X-fi picks up all computer audio please h

This is an issue regarding the X-fi extreme music.
Before anybody states it, yes I have "what you hear" unticked, this is my 3rd motherboard with this card and have had the same problem with everyone of them. Also I have the most recent drivers.
My problem is when using my mic to talk to friends, they can hear everything thats going on from my system ie gunfire from games, music, ect. I've done several test to weed out the possibilities that its my speakers, mic, or head phones by unplugging all of these and doing sound recordings with music playing, so i have no external form of audio protruding out, yet when i record the music playing it still picks up all the audio. Im stumped if anybody has a solution to the problem please let me know, its very annoying.

Hi i have this problem with the xfi extreme gamer? I bought Magix Samplitude Music studio 4 and when I installed it and tried to record some instuments via the line in.. It records the other tracks as well I have a mixing desk coming in via line in through which I can record vocals and gutars etc..
I have seen people talk about muting the wave out mix as I knew it on my old computer but I can't find an option for doing this anywhere. Some say, there should be a what you hear option but I don't appear to have that either..
On the old windows mixer, you had a dialogue box where you could block the wave out mix for recording but still have it play back the sounds that were computer based therefore you could listen to them while you recorded on the line in. My onboard audio is disabled in the bios as I thought I could do everything via the exfi. Anyone got any idea what is wrong here?

Similar Messages

  • Unresponsive Firefox script errors disables all computer audio

    I am currently running Firefox version 31, and recently have had it crashing several times a day due to "unresponsive scripts." Whether I tell the script to stop or continue trying, afterwards NO audio on my computer whatsoever will play. Nothing on Firefox, Chrome, windows media, MP3s, etc.
    I have already tried making the browser ask for permission to use Flash and other add-ons, disabling my add-ons, not using hardware acceleration, resetting Firefox, and all the other options that FF help suggests. None have fixed this issue. Once the sound has stopped, it won't work in Chrome or anything else.
    The scripts commonly occur on Squarespace, which is where my website is hosted. They sometimes occur on other sites, often where (I suspect) Flash is running. I've also tried redownloading Flash as well.
    Can someone please help?

    Did you check the Windows Task Manager to see if there are still plugin-container processes present in case that is the cause of this issue?
    You can check for problems with current Shockwave Flash plugin versions and try this:
    *check for updates for your graphics drive drivers<br>https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    See also:
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Garageband turns all computer audio off...?

    I have a USB microphone going into my Powerbook G4 running Tiger. Everything has worked perfectly until recently. During recording, Garageband will randomly turn off ALL audio on my computer during recording, so that I cannot hear the little pops as the volume gets changed, no audio from iTunes or the trash can or anything whatsoever, even though the menu bar still shows volume turned up. When I try to play something, i hear two quick pops, which I'm assuming is the audio turning on then back off again. As soon as I quit Garageband the audio comes right back, I can start up Garageband and things will work fine for an indefinite period of time before it turns it right back off.
    Any ideas on how to make it stop? I feel like this is some silly small detail I'm overlooking....

    I have a USB microphone going into my Powerbook G4 running Tiger. Everything has worked perfectly until recently. During recording, Garageband will randomly turn off ALL audio on my computer during recording, so that I cannot hear the little pops as the volume gets changed, no audio from iTunes or the trash can or anything whatsoever, even though the menu bar still shows volume turned up. When I try to play something, i hear two quick pops, which I'm assuming is the audio turning on then back off again. As soon as I quit Garageband the audio comes right back, I can start up Garageband and things will work fine for an indefinite period of time before it turns it right back off.
    Any ideas on how to make it stop? I feel like this is some silly small detail I'm overlooking....

  • How to deauthorize apple iTunes id all computer

    how to deauthorize apple iTunes id all computer?Please ans me.

    Hi Babu 007,
    If you need to deauthorize all computers on your iTunes account, you may find the following article useful:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    To deauthorize all computers associated with your Apple ID
    If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
    Cheers,
    - Brenden

  • How to make my computer send all the audio through optical audio cable instead of headphone jack?

