X-fi Platinum front panel. h

Hello i have an Xfi platinum and can't seem to get the headphone and mic jack working. The optical out works but only seems to be stereo. The problem is every time i want to switch from 5. speakers to headset i have to physically unplug the green and plug the headset in there and the mic beside it. What i'd like to be able to do is leave the 5. speakers hooked up and just switch to the headphones as needed or even just have them acti've all the time and turn the volume down on. I did a full install of the creative disk so everything there seems to work. maybe it's just a setting i need to find? any help appreciated. Currently running XP 64 bit but can't get it to work under xp home or Vista 64 home premium. Did i provide enough info??

you may have already tried this, but have you set the option to detect headphones in Creative Audio Console?

Similar Messages

  • Problem with Audigy 2 Platinum Front Panel Input

    0Problem with Audigy 2 Platinum Front Panel Input? Hey everyone,
    Here's the background of the issue. I got a PS3 over the holidays for literally free
    I had my computer out in a testbed style. Plugged the PS3 into my monitor HDMI --> DVI cable, and Red/White into the front RCA jacks of the Front Panel (Aux 2). As soon as I plugged in the cable, I got sound out of my speakers and was able to enjoy my PS3 in 720p
    I put all of the components back into the case after cutting exhause and intake fan holes. I brought everything back to school, fired up the PC and PS3. Lo and behold, there is no more sound from the PS3. I know that PS3s are temperamental in moving, but I hooked the audio up to my TV and the sound came out just fine. The AD Ext cable looks like it's secure and in place. When I hooked up a mic and headphones to the front, they worked fine as well. However it seems to be just the AUX 2 RCA inputs that dont work anymore. Any ideas about how to fix this issue? Is there a function I have to turn on now in the software to allow sound to pass through? Any information would be wonderful!? I'm going to try an optical cable in the near future, just need to borrow one from a friend =/

    Problem Solved.
    I had moved my cards around for better airflow. I moved the SB Audigy card from the bottom PCI slot to the top. Thinking this might be the problem, I moved the video card back to the top slot PCI-E and the sound card to the bottom PCI slot. Sound is now working again. Thanks for the thread views?:smileytongue:
    Think that when I have to buy Win 7 for real if the problem would still persist if I moved the card again? Or is this a hardware limitation?

  • No sound from headphone on X-Fi Platinum Front Panel

    Hey,
    i just built it a X-Fi Platinum installed the drivers and checked if everything works. My Problem is i dont get any sound out of the headphone jack at the Front Panel.
    Headphone detection ist working as is the remote control.
    Any ideas what could cause this? I need that 2nd audio output.

    i have the exact same problem with vista!!!no sound from the front panel of x-fi platinum!i don't know what to do!

  • Audigy SB 2 ZS Platinum Front Panel not working-HELP

    Hey everybody. I'm new to this forum, but not to computers. I built my computer about 4-5 months ago, and here are my specs:
    Ultra MS Blue Dragon
    ASUS P5GD
    Intel P4 Processor 3.0GHz
    GB GeIL RAM
    6600 GT 28MB Video Card
    Samsung 20GB SATA HDD
    Lite-On and NEC DVD Dri'ves
    Ultra X-Connect 500 W PSU
    Creative SB Audigy 2ZS Platinum
    I got the 2ZS platinum from a friend, but I already had a regular 2ZS. I plugged in his front panel to my old 2ZS. The front panel did not work. I then got his 2ZS, just the sound card, and plugged in the front panel. It still did not work. I installed all the software and drivers, and nothing. My sound card works fine, it is just the front panel that doesnt work. Does anyone have any ideas?
    Thanks a ton,
    Derek
    P.S. The AD_EXT Cable fell apart a couple of times, but we put it back together. Could that be a problem? If so, where can I get a new AD_EXT Cable?

    ttt

  • X-Fi Platinum Front panel Power QUESTION

    ? Hi All, I have X-Fi Platinum. Does the front panel require A power connection. If so what kind of connector do I need? Run from the card to the front panel? Cant find manual on line!? THANKS IN ADVANCE

    This requires a four pin floppy power connector. If your case does not have one you can find a molex to floppy adapter very simply on online retailers.

