X-Fi Platinum Win 7 64bit

I am still having issues with the SB software/drivers not detecting a card in my computer. I have the latest BIOS for my motherboard, which resolved the issue of IRQ conflicts between my X-Fi and video card, and Win 7 64bit is detecting my card, but with the triangle exclamation error. When I attempt to install the latest software/drivers from Creative it tells me that it does not detect any hardware in my system. I have also tried the method of using Windows update, but that also fails, is anyone else having issues with this yet? My system is: Asus P5N-E SLI Intel Q6600 2.4GHz Quad eVga 9600GT PCI-E WD Raptor 74Gb WD 250Gb Creative SB X-Fi Platinum Model number SB0460 Cheers

Update about my sistuation. I have installed the card in another computer I have, and am still having same problems. I tried it in both PCI slots, Windows XP detects card, but when attempting to install drivers/software it informs me that there is no supported product in my computer. Wondering if I should give up on trying to use this card, unless anyone has any suggestions, cheers.
MSI G33M Mainboard
XFX GForce 8600GT PCI-E
Intel Q6600 2.4GHz
2xWD 80Gb
SB F-Fi Platinum

Similar Messages

Firefox 24.0 will not start in Win 7 64bit environment on Dell N5010 i3 Inspiron after upgrade/fresh instal

My Computer Notebook is a Dell N5010 Inspiron with an i3 processor running a Win 7 64bit OS. Firefox has always run smoothly on it. I could not exactly determine when it started failing to open after each attempt to start but I think it was when I accepted the offer to upgrade to Firefox 24.0. I have since then upgraded at least 5 times without any change in performance. From another customer experience in the Support website I downloaded the Setup file and tried fresh installation with the same result. What I have not tried is removal of the Profile because I do not know how to replace the Profile file.

Try to start windows in safe-mode [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true Windows in safe-mode]. Also see [[Firefox won't start - find solutions]]

Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 Other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1.

Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.

Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

HT1386 my iPhone will no longer sync with iTunes. running a pc with win 8/64bit

why won't my iPhone sync with iTunes? i'm running latest version of iTunes on a PC OS Win 8/64bit?

It's ridiculous how difficult this is. I've reinstalled iTunes, played with the settings, and it just doesn't work.
It will happily sync my computer library (which has nothing in it) with my phone library (589 songs) thereby (presumably) wiping out the 589 songs.
But I can't get it to sync the other way and copy the iPhone library to the computer.
It also puts new CDs on the computer but not on the phone, where I want them.
Is there anyone at Apple that cares about this abject stupidity in the software?

Ppcs5 on win 7 (64bit) runtime error message when starting PPRO

Just installed cs5 on a dell win 7 64bit machine, and when I start ppro cs5 I get an error message that says "Runtime Error!.... this application has requested the Runtime to terminate it in an unusal way...
On a different machine (win 7 (64 bit), I don't get the error message. Anyone else experience this issue and know how to resolve... is it an Adobe problem or a Microsoft problem?

Did you got any error while installation ?
Please right click and launch Premiere as an administrator ...

Laserjet 1320 on win 7 (64bit) - cannot access from a networked XP Pro machine?

I have a Laserjet 1320 and a Officejet 6450 attached to a win 7 (64bit) machine - both work fine.
Have a home workgroup network established with an XP pro machine. Both printers are "shared" etc..
I can access the Offiejet from the XP machine, but cannot get access to the Laserjet. Claims that
the proper Driver cannot be located. Have downloaded the PCl5 driver to the Win 7 machine, but when
I point the XP machine to the HP PCL5 Driver folder on the win 7 machine it still cannot find the proper driver.
Any help will be appreciated.

Hi Don
Thanks for the reply.
The version of Visual Studio being used is 2002 (getting on a bit now).
We had a play about with the way we installed the MSI installer we had created that installs the Crystal Reports runtimes (merge modules) and managed to get it to work on both Windows 7 32bit and 64bit.
The solution was a weird one, but seemed to work (but was different to what I had done before to get it to work). We made sure the MSI was local on the PC and right-clicked the MSI and selected the ''Troubleshoot Compatibility' ' option. Not 100% why this would work, but it seems to have done the trick.
Many thanks for your help.
David.

I bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do hlp?

i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
thanks in advance,,,

ahmad_uetlhr09 wrote:
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
Boot Camp does not come on DVD, what did you install.

