X-fi music+ xp64 + no rear ou

Hi,
I have here a strange thing, when I used this card previously in
a dual xeon setup , Supermicro 4gb, with xp64 (sp), the card worked fine in 5.,
in both 'game' mode, and 'audio creation' mode.
Now I moved it thru two machines, Asus boards, both with a q6600 cpu.
In both machines, the 'game' mode will never let me hear audio from
the rear or center/sub output (clicking on the speaker pictos).
All the audio always comes from the from output.
Now, when I switch the console to 'audio creation' mode, and switch to
'multi channel wave' view, select the output buss of the WAVE channel to
the Rear and Front outputs, they work!!
This leads me to believe it is somehow related to a driver / dll issue ?
anyone have any ideas ? regardless of the speaker set, it is a Logitech,
but as I pointed out, it previously worked, under the same os, with the
same cards installed (areca raid pcix / asus 8800gtx)
any help is apreciated
Loopie

thx for the comments, but it is not an upmixing problem,
what you are pointing out is a way to upmix stereo into 5. etc
the actual 3+4 and 5+6 outs work in 'audio crea' mode, but not in
the 'game' mode or with any DX9 games / ap
ps.
PLEASE CREATIVE CAN YOU GIVE ME A HINT ?
thx
loopie

Similar Messages

HELP! Xtreme Music wont play rear speakers in 5.1 (only work in CMSS-

Just upgraded to quad core and dx0 and still my Xtreme Music will not play true 5. and EAX, my rear speakers only work when in CMSS-3D. I have always had this problem since the day i bought the card but i didnt occur to me that it wasnt playing EAX.
For example when i do the 5. speaker test with the CMSS3D off, the rear speakers play out of the front ones as if it were 2. .
I have ran dxdiag and and it says that it only detects the card as being software audio insted of hardware. Also while playing Medieval 2 Total War it says while selecting any EAX type "unable to find hardware support"
Please help,
thanksMessage Edited by dio300 on 2-25-200705:47 PM

bump

Rear speakers so

I use either CMSS 2 or Stereo Surround when listening to music on my computer. I have Gigaworks S750s (7.) and when I check the speakers the noise all sounds about the same volume. When I play music, however, the rear speakers are very soft... does anyone know why?

<IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-wink.gif" width=6> Gee I hope you have Speaker selection set to at least 5. not just Stereo.
Been answering a lot of these tonight I'll get ack to ya if I have more and not so tired.
Click the little Volume Icon by the clock twice to get the shortcut box of adjustments up.
There at the bottom is a Speaker Icon for that and a Speaker + which tests the set up.
Run it and see if what it says if changing the selection of speakers doesn't help.

Left speaker output failed, gigaworks s750

I have seen this problem on the forum before, here is one instance: http://forums.creative.com/creativel....id=70289#M493
I havent seen any solutions.
Setup:
Asus n78x-e deluxe motherboard with 5.1 capability
Usually i have it plugged: rear-> line in, front ->normal center/sub-> microphone
These speakers have worked fine for at least 6 months now, perfectly. Great sound output on ALL of the speakers. Today, was listening to some music, when my rear left speakers just stopped producing sound. So currently, my left rear, and left side speakers are not working. The speakers themselves actually work fine, as I have tested them with the center output, and the right outputs. None of the other speakers seem to work when plugged into left rear or left side. There is some sound, but it's significantly muted.
Help please!
Thanks,
Aric
PS: This also happened in my old speakers megaworks50, and i think it has something to do with a connection in the sub. I really don't want to have to deal with that. I'm hoping there's an easier solution thatn trying to RMA this. Perhaps i could open up the sub and just fix the connection? Whatsup with creative and having rear left speaker issues? I've read like 6 other posts now about the same type of problem.
Message Edited by aricjonho on 11-30-2005 07:02 PM

