X-Fi Mixer App Probs with Multi Moni

Hello, I bought an X-Fi Fatality card, and I love it. There is only one issue with the software. I have 3 lcd screens in XP in multi-monitor configuration. Two DVI connected to a 7800GTX, and another on my other 7800GTX. When i'm not gaming, i'm not in SLI mode, and use the video cards for a tri-monitor setup. The mixer app (game, entertainment, creation) widget will not drag off the main screen. It looks like it WANTS to drag but once the app gets to the edge of the primary screen, it will not move any further and just flickers as you attempt to move it onto a secondary monitor.
Is there any ETA on fixing this? I want to have my mixer app open on a side monitor since I do most of my work on my main monitor fully maximized.
Also, can anyone really explain what the black module on the end of the card is with the light emblem? I heard it was a physical relay. I'd have a hard time believing it was there JUST for the light.

Having a similar problem, except mine will go to the other screen but not completely. The left edge stays on the right side of the screen of monitor #. If you try drag it further it snaps right back. I'm using nvidia fx5200 graphics card and latest drivers.Message Edited by fresh0 on 09-30-2005 05:36 AM

Similar Messages

App Model with Multi-Level Subdomains

Hello,
I understand that subdomains should not be used when setting up the App model to prevent unauthorized access of cookies, etc. Does this also apply to multi-level subdomains?
Our SharePoint looks like the following:
WebApp1.SharePoint.MyCompany.com
MySites.SharePoint.MyCompany.com
So, in essence our root domain is "SharePoint.MyCompany.com". Everything we build is a subdomain to that.
Would it be safe and in accordance with best practice, then, to do:
Apps.SharePointApps.MyCompany.com
That is a URL that is separate from the SharePoint subdomains, even though it is itself a subdomain of MyCompany.com. The TechNet guidance states: "For example, if the SharePoint sites are at Contoso.com, do not use Apps.Contoso.com. Instead use a unique
name such as Contoso-Apps.com."
Our SharePoint sites are at xxxxx.SharePoint.MyCompany.com, so is xxxxx.SharePointApps.MyCompany.com sufficient; or, do we still need to do the equivalent of xxxxx.MyCompanyApps.com?
Thank you,
Joseph Irvine

Hi,
I suggest you create a new top level domain name to end up with app URLs like [app].company-apps.com.
More information is here:
Understanding and Configuring App URLs in SharePoint 2013
http://blog.brianfarnhill.com/2013/06/Understanding-and-Configuring-App-URLs-in-SharePoint-2013
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Is there any downside mixing Objective-C with C++ for iOS apps?

I'd like to use C++ since it's fast and more dynamically in memory reference.
Is there any downside mixing Objective-C with C++ for iOS apps?
When googled for info, I only found tutorials about how to let xcode compile Objective-C with C++.
Thanks for help.

hokanst wrote:
Both Objective-C and C++ are (more or less) extensions of C.
C supports manipulation of pointers and casting of pointers, this implies that both Objective-C and C++ will be able to manipulate C data like arrays, structs ...
Objective-C has classes like NSData to read/write blocks of bytes from/to file and to access ranges of bytes when the data is loaded into memory.
C++ probably has similar classes (I'm not well versed in C++ so I don't know).
If you want to look into using C++ you will probably want to look at Objective-C++, the link below has links to docs on how to use C++ with Objective-C:
http://stackoverflow.com/questions/3684112/what-is-objective-c
Thanks for the info, NSData does what I need.
A replied in the link also mentioned that he's using C++ in his application too. As long as I'm aware of memory management (prevent memory leaks, etc) as @disguise said, it should be fine.
@etresoft indeed, but C is the base language of ObjC, there are ways to deal with.

LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.

Hello, LV 8.2.1 notes indicates the following bug fix:
43SAIR2A Fixed an issue where LabVIEW crashes when you run a VI that contains a mixed signal graph with a multi-plot cursor.
I am running this version, and still have this behavior. Is there anything I may be missing, and/or certain circumstances that may still be causing this?
thanks in advance,
Darren

Darren:
I looked at the CAR ID that you mentioned and the issue has been resolved in LabVIEW 8.2.1. To verify something similar, I ran the attached VI and things worked just fine. Please feel free to send me the steps to follow to reproduce the issue you are running into in 8.2.1.
Regards,
Rudi N.
Attachments:
MixedGraphs.vi ‏15 KB

I Was trying to update my apps, then i got an alert that said sign in required. I pressed continue, then it took me to my acct settings and it said there was a prob with my previous purchase and I havent purchased anything???

I Was trying to update my apps when i got a sign in required alert,
i signed in and it took me to my account settings ]it said there was a prob with a previous purchase and i havent purchased anything?

http://support.apple.com/kb/ht1808

Prob. with iTunes, Phone won't shut off. Tks.

