X-Fi Notebook and Surround Sound / Opti

Hey, I was wondering if the X-Fi notebook would accept 5. sound input. I'll explain what i'm trying to do:?I want to conenct my HD TV box to the sound card so that I can use my 5. creative speakers to watch TV and also play DVD. Would this be possible with this card + the surround sound expansion bay?Thanks?(Also, is there an external alternati've to this; with the same quality)

Any thoughts?

Similar Messages

  • How do I connect Apple TV and surround sound to my projector?

    My current set up is that I have a projector connected to my Blu-Ray player. My surround sound speakers connect to my Blu-Ray player. They all came in the box together and the speaker wires all go into the Blu-Ray. Everything works perfectly.
    However now I have bought an Apple TV and although I can play it through the projector, the sound is only through the projector and not the surround sound. I tried plugging the Apple TV in the HDMI in the projector and then connecting the Apple TV to the Blu-Ray via optical cable, but that didn't work.
    In the back of the projector there is 1 HDMI port and an audio port but no optical port
    In the back of the Blu-Ray, you have the speakers, the HDMI, the audio in and the optical port.
    How can I connect everything so that I can use my Apple TV with surround sound?

    The manual doesn't say anything an optical port on the BD ?

  • Optical audio and surround sound speakers for my Mac Pro

    In the back of my Mac Pro there's an in and out for Optical Audio. What is this and are there any surround sound speaker systems out there that will plug into it? Most surround sound speakers seem to require a PC-style triple-input, with three jacks (Green to front, Orange to centre and Black to rear channels). Very few surround sound systems have the additional option for a single headphone socket-style jack, and I'm not sure if they will work terribly well with this single connection.
    Can anyone recommend some speaker choices, particularly in the UK, that will give me good surround sound from the optical audio or single headphone jacks? Many thanks.

    You might want to look at a device called the Griffin FireWave: [http://www.griffintechnology.com/products/firewave]
    It connects to your MacPro via firewire, and has the green/orange/black jacks out to a standard 5.1 speaker system.
    It comes with a software application that lets you customize the sound, and also synthesize surround from mono, stereo, etc., sources.
    It would definitely open up your choices for speaker systems. I'm using one with a Klipsch 5.1 Promedia set of speakers. Works and sounds great.

  • Using sky go from Mac air to TV and surround sound speakers

    I have skygo, and want to watch it on my tv through HDMI cable, can I use logitech surround sound pc speakers too somehow?

    As your TV has HDMI inputs which will support sound as well as video, use a MiniDisplay port to HDMI cable (Mini DisplayPort to HDMI Cable by Cablesson works great)  or a MiniDisplay port to HDMI adaptor and HDMI to HDMI if not. Just make sure the adaptor supports audio as well as video. Just select HDMI in the Preferences Sound
    And yes, you could use your surround sound speakers via the 3.5 mm headphone jack, just make sure you select this option in Preferences Sound if you're not using the HDMI for sound

  • ITunes and surround sound internet streams

    Hi all,
    I'm looking to broadcast internet streams in surround sound and I want to select an audio codec which iTunes will play.
    Does anyone know which surround audio codecs are supported for internet streaming?
    Best regards,
    Daren.

    Thanks for your reply Dave.
    I had suspected that this was the case. I've been exprimenting with iTunes and haven't even been able to receive a stereo AAC stream. AAC and AAC+ only seem to be supported for files and not internet streams.
    If anyone disagrees, please feel free to correct me.
    Does anyone know if there are plans to support AAC and AAC+ in internet streams? ..and in particular for surround sound broadcasts?
    Best regards,
    Daren.

  • Blu ray and surround sound

    I just purchased a Sony Bravia kdl-52v4100 and a ps3 to watch blu ray. Now I want to buy a surround sound but watch blu ray at the same time with out buying a blu ray dvd player. Is there any way I can connect my PS3 with the surround sound to play together.

    Assuming you don't already have a surround system, and plan to use the PS3 for DVD and Blu-Ray playback:
    1)  Buy surround system with an optical audio input.  Most have this.  Since you have a PS3 you don't need one of the ones that has a built-in DVD player.  I'm partial to the Yamaha HTIB (Home Theater in a Box) systems.
    2)  Buy optical audio (TOSLINK) cable
    3)  Connect TOSLINK cable from PS3 to surround receiver
    4)  Leave existing video connection between PS3 and TV in place
    No need for a separate DVD player, the PS3 handles this.
    You will have to change some options of the PS3 to enable the optical audio output.  I can't help you here as I don't own a PS3.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Mac Pro and Surround Sound

    I cannot get 5.1 channel sound out of my Mac Pro (or my PM G5 for that matter).
    So what are my options for bringing out the surround content of Windows games to my Logitech Z-5500 5.1 system?
    I investigated the M-Audio Revolution 5.1. It's not compatible with the PCI-Express slots or with MacOSX 10.4.8.
    Is the Mac Pro too new for any such products to be available for it yet?