  • Audigy 2 Platinum Front Panel

    I just built a new custom machine and I want to use my audigy 2 plantium. My new case is black and the front panel is white. Can I just purchase a new front panel that is black? Or can I just change the white face plate? It looks like the white face plate just clips on. There is nothing wrong with the device other than its an eye sore. I looked on creative's website and could not find anything about replacement panels. I really do not want to buy a new X-Fi Platinum and spend $99 bucks on a backup computer, as I already have a X-Fi in my main system.
    Thanks for the help.

    Actually I'm having the same problem too here.
    Did all the troubleshooting I could the only thing left is to test the AD_EXT cable.
    Anyone able to give some advise on this?

  • Audigy 2 Platinum Front Panel Connecti

    I recently began recording my band in our home studio. My mixing board is a Midas Venice 240 which has two balanced XLR outputs from the master bus. I am wondering what method I may use to connect this output to the /4" stereo input on the front panel of the Audigy 2 Platinum. If I just purchase a Y-adapter to combine the two channels into one XLR and then convert it to /4" TRS jack will both channels be preserved? Are there any sound quality issues that arise from this method of connection? I was hoping to get answers to these questions before wasting money buying unnecessary adapters.
    Thanks

    The BEST way to do this is to go to radio shack and buy two (yes 2) of their?XLR to /4" Impedence Matching Transformers, AND?one (yes )?dual /4" female TS (tip-sleeve) to single /4" male TRS (tip-ring-sleeve) "Y" cable. Unless your mixer also has /4" main outs as well as the XLR... then you can just use the Y cable and skip the transformers. Or you can use a /8" Y cable with the transformers (and stereo /4 to stereo /8 adapter) and go into the card's line in jack on the actual card. Which is how I did it for a year or more untill i got a firewire recording interface (and it worked darn good too with my Soundcraft mixer and some good microphones). Either way,?you need the transformers for optimal results. The reason is the mixer's output impedence and level doesnt match that of the soundcard's input... mixer will likely overdri've the card, or the signal will sound weak or noisy.. The transformers?are cheap and are darn handy for loads of recording functions, and will provide the Audigy with exactly the type of signal it needs, properly transformed from the mixer. If you do this, you can record ALL of the mixer channels IN STEREO with all the panning, effects, and levels preserved. If you have multitracking software like Cubase or similar, you can even record an individual instrument (or even 2 at once, one panned left, one right... each assigned its own track in your software), come back on a new track (or pair of tracks), and record a different instrumet (or 2) and build a multitrack recording one performance at a time. PS:? you CANNOT just hardwire the mixer outputs and combine them into a single channel. A mixer is needed to properly combine?signals. Don't do it
    !!! Have fun... and rock on.PSS:? make sure your overall cable is as short as possible. If you must run it for more than 6 feet then run it in XLR mode and convert it very close to the computer. The non XLR section of cable is an antenna for noise. The XLR section will be shielded against noise. Also, the transformers are kinda heavy so do not plug them into somthing and allow them to hang in the plug becasue the hanging weight will ruin your jack. Its best to run cables to the transformers, allowing them to lay on the floor... in a safe place where they wont get stomped on.
    Message Edited by ElectricUrinal on -28-200708:0 AM

  • Audigy 2 ZS Platinum - Front panel issues

    Hello there,
    I originally had the Creative Audigy 2 ZS Platinum and all was fine. It all worked and the world was happy. I then (won't go into details) managed to damage the card and whilst I still got sound, the front panel and the joystick port would not work. As it was only the card that was broken, I purchased a new Audigy 2 ZS card assuming I would be able to just stick the front panel connector back on and all would be hunky-dory.
    As you probably guessed, I am here, so all is not well. Whilst the game port now works, the front panel still does not respond to anything and I am at a loss. Is there some kind of jumper I need to switch or something? What have I done wrong.
    All input is more that welcome, thanks...

