X-fi: Moving equalizers between mo

Is it possible to move custom equalizer settings from one mode to another in the console launcher or in some way? It's quite annoying I can't use the same for all the modes...

bleh, found the solution
"Just to let you know, that the "clicking" sound your hearing, is from the electric relay mounted on the card(that big black component placed at the corner).
This is normal behavier from using a relay, and I'm getting it from my Elite Pro too!"
as written here in this post:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=3562#M356 2Message Edited by cedman on 03-3-200604:32 PM

Similar Messages

LR5 stopped moving files between folders

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

It stopped sending mail and moving messages between folders, junk messages stopped being moved.

Recently, Thunderbird stopped sending mail and moving messages between folders, junk messages stopped being moved.

Further notes (different user, same problem):
* This is a problem that started in Thunderbird 32
* This involves both automatic (filter) moves and manual moves
* This includes use of keys and hotkeys (the delete key, for example)
* Restarting Thunderbird does seem to "reset" the problem... for a while. I notice the problem most when either I've been away from the computer/program for a while or when waking a laptop computer from a sleep or hibernation state.

Moving apps between screens

I'm having trouble moving apps between screens. I can move one app but then if I try and move another, I drag it off the side of the screen but the screen doesn't change. The only workaround I have is to move an app to the dock, change the screen with a swipe, then move the app out of the dock back onto the new screen. Is anyone else having this problem?

I thought this was broken on my iPad after upgrading to iOS 4.2. After messing around, I found that if I move an icon around on the screen and hold it at the edge of the screen for a few extra seconds, with the edge of the icon slightly off the screen. Then the screen will change.

Moving files between folders is very slow

Hi, I have an iMac 2011. Processor: 2.7GHz Intel Core i5/ Memory 4GB
OS X Yosemite, version 10.10.1
After I change my OS from Mavericks to Yosemite, moving files between folders is very slow.
For example, if I move one jpg file in Desktop to Pictures folder (or just any other folders like Trash), it takes about 3 seconds.
When I was still using Mavericks, it made that Ding sound and transferred files right away. However, now, although it makes the Ding sound right away, the file is still there for 3 seconds.
I tried to clean up my mac using many apps, but they never fixed this problem.
I've also tried what I saw on this one thread. OS X File Transfers Very Slow
Go->Connect to Server then type "cifs://server-address" but it says there is a problem and did nothing. (maybe different issue)
Please help!

There may be other issues, but you installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Modification dates change when moving/copying between hard-drive and flash

I use a flash drive to store most of my work-related documents on. That way, I have them when I'm at school (on a Windows XP computer) and at home on my Mac OS 10.3.9. I
try to occasionally back-up my flash drive by dragging it's contents to my Mac. Copying in this direction USUALLY retains the appropriate modification date.
However, if I move things from the Mac to the USB drive (I occasionally make changes to a file on the Mac when my flashdrive isn't handy), the modification date changes to the copy/move date. Is there a way around this? It alters the information about the file and sometimes makes a version look newer than another version of a document. When in reality, it’s older--it’s just been moved/copied and the date changed.
I often move things back and forth for backup purposes, but if it keeps changing the dates on it’s own, it’s impossible to tell which is REALLY the
most current copy/version.
Is there a fix so that copying and moving files between volumes does NOT change the modification date of the file?
Powerbook G4--12 in.--1.33 GHz Mac OS X (10.3.9)

Hi, teacher. When my Lexar JumpDrive Secure is formatted as a MS-DOS volume so a PC can read it, the last-mod dates of files that I copy to it are changed to the date and time of copying. When it's formatted as a Mac OS Extended volume, the original last-mod dates are copied to it unchanged. Looks like you can thank Bill Gates for the inconvenience: apparently it's a DOS file system "feature". Don't you wish you could use Windoze all the time?
On second thought, the files really are changed when you write them to a DOS volume, because the DOS file system has no place to store the metadata about your files that a Mac pays attention to and a Windoze box doesn't. So when you write Mac files to a DOS volume, that metadata — which is part of each Mac file — is simply discarded, causing the last-mod date to change.
Message was edited by: eww