    Feeding my Logitech Z-5500 5.1 system from the optical out, only gives me DPL2, (I think) from DVD movies. For games on the Mac, I needed to take a feed to the Logitechs from the headphone out as the optical feed didn't yield any audio from games. What does the optical out give us then? Nothing more than sound for DVDs and some MacOSX alert sounds.
    Now I'm guesssing this but my intuition tells me that the optical path is a direct feed from the DVD player. Well, perhaps not really direct but certainly a different path to that of the integrated audio hardware.
    Now we have one most serious problem here. Nearly all games ported to the Mac are encoded 2-channel only. Aspyr admitted this to me. I do not watch DVD movies on my Mac so the Logitechs are serving no purpose apart from providing stereo audio.
    Aspyr says that since Apple only provides for 2-channel audio in hardware and software, game publishers never bother with surround information in their games. Aspyr says, if it did it could cause instability and crashes because the Mac is a 2-channel computer. Games with surround sound will be more common if Apple builds the feature into its computers.
    Unless Apple changes it's policy we are stuck with 2-channel. And similarly, Windows on Intel Macs is hobbled because the same hardware is used by Windows.
    Can a Firewire or USB decoder extract surround sound from Windows games? It certainly can on a PC. But what about an Intel Mac? I'm about to learn the answer when the Audigy2 NX arrives.

  • AirPlay and surround sound

    Hi, set up my apple tv . I have managed to get everything working ok but when I use the AirPlay option I cannot get my surround sound to work, it only comes thought the speakers on my tv. My current scary lead goes from my sky tv box to the DVD player that has the surround sound. However, when I set my scary from tv to DVD p,Ayer there is still bNo surround sound- do I need ton change a setting?
    Thanks

    I have no idea what your current setup is, despite your brief description. Go back a few steps to 'troubleshooting 101'. If your using the HDMI only, your ATV will output audio to whatever device the HDMI is connected to (uh, your TV?)
    If you want audio sent to any other device, you must use the digital optical connector. It is always active, so no changes in your ATV are necessary - just hook the optical cable to your surround receiver, configure your receiver to work with the optical input you have the ATV connected to, and it will work.

  • Tv and surround sound

    im trying to figure out which surround sound i need -- i want to use it for dvd and my cable -- so i can use surround soound for both ..

    The Yamaha HTIB systems are cheaper than $500 and quite excellent - I own two (one in the "office", one in the living room).
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Airport Express and Surround Sound Issue

    I recently have lost the ability to play music via Airport Express through my surround sound. It was working one day, I synced my IPhone and the option to play music through my surround sound is gone. Same with the "Remote" application for IPhone.
    Note: I am able to chose "Computer" and / or "Apple Tv" but not my surround sound. Any ideas how to correct this and why this was changed?

    Hello irk26. Welcome to the Apple Discussions!
    Although the Linksys WRT54GL, which is Linux-based and running DD-WRT firmware, is WDS-capable, it can be tricky at times for it to be also WDS-compatible with the AirPort base stations ... as you are probably already aware.
    Maybe one of the following articles may be of help:
    o How to extend your Linksys WRT54G with AE
    o Linksys WRT54G and WDS
    o Linksys WRT54G, Airport Express, and WDS
    o AirTunes, AirPort Express, and the WRT54G
    o Using Airport Express as a range extender/repeater for Linksys Cable/DSL router WRT54G
    o Extend a Linksys WRT54G network via AirPort Express

  • X-Fi Xtreme Audio Notebook -no surround sound

    All of sudden my surround sound is gone! Maybe it's due to some recent updates from microsoft, but system restore won't help.
    Anyway I got Inspiron E705, genuine vista 32, pcie sound card with 5./7. adapter. When I go to control panel - sound - configure, my configuration is 5. and it checks out just fine after hitting the test button. (sound appears in each speaker) However, when I want to play mp3s or movies on vista, the sound goes only through two (left and right) front speakers. Any ideas on how to fix it's
    PS. sound driver - up to date (from their website 7/4/2007)

    That is perfectly normal functioning for music playback unless you select CMSS Surround mode. Set the slider for 50% (middle) and you will get sound out all speakers. For monophonic sounds or music, you will get almost no sound at all out the front left and right, most sound out the center, and a bit of sound out the rear surrounds for spatial effect. This is at least how my Extreme Gamer card works.
    Phil

  • ATV and Surround Sound Speakers

    Hi gang,
    I'm looking to hook up a surround sound system and I'd like to have it so my iPod/iMac/iPad can wifi play over the sound system. I've got a Samsung Plasma TV with the following things hooked up:
    - Current gen Apple TV
    - PS3
    - Wii
    - Comcast DVR
    - Sony DVD player
    I'm thinking I just need something that runs from the TV to the surround sound speakers, but not sure about how to play music by wifi through the speakers. I'm no tech wiz, so I'm looking for an out of the box solution if at all possible. Any thoughts / inputs?

