X-fi not detec

After reading hundreds of posts on this matter,I still find myself wondering what it takes to resolve this problem. The computer just seems to "loose" the card after reboots. I have the newest drivers,bios,and hardware. I will list my setup below,if anyone with a similar setup has resolved the problem i would be most gratuitious for your help. I have tried the switching pci slots and clean installs. The card sounds great when it works,but there in?lies the problem huh??asus pb5 deluxe mobo (965 chipset?)intel 6400 cpupny 8800 gtx videokingston hyper x ddr2 800? (2 gigs)cooler master 600 watt psux fi ext. gamerwindows vista premium?(64bit)????????????

I can of curse not be 00% sure hybyrd have the exact same problem as me, even though it sound like it. Fore me it is like this:I start up the computer and have no sound. When i go to the control panel to manage the sound devices, the only sound device?I have available is "Modem no 0".When i go to the system manager to check on the hardware, everything seem fine. Test of the hardware says the hardware is fine. If?I reinstall the latest drivers, but don't restart the system when prompted, the sound works fine.When i restart the computer I'm back at the beginning with no sound devices. So it is not faulty hardware (in the sense that it cant play audio)?I have now tried a system rollback to about a week ago. That seem to work at the moment, but?I have not restarted yet to make sure the change is permanent (I have tried this already once, which made the sound work for a little while during startup, but then it stopped working). I am starting to suspect that the cause is timing in the startup procedure, or that some application/driver that starts later in the startup process blocks/disables the audio device in some way.

Similar Messages

When I try to open a gradebook program called powerschool, I get a message that Java is not deteced, but my computer indicates that it has Java. I can't download any version of Java because I get a message that Apple has its own version of java. My compu

When I try to open a gradebook program called powerschool, I get a message that Java is not deteced, but my computer indicates that it has Java. I can't download any version of Java because I get a message that Apple has its own version of java. My computer indicates that no new software updates are needed.

Start here: http://support.apple.com/downloads/#java

Windows Vista and iTunes is not detecing my 30 Gb 5th generation ipod

I've done everything in the trouble shooting section, but no luck.
http://discussions.apple.com/thread.jspa?threadID=1864312&tstart=0
Apple is not even showing up in my Device manager list.

Nvm, I'm sorry I hated you Apple, it was my stupid fault!
My USB Mass Storage Device was disabled.
http://screensnapr.com/u/voe1wc.png
Hurr durr...
Message was edited by: AngryAtApple666

MY CREATIVE ZEN M NOT DETECED BY WINDOWS OR ZEN ME

HELLO, i have a serious situation here. i had my zen for about 3 months and i love it. but about 2 weeks ago, i wanted to transfer new music and video to my player. i noticed at first that not all my music shows in my zen media or my windows media. i do have all the componets to my cpu. i have windows xp serivce pak 2 and i have windows media 0. well n-e way, i also have real player. i pulled real player and i noticed that every piece of music and video i have was there. so i decided to sync it to my device using real. at first it transferred, so of course i get ready for bed and i noticed it was taking a while. so i figured when i get up it will be done. well it wasn't, it only transferred four songs and it downloaded everything from my cpu to my device. i had folders in there that i never seen. so i figured let me delete everything and start over, but using windows media. when i did that, it tells me that windows media player does not detect a portabel device, connect your device, and then try again. so i clicked on the web help option that comes with that error to see if they can give me some info. it gives me a code c00d79 and that is the reason why it is not connecting. so i searched the internet to see if i can anything comes under this code, join discussions and also email creative. alot of info i have found in the codes, but not this paritcular one. then i called dell techincal support because that is where i purshaced my zen. they couldn't help me. so today i went to the knowledge support and i found info on the same problem that i am experiencing. so i did everything. checked the device manager. my comp reads that the zen is there, but windows and media doesn't. so i did the back up regristy and also for the usb, still nothing. so it says to contact tech support and of course, there is none, unless u pay a fee. i work long hours and the hours are impossible for me to contact. the only way is if they work weekends and they dont. i am lost at this point. it will be 3 weeks exactly tomorrow that my zen is not working. i can not go another day without my device. i am starting to think i need to return my device for a new one. this is my last option. PLEASE HELP ME!!