Intel Macs & G5s: Problems when moving projects between them

An earlier post* suggesting complete compatibility between the latest FCP in a G5 and in an Intel Mac may be in error.
We are experiencing continuing crashes using our Intel Mac when we work on projects that were originally either imported or partially rendered in the G5.
It has gotten to the point where we feel we must keep projects completely isolated from each other: Either it is a "G5 project" or it is an "Intel Mac" project. Moving projects back and forth between the two leads to problems such as:
The Intel Mac does not recognize any renders done in the G5...
The Intel Mac crashes when rendering 'G5' projects...
The Intel mac crashes when compressor goes to work to export sequences to mpeg...
The G5 works fine with Intel Mac-originated material: It is only in the Intel Mac where we have these problems.
Both systems are up-to-the minute on their OS, security updates, and FCP versions. We are using variously 720p/30 from the JVC GY-100UA and 1080i/30 from the Sony Z1U.
Our questions are:
Is anyone else experiencing similar problems moving projects between a G5 and an Intel Mac?
Is anyone moving projects between the two platforms and experiencing NO problems at all? That information would be just as valuable, and very welcome.
Apple FCP development team: Is our experience unique or have you had other reports like this? Any idea what could be causing our problems -- and what we can do to fix them?
* http://discussions.apple.com/thread.jspa?messageID=3604812&#3604812
Intel MacPro Tower, 3gHz, 8mb Mac OS X (10.4.8) Also a G5 Tower, 2x2.5ghz, single core

Scott,
Welcome to the discussions!
I have had no problems moving my G5 projects over to my MP.
You can not move render files between machines.
When you changed systems, did you use Migration Assistant to transfer your files over to your new Mac Pro? You might need to install from the disks in order to achieve native Intel performance. See if you installed Final Cut 5.1 on your G5 then it installed the PPC code... if you put that drive into your Mac Pro or used Migration Assistant to move the app over it is still the PPC code... When you install from the installation disk, Installer determines what system you are installing on (PPC or Intel) and that's what it installs. This goes for all of your "Universal Binary" apps...
In the System Profiler app. under Software/Applications
Final Cut Pro "kind" should be Universal on your MP.
The FCP development team do not read these posts, only users do.

IOS 7, Moving messages between Exchange accounts

Hi,
Can't find any help on this issue:
I have two Exchange accounts set up on my iPhone (and iPad), and both work well interms of sending and receiving e-mails. As I frequently get messages addressed to one address that "belong" to the other, I want to move these after processing them to the right folder under the other account.
ios 7 seemingly caters to this by allowing me to "move up" from the current account and see the other accounts. BUT, the other Exchange account is grayed out, so moving messages between the accounts is impossible.
This is perfectly possible on the Mac in OS X, so I am not sure why this should be infeasible on the phone?
Any ways to get around this?

Hold on, maybe you can. Try this and see if it works...
Select the account and message you want to move.
Tap the folder icon under the message
You should see at the top left of the screen <Inbox. Tap that.
You should now see <Accounts. Tap again.
Select the accoun, then the folder you want to move the email to.
Looks like it does work for me. Learn something new every day! :-)

Moving Files Between Unix - OS Commands

Hello All,
We have a Z object which download the output to an Unix directory, the out put file is loo large and when trying to access the Unix file from ABAP code to local harddrive, its erroring out that the maximum time set has passed.
Is there a way to access the UNIX files using the OS level commands as defined in the article posted "ABAP/4 Code Sample: Moving Files Between Unix" in SDN Network. I tried out the FM described, which did not exist on 4.5, 4.7 Ver. So any FM that can help me in performing this task.
Regards,
- Sravan

Hi Sravan,
compress your data with follow. command
(look F1 to open too !)
OPEN DATASET file FOR OUTPUT IN TEXT MODE FILTER 'compress'.
regards Andreas

Moving pics between accounts

I just want to check that this information is correct: To move photographs from one account on my computer to another account which is synced with a color iPod, I should just export my pics from iPhoto as 'orginals', burn them to an DVD, then import them to the other account's iPhoto.
Correct? Is there is an easier way - moving folders of photos from one account to another if I have administrator rights?
How do I move a video clip from one computer to another computer - iTunes bought clip?
Any help would be very much appreciated.
Muz
iBook G4,iMac 17' & Intel 20' Mac OS X (10.4.8)

You can use the instructions in this article to share your iPhoto library.
To move the video clip to another computer, locate it on your hard disk, and then copy the file to an optical disk, an external hard or flash drive, or use a direct connection between the computers, such as Ethernet, AirPort, or FireWire, to copy it.
(18748)

Error when moving files between Sharepoint sites using 'content and structure' feature