3GS with 6.1.3 Prob. with iTunes. When I want to close out of iTunes after a Podcast the App will not close out when I hit Home. All other Apps shut down, only prob. is with iTunes. Cant turn phone off goes back ti iTunes when turned on again. Tks.

I hope the previous replies are wrong. It was my understanding that even when Match is turned off in iTunes, music previously matched or uploaded to iCloud will stay there, associated with my Apple ID, even through a cold boot etc. If you want to remove songs from iCloud, but keep them locally, do this:
1. Click "Store" in the iTunes top Menu
2. Select "Turn on iTunes Match" (if it isn't already turned on)
3. Close iTunes.
4. Hold down the Shift key while you open iTunes - this will prompt you to choose or create a (new, locally empty) Library in a different folder from your main Library.
5. Now you should see ONLY music that is stored in iCloud.
6. Delete them all. iTunes will show a checkbox or button for you to click to delete the selected items from iCloud.
7. Turn off iTunes Match (see #1)
8. Restart iTunes with the Shift key again, so you can get back to your main Library - with Match turned off.

So what exactly does limited to "one app" mean with a Pro account and the new prices?

So it seems Pro has dropped in price but it is now limited to "one App".
So what exactly does that "one App" mean?
Only one tablet version or one phone version for a certain title?
Or you can have a tablet & phone version including android & iOS for that one title?

I think that everyone received it just now…
Changes to Adobe Digital Publishing Suite, Professional Edition
Effective immediately, all customers who newly purchase or renew Digital Publishing Suite (DPS), Professional Edition, will be able to publish only one app per license of DPS Professional Edition.
Under this policy change, Professional Edition customers can publish an unlimited number of issues (.folio files) to a single app and distribute those issues based on purchased fulfillment bundles.
An app created with a single license of DPS Professional Edition can be distributed to any or all of the marketplaces that DPS supports, including the Apple App Store (and Newsstand), Google Play, Amazon Appstore, and the Windows Store.
In conjunction with this policy change, Adobe is reducing the price of a Professional Edition license to $4,800 USD annually (€3,600/¥480,000) or to $400 per month (€300/¥40,000) and will include 1,000 fulfillments annually. The number of fulfillments included with a monthly subscription remain unchanged.
This policy does not apply to test or demo apps published using Professional Edition. The one-app-per-license policy applies only to an app published to a supported marketplace(s).
If you are an agency, upon your renewal or purchase of Professional Edition, you can create only one app per Professional Edition license. If you have multiple clients for whom you are creating apps, either you as the agency or your client must purchase a Professional Edition license for each app published to a supported marketplace(s).
If you are an existing Professional Edition customer and choose to renew your Professional Edition license at the end of your annual agreement, these changes, including the lower price point and 1,000 fulfillments, apply at that time. These changes do not apply to your existing DPS Professional Edition agreement and take effect only if you renew your license.
DPS Professional Edition customers can continue to create unlimited Single Edition apps, which is unchanged under the new policy. A Single Edition app is defined as an app that includes one built-in or embedded folio.
If you expect to publish three or more apps annually, we encourage you to contact your local reseller to discuss pricing for a multi-year Enterprise Edition license.
Enterprise Edition offers additional functionality and benefits not available through Professional Edition. These include app customization, integration with back-end business systems, in-app marketing tools, targeted content based on user entitlement, and the ability to publish apps privately.

Good Gawd Can Someone Write A Mixer App For the Audigy2

What good is a soundcard without a decent **easily accessible** mixer app supporting ALL the inputs and outputs ...
And for cripes sakes when are you idiots going to learn **BASIC** audio procedures and NOT start the soundcard at full volume after an install? Do you turn your stereo at home up full blast and then turn on the power? Of course not .... There's nothing like "the Windows Sound" coming out full bore from my 400 Watt Klipsch setup at 2 in the morning ....

When you need software there are two places to go:
The Mac App Store which provides some user feedback, and
Macupdate which provides lots of feedback and also links to alternate similar software with ratings.
Peter
btw Mavis Beacon was originally a Mac application and is still for the Mac.

Best way to mix multiple songs with same template?

