dooesn't work on any of the operating systems, but it used to.
Any help with getting my adapter working again would be appreciated.Hi,
Its more than likely Ubuntu that has caused the problem. I can't say for sure though as I've never used the model of laptop you have. With the WiFi/Bluetooth portion of the hardware its not just a driver that keeps the hardware running correctly, there is a firmware as well. I managed to kill my WiFi card for a while when I was messing with Linux OS's. Find out the precise model of the bluetooth adapter on your laptop (it may be a WiFi/Bluetooth combo card?) then start searching the Linux communities for information about the firmware for the cards.
Sorry I can't be more helpful.
DCampbell -
Device Manager displayed " Mass Storage Controller (Code 28)"
Greetings to all Members
I am using AMD 64 x2 3800+ processor. MSI mortherboard K8N Diamond. Graphic cards, two units, Geforce GTX6600GT. I am running on Window XP SP2. I have also updated the AMD latest drivers.
I noticed each time I log on the computer, the computer would prompt "New Mass Storage Hardware Found" and prompt the wizard to install new found hardware.
I went to device manager and noticed the device status display "This drivers for this device are not installed (Code 28). I have also carry out all the steps as suggested from the device manager menu. Mass Storage Controller location is: PCI Slot 9 (PCI 3, device 0, function 0 is displayed at the Mass Storage Controller Display. The device Instance ID display "PCI\VEN_1095&DEV_3132&SUBSYS_710A1462&REV_01\4&14AECDBO&0&0060.
Try update driver option but to no success. Have all the driver systems (in the CD) that came together with the system installed as well. Again to no success in resoluting the problem.
To my horror after installing the drivers that I have downloaded from MSI website for the said board.
I notice the Virtual drive program failed to initialize.and the following messages were displayed during the installation of the website drivers for the said mortherboard:
There was a problem installing this hardware
Mass Storage Controller
An error occured during the installation of the device. The name is already in use as either a service or a service display name.
Can someone please help me to resolve this problem? Any suggestion or advise would be sincerelt appreciated.
Best Regards
Harry
Can someone please assist and provide me with some guidelines to resolve this problem.Hi Bas
I manage to remove the yellow exclamation mark from the hardware, device manager by setting the Integrated Peripherals on Board Sil3132 mode from Sata to Raid.
The Sata and Raid controllers is displayed and upon opening it up further, I noticed the following controllers are displayed:
1 ) FarStone CDAWDM2001 SCSI Host Adapter.
2) Silicon Image SIL3132 SataRaid Controller.
Do you think I have set the right thing? Your kind opinion on this. I am using BIOS version used is 1.A
Thanks
Best Regards
Harry -
i just put in a kenwood 72x true x cdrom drive. when i right click my computer, properties, hardware, device manager, nothing is there, just a white screen. how is this possible and why? what can i do to fix it?
i have a p4 2.4c
1gb ram
ati radeon 9700 pro
sony 510 dvdrw master
sata drive master
normal drive master
now kenwood 72x truex cdrom slave on same cable as sony dvdrw drive.
msi mobo 865pe neo 2 fis2r bios 1.9
win xp pro sp1 all updatesJarico, I don't really have *any* legacy hardware do i? I mean the pc only has a dvdrw and so on, nothing old. Or did you mean something else?
I can increase system restore to use say 10gb maybe, but don't see any point from my past experience in that I haven't needed it ever untill maybe now.
However I did find the problem with nothing working on the dvdrw sony 510 model was that somehow in hooking up my kenwood 72x i broke the cable. I went into the bios and it didn't even have the right name for the sony drive. it was really messed up. so i used another cable and it works now. i am not using the kenwood tho, it is not hooked up. so it is possible breaking the cable messed up the device manager. i know right now that i must re install windows to fix the device manager. unless someone has another suggestion. i am backing up a couple dvd's right now with dvdxcopy and when done, i plan to repair install with windows first and if that does not help, reformat and reinstall, starting completely over, :( -
G500 dedicated AMD Radeon card missing in device manager
Greetings to all,
I've got Lenovo G500 laptop (i5, 6GB RAM, Intel HD4000 + ATI Radeon 8750HD, Win 8.1) and I am experiencing a serious problem. Yesterday my laptop suddenly freezed during watching a TV show and I was forced to restart it. After restart I received a message, that AMD Catalyst and hydravision doesn't work properly and I should reinstall drivers. So I did but after that, nothing worked properly and my radeon card was missing in device manager, just intel HD was present. I've read throughout this whole forum and I couldn't find a solution; I've tried everything, reinstallation of all drivers, both AMD and Intel, I've tried installation of older drivers, then newer, I've tried to check BIOS, where it all seemed all right (switchable graphics were enabled) and as last option I've reinstalled whole system - back to the factory settings. But my AMD Radeon card is still not present in the system, it seems like it was not ever there. I've tried to find it via that app which finds any hardware, but without any positive result. When I try to run catalyst center, it says "can't run catalyst, no actual settings which could be configured by catalyst control center". I've tried to play various games (far cry 3, mass effect 2, metro redux) with positive outcome, it runs the same way as it did before, but!! - I've got this feeling it always ran on intel hd card...As many others, since the beginning of my laptop purchase I had that problem where everything runs on integrated card instead on the dedicated, but I did not pay much attention to it, since it worked smoothly anyway. I'm not hardcore gamer, or a gamer at all anyway.....so to sum everything up, I think my radeon card is burned or damaged somehow and it didn't work since the very beginning. But still, I would love to get more professional opinion, because it is simply weird, it is missing in device manager. And one more thing, everytime I close the screen end reopen it later, system freezes or something doesn't work or some other inconvenience, leading to forced restart of the system. I thought it's caused by Win 8, because, honestly, that system sucks, but right now I think it's got something to do with that video card problem.