    Howdy,
    To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
    I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
    1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
    2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
    Thanks in advance!
    My desktop is: 
    ENVY h8xt,
    • Windows 8 64
    • 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
    • 12GB DDR3-1333MHz SDRAM [3 DIMMs]
    • 1TB 7200 rpm SATA hard drive
    • No secondary hard drive
    • 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W Power supply
    • SuperMulti DVD Burner
    • Wireless-N LAN card (1x1)
    • 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No Additional Office Software
    • No additional Security Software
    • No TV Tuner
    • Beats Audio (tm) -- integrated studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements & Photoshop Elements 10
    And the laptop:
    HP ENVY 15t Quad    
    • Windows 8.1 64
    • 4th generation Intel(R) Core(TM) i7-4700MQ Processor
    • NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
    • 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
    • 8GB DDR3 System Memory (1 Dimm)
    • 1TB 5400 rpm Hard Drive
    • 24GB flash Hard Drive Acceleration Cache
    • No Additional Office Software
    • Security Software Trial
    • 6-Cell Lithium-Ion Battery
    • No Internal DVD or CD Drive
    • Standard Keyboard
    • HP TrueVision HD Webcam w/ integrated digital mic
    • 802.11 AC WLAN and Bluetooth(R) [2x2]
    This question was solved.
    View Solution.

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another.  Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please

    I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another.  Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
    I cannot for the life of me figure this out.

    What you need to do is connect your phone to iTunes but do not click sync.  Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes.  When it's done transferring, locate your phone on the sidebar and click it.  Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone.  After selecting your apps then you can sync.  Once you do this you should never have your problem anymore.

  • Iphone 3gs, audio echo on playback but ok on my computer, all other audio on ipod ok.

    My Iphone 3gs ipod has an echo when I playback 2 different audio downloads, these play without echo on my computer, all other audio on iphone ipod are ok.

    Never mind, after two hours searching I found the answer to my question. Adjusted the playback speed, I thought that was the problem but didn't know where to adjust it. FYI - now playing screen (don't know what to call it), to the right and below the progress bar there is a little box that has a number and an x in it this is the playback speed. Hope this helps any other novice out there. If there is no gray area at the top of the now playing screen with progress bar touch your screen and it should show up.

  • HT204150 I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help

    I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help?

    Also, what are the source of your contacts? are they created on the phone, or you synced from yahoo/hotmail etc.
    If thats the case, the circular arrow wont be visible but instead show "groups"
    Contacts from different accounts are not synced to iCloud.

  • Computer freezes -- PLEASE HELP

    Each time a new song starts on my iTunes, about 10 seconds into the song my memory usage for iTunes will shoot up from 53,000K to 85,000K and will cause everything I am doing on my computer to freeze up for about 5-10 seconds. Like I said, this happens for each successive song. I have a 13,000+ song library and did not have this problem with iTunes 4.9 -- I recently updated to 5.0.1 and started experiencing this. So, I tried uninstalling 5.0.1 and reinstalling 4.9, but the same problem was now happening there as well. This is NOT a problem with my hardware, it is more than sufficient to support this usage, and happens even when iTunes is the only program running on the computer. PLEASE HELP, it is very annoying to have to stop what I'm doing and wait for 5 seconds each time a new song starts.

    Boot from your original Tiger cd and run Disk Utility Repair Disk from there - it can repair directory problems which can't be fixed from normal Disk Utility.
    If that doesn't work, an archive and reinstall of Tiger might be best - it's pretty simple and can save weeks of trying to track down and fix an obscure problem. Just make sure you thoroughly backup first. Check Apple's website for instructions http://docs.info.apple.com/article.html?artnum=107120. Disconnect all peripherals while you reinstall.
    Once Tiger's reinstalled, download the combo update from here http://www.apple.com/support/downloads/ (Note - don't use Software update for this). Re-attach peripherals one-by-one to see if anything is still upsetting Tiger.
    I would then recommend you install third party software Macaroni, http://www.atomicbird.com/ to automate the necessary admin tasks needed to keep OSX in tip-top shape.
    2GHz dual G5, 23" panel   Mac OS X (10.4.7)  

  • This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator

    Here is our environment:  Windows Server 2008 x86 SP2 Terminal Server running Citrix XenApp5.0 with Office 2007 installed.  We have a Group Policy to restrict users from access the server's C:\ drive.  When our users open or save a Microsoft
    Word, Excel, etc. document they are presented with the following error.  "This operation has been cancelled due to restrictions in effect on this computer.  Please contact your systems administrator."  When our users click on the OK button it
    allows them to open or save the document.    If I remove the restriction to C:\ from our Group Policy, then everything is working fine.  Please tell me how to fix this problem. Thanks.