From what I gathered, I know I can save a particualar session as a "user" template, that way I can mix another song retaining all the same EQ, comp... etc, as well as arrange layout. Is this the best way to accomplish what I aim for? I've finished one song, now i am using a song from the same recording session, (same mic placement, and track assignment). Now, I want to start fresh with another song, using different effects and such, but I'd like to keep the same basic EQ and such.......
Let me know my Logic gifted friends!
-Mike

From the Manual 272:
Channel Strip Settings Menu
If you click on the word Insert on any channel strip, the Channel Strip Settings menu
opens. This menu allows you to load and save the entire routing configuration of a
single channel strip, including all loaded plug-ins and settings.
The ability to save an entire routing configuration can be used in a number of ways,
such as:
• Setting up and storing complex multi-effect configurations—on any type of channel.
• Similarly, the configuration of a particular routing configuration for use with multi-
output software instruments.
• Copying a routing or effect configuration between Projects.
• The rapid creation of new Templates.
The Channel Strip menu offers the following items:
• Next/Previous Channel Strip Setting: Loads the next or previous Channel Strip
Setting in the list.
• Copy/Paste Channel Strip Setting: Allows to you to copy and paste Channel Strip
Settings between channels or Projects.
• Save Channel Strip Setting as: Saves the Channel Strip Setting, and allows you to
name it.
• Once you have created one or more Channel Strip Settings, a list of settings will be
shown below the menu functions. The active Channel Strip Setting is denoted by a
bullet.
So it recalls all the inserts and settings in 1 convenient preset (as well as if the track is M or S) but where it is routed or sends info is not recalled - nor Pan or fader, though there is a gain plug.
J

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

Upgrading OA 11i from OA 10.7 with Multi-Instances Schemas

From an ORACLE Applications 10.7 with Multi-Instances Schemas (Mutiple Set Of Books Architecture : Schemas : APPS, APPS2, APPS3, PO, PO2, PO3, AP, AP2, AP3, AR, AR2, AR3,...), we want to upgrade toward an 11.5.1.
At the begin of the Step of AutoUpgrade, we have an error :
"Not able to process an MSOBA, you must pass in the Multi-Org Architecture."
Could you give me some informations about the way to resolve this problem :
* Do we must install and initialize the multi-Org in the 10.7 environment ?
* Can we process this point during the step of upgrading and how ?
* Do we have a bypass to this problem ?
Think you for your help !

Below are the points which I read for r11i migration.
a) MSOBA clients should migrate/convert to multi-org before migrating to 11i.
b) Autograde will fail, if it detects MSOBA.
c) Attachments and Workflow will not work in MSOBA.
For more details refer Oracle appsnet.
null

App update with application loader: bundle is invalid - CFBundleShortVersionString error

Hi,
A client of mine is trying to update their app. They created a new multi-issue viewer (using ver18).
When uploading this app with application loader they receive the following error:
"This bundle is invalid. The key CFBundleShortVersionString in the info.plist file must contain a higher version than that of the previously uploaded version".
(see screenshot)
When checking, the update app indeed had a lower version (iTunes) number than the one already on the app store. So I figured that was the issue, but when selecting a higher version and trying again the error still persists.
I couldn't really find anyone on the forum who previously had this issue.
Tips are always welcome
Thanks

Hi
I have the same problem, we built the first app for our client through WoodWing, now we want to update the app with the Adobe one. During the upload of the new app, created with the Adobe Viewer Builder we get this error code:
This bundle is invalid. The key CFBundleShortVersionString in the Info.plist file must contain a higher version than that of the previously uploaded version.
When we open the Info.plist we can see that the Adobe Viewer Builder creates 1.0.1 for the Bundle Version String short, while the older WoodWing app has 2.1.
Marketing version in Viewer Builder = Bundle Version String Short or ?
That means everybody who is changing from the WoodWing to the Adobe reader needs to go through Adobe?

What apps work with iOs 3.1.3?

What apps work with iOs 3.1.3? my friend just gave me her old ipod touch 1st generation and i am trying to find apps but like everythingggg is too old

Skype-08101284207.ipa
OperaMiniWebbrowser-071012123842.ipa
Facebook-071012123155.ipa
Dropbox-08101281032..ipa
PandoraRadio-12121295346.ipa v4.0.1 I live outside USA so I use the free US VPN tunnel (SecurityKISS.com free Plan GREEN 300 MB/day, setup VPN on iPhone as PPTP). See also the Internet Radio Box alternative below working without VPN.
eBay-071012123544.ipa
IMDbMovies&TV-071012124037.ipa
Adobe Photoshop Express
QuickOffice Connect v3.30
iPusher - To check if Push Notifications is working: [Solved] whited00r 6 Unlocked Push Notifications Quick Fix
Panoramatic360-08101282736..ipa - Stitch photos into panorama automatically.
AudioTools-1411121522219.ipa
LargeAperturePro
PhotoEditor-Fotoir
Catculator-141112152900.ipa
CyclemeterGPSCyclingComputer-071012195003.ipa
Dr.Xlator-MedicalSlang-141112154137.ipa
DoodleJump-091012140102.ipa
Geekbench2-08101281342.ipa
GetRunning(Couchto5K)-141112155955.ipa
Gramophone-141112160427.ipa
GuitarPlayerClassic-141112160521.ipa
HandWritingMail-061012153657.ipa
iAngleMeter-071012123403.ipa
NetStatus~remoteservermonitoring-061012153521.ipa
SiteSucker-221112230322.ipa
TempleRun-291012141909.ipa
Camera+-091012135921..ipa
CameraGenius-08101280149..ipa
FakeCall-141112154915..ipa
GoogleSearch-071012172607..ipa
GoogleTranslate-061012153127..ipa
Justin.tv-041112102027..ipa
mix.djPro-061012150724..ipa
MobileRSSPro~GoogleRSSNewsReader-071012123244..ipa
NetNewsWireforiPad-12121293750..ipa
NinjawordsDictionary-271012153519..ipa
PocketDJ-061012153206..ipa
RSS Reeder-291012132923..ipa
SoundHoundì-071012200259..ipa
Wikipanion-061012154615..ipa
WolframAlpha-071012195603..ipa
Portal-FullScreenBrowser-010113214933.ipa
ShoppingList-010113165542.ipa
SystemStatus-activitymonitor,networkinfo,batterycharge&memorymanager-01011316092 2.ipa
hope this helps.