    i am having front panel issues. i think the damage to the card is a potential problem, but i don't think it's the cause for the panel not working. i think something is just seriously wrong with creative hardware. i really don't think pre-sales testing was performed extensi'vely enough. i have had more problems with my audigy 2 platinum in the 2.5 yrs i've had it than a new born baby. to make a long story short, i did a complete upgrade of my system, the only thing i kept was my case and audigy 2 and front dri've bay. i did nothing different than i had before, re-installed windows and everything. everything EXCEPT the front dri've bay works. i do get the red light from the optical out though, so there is power. i don't know what's wrong with this thing. all i can say is: creative you need to get your s**t together, you have as many issues with your sound blaster cards as microsoft has with windows. tech support: you need to do something for once and answer posts that people ask. i posted my question about this problem 7 months ago when it happened, guess how many repsonses i have. ZERO, NONE, NADA, NOT ONE RESPONSE. i don't blame forum users, not everyone knows, i blame tech support b/c you don't respond. i have no clue why, but do something, please.

  • Audigy 2 Platinum Front Panel Probl

    Hello everyone. Thank you in advance for any help.
    My problem is two-fold, let me begin with the first issues.
    Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
    Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

    Hello everyone. Thank you in advance for any help.
    My problem is two-fold, let me begin with the first issues.
    Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
    Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

  • MSI K9N PLATINUM FRONT PANEL AUDIO

    Hi everybody
    I recently mounted an MSI K9N Platinum mainboard. When connecting front panel audio from case connectors on JAUD1, case connectors are marked as follows:
    MIC POWER
    MIC IN
    GROUND
    R-RET
    L-RET
    R-OUT
    L-OUT
    which does not match with those written on mainboard user manual for JAUD1 which are FRO PIN 1 TO 9 as follows:
    PORT1L
    GROUND
    PORT 1R
    PRESENCE
    PORT 2R
    SENSE1_RETURN
    SENSE_SEND
    KEY
    PORT2L
    SENSE2_RETURN
    .I´ve tried to connect it on many combinations but yet it is not working.
    Could someone tell me the right way to do it?
    Thanks in advance.

    I think you better ask this question to the manufacturer of the frontpanel stuff, as I have no clue.

  • Audigy 2 ZS Platinum front panel under VISTA

    I've got the card and front panel installed and apparently working, except one issue. I'm trying to pipe in sound from a stereo receiver to the front panel auxiliary 2 inputs, so I can listen to a sporting event(broad cast on AM) over my pc and record it. When I turn on the receiver and hook it up, I hear nothing. When I start the recording software and record, it records from the auxiliary 2 perfectly and I can hear the broadcast fine on playback. So, the question is, why can't I hear it li've over my speakers?!?! Extroadinarily frustrating! VISTA has no volume control display(that I could find) like XP did where I could check the auxiliary 2 levels, etc.
    Again, I'm running VISTA Ultimate 64 bit and have the most current Creative sound drivers installed and all other sounds from within programs seem to be working 00%.
    Thanks for any help!

    Nothing huh? Nobody has any idea about this or knows of another thread where this question was answered?
    Thanks in advance if you can help out!