    Unless the TV has the option to output surround sound to a receiver (most don't) you would put the receiver in front of the TV in the chain and have all your other devices feed into the receiver, using the receiver to switch inputs to the TV rather than the TV itself.
    Your current Apple TV would take care of all the streaming from your iPod, iPhone and iMac.
    When considering a receiver take account of all the inputs you require as a result of all the devices you wish to play through it.

  • X-fi and surround sound headphones

    I'm interested in buying the X-Fi XtremeMusic, but I've been told that it's not good with surround sound headphones. I'm using Genius 5.1 headphones. They do have a switch that enables me to only use 2.1 if I want.
    Will the X-Fi work with these?

    I don't see why not. They would probably need bass redirection enabled with the +15dB subwoofer boost as one way to get correct channel volumes. This very long thread:
    http://forums.creative.com/creativel...essage.id=8533
    might give you some useful insights.
    Did whoever told you they weren't good tell you anything about why or in what way?
    -Dave
    [email protected]

  • Netflix and Surround Sound

    I was wondering when the Netflix App will be updated to allow the 5.1 surround sound facility. Feels like Im paying for something that I cant get at the minute. There would appear to be very little point having Optical connector when very little is actually available with surround sound.
    Many thanks, Simon

    it has optical out http://www.apple.com/appletv/specs/

  • X-Fi Fatal1tyFPS Yamaha RXV-659 and surround sound conund

    I've already determined that an optical out from the front panel does nothing but give me a 2. digital sound.
    I'm running under windows Vista x64
    the receiver is 7. capable although I've only hooked up 5. speakers till I finish figuring out how to set this thing up right
    I have a high fidelity monster digital coaxial cable with two rca ends coming from the receiver to the soundcard and am using a gold female RCA to Miniplug adapter in order to connect the receiver to the back of the card through the digital coaxial out
    Here is what I want
    DTS Sound
    sound coming from Front Left, right center and rear left and right on DVD movies played off my PC and on games capable of 5. digital sound.
    Why is my brain melting? Why can't I figure this out? I have already enabled the digital I/O thing under my device control. Don't tell me that the card isn't capable of digital 5. sound when using the miniplug to rca converter in order to attach a real digital coaxial cable because I'm going to have to murder something if thats the case.
    You have the power to ease my pain. You know the issue... you are capable of sparing the li'ves of countless innocent creatures that would be painfully released from the shackles of this world by allowing me to channel that rage into true digital surround euphoria... please... please help me...
    IF what I want is truly not a possibility at this point ... PLEASE instruct me as to how I can get the highest quality sound out of the card and into my now almost totally useless stereo receiver and I'll give you a cookie.Message Edited by sangus on 05-25-200702:03 PM

    When installing the Dolby and DTS connect packages, you need to right click each and choose to install them in VISTA compatibility mode. Then they install just fine.
    As far as your driver issue.........
    do a search for DRIVER SWEEPER from guru3d and that will uninstall your driver and hopefully put you back to a good reinstall. Also inside your driver folder you can look for utility called CTZapp that will uninstall all traces of that driver so that you can reinstall it properly.

Maybe you are looking for

  • IPad calendar app day view does not update to "Today"

    Everyday when I open my calendar app in day view, it always show the last date when I view the calendar. It does not automatically switch to Today's date. In other words, if I open the calendar yesterday dec 24, when I open this morning dec 25 the da

  • Error in generating a new XSL Transformer from large xslt File

    Good day to all, Currently I am facing a problem that whenever i try generating a Transformer object from TransformerFactory, I will have a TransformerConfigurationException threw. I have did some research from the net and understand that it is due t

  • Switch statement problem

    I am doing a question in which I have to make a simple ATM program that can withraw and deposit money as many times as the user wants. To exit the program the user has to hit "x". I have to use a switch statement. Im getting incompatible type errors

  • Freeze at logo screen: disk0s2: media is not present

    Hi everybody! I know this question has already been asked, but I read all the subjects I could find about my problem and I didn't find a solution. (Sorry for my english, also, I speak French ) So here is my problem: since yesterday, my MBP won't star

  • How to hide rows of Jtable

    i have a table with 200 rows on a filter action i would like to hide some rows and back when i say refresh it should be back with the same old table im using my own tablemodel any help thanks