Temporary fix... turn the rear left audio channel down to nothing and you have a 6.1 system that wont crackle as much, but the sub will still distort anything without channel selecti've output (like single channel mp3).
Same here tho, quite a few people have posted about it, creative denies its a problem but i am seeing it more and more online reports and even my own customers (i tune high performance pc's) are having problems.
the left rear channel just "gives up" after a certain amount of use it seems. i have since cracked mine open and i cant see anything visually wrong (other than the anti-tamper warrenty seals are pointless to anyone with knowledge of moddelling paint and varnishes), just a odd smell that might be bad wiring or good cheese.
creative have so far told me (depending on what call centre i phone us/uk/eu) that its either my drivers, a failing Audigy2 ZS or abuse of the sub (ie max bass and vol(whats the point of leting people choose a setting that will blow up the product?)) basically anything that doesnt require them giving me an RMA.
I suggest everyone with the problem goes to a real shop, buys a set, swaps the speakers out of the box with the broken ones and takes them back again for a refund. then flog the good speakers on ebay and go buy an amp and a bunch of car speakers from halfords, knock them together with some duct tape and viola, a higher quality product.
(ps, i have a bad habbit(i love paranthesis))

How to make itunes play through all 5 of my surround sound speakers?

Hi,
I'm new so hello everyone
Received some very nice 5.1 surround sound Logitech x-530 speakers this Christmas and they are absolutely brilliant. I tried them with a DVD and the surround sound is really good. However, I can't seem to get all the speakers to play my music through itunes, i.e. only 2.1 stereo sound is played through the 2 front speakers and subwoofer. I understand that this is because MP3 is recorded in stereo sound and so only plays through 2 speakers, but I'm hoping that there is a simple way to do what is described in a similar thread here:
http://discussions.apple.com/thread.jspa?messageID=817792&#817792
The answer to my problem is described as "Rear speaker cloning", i.e. playing the same music through the rear speakers as the front. However this is from almost 5 years ago so I'm hoping that there is now a clearer solution to my problem- could I even solve my problem simply through itunes preferences? Or do i need a specific program/driver?
My "Soundmax" sound card came bundled with my ASUS P5N32-E SLI Plus mobo, if it's any help.
Many thanks in advance. I would really appreciate any help or advice.

Hi
Please find the links given below might help you to resolve your issue.
Resolving Microphone Problems
No Sound from the Speakers
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Neo4 Platinum (Non-SLi) Audio Plug

I only purchased my computer on friday (17th of June) from a local retailer, and after the initial struggles i have only the one issue left.
i read other topics about on-board audio issues relating to psu conflicts and missing voltage rails (way over my head) but to my understanding that was only to the Diamond and the Neo4 Plantinum SLi versions only. I have the non-SLi version so here is another topic.
Having updated bios and audio drivers and done everything else i can think of - the Front Channel plug of the on-board audio is completely dead. not that the speakers dont work, and as far as i can tell not that the drivers dont work, but well and truely dead, nothing comes out speakers/audio devices connected to the Front Channel plug, not even EMI.
All other channels work fine, and i was almost prepared to purchase a Audigy 2 sound card but also noticed a (long) topic regarding errors there too. Naturally id like to avoid additional purchases if i can, so i thought i might ask the question: Can i / should i send it to be repaired/replaced?
I noticed there is a 7 day dead-on-arrival warrenty, but not sure if this applies to me as i bought it from a local computer store (brand new in the box and invoiced tho)

Ah ok i didnt know who i could take it to to repair.
I installed the drivers off the cd the first time, and after they didnt appear to be working i then formatted the PC and installed those Realtek AC97 drivers. Unfortunately, if i plug the rear speakers into the front channel and the front speakers into the rear channel - the front speakers will play music from the rear channel fine, but the rear speakers on the front channel will be dead.
Thanks for ya time.