  • MSI P965 Platinum - Front Panel Audio u/s

    Finally after managing to get XP Pro SP1 CD to install, I have a stable system, and thanks to those whom freely gave advice.
    But we hit the next issue with this motherboard, the front panel audio.
    Firstly the Realtek detection software doesn't detect anything plugged into the front panel.
    Connected the cables as follows from my Coolermaster Stacker case;
    mobo                = case wires/colour
    pin1 aud-mic      = mic-in - yellow
    pin2 aug-gnd      = gnd - black
    pin3 aud-mc-bas = mic-pwr - red
    pin4 aud-vcc      = empty
    pin5 aud-fpout-R = R out - green
    pin6 aud-ret-R    = R ret - green
    pin7 hp-on          = empty
    pin8 key
    pin9 aud-fpout-L = L out - white
    pin0 aud-ret-L    = L ret - white
    The above pin out gives nothing at all, but audio from rear ports on the computer motherboard is fine.
    I also tried the following,
    where the microphone wires were left disconnected, therefore just the speakers plugged into the front panel audio header
    mobo                = case wires/colour
    pin1 aud-mic      =
    pin2 aug-gnd      = gnd - black
    pin3 aud-mc-bas =
    pin4 aud-vcc      = empty
    pin5 aud-fpout-R = R out - green
    pin6 aud-ret-R    = R ret - green
    pin7 hp-on          = empty
    pin8 key
    pin9 aud-fpout-L = L out - white
    pin0 aud-ret-L    = L ret - white
    The above still gave me no audio out from the front panel.
    Intrestingly if I leave the front panel audio header blank, I still get rear audio fine, where I would have expected to have put jumpers across the L and R outputs as is the norm.
    I have removed the front panel from the computer to ensure that the wires terminate OK, and have not been pulled out/off.
    Have I plugged in the wires correctly?
    Is there some hidden setting that I have missed, I admit that I do not like the Realtek audio software?
    I cannot find any way to boost the microphone input since Realtek audio software has been installed.
    One day case/mobo manufactures will use a standard for the front panel headers and front panel audio headers, and we will have a simple single plug to insert, rather than a group of single fiddly connectors that have to be attached to a header that was at the last minute attached to the motherboard as far away from the front of the case, and in the darkest most fiddle corner.
    Oh well......
    Cheers

    AaronYuri - you're are so right there my friend.  I just pity Joe User whom might attempt such a move themselves.
    In the end my entire issue was software related, and that has to be blamed on Realteks software, far too many options approached from far too many different angles. Audio is really simple, plug your cables in, and it should just work, certainly in the simple case of 2-1 speakers and a microphone. Why exactly it took a couple of hours to figure out how to get the front panel microphone to be seen in the first place, let alone any signal, is beyond me.
    So my cables were all connected correctly as per the MSI manual, confirmed by my Abit manual and other post here and on other forums.
    In the Realtek MSI audio software, on the I/O Audio tab, connector settings, I had to select 'disable front panel jack detection' and 'mute rear panel output when front headphones plugged in'. The other option here 'enable auto pop up...' is unchecked.
    After this the Realtek software mentioned something about a new profile had been set up?
    I then went to Windows Control Panel, Sounds and Audio devices, and selected the voice tab, on this page I selected 'mic IN at front panel [pink]' from the drop down list for Voice Recording'. Proceeded to 'test hardware' and the microphone is now working. This option to select the input in the drop down list was not available before.
    All a bit of POKE and HOPE.
    But we seem to be there.

  • P35 Platinum front panel audio with Antec P180 case?

    God I have a headache after reading all those "front panel audio" threads.  Why can't mb's all use the same freaking pinouts!!!!
    The case doesn't have a HD front panel.
    MB pinouts are:
    1. Mic_L         (MIC Left Channel)
    2. GND
    3. MIC_R        (MIC Right Channel)
    4. PRESENCE#
    5. LINEout_R   (analog port right channel)
    6. MIC_JD       (MIC jack detect)
    7. Front_JD
    8. NC (empty)
    9. LINEout_L    (analog port left channel)
    10. LINEout_JD
    Case Front Panel connector is a preconfigured block with pigtails hanging off in case it doesn't match up.
    1. MIC Signal
    2. MIC Power (MIC BIAS)
    3. Ground
    4. FPOUT-R (front right)
    5. FPOUT-L (front left)
    6. RET-R (rear right)
    7. RET-R (rear left)
    glaring differences are the ground and the MIC connectors.
    How do I connect these?  I don't want to fry anything.
    Thanks.