Hi,
I am using Sharepoint Online 2013 on a mac computer.
I am trying to move files between sharepoint sites/libraries but because the "open with explorer" link does not work on mac computers, I need to do so using the 'content and structure' feature.
When I select a file to move and then select the destination site/doc library, i get the following error:
An error was encountered performing this operation.
Operation to Move '120207_Australia Post_Invoice.pdf' to '/Ops/internal/admin/General Admin' failed
No items were moved. Please remove 120207_Australia Post_Invoice.pdf from the selection and retry operation
Please help!
Thanks,
Kate

Hi Kate,
If you mean only one file "120207_Australia Post_Invoice.pdf" could not be moved, please compare this file to the other files moved successfully, check if there are some differences, like the content types, fields.
Also compare the source library and destination library, make sure they have the the same type of fields.
And you could have a try of moving this single file separately see if it could help, or as a workaround to download this file from source and upload to the destination library.
Since it is related to SharePoint Online 2013, we cannot see the ULS log for more information, I would suggest you post this issue in Office365 SharePoint online dedicated forum via the following link for a better assistance.
http://community.office365.com/en-us/forums/default.aspx
Thanks
Daniel Yang
TechNet Community Support

Problem Moving Images Between Folders In Bridge (Windows 7 Professional)

I have just bought a new computer with Windows 7 installed. I now also have Adobe CS5 Design Premium installed.
When I try to MOVE or DRAG and DROP an image from one folder to another using Adobe Bridge I get the following error message:
"The operation cannot be completed because you don't have sufficient permissions"
When I try the same thing in Windows Explorer it tells me that I need Administrator Permission. I click OK and it works in that programme.I am actually the Administrator
Can anybody tell me how I can configure Bridge to undertake this task please.
Many thanks in anticipation
Adrian

Dear friends
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.
Somebody said to me the other night that when you buy a car you buy it to enjoy the drive, not to have to tinker with the engine. Microsoft and companies that supply and install Windows 7 on new computers please take note!