Multicam editing with multi-track audio?

Does anyone know how to do multicam editing with multi-track audio? Apparently, the multicam editor can only see Audio Track #1 in the Source Sequence. I tried mixing my original audio tracks #1, #2, and #3 (submixes) to the master audio track in the Source Sequence and if I listen to the new Multicam Sequence (the nested Source Sequence) all 3 original audio tracks are there (combined), but when I go to do the multicam edit in the multicam monitor window, I"m back to just Audio Track #1 of the Source Sequence and audio tracks #2 and #3 are missing ??? Thanks for your help!

I have run the gambit of different techniques. The one that is most efficient is listed in Colin Brougham's response number 9
There's a far easier way to do this: after you sync your angles, hold down Alt/Opt and select or lasso just the video portions of the clips, and nest those. The audio stays put, but the video moves into the nest, and you can then enable Multicam on the nested sequence.
One of the best things about this is that it circumvents Premiere Pro's totally BS "Render Required Files" nonsense.
I must admit the ALT lasso tip was one of the best features I have seen. Like a revelation when I discovered it some months ago while watching a tutorial about something not related. As far as the "Rendering required files" That was kicking my but for a while doing multicam editing. If you do edit both audio and video in multicam you might find the "Rendering required files" issue. Basically the problem stems from having a lot of cuts to process at the same time both audio and video. 1080P is a huge amount of data when you multiply it by four cameras plus multiple audio cuts and effects ,(audio gain, Deessing etc.) So Pre-rendering the audio by clicking in the main sync timeline and then at the top Click Sequence/Render Audio.This takes care of the issue when you are cutting multiple tracks at once. It is a good practice to work from a main sync sequence and then copy that to a new sequence preserving the main sequence as unchanged. I found the solution is to "render audio" only in the master sync sequence this will then pass through to all subsequent copies that are made "downstream" allowing you to easily clean up anything. If you make a mistake you can always start from the main sync sequence and not lose too much time. Takes a little bit of time to render but once that is done you can cut all tracks video and audio like butter. I have been doing a lot of 1080p multicam editing over this past year and had quite learning curve. Most of the work I do is multicam editing by choice it is much faster for me to edit this way because I am used to working in live events where we need to look at all shots at the same time make a "best choice" and keep rolling. Have fun with it!

Updating a MULTI-ISSUE APP to a MULTI-ISSUE SUBSCRIPTION app

If I create a multi-issue app, where the customer just puchases each new folio/issue, can I update that specific app to a multi-issue with iTunes subcription at some point in the future?
Basically, our publication isn't ready for a subscription model yet but it will be early next year. We want our app to be able to offer a subscription once it is avilable without the customer having to download a new version of the app.
I assume the workflow would be:
- submit multi issue viewer app with app description/screenshots specified in iTunes Connect. That gets approved, goes live and runs as required.
- a month later, we want to introduce a subscription model.
- I build a multi-issue with iTunes subscription app, update my app description, version and add subs details in iTunes connect and submit that to Apple. That gets approved and the app is updated, now offering a subscription.
Answer musch appreciated.

Yes, you can convert a multi-issue app to a subscription app. A subscription app requires push notifications, so you'll make it easier on yourself to add push.
When you first submit your app, you may want to submit as many in app purchases as you can for pre-approval.
When you create your App ID, turn off iCloud.
When you're ready to make the app a subscription app, create your auto renewable subscription durations in iTunes Connect. You'll need to submit a new app version when you submit the in app purchases. In Viewer Builder, create a new viewer -- you can't edit the old viewer.

X-Fi Mixer App Probs with Multi Moni

Similar Messages

Maybe you are looking for