     They do have the same pinouts. There are two standards is the reason for two different pinouts. It's just that your MB is Intel HD and your case is AC-97.
     For Intel® High Definition Front Panel Audio 
    Pin  Signal Name  Description 
    1 PORT 1L Analog Port 1 - left channel (Microphone)
    2 GND Ground
    3 PORT 1R Analog Port 1 - right channel (Microphone)
    4 PRESENCE# Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected
    5 PORT 2R Analog Port 2 - right channel (Headphone)
    6 SENSE1_RETURN Jack detection return for front panel (JACK1)
    7 SENSE_SEND Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network
    8 KEY  Connector key
    9 PORT 2L Analog Port 2 - left channel (Headphone)
    10 SENSE2_RETURN Jack detection return for front panel (JACK2) 
      For AC-97 Front Panel Audio 
    Pin  Signal Name  Description 
    1 MIC Front panel microphone input signal (biased when supporting stereo microphone)
    2 AUD_GND Ground used by analog 
    3 MIC_BIAS Microphone power / additional MIC input for stereo microphone support
    4 AUD_GND Ground used by analog audio circuits
    5 FP_OUT_R Right channel audio signal to front panel (headphone drive capable)
    6 FP_RETURN_R Right channel audio signal return from front panel (when headphones unplugged)
    7 AUD_5V Filtered +5 V used by analog audio circuits
    8 KEY No pin
    9 FP_OUT_L Left channel audio signal to front panel (headphone drive capable)
    10 FP_RETURN_L Left channel audio signal return from front panel (when headphones unplugged)

  • 975x platinum front panel audio

    hi all. ive read every thing on this forum i could find, but can not get the front audio panel connectors to work. my case(sunbeamtech silent storm) has the single molded connector that only fits one way on mobo. in the msi audio control panel, nothing happens when i plug in mic or headphones, or if i disable detection of the jacks. im at the end of my rope. please help!

    I had the same problems. I assume that the "AC97" jack is plugged in to the JAUD1 connector of your mainboard.  You have to plug in the other jack (HD Audio) to the JAUD1 connector, after this the front panel audio should work.
    Look here https://forum-en.msi.com/index.php?topic=104480.0 ...

  • Can Audigy 2 Platinum front panel connect to X-fi?

    Hi,
    I'm about to build a new i7?system and am debating buying an X-Fi Titanium (non-fatality)?to replace my Audigy 2 Platinum. Is it possible to connect the front dri've bay from the platinum to the X-Fi card? If not, I'm wondering if it is worth the switch. I'm not keen on paying any more than the price of the standard titanium card, so am not looking at the pro, etc.
    I'd appreciate any thoughts. Thanks!
    Message Edited by motility on 05-05-2009 09:44 AM

    Oh well, it is already ordered. It is rather absurd in this day and age that Ceati've charges 00 plus dollars premium?for such simple functionaility. Even M-Audio seems to provide better connectivity solutions on its low end interfaces. I have one of those. Guess I can just get an RCA to /4 inch or XLR adaper.
    Still looking forward to the X-fi, though,

  • Audigy 2 platinum front panel h

    Hi
    I have got a problem with my audigy 2 platinum. I want to be able to plug in a guitar or other audio devices for that matter into the front bay. However i go into surround mixer to enable the device but can't find line in 2 or aux 2 listed anywhere. So no sound is heard. I have confirmed there is power to the front hub by checking the optical connection and confirming there is a red light. How can i get the inputs to work?. How do i enable them?.
    Any advice would be much appreciated.
    Many Thanks
    Chris

    Hi
    I have got a problem with my audigy 2 platinum. I want to be able to plug in a guitar or other audio devices for that matter into the front bay. However i go into surround mixer to enable the device but can't find line in 2 or aux 2 listed anywhere. So no sound is heard. I have confirmed there is power to the front hub by checking the optical connection and confirming there is a red light. How can i get the inputs to work?. How do i enable them?.
    Any advice would be much appreciated.
    Many Thanks
    Chris

Maybe you are looking for