Problems with downgrade from Win 8.1 to Win 7 64bit on Satellite S70-A-11H

Hi,
My daughter already has a Tosh laptop with Win 7 64bit which is several years old and has seen better days, so for Christmas I bought her a new S70-A-11H notebook with Win 8.1 pre-installed.
She hates it. In fact she will not use the new laptop at all unless it has Win 7 on it.
For people that do not use a tablet or a Windows phone and like a desktop feeling machine Windows 8 does not work for us.
Now I work in a niche IT role using numerous OS such as Microsoft Windows (XP, Win7, Server 2003, Server 2008) and Solaris as well as a bit of RedHat.
Now my Win8 experience is zero.
I thought it would be simple enough to install a retail copy of Win7 with SP1 64bit onto this notebook.
Not so easy as it turns out.
When I boot from the Win 7 install DVD the installer program locks up as the Win 7 logo starts to appear on the screen. If I try an install in safe mode the last driver that appears to load when the lock up occurs is disk.sys.
So the question is how can I install Win 7 64bit SP1 onto this notebook using a retail copy of Win7?
Any ideas would be much appreciated.

*I found the reason for this problem* and the solution outside of this forum.
If anyone else is interested _the issue is cause by the use of GPT partions on the 8.1 build._
To overcome this and install a fresh copy of Win7 you can do this:
-Shut down Windows 8 while pressing the Shift key to completely power off.
-Power on and press F2 while the Toshiba logo is displayed to enter the UEFI Setup Menu.
-Go to the Security tab and set the "Secure Boot" setting to "Disabled".
-Go to the Advanced tab, enter "System Configuration" and set the Boot Mode to "CSM Boot."
-Press F10 to save and exit.
Go to http://gparted.sourceforge.net/ and download gparted boot image. Make bootable gparted cd and use it to delete the GPT partitions on the HDD.
Now just install Win7 64bit as you normally would creating whatever partitions you like during the install process. Of course you must have a new licence key for Win7 for this to work.
To finish off you will need to download all the required drivers from the Toshiba website to suit Win7 64bit. This is quite tedious as some of the files are huge. I got just the basics that I thought I'd need and that ended up being over 1Gb of files.
I'm so pleased I managed to get rid of that nasty Win8 interface.
This is probably not the only way to do this, but this worked for me.

Re: Downgrade from Win 7 64bit to 32 bit

I've bought a Satellite T110-11U with embedded OEM Win 7-64bit
I tried te recover with media recovery tool but the control panel don't let me choose between 32/64 bit mode
Most of software used in my business need 32bit mode
I tried too to use the recovery DVD from my Satellite L500-1WM, with Win7-32bit but windows activation key doesn't work
How can i downgrade my embedded system
Please to help me

i have a question. My model is L555 -11L PSLWSE it came with winsdows 7 x64. I will like to switch it back to 32 bit. I have windows 7 OS n other language. but i am not sure if i do this, i will be able to have all the utilities and drivers that came with the factory settings. I checked the drivers and utilities site and looks that i can have (if not all of them) many of them, What do you think. I will appreciate very much your opinion. I would like to ask you as well wht do you think concerning "downgrading" from x64 to x86 having the future in mind. is the best thing to do? thanks for your time and your opinions

Problem with Acrobat 8 Pro on a WIN 7 64bit system

I have installed Acrobat 8 Pro and my Win 7 64bit machine and am having trouble printing web pages to pdf
but can find no exact reason why the just hang in the spooler just saying they encountered an error.
Any help with that?

The updates may resolve the issue. To update you may have to go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ to get the updates and install them in order.

Help file for CS5 not available on Win 7 64bit

Hi,
I try to display the help file from within PS CS5 and that is not working. I can neither watch the community help online nor download it for offline use since the app seems unable to connect to a working online source.
It shows "The requested URL /de_DE/Photoshop/cs/using/AH_HOME.html was not found on this server."
All apss have been updated to the newest release, everything else is working fine.
I use Win 7 64bit German, PS is also installed in German.
Any ideas?
Using a browser the help content is reached via URL http://help.adobe.com/de_DE/photoshop/cs/using/index.html
Maybe the software is looking for AH_HOME.html in error instead of index.html.
Nachricht geändert durch Beholder003