Crackling, Left Rear Channel noise, IRQs, 4 Gigs of Memory, fixes and problems with XFi Fatal

Hello fellow troubleshooters. Well I've been working on my XFI issues since there are so many of them trying to make the one piece in my newly built system work as intended. I will put my hardware info below this post for comparison purposes if it helps you at all or for feedback/ideas. Well first off I had the crackling noise popping so on even when my machine was idle. If you have not done this yet do it
!!! Start, Control Panel, Sounds Speech and Audio Device, Change Speaker Settings, Advanced (in device volume), ok now there is a bunch of sliders go to "options" check everything, ok now that you see all the sliders mute Everything besides: Play Control, Wave, CD Player for testing purpose. You will probably hear a difference as you do it. Especially Mic 2. Ok well that issue resolved my popping crackling noises when idle. Ok so I still have a shared IRQ issue since I have an Asus A8N32-SLI Deluxe board and the slots go as such PCI-E, PCI, PCI, PCI-E, PCI. Well since the GeForce 7800 GTX cards I have take up not just the PCI-E slot, but also the PCI slot is covered from the Huge Fan. Then the Same thing for the Second graphics card. So I have only one slot that works for my PCI Fatalty sound card. Well this forces me to share PCI IRQ between one of the Video Cards and the Sound Card. Its not a "conflict" it is simply sharing the IRQ, after the above issue fixed my popping issue this no longer was a concern. Now my big issue is that I sent my Sub Woofer in for RMA, I have the Gigaworks S750 7. THX speakers, they are great but when I really crank up the volume on them I would get the sound like a speaker was blown in the left rear channel, so I swapped another speaker in its place and I have the same problem. So the RMA folks said to send in the Sub Woofer which cost me over $30 to ship the thing only to have them tell me there is no problem. Well I had recently done RMAs on my sound card, both Video Cards, and my mother board too in hopes of fixing the next problem. So everything is new though I got a refurb on the mobo. So I'm just waiting on my Sub woofer now so I'm using my headphones and guess what I'm finding there is this noise in the left speaker, an issue I sent the headphones back for a long time ago when I was using them waiting to buy my speakers. I have the Creative Pro Gamer headphones. So now I read a post about someone else with the same issue left channel, and I have to wonder I am not alone and that usually means in Creative Labs land there probably is others with this issue that have spouses that wont let them stretch their audiophile legs with extreme volume, if this is you try it out kick up the bass, and see if you have this problem too, if so please post it here. I have no clue on this one and I am open to any ideas. Ok and the last issue!! This is the real problem I'm facing now. I play EQ2 I love my MMO titles with the occassional single player title for those short stints at the computer between work, parenting, and stuff my wife demands be started before she finishes speaking of it (those of you married know what I'm talking about). I have 2 operating systems, XP Home, and XP Pro 64. Home I use for Office, graphic design, and general applications. XP Pro 64 I use purely for gaming. All my games are installed through this OS which is on my 2 74 Gig Raptors in Raid 0, I have another Partition for XP Home, and a 3rd for all the game installs. So I recently found that after selecting Extreme Graphics option in EQ2 then moving the rest of the sliders to Max that my G5 keyboard which has a performance monitor in it showing the amount of Ram usage showed me hitting about 90% and would spilke at the same time as I found I had frame rate slowdown. So I decided to get 2 more gigs of Corsair Twin XMS 3500Pro 024x2 memory bumping me up to 4 gigs. Well I had to go into the bios I found and change a memory setting to discrete and enable the memory hole in order for XP Pro 64 and the motherboard to see the memory. At this time I was working on other things with my computer, and suddenly the popping noise came back so I'm pissed now.... But oddly its not happening in XP home, only in XP 64. So I'm thinking I may have to go to XP home for my gaming OS, then just before I install home I remember that XP home wont register 4 gigs of memory.... So I go turn off the memory hole and discrete settings and this sets the memory to 2 gigs.... Crackling sound in ALL EAX GAMES goes away.... So now clearly my issue with my sound card and EAX crackling noise is Memory related somehow. Now I have isolated it to 4 gigs of memory, but it makes me think of those folks with this issue perhaps something is amiss with their memory and how it works with timing, or onboard memory on the sound card which is a first time memory is put on a sound card?.... Any input is appreciated as to how to repair this issue, thanks for reading, below is my system set up.
rocessor >
?Model:???? x AMD Athlon(tm) 64 X2 Dual Core Processor
??????4400+
?Speed:???? 2.2GHz
?Model Number:???? 4400 (estimated)
?Performance Rating:??? PR7072 (estimated)
?Cores per Processor:?? 2 Unit(s)
?Threads per Core:??? Unit(s)
?Type:????? Dual-Core
?Internal Data Cache:?? 2x 64kB Synchronous, Write-Back, 2-way set,
??????64 byte line size
?L2 On-board Cache:?? 2x MB ECC Synchronous, Write-Back, 6-way
??????set, 64 byte line size
?<Mainboard >
?Bus(es):???? ISA PCI PCIe USB FireWire/394 i2c/SMBus
?MP Support:???? 2 Processor(s)
?MP APIC:???? No
?System BIOS:??? American Megatrends Inc. 8.2
?System:????? System manufacturer System Product Name
?Mainboard:???? ASUSTeK Computer INC. A8N32-SLI-Deluxe
?Total Memory:???? 3.9GB DDR-SDRAM
?<Chipset >
?Model:???? Advanced Micro Devices (AMD) Athlon 64 /
??????Opteron HyperTransport Technology
??????Configuration
?Front Side Bus Speed:?? 2x 005MHz (200MHz data rate)
?Total Memory:???? 4GB DDR-SDRAM
?Memory Bus Speed:??? 2x 200MHz (400MHz data rate)
?<Video System >
?Monitor/Panel:??? Default Monitor
?Monitor/Panel:??? HP D895 HP P20 2-inch Monitor
?Adapter:???? NVIDIA GeForce 7800 GTX
?Adapter:???? NVIDIA GeForce 7800 GTX
?hysical Storage Devices >
?Removable Dri've:??? Floppy disk dri've
?Hard Disk:???? WDC WD2500KS-00MJB0 (233GB)
?Hard Disk:???? WDC WD3200JD-00KLB0 (298GB)
?Hard Disk:???? NVIDIA? STRIPE? 38.49G
?Hard Disk:???? Generic USB CF Reader USB Device
?Hard Disk:???? Generic USB MS Reader USB Device
?Hard Disk:???? Generic USB SD Reader USB Device
?Hard Disk:???? Generic USB SM Reader USB Device
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVDRAM GSA-463B (CD 40X Rd, 40X Wr)
??????(DVD 5X Rd, 5X Wr)
?<Logical Storage Devices >
?.44MB 3.5" (A:??? N/A
?Applications - games - storage:233GB (5GB, 65% Free Space) (NTFS)
?Xp home (D:???? 24GB (5.6GB, 23% Free Space) (NTFS)
?CD-ROM/DVD (E:??? N/A
?Xp 64 (F:???? 24GB (5GB, 63% Free Space) (NTFS)
?Raptor games (G:?? 90GB (7GB, 8% Free Space) (NTFS)
?Ssdisk (H:???? 629MB (CDFS)
?Bf2xpack cd (I:??? 677MB (CDFS)
?Farstone (J:??? 00MB (CDFS)
?Removable Dri've (K:?? N/A
?Removable Dri've (L:?? N/A
?Removable Dri've (M:?? N/A
?Back up dri've (N:??? 298GB (3GB, 44% Free Space) (NTFS)
?Removable Dri've (O:?? N/A?EvolovE