OSB gives confusing volume information when moving tapes between libraries

Hi,
We have an SL500 tape library as our main backup device. We also added an SL24 to the OSB domain for testing prior to installation elsewhere. We have an RMAN-FULL-MF media family, which at some point in the past had unexpired media in both libraries.
As part of the process of decommissioning the SL24 prior to shipment, I unloaded the volumes from the SL24 and imported them into the SL500. However, I may not have run the necessary OSB commands, such that OSB has up-to-date information as to where the physical media is located.
Our DBA has tried to delete some old database backups, and this has failed because the backup pieces cannot be found. However, we have a volume in the SL500, RMAN-FULL-MF-000007 which appear to contains the backup pieces (see 'lspiece' output below), but OSB thinks the volume is still in the SL24.
When I do an inventory of the SL500 I get:
lsvol -L SL500
Inventory of library SL500:
in 1: volume OSB-CATALOG-MF-000085, barcode 000001, 408693760 kb remaining, expires 2008/10/02.07:01
in 2: volume CLIENTS-INCR-MF-000042, barcode 000000, 405070848 kb remaining, expires 2008/10/14.03:01
in 3: unlabeled, barcode 000002
in 4: volume RMAN-ARCH-MF-000006, barcode 000003, 387257344 kb remaining, content manages reuse
in 5: volume RMAN-ARCH-MF-000003, barcode 000004, 358014976 kb remaining, content manages reuse
in 6: volume RMAN-FULL-MF-000005, barcode 000005, 353155072 kb remaining, content manages reuse
in 7: volume OSB-CATALOG-MF-000087, barcode 000006, 408693760 kb remaining, expires 2008/10/04.07:01
in 8: volume RMAN-FULL-MF-000006, barcode 000007, 361881600 kb remaining, content manages reuse
in 9: volume CLIENTS-INCR-MF-000044, barcode 000010, 407601152 kb remaining, expires 2008/10/20.02:02
in 10: volume OSB-CATALOG-MF-000084, barcode 000011, 408794112 kb remaining, expired
in 11: volume CLIENTS-INCR-MF-000039, barcode 000012, 406033408 kb remaining, expires 2008/10/10.03:02
in 12: volume CLIENTS-INCR-MF-000036, barcode 000013, 405890048 kb remaining, expires 2008/10/03.03:02
in 13: volume OSB-CATALOG-MF-000086, barcode 000014, 408708096 kb remaining, expires 2008/10/03.07:02
in 14: volume CLIENTS-INCR-MF-000038, barcode 000009, 407687168 kb remaining, expires 2008/10/04.04:04
in 15: volume CLIENTS-INCR-MF-000043, barcode 000008, 407586816 kb remaining, expires 2008/10/17.03:03
in 16: volume CLIENTS-INCR-MF-000037, barcode 000015, 409627648 kb remaining, expires 2008/10/03.03:02
in 17: volume CLIENTS-FULL-MF-000028, barcode 000016, 337067008 kb remaining, expires 2008/10/05.04:18
in 18: volume CLIENTS-FULL-MF-000029, barcode 000017, 318909440 kb remaining, expires 2008/10/05.05:08
in 19: volume CLIENTS-INCR-MF-000041, barcode 000018, 408406016 kb remaining, expires 2008/10/11.05:09
in 20: unlabeled, barcode 000019
in 21: volume CLIENTS-FULL-MF-000031, barcode 000020, 312597504 kb remaining, expires 2008/10/12.05:04
in 22: volume CLIENTS-FULL-MF-000033, barcode 000021, 389140480 kb remaining, expires 2008/10/19.05:08
in 23: volume CLIENTS-FULL-MF-000034, barcode 000022, 392922112 kb remaining, expires 2008/10/19.05:08
in 24: volume CLIENTS-INCR-MF-000035, barcode 000023, 409815040 kb remaining, expires 2008/10/02.05:06
in 25: volume CLIENTS-FULL-MF-000032, barcode 000024, 356518912 kb remaining, expires 2008/10/19.02:02
in 26: volume CLIENTS-INCR-MF-000040, barcode 000025, 409699328 kb remaining, expires 2008/10/11.04:04
in 27: volume CLIENTS-FULL-MF-000030, barcode 000026, 375496704 kb remaining, expires 2008/10/12.04:18
in 28: volume CLIENTS-INCR-MF-000034, barcode 000027, 408218624 kb remaining, expired
in 29: unlabeled, barcode 000028
in 30: unlabeled, barcode 000029
in 31: volume RMAN-ARCH-MF-000004, barcode 000056, content manages reuse
in 32: unlabeled, barcode 000059
in 33: volume RMAN-ARCH-MF-000005, barcode 000055, content manages reuse
in 34: volume RMAN-FULL-MF-000007, barcode 000057, content manages reuse
in 35: unlabeled, barcode 000058
in 49: unlabeled, barcode CLNU00
in 50: unlabeled, barcode CLNU01
This shows the relevant volume. However, when I do an 'lsvol' by media family, I get:
lsvol -f RMAN-FULL-MF
VOID OOID Seq Volume ID Barcode Family Created Attributes
166 166 1 RMAN-FULL-MF-000005 000005 RMAN-FULL-MF 07/06.03:20 never closes; content manages reuse
167 167 1 RMAN-FULL-MF-000006 000007 RMAN-FULL-MF 07/06.03:23 never closes; content manages reuse
324 324 1 RMAN-FULL-MF-000007 000057 RMAN-FULL-MF 08/31.02:27 never closes; content manages reuse
288 288 1 RMAN-FULL-MF-000007 000057L3 RMAN-FULL-MF 08/31.02:27 never closes; content manages reuse
The volume RMAN-FULL-MF-000007 appears twice! The long version of this command gives:
lsvol -lf RMAN-FULL-MF
Volume OID: 166
Volume ID: RMAN-FULL-MF-000005
Barcode: 000005
Volume sequence: 1
Media family: RMAN-FULL-MF
Current location: SL500
Label host: ldvbspa01
Created: 2008/07/06.03:20
Closes: never
Expires: never; content manages reuse
Space remaining: 336.8 GB
Original OID: 166
Volume OID: 167
Volume ID: RMAN-FULL-MF-000006
Barcode: 000007
Volume sequence: 1
Media family: RMAN-FULL-MF
Current location: SL500
Label host: ldvbspa01
Created: 2008/07/06.03:23
Closes: never
Expires: never; content manages reuse
Space remaining: 345.1 GB
Original OID: 167
Volume OID: 324
Volume ID: RMAN-FULL-MF-000007
Barcode: 000057
Volume sequence: 1
Media family: RMAN-FULL-MF
Current location: SL500
Label host: ldvbsm01
Created: 2008/08/31.02:27
Closes: never
Expires: never; content manages reuse
Original OID: 324
Volume OID: 288
Volume ID: RMAN-FULL-MF-000007
Barcode: 000057L3
Volume sequence: 1
Media family: RMAN-FULL-MF
Label host: ldvbsm01
Created: 2008/08/31.02:27
Closes: never
Expires: never; content manages reuse
Space remaining: 390.1 GB
Original OID: 288
I ran the 'lspiece' command to get information about the specific backup pieces in question and I get:
lspiece -l -S 7ujpclm8_1_2
Error: can't read location SL24(DELETED) - UUID not found
Warning: can't obtain section and volume data for piece OID 2058 - UUID not found
Backup piece OID: 2058
Database: ukldmoms
Database ID: 3307807331
Content: full
Copy number: 0
Created: 2008/08/31.02:27
Host: ldvbsm01
Piece name: 7ujpclm8_1_2
BSOID: 3378
Volume ID: RMAN-FULL-MF-000007
File: 1
Sect: 1
lspiece -l -S 7vjpcn5b_1_2
Error: can't read location SL24(DELETED) - UUID not found
Warning: can't obtain section and volume data for piece OID 2059 - UUID not found
Backup piece OID: 2059
Database: ukldmoms
Database ID: 3307807331
Content: full
Copy number: 0
Created: 2008/08/31.02:31
Host: ldvbsm01
Piece name: 7vjpcn5b_1_2
BSOID: 3379
Volume ID: RMAN-FULL-MF-000007
File: 2
Sect: 1
This appears to indicate that OSB still thinks the volume is in the SL24, which has now been removed from the domain.
Does anyone know what I can do to get OSB to recognise that the volume is now in the SL500? Do I need to run the 'obtar' command with the -G option to re-catalogue the tape?
Ultimately I like to see some documentation on how to transfer tapes between libraries in the same domain, and also between domains, with specifc commands to run.
Thanks.