Anyone who can help?
Please!
At least give me some ideas please.

Setup program tells me my SB Live! 5.1 is not detec

Hi,
I bought a SB Li've! 5. a few months back, and for some reason the place I bought it from was selling the Asian edition. I don't li've in Asia nor any region close to it, but the card was cheap and I figured the hardware is exactly the same in Asia as it would be anywhere else. I installed it initially without a problem, and then a month or so ago I uninstalled all the software that came with it as I had a problem with the mixer - it was showing speaker setups that I don't possess as the only selectable options in the speaker configuration part of the mixer.
I have managed to lose my installation CD, and so I downloaded the latest drivers off the Creative website thinking they should work. However, even though I chose Asia as my region, when I ran the file I got the message "Setup could not detect any Sound Blaster audio card on your system" shortly after the package was unzipped and the installation program was initialised. I manually installed the Creative Diagnostics package, ran it, and the hardware detection failed. Strangely, if I manually installed the driver from that exact driver package, XP detected the card fine and installed it as "Creative EMU0K", and I had sound again. It's just the peripheral packages (mixer, CreativeHQ etc) that I am having problems with.
I have since tried downloading another Creative SB Li've! driver installation package, which gives me the same error. The two drivers I have tried were called Li'veDrvUni-Pack(ENG).exe and Li'veDrvPack.exe.
What do I have to do to properly identify my soundcard? Is there a program I can run that will tell me exactly what version of chipset my soundcard possesses? Or, failing that, is there something I can see on the card itself that might tell me what version it is? And from there, how do I go about getting the right driver package off the internet?
I have recently purchased an awesome speaker system (Logitech X620) and am itching to hear it in all its glory, but this little problem is preventing me from doing so. Any help or advice you can offer me in getting my SB Li've! 5. working will be greatly appreciated.
Thanks!

I give up on this card! I actually have it working and playing all of the speakers in my 5. setup but I have no idea how I did it. I had the card for awhile without knowing anything was wrong because I had a 2 speaker setup. About a week ago I picked up a set of 5. speakers. I started up Half-Life 2 expecting to get better spacial effects. After playing for awhile I was unimpressed and for a second thought maybe surround sound wasn't all it was cracked up to be when the thought came to me to check to make sure all the speakers were playing. They weren't. So I popped in the Li've! Installation CD hoping it would fix the problem. It didn't. In fact, AudioHQ started giving me an error that I didn't have a compatible soundcard after the reinstall. I notice of the 3 installation disk I have, one has a "for XP" tacked on the end. So I pop that one in and reinstall everything only to get the same results. I uninstall and reinstall repeatedly with different settings with no result. I go to the website for updated drivers only to get the "Could not detect any Sound Blaster Audio Card" message. I use WinZip to unzip the exe file and manually install everything like Jeremy suggested and at least I get sound again but still no center or surround speaker output. I fool with some settings and amazingly get the center to play. Still unsatisfied with the surround speakers not playing I decide to look into the KX drivers. I install them and seem to get all the speakers playing then after the restart I get no sound at all. So i decide to use System restore to go back to just before I installed the KX drivers in hope that I haven't lost center speaker sound again. Miraculously after the System Restor all the speakers are playing! I'm still afraid to open AudioHQ or any of the Sound Blaster software in fear that it might reset everything and I have no idea if another restart will kill the center and surround speakers again. Hopefully this info can somehow help someone figure out how to get this nightmare of a card to work the way it should.

X-Fi Xtreme Gamer not detec

Hi all,
I, like many it seems, am having the not detected problem with my X-Fi card that I bought yesterday. I removed the old audio drivers, restarted and disabled onboard sound, and turned off and installed the card. When I turn my PC back on, the light comes on the X-Fi in the optical out, but when it gets into windows, no new hardware is detected and the installer doesn't find the card. I also can't seem to find it in the device manager. Anyone got any ideas?
Cheers,
gamer

Problem fixed... Just reaseated the card in the PCI slot and it worked. Probably wasn't in properly. Thanks anyway.