Evolve,
I have the a8n-sli Premium which as you stated is basically the same board with a couple extra items. I have the latest beta bios ver -06. Since the early fall release the option which we will be talking about was available in the premium board which it I remember was Bios rev 9. I would download the latest bios rev.
07.04 (latest beta?or go with 06)?and flash in. Here are the steps to get the proper memory options to work and I have also included my system specs to compare.
) Hit Del to get into Bios
2) Go to the second tab on the top of the screen "Advanced"
3) Select the first option in the menu "CPU Configuration"
4) Select the first option in the "CPU Configuration" menu called "DRAM Configuration"
5) Select Manual configuration from the first Menu item.
6) The last two options in the same menu for DRAM are s/w remapping over 4G and h/w remapping over 4G. Select the "s/w remapping option over 4G" and enable it. Disable the "h/w remapping over 4G."?
7) Hit f0 and save the config.
You should now at post have 4GBws total but only 3GBs of usable memory and your X-fi should crush it in XP64 and XP32.
My Specs
A8n-sli premium (Bios -06)
amd X2 4400 (~2.5 GHZ)
4GB LL patriot memory (~228 HZ)
X-Fi Extreme Music
LSI 320-2e PCI express SCSI RAID controller (256MB buffer)
2x Seagate Cheata 5K.3?dri'ves
All water cooled
Good Luck
PapaH
By the way this is defiantly a XP64 driver problem because even with h/w remapping enabled in XP32 the card sounds fine. It only happens in XP64.