Hi,
Not quite as straightforward as you suggest, but we have made progress.
The volume has to have a rotation policy before the 'chvol' command will run, which seems logical. So I created a policy for movement of tapes between the SL24 and SL500, and created and ran the media movement job. However, I then tried to remove the rotation policy, but could not because it was associated with the volume just moved.
I then tried a 'chvol -R "" RMAN-FULL-MF-000007' which returned an error:
"Error: can't relocate volume RMAN-FULL-MF-000007, volume has no rotation policy"
Which was the effect I wanted really - the removal of the association of the volume with the policy. I was then able to remove the rotation policy.
Also, 'lsvol -f RMAN-FULL-MF' still shows this volume listed twice.
The upshot of all this is that OSB now appears to show the volume in the right location and our DBA was able to delete the obsolete backups via RMAN.

Moving apps between databases

I have a fairly complicated application that has thousands of queries all with table names with fully qualified db links built in. For instance:
select *
from [email protected]
There are lots of dynamic queries buried in PL/SQL too.
Now I want to be able to shift this application easily between our dev and prod environments and I thought I'd be able to create two application items: Fnnn_DBUSERNAME and Fnnn_DBLINK then export the application, do a global find/replace and change all the tables to &Fnnn_DBUSERNAME.tablename&Fnnn_DBLINK.
But the SQL then becomes dynamic SQL and needs to be in a PL/SQL block. So all the queries would need significant rework to insert escape characters and concatenation.
I guess when moving between dev and prod I could export the app then find all links of one type and replace them with another before importing to prod but it doesn't seem very elegant.
Is there a standard approach to making applications portable?

You might want to consider creating synonyms in the APEX application's parsing schema for all object references of the the type <owner>.tablename@dblink.
The values for 'owner' and 'dblink' can be chosen as appropriate for the environemnt. The application should then simply refer to the synonyms rather than the fully qualified names.
This will make moving your apps between environments easier.

Moving DataSources between source systems

Hi Gurus,
I'm facing problems when trying to move a datasource between two source systems. Here are some details about the situation:
- I created a DataSource based on a DB-Connect source system (Oracle DB)
- I moved this DS to test system where it has been attached to the Oracle-Test-DB.
- Now I'd like to load data in SAP test system from the Oracle-Prod-DB. So I created a new source system in the SAP test environment pointing to Oracle-Prod-DB. Then I updated the conversion of logical systems now changing the source system to the Oracle-Prod-DB. After collecting the datasource and transporting it to SAP test system I noticed that the datasource already existed remained untouched and an additional datasource has been created.
So, can you Gurus share any piece of advice how to change a datasource from one source system to another.
Any help is appreciated.
Thanks in advance.
Heiko

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

X-fi: Moving equalizers between mo

Similar Messages

Maybe you are looking for