X-Fi Notebook has a problem with headset/line-in
0X-Fi Notebook has a problem with headset/line-in` First the basics:
-HP Pavillion dv6000
-Intel Core 2 Duo @ .83 GHz
-Windows Vista Home and Student (SP) 32 bit
-3 GB RAM
Ok, now the problem:
-Ever since I got my Sound Blaster X-Fi card for this past christmas, I've had a problem with using the headset/lin-in port on it. Its only now that it's gotten to be a big enough irritation for me to need to fix it. I went to play some BF2 and hook up my earphone/microphone combo. The problem is, that the default recording device "Line-in" doesn't detect any sound when I have it plugged in. Further more, when I change it to "SB X-Fi micropone" it does detect my voice, but its on some kind of feedback loop, because it then transmits whatever the mic picks up onto my speakers/headphones/whatever I have plugged into it as an output. Its almost like they have the "line-in" and "microphone" functions either switched or blended into one. I did a complete reinstall of the drivers and software, but no luck. Any suggestions would be much appreciated.
Thanks guys
Hi,
What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
Message Edited by flipflop on 03-29-2009 09:03 [email protected]
Similar Messages
-
I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......
There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck -
Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?
rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc. -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!Have you got Siri turned on in settings/general/restrictions?
-
I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?
What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band? Are you both connecting vie 802.11 a/b/g or n?
The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on. -
error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing
Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder. -
G4 mini has a problem with its volume structure
My G4 mini has a problem with its volume structure according to Tech Tools Deluxe. One that the application can't seem to repair. Ran it 3 times and it always hangs before it completes the fix. Never hangs in exactly the same place in the repair routine, but always hangs.
Ran these tests because for the longest time the mini would accelerate (panic) and shut down. Installation on a new system hangs before it completes the install of all the upgrades. Any help would be appreciated.I realize it was not clear from the original post whether or not DiskUtility had been tried yet to fix the hard drive.
To use DiskUtility to repair the drive, you have to boot from the original install disc that shipped with your Mini.
1) Insert the Install disc and the shutdown the Mini.
2) Restart the Mini and hold down the C key as soon as the startup chime or beep is heard. Hold it down until you see the "gear" spinning on the screen.
3) Select your language, but don't proceed any farther with installation. Use the Utilities menu at the top of the screen to run DiskUtility.
4) In DiskUtility, click once on the hard drive in the left panel, then click on the Repair Disk button in the right panel. -
SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!
JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
KarenOK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated. -
I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Whatsnew page for 3.6.17 has formatting problems with Firefox and I.E.
I just updated from 3.6.16 to 3.6.17n and the whatsnew page, displayed after Firefox restarted, has formatting problems in the lower right hand corner.
I checked it with I.E. 8 and it also shows the formatting problem.
Why wasn't this caught before the page was put into "production"?
The URL is http://www.mozilla.com/en-US/firefox/3.6.17/whatsnew/
There is a line with the text "Release Notes » Firefox Features » Firefox Help »" that is being displayed on top of other material.
I wonder what a new Firefox user or an inexperienced user would think of this? They might think that they did something wrong or, worse, they might consider Firefox had problems and they won't use it.
This reflects badly on Firefox.
One more thing, could someone make this textarea taller and wider. It is so small as to cause problems typing and proofing the material.
The URL is https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=whatsnew+page+for+3.6.17+has+formatting+problems+with+Firefox+and+I.E.&showform=1
How about upping the cols and rows values? They are currently rows="10" cols="40"As you have a Power Mac you also have a alternative option to consider which is a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html
-
but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.
I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259
-
Who else has a problem with parental controls enabled not being able to run Firefox on the Mac?
Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)
Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas?
Maybe you are looking for
-
HP Photosmart C4400 series-Won't scan to Mac, but will Scan to Print
I just bought the Snow leopard and this is my first time scanning to my computer...it keeps saying the scanner is not initialized or it will say "sorry, scanner could not be initialized. an error has occurred communication with the scanner." I downlo
-
Hello All, I am getting the below error in the sender communication channel for FILE - PI -SOAP scenario. i am using integrated configuration in configuration. "Transmitting the message using connection File_http://sap.com/xi/XI/System failed, due to
-
Transmit audio to multiple iPhones over bluetooth
Can i transmit audio from my iphone to opther iphones? Is there an App that does this? Or does iPhone ONLY transmit and not capable of receiving bluetooth? The goal is to have multiple iphones listening to my bluetooth audio output. How can this be d
-
Default accounts on item group set up
Hi, This is a new company. I set up posting periods. I want to upload the item groups using DTW. The DTW upload fails because of error: One of the inventory accounts is missing , 'Inventory Account' [Message 173-6] I tried to manually enter an item
-
Problem with 3PR Eval Run in Payroll Off-Cycle process model
Utilizing the off cycle process model, we are trying to change from using the 2 steps for Garnishments which include the program RPCALCU0 using schema U500 and then running the 3rd party Evaluation using program RPURMU00. We are trying to replace th