What's the problem with the music App on iPhone 3GS iOS 6.1.3

Sometimes the in the music app the volum doesn't show up, or sometimes I can't see
The the name of the singer it's like showing like an iPhone five or something and its annoying
Because its not a 4 inch it's. 3.5 inch can apple fix that?

Hello Kunmon,
The following article provides some useful troubleshooting that can help get your iPhone's camera working correctly.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
Next step is to pan that pink noise around with my SPL meter to calibrate the room.

How do I connect to radio stations for free automatic afternoon or evening of my favorite music? Do I forget about it on laptop, and plan to only enjoy radio music off my iMac desktop??

Radio streaming is my preferred music system on desktop Mac OSX, but new birthday MacBook Pro does not understand this. So, I send this message from laptop, while listening to desktop. Please tell me how to get radio station lists on this laptop. I do not download, or purchase music -- only listen to it while doing other things (housework, art, journaling, and currently -- caregiving to 70-lb Toller/Retriever who busted his left rear knee.....).
Please help -- my stress level does not need further elevation!
Corkrin901

Have you looked at iTunes>Radio?
Ciao.

Problem with Rear Speakers (Inspire P5800)

Hi,
I have bought the Inspire P5800 Sound System but I have a problem. When I do a soundtest with the driver software all speakers work but when I want to listen to music with Musicmatch Jukebox I don't get any sound on the rear speakers. I have on board AC97 sound on a Gigabyte K8NS motherboard.
Can anybody help me?
Thanks!
robertthronhill

robertthronhill,
That's normal as music are mostly in stereo and that's 2 channel only. Creative sound card have CMSS feature that upmix stereo to surround soundfield but since you are using onboard audio, you will have to check with your mainboard manufacturer if those audio card have similar feature also.
Jason

Cant hear from rear speak

I have installed my new Audigy 2 ZS hardware and software in concordance with my logitech z-5300e 5. surround sound speakers. For some reason, i cant hear from the rear speakers.. but not like nothing. I go into the EAX console and i play the song from there and i can hear music out of the back speakers for sure, but then i load counterstrike and do the surround sound test and i hear nothing from the speakers, i load musicmatch and i can hear from the rear speakers. THe reason i bought the surround sound was for FPS game improvement... can anyone help me out, why is it not playing when i want it to?