How to download flash video when a flv extension is not detecable

Standard methods for saving videos are not working for a particular file I'm trying to save. If you know of a third party app that can download flash video (where the video owner has not enabled viewing of the flv file), please help. Thanks.

If you have set a blank Administrator password, then the install should go forward with the blank password.
If not, then I would assume it to be a problem with your operating system. Contact Apple.
[topic moved to Flash Player forum]

XFI-Extreme Music-Microphone is not detec

First of hey and sorry if this is an appropriate post but i looked at the stickies and they didn't help so im posting.
Ive had a XFI card for almost over 2 years now and obviously i have been using the sound for it but i haven't connected my microphone to it as I've have been using the realtek drivers on my motherboard but last week i lost on microphone input and had to resort to using a USB mic that i borrowed, thinking it was my headset i brought another and tried today and its still not recognizing my voice. So i plugged the mic in my XFI port and tried to see if it reconises voice but it doesn't, but when i go through the help and set up software and it asks to speak out the sentence it doesn't pick it up but if i turn the mic on and off it picks up sound for a brief second. I updated all drivers both for the card and motherboard and tried using both headsets which both work perfectly and still no luck so im asking outto you guys if you had the same problems and have the solution to my problem.
Thanks in advanced

I guess that should have been more obvious than it was :smileysurprised: yes, I had 'what you hear' selected. That would also explain why muting the playback of the mic was stopping people hearing me on vent/teamspeak.
just going to go check this now, thank you. Two pairs of eyes/brains better than one and all that.
[edit]
yes, that was precisely it - I feel ever so slightly embarrassed but thank you for the help.
Message Edited by DanielID on 06-4-2009 0:28 PM

MicroPhoto Not Detec

Hey folks,
My player didn't seem to come with any firmware, whenever I started it the player would just start in Recovery Mode. I tried Clean-Ups and Reboots and that didn't solve anything, so after reading a bit I Formatted it, then did the Driver Reload and it did those fine. But, when I connect it via USB to my computer it charges and my computer detects it but the driver file, when run, does not detect my player so I'm stuck at the moment.
I read in another place about changing USB permission in the registry and I did that, no luck. Rebooted my computer etc.
Is there some driver I'm missing for the player itself? I checked the MicroPhoto downloads on Creative's Support but there were no drivers and it didn't come with a CD.
Also, my Notmad Manager doesn't detect it either. But the player does charge and display the 'connected to pc' image and I can see the data storage dri've in Windows Explorer but nothing else. Any help is greatly appreciated, thanks!
System specs if it will help,
Windows XP Professional Service Pack 2
024MB Ram
Intel P4 3.6GHz Processor
Windows Media Player 9

I am having the same problem ?My ZMP was working just fine when I got it in June, I have hundreds of songs and pics on it already. Then one day it stopped being detected by the creative software. Mine also shows up in the device manager, and when i plug it in it charges and everything. I don't know what to do. I have been in contact with people from support for almost 2months now and they still haven't helped. I have un-installed and re-installed the software from the cd multiple time and still nothing is fixed. I have even downloaded and updated from the creative site, and i'm still having the same problem. Anyone have any ideas??Lauren

Zen x-fi2 not deteced but x-fi is?

Hi,
I have both players mentioned above and can get the x-fi to detect but not the x-fi2. I have a windows computer with 8.1 installed.
I love my zen players and would LOVE to have a fix to this as I have 2 audiobooks waiting to be heard!
Thanks!

LOkay so everything works, except that Centrale doesn't see it's Well that's a relief? (I was afraid that something went wrong during the firmware update..)
Have you tried updating Centrale to the latest version? Or maybe reinstall the whole program?