    Hi Jeffery,
    Unfortunately, I could not work around this and MS said it was by design. I even tried some clever stuff with symbolic link s but to no avail. I simply ended up informing my users to ignore the message and continue. i don't want anyone to be able to browse
    the C: drive so I'm leaving the NoViewOnDrives registry key in place. However, there is one possible workaround but for me , it didn't suit:
    Change the temp  location of the folder Outlook uses for attachments
    http://support.microsoft.com/kb/817878
    Also, I'd recommend forcing all attachments to open in read-only mode http://support.microsoft.com/kb/953621 
    Annoying but you can't have everything i guess :(

  • Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.

    Nevermind, I got it working.
    I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed.

  • Hi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

    HiHi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

    Hi Samantha,
    Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
    Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
    I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
    http://support.apple.com/kb/ts1275
    Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
    https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
    Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
    FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple.

  • Payment proposal not picking up all documents

    We have several credit memos for one vendor that are not picked up by the payment proposal run even though their due dates are within the payment run.  These credit memos are manually created through FB60 and not through MIRO.  In the payment proposal, the error log says "due items with currency USD, pmt method W - items total is >0".   The same payment proposal picked up all other invoices (for the same vendor) correctly.   These invoices have the same payment method as the credit memos and the credit memo due dates are prior to the payment date.
    If anybody can point me in the right direction as to what to look for, I'd appreciate it.
    rgds,
    Lanny

    Hi Ruslim,
    Please refer below OSS notes:
    Note 164835 - F110: Clearing credit memos and invoices
    Hope this helps.
    Pls assign points as way to say thanks

  • Best Way to Connect my REAL electric guitar to my computer? Please Help

    Anyone know how to Connect my REAL electric guitar to my computer? Please Help, thanks!

    HippeeBoy wrote:
    Anyone know how to Connect my REAL electric guitar to my computer? Please Help, thanks!
    http://www.ikmultimedia.com/stealthpedal/features/
    I'd previously purchased the Stealthplug by IK and really liked it. I wanted a wah/volume and got the Stealth Pedal. The current promo going through the end of December is a 4 for 1 special. If you by a qualifying product from IK, you will receive free downloads of IK Software. The free downloads are not partial or limited version of IK stuff but +full versions+.
    http://www.ikmultimedia.com/NewsDisplay.php?Id=2373
    For instance, I bought the Stealth Pedal packaged with AmpliTube Metal for $199. Once I registered the software and pedal, the registered user area you now have access to as a registered IK customer makes available the full software version of other IK stuff. For me, I downloaded AmpliTube Jimi Hendrix, Ampeg SVX and AmpliTube 2. Each full version is worth about $200 ( http://www.sweetwater.com/c707--IKMultimedia--Virtual_Instruments_Guitar_andBass ).
    So, anyway, a good deal for lots and lots of amps and an interface. I've had the Stealthplug since March and just got the pedal last week so I'm still breaking that in. However, very sturdy feeling and worked very well.
    Sure, it's $200 but you get tons of amps and I have to say (so far), they sound pretty good too. I haven't been through all of them much less even started on the Ampeg Bass stuff but I'd still be comodrtable considering myself an IK fanboy.....

  • Airport Express over All Home Audio Tuner

    I have an Airport Express hooked up to our all home tuner and trying to get the icon to show up in iTunes allowing me to choose between 'computer' and 'All Home Audio'. I have the green LED lit on the Airport Express, I have the right box checked to look for remote speakers, but can not get the icon to show up in iTunes. Any ideas?

    Duane,
    Thanks for the reply. I beleive so.... I was in applications/utility/airport express setup and ran through the wizard there. however, it appeared as if the end result was to connect my airport card in the iMac to my home wireless network. I did not see set up information asking me to configure the remote device that is plugged into the tuner???

Maybe you are looking for