Thanks in advance and have a nice day ;-)The NIC is defective... As far as Windows is concerned there is no NIC so the driver will not install.
Motherboard replacement is a bit extreme for just a broken NIC. Its possible to get a USB to Ethernet cable:
http://www.amazon.co.uk/dp/B00484IEJS/ref=pd_lpo_sbs_dp_ss_1/276-0277278-5353446?pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=lpo-top-stripe&pf_rd_r=1MVJEEYPJ5HJ9KP016WC&pf_rd_t=201&pf_rd_p=569136327&pf_rd_i=B006R665RS -
my webcam in my Dell Inspiron 3521 was working fine with Windows 8. After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is missing in the Device Manager. how can I get the Webcam back?
thank you very much.I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
The Dell Update utility will recommend drivers that are needed specific to your model.
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
Good luck!
bill
Regards, Bill Moore @BMooreAtDell -
Satellite Pro L300: WLAN is not in device manager and is missing
Hi,
I have a Toshiba L300 which I downgraded from Vista to WXP months ago. So I decided to stick with Vista and when I installed Vista the WLAN was missing in device manger and it didn't work. I tried downloading drivers adapters from Toshiba drivers download and still didn't work. Only my Ethernet is showing in device manager....btw I have a Realtek WLAN
Also,my VGA graphics card doesn't seem to update driver and when it does it says that the system is below minimum specs.
It's soo weird in WXP it was working fine..... Any solutions?>I tried downloading drivers adapters from Toshiba drivers download and still didn't work.
What does it mean exactly? Have you installed WLAN driver or not? Is WLAN card installed properly and listed in device manager as Realtek WLAN card?
How to understand you?
Have you problems to install WLAN card or to configure WLAN connection?
If the WLAN card is installed properly enable the card with WLAN switch and then use FN+F8 key combination and be sure card is set to ON.
Which display driver you want to install? Which version? -
Windows 8.1 Bluetooth missing from Device Manager
It appears after the latest round of windows automatic updates my native bluetooth device went missing. It is not visable in the device manager or the control panel settings. I have downloaded and reinstalled the latest wireless and bluetooth drivers, however I am still unable to view the device. This is a Yoga Pro 2 (64bit) running the most current Windows 8.1 updates. The latop has a native bluetooth adaptor which had been working with no issues. I have run services.msc and restarted the associated BT services and they are running. Would appreciate any help.
Are these the drivers that you updated?
http://support.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-pro-lenovo/download...
Have you also updated your BIOS
http://support.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-pro-lenovo/download...
Please do read the README instructions before updating BIOS.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!! -
HP Pavilion dv3 - LAN device missing from device manager
This problem started between noon and 3:00 PM on Friday 2/18. My Realtek PCIe GBE Family Controller device, which allows me to connect to the Internet via Ethernet cable, stopped appearing in the Device Manager window. Furthermore, the only place where my computer can find the device is in MSInfo32.exe
Name [00000007] Realtek PCIe GBE Family Controller
Adapter Type Not Available
Product Type Realtek PCIe GBE Family Controller
Installed Yes
PNP Device ID Not Available
Last Reset 2/18/2011 5:30 PM
Index 7
Service Name RTL8167
IP Address Not Available
IP Subnet Not Available
Default IP Gateway Not Available
DHCP Enabled Yes
DHCP Server Not Available
DHCP Lease Expires Not Available
DHCP Lease Obtained Not Available
MAC Address Not Available
***NOTE*** The Driver line was NOT FOUND in this entry, indicating that the driver is either missing or the system can no longer find it.
I am able to connect via wireless, though my signal strength with the nearest hotspot is 2 out of 5 bars at its best.
Could you send me a direct download link for the driver installation software that works best for my system? I have an HP Pavilion dv3-1075us machine running Windows 7 Home Premium x64. Processor is AMD Turion x2 64-bit.Hi,
this happened to me also.
Name [00000019] Realtek PCIe GBE Family Controller
Adapter Type Not Available
Product Type Realtek PCIe GBE Family Controller
Installed Yes
PNP Device ID Not Available
Last Reset 21-02-2012 14:18
Index 19
Service Name RTL8167
IP Address Not Available
IP Subnet Not Available
Default IP Gateway Not Available
DHCP Enabled Yes
DHCP Server Not Available
DHCP Lease Expires Not Available
DHCP Lease Obtained Not Available
MAC Address Not Available
My system is a HP Envy 14 - 1240ep. I'm using BIOS F.23, I tried F.26, but the BIOS update didn't solve the problem.