EAX console woes: did not detect required components/audigy2 not detec

After a recent reformat, I go to install the EAX console after the latest drivers (don't have my original CD by the way) aaaand get the "did not detect required components" message.
So I search on it and it doesn't have anything to do with my dri've paths and such. I've tried an Audigy2 and Audigy2 value ISO, but they tell me they don't detect an audigy2... dxdiag tells me differently, however. I'm not in the mood for downloading a bunch more 400 mb ISOs to test them all out either..
I'm at a loss here and really need the EAX console... autoupdate detects my card as "Sound Blaster Audigy 2, DR release .88.20"

nanite2000 wrote:
superidan wrote:
I have retail Audigy 2 card. tryed removing the card and installing on a differant slot. Nothing Works! it produces the same "no audigy 2 card found - setuip will now exit" Creative sould be ashamed thanks
Yes, Creative should be ashamed.
This is a known problem that has been around for months and they have failed to address, just like many other problems with their soundcards. For the solution to this particular problem, look here:
http://forums.creative.com/creativel....id=3964#M3964
If you would reread my original post in this thread, that solution did not work for this particular problem of mine. I have a SoundBlaster Li've! Card that this solution worked for, however it does not work of the Audigy 2 card?unzipping the files with WinRar and then running the Setup.exe files produces the same result?setup does not recognize the required components and will close.
I?m not saying that the person who you quoted should not try it though.

Audigy SE not detec

My computer is not detecting my new audigy se card - trying to install drivers gives the message :
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program.
Setup will exit."
I did a search, but nothing I tried seemed to work. Any ideas?

Try moving the card to a different pci slot. make sure it's seated all the way in.

Unable to exit Recovery Mode/Firmware Problem/Portable Device not detec

Well. A veritable catalogue of errors, to be fair.
In attempting to solve my truncated WMA file issue of yesterday, I decided to install the upgrade to MTP Firmware 2.00.2. It crashed during the transfer, but since my Micro's music library was wiped in the process (as promised), I concluded that the installation had, in fact, been successful.
However, WMP0 suddenly couldn't detect the Micro. No matter what I did. Ah, I thought, the Firmware installation didn't work after all. So, following the advice on this forum, I entered Recovery Mode and attempted to delete/reload the new Firmware via the recovery menu.
'Deleting Firmware', declared a little pop-up, chirpily. Then 'Update Firmware Now'. I tried re-running the Firmware update installer, but the Micro was still not detected. So I tried a reboot via the recovery menu, only to receive a 'Firmware Problem' message. I knew that. That's why I was trying to re-load the firmware. But how can I when the Micro isn't detected, and. . . . Vicious circle.
Please help. I have my Micro boxed and ready to send back to Amazon, but if there's a walk-through solution anyone can give me, I'd rather not return this little begger (I've become rather attached to it).
Regards, and thanks in advance.
JP

jonpaulfahy wrote:
Just spoken to Noel on the UK Support helpline, and he suggested restoring my PC back to yesterday's config in order to get it to recognise the Micro as a portable device. Only then will I be able to re-load the new firmware, and (hopefully) reboot the Micro successfully.Not entirely sure whether this will help, and seems to me to be a case of the tail wagging the dog.Anyway, I'll give it a try tonight and update this thread with the result.JP
I have the exact same problem and the agent on the line told me the exact same thing,it didn't work.

SBWM server not detec

Seems like my SBWM is connected to my network and assigned an IP. However, the SBWM does not seem to find the Media Server running on my WinXP computer. I think I have all the software and firmware updates. Any help?
Thanks
MS

I started having the same problem when I was in PA. I was connected then one night just stopped right in my hands while I was browsing. I checked the settings and was connected. I thought maybe something was wrong with internet where I was. Waited until I got home, says I'm connected but still getting Safari Server not responding. I've tried all the fixes that seemed to work for everyone else. No luck with my iPad.

Creative Zen Vision: M Software problems, player not detec

hi, i just got a creative zen vision: m a couple of days back and i've had problems with it being detected by my computer. i've installed the software but when i connect the player to my pc, it shows up for about a second then it's not detected anymore. i brought it back to the store for them to check and it works on their lap-top. any ideas?Message Edited by wongkenji on 08-06-2006 08:26 PM

wongkenji wrote:
hmm.. something just struck my mind, do you think my printers could be affecting it's i'll go back and try later, hopefully it'll work. otherwise i have no idea lol.. thanks for the help!
Hmm, your printer?
I sort of doubt that...hmmm.
Did you contact CS?

X-fi not detec

Similar Messages

Maybe you are looking for