Hallo Beholder (und hfuhr)
(wir sprechen ja alle deutsch ... ;-)
Das hatte hfuhr weiter oben wohl nicht gelesen, dass der Aufruf der Online-Hilfe wie beschrieben ja funktioniert. Vor irgendeinem Update (oder nach Grundinstallation?) muss der download mal gegangen sein, denn ich hatte einen Teil der Photoshop Hilfe offline. Bei meinen Experimenten habe ich diese gelöscht (weil nicht aktualisierbar) und der Download steht eben wie beschrieben für Photoshop nicht mehr zur Verfügung. Ich habe nun beschlossen, "not to waste my time". Da ich, wenn ich die Hilfe gelegentlich brauche, an einem Arbeitsplatz sitze, wo ich ebenso das Internet brauche (und entsprechend habe), ist die Online-Hilfe auch verfügbar (und dafür wird mein Rechner nicht zugemüllt ;-).Ok, dem gegenüber steht vielleicht der (dein?) Wunsch, nicht immer online zu sein und dennoch die Hilfe verfügbar zu haben, aber was hilft's, wenn wir nicht wissen wie es zu lösen ist :-(
Wenn Adobe dazu nichts einfällt oder keinen Kommentar abgibt, lasse ich es dabei bewenden. Es würde für mich so aussehen, dass dieser Download von Adobe derzeit nicht zur Verfügung gestellt wird bzw. die Funktionalität der Online-Hilfeseite "gestört" oder nicht gewünscht oder sonstwas ist?!
Grüße
MCMattyTheCook

Image acquisition slower than expected on Win 7 64bit

Hi all,
I wanted to know if anyone had issue after upgrading OS from Windows XP to Windows 7 64bit.
I had a fairly big project the runs fine on Windows XP, hardware is computer + PCIe 1433 + Basler A504 + external trig source. The frame size 1000*128 pixel so I can acquire at 4kHz. This works fine. NI Software is LV 2011 SP1 + lastest VDM and VAS.
I've tried to switch to Windows 7 64bit with LV 2011 SP1 + VDM + VAS all in 64bit versions and the acquisition doesn't work as I expect.
I've put together a test VI that configures the acquisirion in a similar way that my app does (triggered ring acquisition) with my external trig source set at 4kHz, when I run it, instead of having a 4kHz frame rate I get ~250Hz frame rate.
I also tried triggered acquisition in MAX because I know MAX gives me 2 information : display frame rate and acquisition frame rate, both appear to be ~250Hz.
I contacted NI about this issue, an application engineer has been able to reproduce the issue with similar hardware and we're trying to identify the reason.
Anyone has a clue?
ps : here's the code used to test the acquisition on Win 7 64bit.
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
TestAcqu_64bit.zip ‏99 KB

Hi TiTou,
Please make sure that you are not triggering the camera and the frame grabber board.Sending a trigger signal to the camera in order to trigger acquisition of every frame. In this case, there is no need to trigger the frame grabber board as well because the camera is being triggered directly. What was causing the acquisition to run at half the triggered frame rate was the way the signals lined up. The camera begins acquiring on the rising edge of the trigger pulse. Once a rising edge is received, FVAL goes high and remains high as long as the camera is exposing. It then goes low until another trigger pulse is received.
At the same time, if you are triggering each buffer on the frame grabber, the frame grabber waits to begin reading data from the camera until a rising edge is received, and then begins read out once FVAL goes low. The result is that the frame grabber begins reading out the current frame, which takes about as long as the camera takes to acquire a frame. So while the frame grabber is reading out the data, the camera receives the next trigger pulse and begins acquiring the next frame. However, the frame grabber is still reading out the previous frame and thus ignores the trigger pulse until it finishes, resulting in an acquired frame rate that is exactly half of the triggered rate. At lower rates, there is enough time for the camera and the frame grabber to acquire the frame off the same trigger pulse and "re-arm" before the next pulse arrives.
Elmar
PS: Please also make sure the exposure time is lower as 161us.

Itunes 10.5 on win 7 64bit, AppleMobileDeviceHelper has stopped working.

itunes 10.5 on win 7 64bit, AppleMobileDeviceHelper has stopped working.

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

How to get 64 bit in Photoshop CC (with Win 8 64bit)?

My Photoshop CC is only 32bit. I need 64bit. I use Win 8 64bit und 16GB Ram.

both 32bit and 64bit are installed if the installed detects a system that supports 64 bit.
check you programs directory.

X-Fi Platinum Win 7 64bit

Similar Messages

Maybe you are looking for