I tried Disabling the BIOS option for LAN sleep mode, but that disn't solve it neither.
I have a clean install of Win7 Pro 64-bits, and tried to install the original SwSetup NIC dirvers (however, since I've got the error for unplugged cable, I'm not sure if everything went ok).
My NIC is in "comma" for 2 weeks now. During the past 2-3 months it would work sometimes after the cable was plugged in for 3-4 hours. In spite of turning on it would go off after any stand-by, restart or shutdown.
I'm starting to get empty of ideas to crack this problem.
Any suggestion?
BR,
JQ -
My Cisco Prime Infrastructure ver. 1.2.1.12
Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
Please let me know how to access or enable the feature.
Thanks,
TekThis is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV.
Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware. -
Missing Imaging Device in Device Manager (can't use webcam)
I can't find Imaing Device in Device Manager. I can't use the camera because the driver is missing. Is there a url link to the download page? It's very complicated to find what I need on this website.
@jameshj ,
Hello and thank you for posting on the HP support forums. Here is the link for your systems only supported software and drivers.
P ENVY 17-j013cl Notebook PC Drivers
I hope this helps you. Thanks you again for posting.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
Missing Apple Mobile Device USB Driver Missing From My Device Manager
Hi Everyone, My Apple Mobile Device Usb Driver Does'nt Show up in my Device Manager. But when i go Control panel>> Admin Tools>> Services its there but when i go Start>>Run type in devmgmt.msc an the device manager comes up an under the heading Universal Control Bus Contoller the Apple mobile device usb driver is suppoed to appear but it doesnt all my other usb attached devices do how do i fix this problem?????
For what it's worth. I had the same problem, and here is how I fixed.
I downloaded Roxio Uninstaller and deleted everything Apple. Itunes, Bonjour, Apple Mobile Divce Manager, and Safari, everything get rid of it all. the good thing about roxio is that you can scan for anything that the program uninstaller missed.
Then I down loaded itunes again and Whalaa! It now works. -
Bluetooth is missing from device manager
As you can see that bluetooth is missing from device manager.I have also installed energy management but only wireless tab apppears.I m using windwos 8 pro 64 bit..
i have also tried to install windwos 7 bluetooth driver in compatabilty but it doesnt appear in device manager but after installing in compatability mode bluetooth appeared in PC SETTINGS-->>DEVICES.But it was grayed.
Please help me.Amanat,
you need to post your model number which can be found on the system itself, please see following link, or post the Lenovo part number. This will enable Shiva to check that your system should have Bluetooth; not all G470s have Bluetooth.
http://support.lenovo.com/en_GB/basic.page?DocID=HF003001
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
USB Host controller missing in device manager
Hello,
I've installed WIN 7 64 bit on my laptop; everything worked fine at the beginning; but after a couple of days, after a system update, all of the 4 USB ports stop working
In device manager there is no USB Host controller entry, and I have four device named "Multifunction device" marked in error
Already tried without success:
- update device driver autosearch online
- uninstall device and reboot; the system can't find proper drivers
- reinstall all drivers from HP driver update utility
- reinstall drivers with Intel driver update utility
- reinstall windows (no reformat)
- other driver search utilities
I can rule out an hardware problem because if I boot from CDROM or even usb keys, they work properly; given this fact, if I reformat the disk probably I could fix the problem I guess, but I prefer avoid this extreme solution, I use this laptop for my job and I have lot of customer network and VPN configured.
ThanksAfter following the Apple instructions on how to install Boot Camp on my MacBook, I had similar problems. I received the following non-functional driver list:
Bluetooth USB Host Controller
Coprocessor
Ethernet Controller
Network Controller
SM Bus Controller
Video Controller (VGA Compatible)
I tried running the repair feature from the OSX disc, no help. It may be noteworthy that I installed XP Professional SP3 straight off of an install disc, and did not do the following:
Install SP2
Install Boot Camp 2.1
Update to SP3
I am currently downloading Boot Camp 2.1 and hope that it will solve this problem. If anyone can help, please let me know!
Cedric
Maybe you are looking for
-
How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created? PROBLEM Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model). BAC
-
How can I connect to multiple routers in a homelab?
Hello guys, I have a little little situation here maybe someone can give me a good ideea how to doit. I have 7 routers that I use for my homelab, what I want is a way to connect to all of them without having to change all the time the console cable f
-
Using complex numbers in Fletcher Reeves optimization method
Hello, I would like to minimize a function of 4 complex variables with the Fletcher Reeves optimization method (Conjugate Gradient VI). Is it possible to do it with this VI or with HiQ4.5 ? (for S-parameters specialists) The purpose is to de-embed us
-
Webservices as datasource in OBIEE
How can we use Webservices as a datasource at RPD level in OBIEE?
-
Here is the text from Oracle download website. Oracle Database 10g Release 2 (10.2.0.2) Enterprise/Standard Edition for z/Linux What is "z" in z/Linux Thank you, smith