Under games, it doesn't matter. As long as your game supports DirectSound3D or OpenAL, it will support any number of speakers, according to your soundcards configuration.
To test functionality under DirectSound3D, I suggest using Rightmark 3DSound test
The positiong is very clear as long as you select Hardware Acceleration. Also some games need you to select output configuration, although this is against Microsoft's suggestions.
Message Edited by alexs3d2 on 09-2-2005 07:7 AM

Muffled sound from rear speakers (t7700)

I hooked up new T7700 speaker set up to my new Audigy 2 ZS Gamer and when i watch movies or play games i hear nothing from my rear speakers. if i put my ear right by them then i hear that there is sound coming from them but very quietly.
side front and center work fine any ideas?

That would be normal for a 5.1 system, rear is very discrete.
Use the speaker test and you should hear the level increase. or use cmss to play cd music to back 2 speakers.
[edit] sorry didnt see the bit with side speakers.
Select 5.1 instead of 7.1
if you still want to use 7.1 then check the settings in the decoder bit and look at where you are mapping the speakers to. like in a 7.1 speaker configuration map 5.1 content to etc\
For 5.1 movies use the rear mapping, or the side mapping,
if you want all the speakers on then select the side and rear option then whatever sound you get from the speakers will be a bonus.
Message Edited by dontasciime on 01-20-2005 10:06 AM

Inaudible sound from rear speak

hi,
i recently brought a soundblaster li've 24 bit sound card , and creative inspire 5. speakers. When i try to play dvds on powerdvd with prologic on, on power dvd software i can hardly hear any sound at all from my rear speakers. And also please explain what is the difference between software decoder prologic on power dvd and the hardware decoder ddts-00. will the surround quality be better on the ddts 00 decoder

NOOOO, wait. If you enable CMSS, you will get the same STEREO signal to all speakers. You will not get 5.. CMSS is for a 2 channel stereo signal to be sent to all speakers. Its mainly for music and not 5. DVDs.
EG: If you have a Divx movie which is 2 channel then you can turn on CMSS to get all speakers working, but this is not 5..
What you need to do is dissable CMSS.
Make sure everything is set to 5. also in windows control panel.
Now with WMP 0 you then need to go into the options for sound and also set it up to use 6 channels. This is 5..
You can also get WIN DVD as it will give you 5.
The best way to know what is going on is do this.
Play a movie with CMSS on, like you have it.
Now while playing the movie open up media CC. and then go to Surround mixer. Now go to advance and play with the sliders for all speakers. Lower the centre one to Zero. You will still hear vocals, This is not right. Lower the front and centre speakers and you will still hear all sound FX. This is not 5. my freind. Try it for your self and then you will see what I mean..

Problems Importing LPs and other recorded music to my iMac

Hi All
I am trying to import my vinyl LPs and other music to my iMac using my JVC MIDI System with a record dec attached. The only output connection is for a standard jackplug (headphone) socket, other than the cable connection point for stereo speakers (at the rear of the system). I was sold a standard cable with a jackplug at either end and told that by connecting this to the input side of my Mac it should work. This does not seem to regognise any form of imput from my MIDI system can anybody help please!
Thanks in advance.

Hi Martin
Thanks for your response I have only used this forum once before and wasn't tosure what details where relevant. I am also not sure if I can provide answers to all your questions but will do my best;-
It would help if you tell us the exact make & model of the equipment you are using.
Your Mac? -IMac 11,1
What JVC MIDI system? Unfortunately it is an old system now and I don't appear to have kept the manual. It is a JVC COMPACT COMPONENT MD SYSTEM MX-MD9R R-D-S EON.
What "record dec?" Actually, what do you mean by "record dec" in the first place? Do you mean yourturntable? It is an AIWA PX-E800 turntable which i connect and play through the aux side of the JVC system
Is your JVC MIDI system capable of providing the RIAA EQ for vinyl LP's? dont know
What software are you using on your Mac to do the recordings? ITunes 11.0.2
In general, I wouldn't use a MIDI device for recording analog audio. They weren't intended for that purpose.
Thanks for your help Paul

X-fi music+ xp64 + no rear ou

Similar Messages

Maybe you are looking for